PERIODICAL SERVICES TO CERTAIN BUILDINGS, JOINERY, SANITORY FITTING, FLOORING, PLASTERING, REPAIRS TO ROOF AND CERTAIN ROOFING WORKS TO POCKET A, B AND 42 WEU UNDER GE AF TRIVANDRUM

Amount

M & L for preparing old plastered surfaces of wall by brooming down or by steel wire brushing and applying one coat of white wash complete all as specified and directed.

M & L for preparing old plastered surfaces of ceilings and applying one coat of white wash complete all as specified and directed.

M & L for preparing old plastered surfaces of wall and applying one coat of oil emulsion distemper complete all as specified and directed.

M & L for preparing old plastered surfaces of wall and applying two coat of oil emulsion distemper complete all as specified and directed.

M & L for preparing old treated surfaces of ceiling and applying one coat of oil emulsion distemper complete all as specified and directed.

M&L for one coat of exterior emulsion weather coat paint over the old wall surfaces including preparation of surfaces

M&L for one coat of exterior emulsion weather coat terracotta paint over wall or floor/MP tiles surfaces including preparation complete all as specified and directed.

M&L for preparation of old wooden painted surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint

M&L for preparation of old painted steel surfaces of any description over 10 cm and applying one coat of synthetic enamel paint

M&L for preparation of weathered surface of wall including complete removal of fungus and existing treatment and applying two coats OF weather coat paint over a coat of alkali resistant primer on existing surfaces including cleaning , washing etc all as specified.

M&L for one coat of plastic emulsion paint on old wall surfaces of any description including preparation, over 10 cm width or girth not otherwise described complete all as specified and directed

M & L preparation of treated surfaces of wall and applying one coat of cement base paint on walls all as specified and directed.

M&L for removing weed growth including complete removal of penetrated root parts and applying standard anti weed solution as per manufacturer instruction any position upto and including four storied building wall roof etc all as specified

M & L writing letters or figures ( Block Roman, Italic or Indian) n exc 30 cm high

M & L Obliterating old writing of any description n exc 0.1 Sqm with paint to match existing work

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M & L for vitrified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L for Vitrified Ceramic tiles light shade 8-10mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm and not exc 1.00 sqm in floors, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L 15mm thick Screed bed or bedding layer in cement mortar 1:4 for laying floor finishes

M&L for 20mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L PCC 1:2:4 type B0 (12.5mm graded aggregate) 25mm thick as in floor sub base for receiving of floor tiles complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed

M&L for rendering 10mm thick on fair faces of brick work in CM 1:4 as backing coat to receive tiles complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry for ashlar facings, dressed stonework, precast concrete articles and precast concrete block walling, built in cement or cement lime mortar including all quoins, arches, pillars, etc complete all as specified and directed.

M&L for providing precast cement concrete block (PCC 1:3:6 Type C-1) masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed.

M&L for providing precast cement concrete solid building blocks (PCC 1:3:6 Type C-1), or slabs 10cm thick (with plain or interlocking joints as directed) setting in cement mortar 1:6, complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L for Rendering 15mm thick on fair faces of block masonry work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new wall surfaces and finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: new work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) required shade and colour complete all as specified and directed.

M&L for preparation of new wall surfaces and applying plaster of Paris putty of 1 mm thickness over plastered surface and applying two or more coats of 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer over a coat of primer, of required shade and colour complete all as specified and directed.

M&L for preparation of new treated ceiling surface and applying plaster of Paris putty of 1 mm thickness over plastered surface and applying two or more coats of 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer over a coat of primer, of required shade and colour complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

S&F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement etc, complete all as specified and directed.

M&L preparation of new steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome complete all as specified and directed.

Taking down cement plaster including existing roof treatment and wall surfaces complete, racking out joints, hacking for key scrubbing down with water etc and removing rubbish to a distance exc 250m and not exc 500m all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on fair surfaces of brick masonry or concrete surface, finished the surface even and smooth with using extra cement incl using WPC as per manufacturers instructions, complete all as specified and directed. Note : WPC shall be measured and paid separately as supply only under relevant item of this schedule.

Supply only liquid waterproofing compound (ISI grade only)

M&L for cleaning the surface and applying FOSROC Nitoproof 725(minimum 0.8mm dft) over a priming coat of Nitoproof WB primer or equivalent product of Asian Paints, and apply Polyurethane water proofing coating on prepared concrete surface of roof slab & upto 300 mm of parapets and crumple joints including junction of roof and parapet wall, complete all as specified and directed by Engineer -in-Charge.

Dismantling single layer mangalore pattern or similar tiles in roofing incl ridge tiles complete all as specified and directed.

M&L for cement mortar fillets of 40 mm wide and 20 mm thick for laying mangalore pattern tile on roof, in cement mortar 1:4, complete all as specified and directed.

M&L for Roof tiles Mangalore pattern interlocking at side joints, laid dry, complete all as specified and directed.

All as per item No 50 above but except tiles

M&L Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and pointed in cement mortar 1:6.

All as per item No: 52 above but except tiles

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/ slabs/blankets, any thickness, including any type frame work and cover fillets etc, complete all as specified and directed

M&L for providing and fixing 10mm thick plaster of Paris ceiling (Gypsum anhydrous) to flat surface over GI frame work seamless perimeter 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having knurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and including hangers 6m dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified

Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each, resecuring or easing and refixing in the same opening complete all as specified and directed.

Taking down Chowkhats or frames not exc. 1.5 sq. m each (without taking off shutters from the frames)

Taking down Chowkhats or frames exc. 1.5 sq. m and n exc 4.0 sqm each (without taking off shutters from the frames)

Taking down shutters of any description not exceeding 1 Sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm and n exc 2.0 sqm each complete all as specified and directed.

Taking down aluminium shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each, and refixing after resecuring, making good and replacing hinges, pivot etc as required in the same opening complete all as specified and directed.

Taking down aluminium frames of doors/windows/sliding windows/ ventilators not exc 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed.

Taking down aluminium frames of doors/windows/sliding windows/ ventilators exc 1.5 Sqm & not exc 4.0 Sqm each (without taking off shutters from the frames) complete all as specified and directed.

Taking down aluminium shutters of any description not exceeding 1 Sqm each complete all as specified and directed.

Taking down aluminium shutters of any description exceeding 1 Sqm and n exc 2.0 sqm each complete all as specified and directed.

S& F powder coated anodised aluminium frame for doors, windows, ventilators/ partitions with one rebates including joint cleat for fixing etc complete all as specified .

S& F powder coated anodised aluminium window and ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, complete all as specified .

S& F powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, complete all as specified. Note : Hinges shall be friction stay type.

S& F powder coated sliding window with three track shutters including (two glass and one wiremesh) powder coated anodised aluminium frame work and glazing clips of Jindal sections No. 20671 weight of section is 0.699kg/RM or equivalent, complete all as specified .

S & F powder coated aluminum door shutters, aluminum sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, hanles, hinges anodised aluminium snap beading screws etc complete all as specified and directed.

Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge.

Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-inCharge. (Rate inclusive of frosred Glass pane or PVC sheet which is required). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. ((Rate inclusive of Glass pane). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F 2nd class hardwood plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned joints including repairs to distrubed existing surfaces complete all as specified and directed.

S&F mild steel bands, straps, hooks and pintle hinges large hasps and staples chins, clamps, pulins etc confirming Fe 290 Gde -E-165 complete all as specified and directed.

S & F second class hardwood plain, framed, panelled shutters of 40mm thick (any number of panels), with panels of timber flat on both sides (feather edges) or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and directed.

S & F second class hardwood glazed and skeleton shutters, 35 mm thick, open rebated and prepared to receive glass, gauze, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; fitted to chowkats complete all as specified and directed.

S&F 30 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc(without sash bars) edges of framing plain, chamferesd or rounded, fitted with cut and mitred beads for securing wiremesh etc. are provided with stiles and rails as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and directed

S & F 40mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

S&F mild steel work as framed work such as grills, gratings, etc.with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S & F butt hinges medium weight cold rolled mild steel 100 mm long complete all as specified and directed.

S & F butt hinges medium weight cold rolled mild steel 75 mm long complete all as specified and directed.

S & F 200 mm long aluminium, anodised, barrel tower bolts of extruded section, ISI marked, complete all as specified and directed.

S & F 150 mm long extruded aluminium alloy handles, fabricated type, anodized, ISI marked complete all as specified and directed .

S & F aluminium alloy anodised sliding door bolt with hasp and staple (bolt type), 250 mm long, and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alluminum alloy complete all as specified and directed.

S & F in repairs aluminium alloy anodised sliding door bolt with hasp and staple (bolt type), 250 mm long, and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alluminum alloy complete all as specified and directed.

S & F 100 mm long aluminium, anodised, barrel tower bolts of extruded section, ISI marked, complete all as specified and directed.

S & F 100 mm long extruded aluminium alloy handles, fabricated type, anodised, ISI marked complete all as specified and directed.

M & L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed.

S & F in repair alumimum extruded section body door closer hydraulically regulated, designation No 2, universal type, suitable for door shutters of 801 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

S & F in repairs double action floor spring hydraulically regulated, made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty suitable for aluminium doors openable in two directions complete all as specified and directed.

S&F in repairs aluminium body door closer, hydraulically regulated, desingation No 2, universal type, suitable for door shutter of 701 to 850mm in width and of weight between 36 to 60 Kg complete all as specified and directed.

S&F 25mm dia decorative curtain rods powder coated MS of approved pattern / colour / design of including decorative end fittings , brackets etc. fixed in repairs.

S&F in repairs 5mm thick glass mirror with double coat for protection and longevity, grounded edges for safety and silver plating on the back for better reflection of size 700x500mm, complete all as specified and directed.

S&F in repair floor door stopper of anodised aluminium alloy body and tongue, with hard drawn steel pring, end fitted with rubber bush (folding type), 140mm overall length of cover plate complete all as specified and directed.

S & F stainless steel of 0.36 mm nominal dia of wire and average width of aperature 1.4 mm, fixed with aluminum wire staples complete all as specified and directed.

S&F in repairs magnetic door stopper for cupboard, complete all as specified and directed.

S&F in repairs aluminium anodized barrel tower bolt of extruded section and size 150 mm long complete all as specified and directed.

S & F in repairs 200 mm long aluminium, anodised, barrel tower bolts of extruded section, ISI marked, complete all as specified and directed.

S&F in repairs extruded aluminium alloy handles, fabricated type, anodised of size 150 mm long complete all as specified and directed.

S & F in repairs 100 mm long extruded aluminium alloy handles, fabricated type, anodised, ISI marked complete all as specified and directed.

S&F in repairs aluminium weather strip with Nylon brush insert suitable for bottom of door shutters of wooden/aluminum all as specified and directed.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with aluminium wire staples complete all as specified and directed.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F 100 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F plain sheet glass 3 mm thick ordinary quality and glazing with oil putty/beading etc n.exc 0.50 Sqm each all as specified including removal of old broken glass

S&F figured glass 3 mm thick pin head type and glazing with oil putty/beading in squares or any size shape and size fixed to at any sections complete all as specified and directed.

S&F plain sheet glass 4 mm thick ordinary quality and glazing with oil putty/beading etc n.exc 0.50 Sqm each all as specified including removal of old broken glass

S & F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square in exc 0.5 sq.m in each pane Extra over sheet glass, ordinary quality,if sheet glass is ground or obscured orfrosted, on one side

S&F plain sheet glass 4.8 mm thick ordinary quality and glazing with oil putty/beading etc exc 0.50 Sqm each all as specified including removal of old broken glass

S & F in repairs Brass, 2 lever, locks, drawer, grade-I of 50 mm size complete all as specified and directed.

S & F in repairs mild steel 4 lever mortice lock, vertical type 100 mm size complete all as specified and directed.

S & F in repairs casement stays of size 250 mm with hinged joint and two plates, with studs complete all as specified and directed.

Dismantling boarding including fittings, if any, any description fixed in any position with nails complete all as specified and directed.

M&L for 9mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination fixed with screws to timber frame work complete all as specified and directed.

M & L 12mm thick Prelaminated plywood, prelaminated on both sides with decorative choice laminations, fixed with screws to timber frame work as in cupbords, warddrops, kitchen covered cabinet etc including teak wood beading around the plywood/ teakwood lipping shall be finished with two coats of French polish.

M & L 18/19mm thick Prelaminated plywood, prelaminated on both sides with decorative choice laminations, fixed with screws to timber frame work as in cupbords, warddrops, kitchen covered cabinet etc including teak wood beading around the plywood/ teakwood lipping shall be finished with two coats of French polish.

S&F in repairs stainless steel telescopic channel for drawer with heavy ball bearing any size (10"/12"/14/16"/18" inches) complete all as specified and as directed.

S & F in repairs butt hinges medium weight cold rolled mild steel 100 mm long complete all as specified and directed.

S&F in repairs Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed

S&F in repairs Stainless steel peg rail having 6 Nos hook for hanging cloth complete all as specified and directed.

S&F in repairs aluminium plate type-II Gate and shutter, hooks and eyes 150mm complete all as specified and directed.

S&F in repairs 75mm long half folded auto hinges complete all as specified and directed.

S&F in repairs venetian blind using cotton/Nylon fabric of size as required for windows/ Ventilators horizontally rolling up and down with double layer cloth including rolling device on top and power coated aluminium double layer pipe at bottom, incl operating rope etc all as specified and directed.

S&F in repair plastic water closet seat cover, closed pattern with flat bottom seat cover, mild steel chromium pated or aluminised hinging device and colour as approved complete all as specified and directed.

S&F in repair stainless steel plate rack of size approved pattern and size 0.90 x 0.60m and thickness of sheet 1mm complete all as specified and directed.

S&F in repair stainless steel plate rack of size approved pattern and size 1.20 x 0.90m and thickness of sheet 1mm complete all as specified and directed.

S&F in repairs stainless steel soap tray fixed with brass screws complete all as specified and directed.

S&F in repairs fancy type Bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe 15mm bore or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs Self-closing pillar taps, cast copper alloy, chro-mium plated, screwed for iron pipe and fixed to 15mm bore dia pipe complete all as specified and directed.

S&F in repairs Pillar taps,fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed to pipe complete all as specified and directed.

S&F in repairs Stop valve/angle vavles, cast copper alloy, fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm dia pipe complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repairs chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs glass cornershelf made out of 5 mm thick glass guarded with CP brass guards complete all as specified and directed.

S&F in repairs brass chrominium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed by Engr-in-Charge.

S& F in repairs health faucet, CP with flexible arm for pipe 15mm bore dia complete all as specified and directed by Engr-in-Charge.

S& F in repairs basin mixer with 450mm braided connection pipe complete all as specified and directed by Engr-in-Charge. Make : Jaquar/CERA/Prayag or equivalent

S& F in repairs brass chormium plated 3 in 1 wall mixer wth the provision of overhead shower and telephonic shower arrangement complete all as specified and directed by Engr-in-Charge. Make : Jaquar/CERA/Prayag or equivalent

S&F in repairs Grating doom 100 mm dia with waste hole of PTMT (minimum weight 40 grms) complete all as specified and directed.

S&F in repairs 32 mm dia waste pipe suitable for wash hand basin and sink complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern of 10 ltr capacity, low level, with inlet ball valve, float and handle including brackets and connections to pipes and fixing of chain and pull or lever, if any complete all as specified and directed.

S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F in repairs Vitreous China wash basin of size 630x450mm, white, pedestal type excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F in repairs sink with drainage board made of stainless steel 1 mm thick, kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, over all size of 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in repairs 32 mm dia waste coupling of PTMT half or full thread suitable for kitchen sink or wash hand basin (Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed.

S&F in repair Vitreous china wash down water closet pan (pedestal pattern) including connect to outgoing pipe and flush pipe (excluding fixing bolts, flushing cistern) complete all as specified and directed by Engr-in-Charge.

S&F Cascade type water closet with flushing cistern including seat cover and all necessary connections etc complete all as specified and directed by Engineer-in-Charge.

S&F in repairs straight glass shelf made out of 5 mm thick glass graded with CP brass guards complete all as specified and directed by Engr-in-Charge.

S&F in repairs toilet paper holder, brass, CP brass fitted to wall complete all as specified and directed by Engr-in-Charge. Make: Jaquar/CERA/Prayag or equivalent

S&F in repairs Towel rack with Lower Hanger (stainless steel) with hooks of size 600mmx200mm complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

S&F in repairs 20mm dia bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe

S&F in repairs 32mm dia bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe

S&F in repairs 110mm bore PVC (SWR) pipe of pressure rating 10kgf/cm2 fixed complete to walls, ceilings or in floors etc and including necessary scafolding where is required, complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) pipe of pressure rating 10kgf/cm2 fixed complete to walls, ceilings or in floors etc including necessary scafolding where is required, complete all as specified and directed.

Removing bib taps, stop cocks, pillar taps, angle cock etc and refixing in the same position after repairs/replacement of washer/plunger etc for arresting leakages complete all as specified and directed. Note: Rate of washer/Plunger etc shall be deemed to be included in contractor quoted rate.

S&F in repairs spindle for stop cock complete all as specifed and directed.

Cleaning of pipes of any dia after opening of bib taps, stop cock, angle cock, pillar taps and gate valve etc and refixing in same position after cleaning of pipes complete all as specified and directed.

S&F in repairs PVC overhead tank cover for tanks of capacity 1000 ltr incljuding locking bolts and securing the hinges in proper position complete all as specified and directed.

S&F in repairs PVC overhead tank cover for tanks of capacity 500 ltr incljuding locking bolts and securing the hinges in proper position complete all as specified and directed.

S&F in repairs tank connector, PVC suitable for fixing to outlet pipe of any description and 32mm dia bore commplete all as specified and directed.

S&F in repairs PVC gate valve with handle, fixed both end for PVC pipe of 32mm dia bore complete all as specified and directed.

Cleaning and removing all scale and dirt etc from tanks of capacity exc 500 and not exc 1000 ltrs and from mouth of circulation pipes etc complete all as specified and directed.

Cleaning and removing all scale and dirt etc from tanks of capacity exc 250 and not exc 500 ltrs and from mouth of circulation pipes etc complete all as specified and directed.

S&F in repairs ball brass valve, high pressure, with polyethene float and fly nut complete, screwed for iron pipe of brass ferrule of 25mm dia bore complete all as specified and direceted.

S&F in repairs 750 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of water tank all as specified in SSR Part complete all as specified and directed.

S&F in repairs 1000 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of water tank all as specified in SSR Part complete all as specified and directed.

Repairs only to flush pipe, soil waste pipe of WC for arresting leakage by providing bushes, washers, white cement, putty etc complete all as specified and directed.

Arresting leakage from joints between sink and granite slab by providing white cement, putty, M Seal etc complete all as specified and directed.

Repairs only to high/low level flushing cistern and arresting leakage of its internal fittings/washers complete all as specified and directed.

S&F in repairs internal fittings such as ball valve and float for flushing cistern complete all as specified and directed.

S&F in repairs complete set of internal fittings of Cascade type EWC for arresting leakage complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing .

S&F unplasticised PVC pipes 20 mm bore of prerssure rating 10 kgf/sqcm fixed complete to wall, ceiling or in floors any type of pipe

Supply only in repairs plastic water closet seatcover ,closed pattern with flat bottom and coner and mild steel chromium plated or aluminised hinging device.

Supply only in repairs flushing cistern 10 ltrs capacity PVC, syphonic action type, low level with inlet, ball valve ,float including bracket.

S&Fixed in repairs flush pipes of PVC low level cistern for pedestal pattern WC including all joints.

Supply only in repairs WHB vitreous china was basin, white, flat back excluding tap, waste pipe brackets size 550x400 mm.

S&Fixed in repairs looking mirror 600x450 mm size Covered with aluminium frame with ply wood/black board/AC building board fixed with screw

S & Fixed in repairs PVC (SWR) Floor trap of 75 mm outlet plain with grating including jointing with solvent cement.

Supply only in repairs 15 mm bore pillar taps, Cast Copper alloy, fancy type, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe.

S & F Brass chromium plated shower rose 125mm size with or without swivel joints any size including fixing to steel pipe or union 15mm bore,fixed in repair.

Supply and fix PVC (SWR) branch piece double (double Y) equal or unequal 110mm dia

Supply and fix PVC (SWR) bends 75mm dia any radius.

Supply and fix PVC (SWR) bends 110mm dia any radius.

S & F coloured ceramic tiles 7 to 8 mm thk (square /Rectangular ) area of each tile exc 0.06 sqm and n.exc 0.11 sqm ,in floors etc set and jointed in neat cement slurry and pointed with white cement or pigment to match with the shade of the tiles all as specified and as directed by Engineer-in-Charge.

S&F in repairs stop cock fancy type cast copper alloy (concealed type) 15 mm bore screwed down high pressure, with crutch or butter fly handle screwed both ends for pipe or for unions complete all as specified and directed by Engineer in charge.

S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples

Archana Transport

ARCHITRAVE CONSTRUCTIONS

S K ENGINEERS