Providing Fire Consultancy Services & Execution of Fire Protection System for various buildings at all centres of Navsari Agricultural University

Name of Work:- Providing Fire Consultancy Services & Execution of Fire Protection System for

various buildings at all centres of Navsari Agricultural University

SR.NO. ITEM DESCRIPTION QTY Rate PER

PART-1 -CONSULTANCY

To provide Fire Consultancy Services including Designing, Estimating, Testing,

Monitaring, Commissioning, Training, Inspection, Fire Safety Plan

Approval(FSPA), Obtaining Fire Safety Certificate (NOC), preparing

architectural floor plan/ Drawing wherever required for planning of fire safety

& protection system and Related Work For Providing Approved Fire Protection

System services AS PER NBC CODE & GUJARAT FIRE PREVENTION SERVICES at

all campus of NAU as per terms & conditions of the of this tender documents.

• This charges will be paid on Final bill Amount (without GST) of each

• Amount paid to government offices in this regard via

Challan/receipt will be paid separately during Final bill after submission of

original Challan/Receipt.

PART-2 - EXECUTION

SR.NO. ITEM DESCRIPTION Rate PER

Supplying, installing, testing and commissioning of GI 'C' class pipe line

(HEAVY DUTY) confirming to IS 1239 with Reducers, elbows, flanges. Including

necessary flanges, laying of pipe, proper supports at bottom. The pipes shall

be painted with primer & Paint (1 COAT OF ZINC OXIDE PRIMER AND 2 COATS

OF PO RED PAINT) using approved type, M.S. supports at standard spacing,

anchor fasteners, bolts, nuts, clamps, rails "U" & threaded bolt, Including

cutting, Welding, fixing in / on walls, ceiling by using the supports etc.

Complete with all accessories as per approved drawings, specicification and

direction of the Engineer-in-Charge. MAKE - JINDAL / APPOLO / ASIAN

Supplying, installing, testing and commissioning of GI 'C' class pipe line

(HEAVY DUTY) confirming to IS 1239 with Reducers, elbows, flanges. Including

necessary flanges, laying of pipe, proper supports at bottom. The pipes shall

be painted with primer & Paint (1 COAT OF ZINC OXIDE PRIMER AND 2 COATS

OF PO RED PAINT) using approved type, M.S. supports at standard spacing,

anchor fasteners, bolts, nuts, clamps, rails "U" & threaded bolt, Including

cutting, Welding, fixing in / on walls, ceiling by using the supports etc.

Complete with all accessories as per approved drawings, specicification and

direction of the Engineer-in-Charge. MAKE - JINDAL / APPOLO / ASIAN

SR.NO. ITEM DESCRIPTION Rate PER

Supplying, installing, testing and commissioning of GI 'C' class pipe line

(HEAVY DUTY) confirming to IS 1239 with Reducers, elbows, flanges. Including

necessary flanges, laying of pipe, proper supports at bottom. The pipes shall

be painted with primer & Paint (1 COAT OF ZINC OXIDE PRIMER AND 2 COATS

OF PO RED PAINT) using approved type, M.S. supports at standard spacing,

anchor fasteners, bolts, nuts, clamps, rails "U" & threaded bolt, Including

cutting, Welding, fixing in / on walls, ceiling by using the supports etc.

Complete with all accessories as per approved drawings, specicification and

direction of the Engineer-in-Charge. MAKE - JINDAL / APPOLO / ASIAN

Supplying, installing, testing and commissioning of GI 'C' class pipe line

(HEAVY DUTY) confirming to IS 1239 with Reducers, elbows, flanges. Including

necessary flanges, laying of pipe, proper supports at bottom. The pipes shall

be painted with primer & Paint (1 COAT OF ZINC OXIDE PRIMER AND 2 COATS

OF PO RED PAINT) using approved type, M.S. supports at standard spacing,

anchor fasteners, bolts, nuts, clamps, rails "U" & threaded bolt, Including

cutting, Welding, fixing in / on walls, ceiling by using the supports etc.

Complete with all accessories as per approved drawings, specicification and

direction of the Engineer-in-Charge. MAKE - JINDAL / APPOLO / ASIAN

Supplying, installing, testing and commissioning of GI 'C' class pipe line

(HEAVY DUTY) confirming to IS 1239 with Reducers, elbows, flanges. Including

necessary flanges, laying of pipe, proper supports at bottom. The pipes shall

be painted with primer & Paint (1 COAT OF ZINC OXIDE PRIMER AND 2 COATS

OF PO RED PAINT) using approved type, M.S. supports at standard spacing,

anchor fasteners, bolts, nuts, clamps, rails "U" & threaded bolt, Including

cutting, Welding, fixing in / on walls, ceiling by using the supports etc.

Complete with all accessories as per approved drawings, specicification and

direction of the Engineer-in-Charge. MAKE - JINDAL / APPOLO / ASIAN

Supplying, installing, testing and commissioning of GI 'C' class pipe line

(HEAVY DUTY) confirming to IS 1239 with Reducers, elbows, flanges. Including

necessary flanges, laying of pipe, proper supports at bottom. The pipes shall

be painted with primer & Paint (1 COAT OF ZINC OXIDE PRIMER AND 2 COATS

OF PO RED PAINT) using approved type, M.S. supports at standard spacing,

anchor fasteners, bolts, nuts, clamps, rails "U" & threaded bolt, Including

cutting, Welding, fixing in / on walls, ceiling by using the supports etc.

Complete with all accessories as per approved drawings, specicification and

direction of the Engineer-in-Charge. MAKE - JINDAL / APPOLO / ASIAN

SR.NO. ITEM DESCRIPTION Rate PER

Supplying, installing, testing and commissioning of GI 'C' class pipe line

(HEAVY DUTY) confirming to IS 1239 with Reducers, elbows, flanges. Including

necessary flanges, laying of pipe, proper supports at bottom. The pipes shall

be painted with primer & Paint (1 COAT OF ZINC OXIDE PRIMER AND 2 COATS

OF PO RED PAINT) using approved type, M.S. supports at standard spacing,

anchor fasteners, bolts, nuts, clamps, rails "U" & threaded bolt, Including

cutting, Welding, fixing in / on walls, ceiling by using the supports etc.

Complete with all accessories as per approved drawings, specicification and

direction of the Engineer-in-Charge. MAKE - JINDAL / APPOLO / ASIAN

Supplying, installing, testing and commissioning of GI 'C' class pipe line

(HEAVY DUTY) confirming to IS 1239 with Reducers, elbows, flanges. Including

necessary flanges, laying of pipe, proper supports at bottom. The pipes shall

be painted with primer & Paint (1 COAT OF ZINC OXIDE PRIMER AND 2 COATS

OF PO RED PAINT) using approved type, M.S. supports at standard spacing,

anchor fasteners, bolts, nuts, clamps, rails "U" & threaded bolt, Including

cutting, Welding, fixing in / on walls, ceiling by using the supports etc.

Complete with all accessories as per approved drawings, specicification and

direction of the Engineer-in-Charge. MAKE - JINDAL / APPOLO / ASIAN

Supplying, installing, testing and commissioning of GI 'C' class pipe line

(HEAVY DUTY) confirming to IS 1239 with Reducers, elbows, flanges. Including

necessary flanges, laying of pipe, proper supports at bottom. The pipes shall

be painted with primer & Paint (1 COAT OF ZINC OXIDE PRIMER AND 2 COATS

OF PO RED PAINT) using approved type, M.S. supports at standard spacing,

anchor fasteners, bolts, nuts, clamps, rails "U" & threaded bolt, Including

cutting, Welding, fixing in / on walls, ceiling by using the supports etc.

Complete with all accessories as per approved drawings, specicification and

direction of the Engineer-in-Charge. MAKE - JINDAL / APPOLO / ASIAN.

Supplying, installing, testing and commissioning of S.S. 304 _SINGLE

OBLIQUE - FIRE HYDRANT LANDING VALVE ISI _ Supply of fire hydrant 63MM

single oblique pattern hydrant flange type landing valve with female type

instantaneous coupling outlet including flanges, Nut & Bolt inlet to ASA

lbs rating and to IS: 5290/ab. The hydrant system as specification. MAKE -

AAAG/ULTRAFIRE/NEWAGE

Supplying, installing, testing and commissioning of ISI _FIRE HOSE REEL WITH

MS DRUM _Supplying of hose reel & MS drum unit with 25MM dia,.

Thermoplastic type wire braided high pressure water hose Type - II as per IS

11 12585/ IS:444 with ISI (2 ply branded) working pressure @ 8.2kg/cm2 and 1.00 7000.00 Nos.

bursting pressure @ 22.2kg/cm2, 30mtr long with 19mm dia shut off jet spray

nozzle to IS 903 & hose reel to IS 884 complete with wall mounting bracket

having 25mm dia ball valve etc. MAKE - AAAG/ULTRAFIRE/NEWAGE

Supplying, installing, testing and commissioning of ISI _FIRE RRL HOSE PIPE

_Fire hydrant hose pipe RRL TYPE A (WHITE COLOR) as per IS 636, Size 63MM

12 dia 15Mtr long with no-controll precolated, complete with male female 1.00 4800.00 Nos.

instantaneous SS coupling and wire binding. Test pressure 36kg/cm2, working

pressure 18kg/cm2. MAKE - AAAG/ULTRAFIRE/NEWAGE

SR.NO. ITEM DESCRIPTION Rate PER

Supplying, installing, testing and commissioning of ISI _FIRE RRL HOSE PIPE

_Fire hydrant hose pipe RRL TYPE B (RED COLOR) as per IS 636, Size 63MM

13 dia 15Mtr long with no-controll precolated, complete with male female 1.00 7200.00 Nos.

instantaneous SS coupling and wire binding. Test pressure 48kg/cm2, working

pressure 26kg/cm2. MAKE - AAAG/ULTRAFIRE/NEWAGE

Supplying, installing, testing and commissioning of SS 304 SHORT BRANCH

PIPE WITH NOZZLE ISI _ Short branch pipe with nozzle for jet 63mm dia

200mm bore as per IS 903 - SS Nozzle 63x19mm dia size to IS 903, Working

pressure at 8kh/cm2 flow at 180lpm MAKE - AAAG/ULTRAFIRE/NEWAGE

Supplying, installing, testing and commissioning of Hose cabinet to

accomodate 1 sets of hose of 15mt length 1 branch pipe with nozzle. The

15 cabinet is made of 18 Gauge MS sheet with a 1 door , glass font with hinged 1.00 2000.00 Nos.

door and lock. The cabinet is painted to scarlet red colour & wall mounted.

(AS PER IS) (ISI) MAKE - AAAG/ULTRAFIRE/NEWAGE

Supplying, installing, testing and commissioning of The 4-way breeching

inlets With 150mm Dia Butterfly Valve, has 4 x 2½” Instantaneous male non-

return valve inlets including flanges, Nut & Bolt. MAKE -

AAAG/ULTRAFIRE/NEWAGE

Supplying, installing, testing and commissioning of The 2-way breeching

inlets With 100mm Dia Butterfly Valve,has 2 x 2½” Instantaneous male non-

return valve inlets including flanges, Nut & Bolt. MAKE -

AAAG/ULTRAFIRE/NEWAGE

Supplying, installing, testing and commissioning of ISI _MECHANICAL FOAM

MONITOR With Dia Butterfly Valve_ 360DEGREE ROTATION. Stand post

type_ Hot dip galvanized carbon steel waterway with solid base SS nozzle &

18 water foam nozzle with PVC pipe. Size; 63 mm, Colour _ Red, Features- Flow 1.00 17300.00 Nos.

rate 1750 litter/minute at 7 bar vertical jet 25 m & horizontal jet 45 m.

Movement by handle & manual lock including flanges, Nut & Bolt. MAKE -

AAAG/ULTRAFIRE/NEWAGE

Supplying, installing, testing and commissioning of PIPE WRAPPING COATING

ROLL TAPE For UNDER GROUND PIPE LINE _ 1MTR X 10MTR X 4MM THICK

ROLL_ CLEXOPIPE-PWT 4MM, (THIS ROLL IS LONG LASTING & PROVIDE HIGH

19 ANTICORROSIVE PROTECTION) PIPE WRAPPING COATING ROLL TAPE & FIRST 1.00 3400.00 Mtr.

APPLY SOLVENT BASED CLEXODAM-PRIME @ 0.3-0.4L/SQMT AS PER IS: 3384 -

1986. MAKE :- PIPEKOT/CLEXO Engg.

Supplying, installing, testing and commissioning of PIPE WRAPPING COATING

ROLL TAPE For UNDER GROUND PIPE LINE _ 1MTR X 10MTR X 4MM THICK

ROLL_ CLEXOPIPE-PWT 4MM, (THIS ROLL IS LONG LASTING & PROVIDE HIGH

20 ANTICORROSIVE PROTECTION) PIPE WRAPPING COATING ROLL TAPE & FIRST 1.00 2200.00 Mtr.

APPLY SOLVENT BASED CLEXODAM-PRIME @ 0.3-0.4L/SQMT AS PER IS: 3384 -

1986. MAKE :- PIPEKOT/CLEXO Engg.

Supplying, installing, testing and commissioning of PIPE WRAPPING COATING

ROLL TAPE For UNDER GROUND PIPE LINE _ 1MTR X 10MTR X 4MM THICK

ROLL_ CLEXOPIPE-PWT 4MM, (THIS ROLL IS LONG LASTING & PROVIDE HIGH

21 ANTICORROSIVE PROTECTION) PIPE WRAPPING COATING ROLL TAPE & FIRST 1.00 2000.00 Mtr.

APPLY SOLVENT BASED CLEXODAM-PRIME @ 0.3-0.4L/SQMT AS PER IS: 3384 -

1986. MAKE :- PIPEKOT/CLEXO Engg.

SR.NO. ITEM DESCRIPTION Rate PER

SPRINKLER - Supply, Installtion, Testing & Commissioing of Standard

Response Sprinkler, Pendent Brass Sprinkler, Quartzoid Bulb

22 type with crome finish, nickel crome platde, K factor K-80, 1.00 620.00 Nos.

Temp.- 68 Degree C, 1/2" end connection including resessed

escutcheon. (UL Listed).MAKE :- TYCO/ ULTRAFIRE/AAAG

Supplying, installing, testing and commissioning of G.I TIE ROTH FOR

SPRINKLER with complete accessories.

Supplying, installing, testing and commissioning of ANGLE SUPPORT / MS

SUPPORT with complete accessories and final setup.

FORGED BRASS AIR RELEASE VALVE (25 mm Dia) :-

PROVIDING AND FIXING OF FORGED BRASS AIR RELEASE VALVE

SCREWED END. (SUITABLE FOR WORKING PRESSURE OF 25KG/SQ.CM.)

MAKE:- ZOLOTO/SANT/DRP

Supplying, installing, testing and commissioning of FIRE AUTHORITY

APPROVED MAIN FIRE PUMP 40HP as per TAC _ Centrifugal type COUPLE

26 pump Capacity - 1620Lpm, Head - 90 Meter, RPM - 2900, CI -Casing, Bronze 1.00 225000.00 Set

– Impeller, SS AISI-Shaft, GLAND PACKING Make - Kirloskar KBL/Prima (9KG

Supplying, installing, testing and commissioning of FIRE AUTHORITY

APPROVED MAIN FIRE PUMP 30HP as per TAC _ Centrifugal type COUPLE

27 pump Capacity - 1050Lpm, Head - 80 Meter, RPM - 2900, CI -Casing, Bronze 1.00 200000.00 Set

– Impeller, SS AISI-Shaft, GLAND PACKING Make - Kirloskar KBL/Prima (8KG

Supplying, installing, testing and commissioning of FIRE AUTHORITY

APPROVED MAIN FIRE PUMP 20HP as per TAC _ Centrifugal type COUPLE

28 pump Capacity - 700Lpm, Head - 90 Meter, RPM - 2900, CI -Casing, Bronze 1.00 150000.00 Set

– Impeller, SS AISI-Shaft, GLAND PACKING Make - Kirloskar KBL/Prima (9KG

Supplying, installing, testing and commissioning of FIRE AUTHORITY

APPROVED MAIN FIRE PUMP 15HP as per TAC _ Centrifugal type COUPLE

29 pump Capacity - 600Lpm, Head - 90 Meter, RPM - 2900, CI -Casing, CI - 1.00 135000.00 Set

Impeller, SS AISI-Shaft, GLAND PACKING Make - Kirloskar KBL/Prima (9KG

Supplying, installing, testing and commissioning of FIRE AUTHORITY

APPROVED MAIN FIRE PUMP 10HP as per TAC _ Centrifugal type COUPLE

30 pump Capacity - 450Lpm, Head - 90 Meter, RPM - 2900, CI -Casing, CI 1.00 115000.00 Set

– Impeller, SS AISI-Shaft, GLAND PACKING Make - Kirloskar KBL/Prima (9KG

Supplying, installing, testing and commissioning of FIRE AUTHORITY

APPROVED JOCKEY FIRE PUMP 10HP as per TAC _ Centrifugal type pump

Capacity - 220Lpm, Head - 80 Meter, RPM - 2900, CI -Casing, CI - Impeller, SS

AISI-Shaft, GLAND PACKING Make - Kirloskar KBL/Prima, (8KG Pressure).

Supplying, installing, testing and commissioning of FIRE AUTHORITY

APPROVED VERTICAL JOCKEY FIRE PUMP 7.5HP as per TAC _ Type -

32 Centrifugal type pump Capacity - 180Lpm, Head - 70 Meter, RPM - 2880, CI - 1.00 105000.00 Set

Casing, CI – Impeller, SS-Shaft, GLAND PACKING Make - Kirloskar KBL/Prima,

SR.NO. ITEM DESCRIPTION Rate PER

Motorised Changeover switch with ATS controller :- for 50/62.5 KVA

Providing & erecting approved make ATS panel suitable for following size of

phase, 415 V., 50 cycles, A.C. diesel generating set complete of scope as

33 detailed below: 1) Power module: Motorised Changeover switch with ATS 1.00 56780.00 Nos.

controller, Auxiliary contactor with NO & NC contacts with Automatic Battery

Charger, indicating lamps for Generator ON, Mains ON, Load and suitable

control terminals and power terminals with neutral earthing studs. Make -

L&T / Havells/Schneider

Motorised Changeover switch with ATS controller :- for 75/82.5 KVA

Providing & erecting approved make ATS panel suitable for following size of

phase, 415 V., 50 cycles, A.C. diesel generating set complete of scope as

34 detailed below: 1) Power module: Motorised Changeover switch with ATS 1.00 62713.00 Nos.

controller, Auxiliary contactor with NO & NC contacts with Automatic Battery

Charger, indicating lamps for Generator ON, Mains ON, Load and suitable

control terminals and power terminals with neutral earthing studs. Make -

L&T / Havells/Schneider

Motorised Changeover switch with ATS controller :- for 100/ 125 KVA

Providing & erecting approved make ATS panel suitable for following size of

phase, 415 V., 50 cycles, A.C. diesel generating set complete of scope as

35 detailed below: 1) Power module: Motorised Changeover switch with ATS 1.00 72035.00 Nos.

controller, Auxiliary contactor with NO & NC contacts with Automatic Battery

Charger, indicating lamps for Generator ON, Mains ON, Load and suitable

control terminals and power terminals with neutral earthing studs. Make -

L&T / Havells/Schneider

Manual Change over switch:- 63A

Providing & erecting of Approved make Iron Clad or metal clad four pole

change over switch 415V. confirming to IS of following capacity 63A Make -

L&T / Havells/Schneider

Manual Change over switch:- 125A

Providing & erecting of Approved make Iron Clad or metal clad four pole

change over switch 415V. confirming to IS of following capacity 125A Make -

L&T / Havells/Schneider

Supplying, installing, testing and commissioning of FIRE AUTHORITY

APPROVED DG SET (DIESEL ENGINE PUMP) 25 BHP as per TAC _ DIESEL

ENGINE PUMP, Bronze LTB-2 – Impeller, 800LPM, 90MTR - HEAD, (9KG

PRESSURE), Pump MAKE - Kirloskar KBL/Prima , Engine make- Eicher/

mahindra _KFE SERIES, FUEL TANK 100LTR CAPACITY, BATTERY WITH CABLE &

LUGS, OIL & COLLANT, BATTERY CHARGER WITH ALL ACCESSORIES.

Supplying, installing, testing and commissioning of FIRE AUTHORITY

APPROVED DG SET (DIESEL ENGINE PUMP) 39 BHP as per TAC _ DIESEL

ENGINE PUMP, Bronze LTB-2 – Impeller, 1620LPM, 90MTR - HEAD, (9KG

PRESSURE), MAKE - Kirloskar KBL/Prima, Engine make- Eicher/ mahindra

_KFE SERIES, FUEL TANK 100LTR CAPACITY, BATTERY WITH CABLE & LUGS, OIL

& COLLANT, BATTERY CHARGER WITH ALL ACCESSORIES.

SR.NO. ITEM DESCRIPTION Rate PER

Supplying, installing, testing and commissioning of AUTOMATIC PRESSURE

CONTROL FIRE PANEL _Common auto control panel suitable for auto

operation of fire electrical pumps having STAR DELTA starter. WORKING :

MANUAL MODE: PUMP/START STOP USING START/STOP PUSS BOTTON,

AUTO MODE - PRESSURE BASE PUMP AUTO START / STOP (MAKE -

Pump capacity (Main + Jockey) - 40 HP + 10 HP (including connection to DG

Pump if required)

Supplying, installing, testing and commissioning of AUTOMATIC PRESSURE

CONTROL FIRE PANEL _Common auto control panel suitable for auto

operation of fire electrical pumps having STAR DELTA starter. WORKING :

MANUAL MODE: PUMP/START STOP USING START/STOP PUSS BOTTON,

AUTO MODE - PRESSURE BASE PUMP AUTO START / STOP (MAKE -

Pump capacity (Main + Jockey) - 30 HP + 10 HP (including connection to DG

Pump if required)

Supplying, installing, testing and commissioning of AUTOMATIC PRESSURE

CONTROL FIRE PANEL _Common auto control panel suitable for auto

operation of fire electrical pumps having STAR DELTA starter. WORKING :

MANUAL MODE: PUMP/START STOP USING START/STOP PUSS BOTTON,

AUTO MODE - PRESSURE BASE PUMP AUTO START / STOP (MAKE -

Pump capacity (Main + Jockey) - 20 HP + 7.5 HP (including connection to DG

Pump if required)

Supplying, installing, testing and commissioning of AUTOMATIC PRESSURE

CONTROL FIRE PANEL _Common auto control panel suitable for auto

operation of fire electrical pumps having STAR DELTA starter. WORKING :

MANUAL MODE: PUMP/START STOP USING START/STOP PUSS BOTTON,

AUTO MODE - PRESSURE BASE PUMP AUTO START / STOP (MAKE -

Pump capacity (Main + Jockey) - 15 HP + 7.5 HP (including connection to DG

Pump if required)

Supplying, installing, testing and commissioning of AUTOMATIC PRESSURE

CONTROL FIRE PANEL _Common auto control panel suitable for auto

operation of fire electrical pumps having STAR DELTA starter. WORKING :

MANUAL MODE: PUMP/START STOP USING START/STOP PUSS BOTTON,

AUTO MODE - PRESSURE BASE PUMP AUTO START / STOP (MAKE -

Pump capacity (Main + Jockey) - 10 HP + 7.5 HP (including connection to DG

Pump if required)

Supplying, installing, testing and commissioning of AUTOMATIC PRESSURE

CONTROL FIRE PANEL _Common auto control panel suitable for auto

operation of fire electrical pumps having STAR DELTA starter. WORKING :

45 MANUAL MODE: PUMP/START STOP USING START/STOP PUSS BOTTON, 1.00 17000.00 Nos.

AUTO MODE - PRESSURE BASE PUMP AUTO START / STOP (MAKE -

Pump capacity (Main Pump) - 15 HP

SR.NO. ITEM DESCRIPTION Rate PER

Supplying, installing, testing and commissioning of AUTOMATIC PRESSURE

CONTROL FIRE PANEL _Common auto control panel suitable for auto

operation of fire electrical pumps having STAR DELTA starter. WORKING :

46 MANUAL MODE: PUMP/START STOP USING START/STOP PUSS BOTTON, 1.00 13000.00 Nos.

AUTO MODE - PRESSURE BASE PUMP AUTO START / STOP (MAKE -

Pump capacity (Main Pump) - 10 HP

ELECTRICAL FRLS CABLE FOR PUMP HOUSE _Supplying, installing, testing and

commissioning of 4 core X 35 sqmm coper conductor FRLS insulated

armoured cable fixed as per specification. Approved make :

polycab/Finolax

ELECTRICAL FRLS CABLE FOR PUMP HOUSE _Supplying, installing, testing and

commissioning of 4 core X 16 sqmm coper conductor FRLS insulated

armoured cable fixed as per specification. Approved make :

polycab/Finolax

ELECTRICAL FRLS CABLE FOR PUMP HOUSE _Supplying, installing, testing and

49 commissioning of 4 core X 6 sqmm coper conductor FRLS insulated armoured 1.00 503.00 Mtr

cable fixed as per specification. Approved make : polycab/Finolax

ELECTRICAL FRLS CABLE FOR PUMP HOUSE _Supplying, installing, testing and

commissioning of 2 core X 1.5 sqmm coper conductor FRLS insulated

armoured cable fixed as per specification. Approved make :

polycab/Finolax

Perforated C type cable tray : - 50 X 50 X 1.6 mm Thick

Providing and fixing approved make Perforated C type cable tray. Made from

sheet steel. The cable tray should be single or double bended as per required

51 and as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS 1.00 302.00 Mtr

2629/4759. with max 17.5% perforation with coupler plate / Fish plate and GI

hardware like nut - bolt and washers etc. erection with necessary support(

included) as per Specification and as per instruction of engineer in charge..

Perforated C type cable tray : - 100 X 50 X 1.6 mm Thick

Providing and fixing approved make Perforated C type cable tray. Made from

sheet steel. The cable tray should be single or double bended as per required

52 and as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS 1.00 357.00 Mtr

2629/4759. with max 17.5% perforation with coupler plate / Fish plate and GI

hardware like nut - bolt and washers etc. erection with necessary support(

included) as per Specification and as per instruction of engineer in charge..

Perforated C type cable tray : - 150 X 50 X 1.6 mm Thick

Providing and fixing approved make Perforated C type cable tray. Made from

sheet steel. The cable tray should be single or double bended as per required

53 and as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS 1.00 420.00 Mtr

2629/4759. with max 17.5% perforation with coupler plate / Fish plate and GI

hardware like nut - bolt and washers etc. erection with necessary support(

included) as per Specification and as per instruction of engineer in charge..

ISI MARK Butterfly VALVE _ Supplying, installing, testing and commissioning of

valve with M.S. flange, C.I disc, Carbon steel shaft, handed lever operated PN

1.6 rating, Confirming to IS: 13095 / BS - 5155. including flanges, Nut & Bolt,

WASER & RUBBER GASKET ETC.COMPLETE AS REQUIRED. MAKE:- DRP /SANT/

SR.NO. ITEM DESCRIPTION Rate PER

ISI MARK Butterfly VALVE _ Supplying, installing, testing and commissioning of

valve with M.S. flange, C.I disc, Carbon steel shaft, handed lever operated PN

1.6 rating, Confirming to IS: 13095 / BS - 5155. including flanges, Nut & Bolt,

WASER & RUBBER GASKET ETC.COMPLETE AS REQUIRED. MAKE:- DRP /SANT/

ISI MARK Butterfly VALVE _ Supplying, installing, testing and commissioning of

valve with M.S. flange, C.I disc, Carbon steel shaft, handed lever operated PN

1.6 rating, Confirming to IS: 13095 / BS - 5155. including flanges, Nut & Bolt,

WASER & RUBBER GASKET ETC.COMPLETE AS REQUIRED. MAKE:- DRP /SANT/

ISI MARK Butterfly VALVE _ Supplying, installing, testing and commissioning of

valve with M.S. flange, C.I disc, Carbon steel shaft, handed lever operated PN

1.6 rating, Confirming to IS: 13095 / BS - 5155. including flanges, Nut & Bolt,

WASER & RUBBER GASKET ETC.COMPLETE AS REQUIRED. MAKE:- DRP /SANT/

ISI MARK Butterfly VALVE _ Supplying, installing, testing and commissioning of

valve with M.S. flange, C.I disc, Carbon steel shaft, handed lever operated PN

1.6 rating, Confirming to IS: 13095 / BS - 5155. including flanges, Nut & Bolt,

WASER & RUBBER GASKET ETC.COMPLETE AS REQUIRED. MAKE:- DRP /SANT/

ISI MARK Butterfly VALVE _ Supplying, installing, testing and commissioning of

valve with M.S. flange, C.I disc, Carbon steel shaft, handed lever operated PN

1.6 rating, Confirming to IS: 13095 / BS - 5155. including flanges, Nut & Bolt,

WASER & RUBBER GASKET ETC.COMPLETE AS REQUIRED. MAKE:- DRP /SANT/

C.I. DUAL PLATE NON-RETURN VALVE :-

Supplying, installing, testing and commissioning of C.I. DUAL PLATE NON-

RETURN VALVE with matching flanges to ASA 10lbs rating with Accessories as

60 per specification and as per IS 5312 PN 1.6. including flanges, Nut & Bolt, 1.00 9500.00 Nos.

WASER & RUBBER GASKET ETC.COMPLETE AS REQUIRED. MAKE:- DRP /SANT/

C.I. DUAL PLATE NON-RETURN VALVE :-

Supplying, installing, testing and commissioning of C.I. DUAL PLATE NON-

RETURN VALVE with matching flanges to ASA 10lbs rating with Accessories as

61 per specification and as per IS 5312 PN 1.6. including flanges, Nut & Bolt, 1.00 9000.00 Nos.

WASER & RUBBER GASKET ETC.COMPLETE AS REQUIRED. MAKE:- DRP /SANT/

C.I. DUAL PLATE NON-RETURN VALVE :-

Supplying, installing, testing and commissioning of C.I. DUAL PLATE NON-

RETURN VALVE with matching flanges to ASA 10lbs rating with Accessories as

62 per specification and as per IS 5312 PN 1.6. including flanges, Nut & Bolt, 1.00 7493.00 Nos.

WASER & RUBBER GASKET ETC.COMPLETE AS REQUIRED. MAKE:- DRP /SANT/

SR.NO. ITEM DESCRIPTION Rate PER

C.I. DUAL PLATE NON-RETURN VALVE :-

Supplying, installing, testing and commissioning of C.I. DUAL PLATE NON-

RETURN VALVE with matching flanges to ASA 10lbs rating with Accessories as

63 per specification and as per IS 5312 PN 1.6. including flanges, Nut & Bolt, 1.00 5533.00 Nos.

WASER & RUBBER GASKET ETC.COMPLETE AS REQUIRED. MAKE:- DRP /SANT/

C.I. DUAL PLATE NON-RETURN VALVE :-

Supplying, installing, testing and commissioning of C.I. DUAL PLATE NON-

RETURN VALVE with matching flanges to ASA 10lbs rating with Accessories as

64 per specification and as per IS 5312 PN 1.6. including flanges, Nut & Bolt, 1.00 5476.00 Nos.

WASER & RUBBER GASKET ETC.COMPLETE AS REQUIRED. MAKE:- DRP /SANT/

C.I. DUAL PLATE NON-RETURN VALVE :-

Supplying, installing, testing and commissioning of C.I. DUAL PLATE NON-

RETURN VALVE with matching flanges to ASA 10lbs rating with Accessories as

65 per specification and as per IS 5312 PN 1.6. including flanges, Nut & Bolt, 1.00 5200.00 Nos.

WASER & RUBBER GASKET ETC.COMPLETE AS REQUIRED. MAKE:- DRP /SANT/

Supplying, installing, testing and commissioning of Y TYPE C.I STAINER +

MATERIALS REQUIRED FOR SUCTION DELIVERY PIPING & FITTINGS + STAINER_

Y type strainers cast iron flanges as required (used in suction pipe between

pump and Tank )including flanges, Nut & Bolt, WASER & RUBBER GASKET

ETC.COMPLETE AS REQUIRED. MAKE:- DRP /SANT/ ZOLOTO

Supplying, installing, testing and commissioning of Y TYPE C.I STAINER +

MATERIALS REQUIRED FOR SUCTION DELIVERY PIPING & FITTINGS + STAINER_

Y type strainers cast iron flanges as required (used in suction pipe between

pump and Tank )including flanges, Nut & Bolt, WASER & RUBBER GASKET

ETC.COMPLETE AS REQUIRED. MAKE:- DRP /SANT/ ZOLOTO

Supplying, installing, testing and commissioning of Y TYPE C.I STAINER +

MATERIALS REQUIRED FOR SUCTION DELIVERY PIPING & FITTINGS + STAINER_

Y type strainers cast iron flanges as required (used in suction pipe between

pump and Tank )including flanges, Nut & Bolt, WASER & RUBBER GASKET

ETC.COMPLETE AS REQUIRED. MAKE:- DRP /SANT/ ZOLOTO

Supplying, installing, testing and commissioning of Y TYPE C.I STAINER +

MATERIALS REQUIRED FOR SUCTION DELIVERY PIPING & FITTINGS + STAINER_

Y type strainers cast iron flanges as required (used in suction pipe between

pump and Tank )including flanges, Nut & Bolt, WASER & RUBBER GASKET

ETC.COMPLETE AS REQUIRED. MAKE:- DRP /SANT/ ZOLOTO

SR.NO. ITEM DESCRIPTION Rate PER

PRESSURE GAUGE WITH BALL VALVE AND SYPHON TUBE _Supplying,

installing, testing and commissioning of pressure gauge (0-15 Kg/Cm2)(OIL

FILL) with necessary threaded and fittiings such as tees, elbows and painting

and supports etc. compelete MAKE:- H GURU/ARBUDA

PRESSURE SWITCHES _ Supplying, installing, testing and commissioning of

71 pressure switches with necessary threaded and fittiings along with high and 1.00 3590.00 Nos.

drop pressure setting as per noms. MAKE:- DANFOSS/INDFOSS/ HONEYWELL

BRASS BALL VALVE WITH HANDLE 25 mm :- PROVIDING, FIXING, TESTING AND

72 COMMISSIONING of ball valve with handle as per IS: 778 with matching BSP 1.00 800.00 Nos.

threaded in to inlet - MAKE - SANT/ZOLOTO/DRP

PAINTING _ Supply and application of single coat of yellow primer and two

coat of signal fire red paint ASIAN PAINT as per IS:5 (will charge actual as per

73 running meter quantity of pipeline painting). (This is extra item of ONLY 1.00 720.00 Ltr

Painting wherever required. This is not applicable for pipe items as the

painting of pipe is included with pipe item rate)

Supply, Installation and commissioning of FIRE ALARM PANEL Conventional

74 type (6 Zone) with complete accessories. 1.00 18200.00 Nos.

MAKE:-RAVEL/ASES

Supply, Installation and commissioning of FIRE ALARM PANEL Conventional

type (4 Zone) with complete accessories. MAKE:-RAVEL/ASES

Supply, Installation and commissioning of FIRE ALARM PANEL Conventional

type (2 Zone) with complete accessories. MAKE:-RAVEL/ASES

77 Batteries 12V, 7.2/7.5AH MAKE:- EXIDE / AMRON 1.00 1500.00 Nos.

Smoke detector Conventional type :-

78 Supply, Installation and commissioning of smoke detectors, with complete 1.00 1200.00 Nos.

accessories. MAKE:-RAVEL/APPOLO/HONEYWELL

MCP Conventional type :-

79 Supply, Installation and commissioning of Manual Call Points, 1.00 800.00 Nos.

with complete accessories. - MAKE:-RAVEL/ASES

HOOTER Conventional type -

80 Supply, Installation and commissioning of hooter, with 1.00 1100.00 Nos.

complete accessories MAKE:-RAVEL/ASES

FIRE ALARM PANEL :- Supply, Installation and commissioning of 2 LOOP

81 ADDRESSABLE TYPE FIRE ALARM PANEL WITH BATTERY BACKUP. with 1.00 113275.00 Nos.

complete accessories (MAKE:- MORLEY BY HONEYWELL / APPOLO)

FIRE ALARM PANEL :- Supply, Installation and commissioning of 4 LOOP

82 ADDRESSABLE TYPE FIRE ALARM PANEL WITH BATTERY BACKUP, with 1.00 130000.00 Nos.

complete accessories (MAKE:- MORLEY BY HONEYWELL / APPOLO)

FIRE ALARM PANEL :- Supply, Installation and commissioning of 6 LOOP

83 ADDRESSABLE TYPE FIRE ALARM PANEL WITH BATTERY BACKUP, with 1.00 150000.00 Nos.

complete accessories (MAKE:- MORLEY BY HONEYWELL / APPOLO)

Supply, Installation and commissioning of ADDRESSABLE TYPE SMOKE

84 DETECTOR WITH BASE, with complete accessories 1.00 2322.00 Nos.

(MAKE:- MORLEY BY HONEYWELL / APPOLO)

FAULT ISOLATOR :-

Supply, Installation and commissioning of ADDRESSABLE TYPE FAULT

ISOLATOR WITH BASE, with complete accessories

(MAKE:- MORLEY BY HONEYWELL / APPOLO)

SR.NO. ITEM DESCRIPTION Rate PER

Supply, Installation and commissioning of ADDRESSABLE TYPE SOUNDER

86 STROBE / HOOTER WITH BASE, with complete accessories 1.00 7979.00 Nos.

(MAKE:- MORLEY BY HONEYWELL / APPOLO)

Supply, Installation and commissioning of Armurd FRLS cable 2 core 1.5 sqmm

with complete accessories - (MAKE - POLYCAB/FINOLEX)

Supply, Installation and commissioning of Flexible FRLS cable 2 core 1.5 sqmm

with complete accessories - (MAKE - POLYCAB/FINOLEX)

Supplying and installation of ISI marked Co2_4.5kg Fire extinguisher

PESO CERTIFIED MAKE:- KANEX/SAFEX/ULTRAFIRE

Supplying and installation of ISI marked ABC 6kg Fire extinguisher - 50% MAP

MAKE:- KANEX/SAFEX/ULTRAFIRE

NIGHT GLOVE SIGNAGES (UV Digital) PRINTED ON 5MM PVC FOAM SHEET

91 (FIRE EXTINGUISHER, FIRE HOSE REEL, EMERGENCY EXIT, FIRE PUMP HOUSE, 1.00 9.25 SQ.INCH

FIRE PUMP PANEL, MANUAL CALL POINT, HOOTER, FIRE ALARM PANEL,

ASSEMBLY POINT etc.)

Fire Water Tank :-

Providing erecting and fixing 3 Layer PVC water tank of required capacity for

fire fighting system. Complete the item with all fittings, Connections & Base.

Complete as per instruction of Engineer In-Charge

Providing and constructing RCC Water Tank / Sump of required capacity as per

requirement for fire fighting system. Complete the item as per Architect

93 approved drawing with all neccesory fittings, Connections, Chemical water 1.00 9.50 Lit

proofing of Dr. fixit, C.I. air vent pipe with cowl vent etc. Complete as per

instruction of Engineer In-Charge