Tender no. 38/EDC(s)/2022-23

Amount

ST POLE SP-23 (Bottom Portion Hot Dip Galvanized)

MS Channel 100 X 50 mm

M.S Angle 65X65X6 mm

11 KV Pin Insulators poly.Type with Pin

11 KV Disc Insulators poly.Type

11 KV Disc Fitting B&S 45 KN

11 KV X-Arm V-type

Stay set 16x1800mm

Stay wire 7/10 SWG

ACSR Weasel Conductor

Earth wire G.I 7/16 SWG

11 KV G/O switch

G.I Wire 6 SWG for road crossing & earthing

Earthing Road 20x2500 mm

Electronic Static TVM 11 KV RS 232 Port

Cable AL 3x120 Sq.mm XLPE 11 KV

11 KV Pilfer Resistant Metering Cubical

Jointing Kit For 3x120 sq.mm 11 KV XLPE Cable(I/D)

Jointing Kit For 3x120 sq.mm 11 KV XLPE Cable(O/D)

E/Wire Clamps for ST Poles SP- 23 with N&B

PP Clamps for ST Poles SP- 23 with N&B

Bracing Holding Clamp ST Pole SP-23 with N&B (TOP)

Bracing Holding Clamp ST Pole SP-23 with N&B (Bottom)

Stay Clamps for ST Poles SP- 23 with N&B

Stay Insulator

Labour

Excavation of earth for pole pit of size 0.9x0.6x1/6 of full length of pole for erection of pole in all type of soil including proper dressing of sides and ramming of bottom including getting out the excavated soil and disposal of surplus excavated soil as directed complete work.(250 cum)

Erection of following single support pole in proper level and alignment alongwith fixing of all accessories like top channel & clamps as per RESSPO construction manual.

Erection of following Double support pole in proper level and alignment alongwith fixing of all accessories like top channel & clamps as per RESSPO construction manual.

Muffing of poles size 0.45 cmx0.60 cm radious with cc 1:3:6 (1 cement :3 coarse sand : 6 grade stone 10 mm nominal size) block 45 cm height from ground level including cost of cement,stone and sand etc.

Grouting of pole in size 0.45x0.45x1/9 of the support in CC ratio 1:4:8 (1 cement : 4 graded stone 20 mm nominal size : 8 coarse sand ) block including cost of cement sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment leveling as per RESSPO construction manual.(4800 Cum)

Excavation of earth for stay pit of size 0.6x0.6x1.2 mtr in all type of soil including proper dressing of sides and ramming of bottom including getting out the excavated soil and disposal of surplus excavated soil as directed complete work.

Fixing tightening and nozzaling of stay with pole and stay rod on required tension as per drawing/RESSPO manual.

11 KV Stay

Grouting of stay in size 0.6x0.6x0.3 in ratio 1:4:8 (1 cement : 4 graded stone 20 mm nominal size : 8 coarse sand ) block including cost of cement sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment leveling as per RESSPO construction manual.(4800 Cum)

Earthing of Support as per norms and site requirement with MS Earth rod of 2500 mm longincluding excavation of of pits and digging of MS Rod to proper depth and connecting the earth electrode ith help of GI Wire to pole bottom.

Mounting & Fixing of Fuse Set on Double Pole Structor including Making of connection complete work.

Construction of Metering Room for metering Cubical at S/S end including cost of building/material and it also including the cost of gate etc. Of 10 feet height.

Installation of 11 KV Metering cubical in the metering room with grouting and making of all connection.

Route Cleareance by cutting of tree branches,loping and chopping of trees for 11 KV line.

Fabrication of M.S channel,angle with cutting driling holes as per requred size

Laying, spreading, stringing and sagging 3 phase 4 wire 11KV line with ACSR Weasel conductor with binding and jumpering complete

Guaurding of line over(Telephone/Road/LT line/River) crossing as per drawing including fixing of gaurding channel/angle as per RESPO manual 11KV

Laying and 11KV cable in half circle hume pipe of dia 150 sqmm including cost of hume pipe in depth 1.5 mtr.

Mounting and fixing of TPMO on the double pole structure making of connections complete in all respect

Making of T-off

Jointing and fixing of cable jointing kit 11KV XLPE cable indoor/Outdoor cable boxes

BIJENDRA KUMAR POKHRIYAL

UTTARANCHAL FORGINGS INDUSTRY