REPAIR / PAINTING OF STEEL FURNITURE ARTICLES AT RAIWALA MIL STN UNDER AGE(I) RAIWALA.

Amount

Repair to Almirah large steel with shelves (FD-1031)

Removing unserviceable locks from Almirah large steel , supply and fixing new locks to the existing. Make : Harrison/Godrej

Removing unserviceable handles supply and fixing with suitable nut, new chromium plated steel handle

Fixing loose shelves of Almirah with suitable nuts and bolts

Removing unserviceable legs of Almirah supply and fixing new legs minimum thickness of 1 mm & as per drg.

Repair to Almirah med steel with shelves (FD-1032)

Removing unserviceable locks from Almirah med steel , supply and fixing new locks to suit/replace lock of Make : Harrison/Godrej

Removing unserviceable handles supply and fixing with suitable nut, new chromium plated steel handle

Fixing loose shelves of Almirah with suitable nuts and bolts

Removing unserviceable legs of Almirah supply and fixing new legs as per drg

Repair to Chair steel tubular with out Arms (FD-75 (M))

Removing of unserviceable seat and back of chair steel tubular without Arms, Supply and fixing on new seat and back with suitable machine screws.

Seat for chair duly canned

Back for chair duly canned

Rubber shoes for chair with screw

Repair to Chair steel tubular with Arms (FD-75 (M))

Removing of unserviceable seat and back and arms of chair steel tubular with arms, supply and fixing new seats, backs and arms with suitable screws.

Seat for chair duly canned

Back for chair duly canned

Hard wood Shisham Arms for chair

Rubber shoes for chair with screw

Repair to Table Office Officer steel (FD-84 (M),FD-306 and FD 1003

Removing unserviceable parts of Table office officer steel, supply and fixing of the following parts to table all as shown on drg and as directed.

Top of Table table office Officer Steel shall be made out of 18/19 mm thick, prelaminated particle board bounded with phenol formal dehyde one side teak face other side white in colour including 4 mm thick 1st class hard wood (teak) beading around the sutter all as shown in drawing and as directed by Engineer-in-Charge.

M&L in repair/replacement of drawer table office officer in right side, 1mm thick mild steel sheet as per existing pattern having locking device all as shown in drawing and as directed by Enigneer-in-Charge.

M&L in replacement legs of table office officer,25mm mild steel square tube 1.6mm thick welded with electric welding machine to match with bottom frame all as shown in drawing and as directed by Enigneer-in-Charge.

M&L in replacement bottom stiffener of table office officer, steel 25mm mild steel square pipe 1.6mm thick welded with electric welding to match with bottom frame all as shown in drawing and as directed by Enigneer-in-Charge.

Removing of unserviceable locks of drawer fixing new locks with duplicate keys

Make : Godraj/Harrison

Repair to Table office clerk steel (FD-84 (M))

Removing unserviceable parts of Table office clerk steel, supply and fixing of the following parts to table all as shown on drg and as directed.

Top of Table table office Clerck Steel shall be made out of 18/19 mm thick, prelaminated particle board bounded with phenol formal dehyde one side teak face other side white in colour including 4 mm thick 1st class hard wood (teak) beading around the sutter all as shown in drawing and as directed by Engineer-in-Charge.

M&L in repair/replacement of drawer table office clerck steel in right side, 1mm thick mild steel sheet as per existing pattern having locking device all as shown in drawing and as directed by Enigneer-in-Charge.

M&L in replacement legs of table office officer,25mm mild steel square tube 1.6mm thick welded with electric welding machine to match with bottom frame all as shown in drawing and as directed by Enigneer-in-Charge.

M&L in replacement bottom stiffener of table office officer, steel 25mm mild steel square pipe 1.6mm thick welded with electric welding to match with bottom frame all as shown in drawing and as directed by Enigneer-in-Charge.

Removing of unserviceable locks of drawer fixing new locks with duplicate keys

Make : Harrisson

Repair to Locker Bed Side Steel (FD-1029)

Removing of old unserviceable handles from Bed side locker steel supply and fixing new chromium plated steel handle 100mm long as specified and directed.

Removing of old unserviceable safety type hasp and staple from bed side locker steel, Supply and fixing new chromium plated hasp and staple (75x60x3mm) as specified and directed.

Fixing loose shelves of locker bed side steel

Taking out old unseviceable doors of locker bed side steel and S and F of new door size as per drawing and thickness not less than 1 mm thick

Removing unserviceable legs of Locker bed side steel and supply and fixing of new legs as per drg, thickness of sheet shall be minimum 1 mm thick

Repair to Charpoy GI Pipe with ply wood top (FD-220)

Removing unserviceable long rails from charpoy GI Pipe, supply and fixing new GI long rail as per IS-1239 med grade 32 mm bore duly threaded as shown in drg.

M&L Removing unsv ply wood and replacing with new 12mm plywood top of size 1980x900 mm gde BWR type ISI marked fixed with 13 MS bolt 6mm dia including washer and nuts as directed by Engr-in-Charge

Supply and fixing of two nos ms flat strips 25 mm width 5 mm thick and 905 mm long on equal dividation on the gi charpoy for strengthening and holding of 12 mm ply and make holes on both ends to fit 5mm thick counter sunck machine screw 75mm long alongwith washers and nuts.

GI long rail obtained vide item 8 (a) shall be converted into short rail and fixing duly threaded as shown on drawing in replace on unserviceable short rails.

GI short rails obtained vide item No 8 (c) above shall be converted into leg and fix in place of unserviceable legs duly threaded in charpoy GI

Removing unserviceable GI elbow from charpoy GI, supply and fixing new GI elbow three way ISI mark (med grade) 32 mm

Removing unserviceable GI check nut, supply and fixing of new GI check nut 32 mm dia (medium grade)

Teapoy verandah (FD-208 & 255)

M&L in replacement 900x450x18/19mm thick prelaminated particle board, Teapoy Verandah Top, phenol formal dehyde bonded, one side teak wood finish and other side white in colour lamination duly 4mm thick TW beading duly polished around the top fixed with 30/35mm long MS wooden screw on frame including preparing the steel surfaces and applying one coat of synthetic enamel paint on the frame complete all as shown in drawing and as directed by Engineer-in-Charge.

M&L in replacement of legs 20mm dia of mild steel conduit pipe 1.6mm thickness made to "U" shape with 25mm x 3mm flat iron frame wilded to conduit pipe, all as shown in drg or as directed by Engr-in-Charge.

S & F MS tube not lessthan 1 mm thicness

Make : Harrisson

Gas / Electric semless welding

Gas / Electric seamlesse welding 6 mm thick to various steel furniture members and components where required including grinding filling the welding surface to match the existing surface complete.

Painting to steel furniture

Material and labor for painting on old steel surface of following furniture articles after removing of dents of steel surface. Putty shall be applied in dented surfaces directed by Engr-in-Charge to make surface flesh with existing surface. Putty shall be of good quality as approved by the GE.

Painting shall be done with one coat of OG/Black/white paint (spray painting) both inside and outside of all furniture articles as per the direction of Engineer-In-charge before commencement of painting work preparation of surface shall be got approved from the Engr-in-Charge then apply the coat of painting on whole surface shall be applied on dental surface and additional one coat of paint shall be provided on the same surface:-

Almirah steel large with shelves (FD-1031)

Almirah steel med with shelves (FD-1032)

Chair tubular steel with arms (FD-75(M))

Chair tubular steel withour arms (FD-75(M))

Table office offrs steel (FD-1003)

Table office clk steel (FD-1004)

Locker bed side steel (FD-1029)

Teapoy verandha (FD-383)

TARUN ENGINEERING WORKS