WBMAD/ULB/RM/NIT- 22e/25-26/SL38

Earthwork in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75m as directed...................................complete. a) Depth of excn. not exceeding 1500 mm.

Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powdered earth or local sand.

Cement concrete with graded stone ballast (40 mm size) excluding shuttering. In ground floor. (A) Pakur Variety. (a) 1:3:6 proportion.

Brick work with 1st class bricks in cement mortar (1:4) (a) In foundation and plinth

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints.....(Ground floor).[Excluding cost of chipping over concrete surface] (ii) With 1:4 cement mortar. (b) 15mm th. plaster

Neat cement punning about 1.5 mm thick in wall, dado, window sill, floor etc.

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing....... (f) 25 mm to 30 mm shuttering without staging in foundation.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups binders etc including supply of rods, initial straightening.......... (a) for works in foundation, basement and upto roof of ground floor / upto 4m. (i) Tor steel/Mild steel . II. JSW /JSPL / SHYAM / SRMB / BMASL / ELECTROSTEEL / SSL.

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes…… i) Pakur Variety

M.S. structural works in columns, beams, etc.with single rolled structural members (e.g. joists, angle, channel sections conforming to IS : 226, IS : 808 & SP(6)-1964 connected to one another with bracket, gussets, cleats as per design, direction of E.I.C. complete including cutting to requisite shape and length...... i) For structural members of specified section weighing less than 22.5 Kg/m

Holding down bolt with nut including 100 m x 100m x 6 mm plate washer at bottom fitted complete and packing the hole with cement concrete or cement grout as directed. (ii) 20 mm dia bolt. (b) 450 mm long.

Suppling fitting & fixing granite tiles 10 mm to 12 mm thick in columns, wall, facia etc.with 15 mm thick (avg) cement morter (1:2) including making suitable arrengements to hold the stones properly by brass/copper hooks …… Area of each tiles upto 0.2 Sq.m.

Suppling, Fitting and fixing Stainless Steel raling consist of 38 mm dia and 900 mm height vertical balustrade at every two alternative steps, 50 mm dia top rail 3 (three) nos 19 mm dia horizontal Stainless Steel pipe and base cover plate……….. Weight of Stainless Steel railing per meter 6.5 kg.(approx)

Sub Total

Please Enable Macros to View BoQ information