Providing yard lighting around the High School Building, Play Ground and Open Auditorium area in SP Girls High School, Tirupati

Supply and Fixing of ISI Mark 25mm outer dia medium grade (1.80mm thickness) with IS:9537 part -3 P.V.C. pipe with all accessories fixing on chromium plated metallic base saddles for surface wiring on Brick / stone walls, RCC roofings, Trusses, channels including all labour charges etc., complete. (If PVC Pipes are fixed on Trusses / Channels with MS Clamps, the rate for MS Clamps will be paid Separately) Makes: Sudhakar / Finolex / Polycab / Kumar / AKG / Indian-tubes / GM / Anchor / Nandi / Polyline / Gold Medal

Supply and run of 3 wire of 36/0.3mm (2.5 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-B : Makes: Atlas / Gold medal / Delton / Standard /GM / RPG / V-Guard / HPL / Anchor / Orbit

Supply and run of 5 wire of 36/0.3mm (2.5 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-B : Makes: Atlas / Gold medal / Delton / Standard /GM / RPG / V-Guard / HPL / Anchor / Orbit

Supply and run of 3 wire of 56/0.3mm (4.0 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS pipe /PVC Trunking for mains including all labour charges etc., complete. Grade-B : Makes: Atlas / Gold medal / Delton / Standard /GM / RPG / V-Guard / HPL / Anchor / Orbit

Supply and fixing of 16 /20 Amps 1 Way 1 Module Modular Switch on to the existing metal box (Switch Control Box) cover frame and giving necessary connections including all labour charges etc., complete. Grade-A: Makes: Legrand Arteor / Schneider Zen cello / Goldmedal (GIFA) / L&T englaze / Crabtree - Murano - Amare - Ducor / GM Four-Five

Fixing of M.V / S.V / M.H luminaire / Halogen fitting on wall / pole cross arm / channel / stem pipe etc., including all labour charges and giving connections etc., complete.

Supply and fixing of 1No of 100Amp, 415V, Porcelain rewirable fuse unit of approved make on the existing board and including giving connections etc., complete. Make: C&S / Standard / HPL / Sputnik / Million / Gold Medal / Anchor / Bosma

Supply and fixing of 4 way SP & N Distribution board as per IS 8623; IS 13032; IEC 61439-3. with IP-30 protection (Metal door) firmly concealed in the wall with neat plastering etc., complete. Grade-A: Make: Legrand(Ekinox 3) / Schneider-Acti9 / Hager -Novello+ / Seimens / Havells STADx / L&T-Newrang / Indoasian (Opti Pro)

Supply and fixing of 6 to 32 Amps range S.P MCBs 10 KA breaking capacity 'C'/ 'D' Curve ISI Mark as per IS:60898-1:2002 in the existing board and giving necessary connections. Grade-A: Makes: Legrand DX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

supply and fixing of 40 to 63 Amp TP MCBs 10 KA breaking capacity 'C'/ 'D' Curve ISI Mark as per IS:60898-1:2002 in the existing board and giving necessary connections. Grade-A: Makes: Legrand DX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro).

Supply and fixing of 125A 3 Pole MCCB, Adjustable Confirms to IEC 60947-2 and IS 13947-Part 1&2 having Breaking Capacity 25 KA with thermal magnetic release in the existing board including internal connections and Labour charges etc., complete. Grade-B: Makes: ABB / Standard / Havells-euro II / C&S / L&T / GM / Goldmedal / Hager / Indoasian.

Only fixing of post top lantern fitting on gate pillars by providing 40mm GI pipe 'B' class of 0.75mts length embedded at center of the pillar with neat cement packing etc., 1 No. of 12'' x8''x6'' MS box with locking arrangement with hinged doors has to be concealed at the bottom of the pillar. A 6mm thick hylum sheet is to be provided inside the MS box with brass bolts, nuts and washers etc., and fixing 1 No. of 6-32A SP MCB inside the box, 19 mm dia 2 mm thick PVC pipe should be concealed in the pillar from MS box at the bottom of the pillar to the top of the pillar center place and 2 wire run of 36/0.3 mm PVC insulated copper cable is to be drawn from the MS box to the fitting and giving necessary connections to the 6-32A SP MCB and fitting. Painting should be done with two coats of enamel gray / yellow paint to the GI pipe and to the MS box over one coat of red oxide as directed during execution.

Supply & fixing of 1" dia 'B' class GI pipe not exceeding 1.5Mtr long with necessary bending (120° to 135°) to the wall or to the pole as directed during execution duly grouting 2 Nos. of MS angle of 35x35x5mm having length 20Cm (grouted portion of MS angles into the wall 7.5cm) and fixing with 2 Nos. of MS clamps fabricated with 25mmx3mm MS flat with suitable holes and 4 Nos. of 3/8"x2" MS bolts, nuts & washers for fixing on the wall / 2 Nos. of suitable MS clamps with bolts, nuts for fixing to the pole etc., complete. A 16Amp fuse unit is to be fixed to the MS angle / clamp and giving necessary connections with 14/0.3mm PVC copper flexible wire from pole to the fuse unit and to the fitting or from Ceiling rose in the building to the fuse unit and to the fitting with link clips etc., and the GI pipe has to be painted with two coats of enamel grey paint over one coat of red oxide paint. Fixing charges for stem pipe including the cost of MS angle, MS clamps, bending of pipe, bolts, nuts, fuse units etc.

Design, Fabrication, Supply, Installation and Commissioning of Outdoor type timer box of size 600mm(W) x 600mm(H) x 300mm(D) and made with 14SWG CRCA sheet steel cleaning with 7 tank process and painting with powder coating. The box shall be made by provide rubber beeding, door knobs etc., and the front door with double leaf arrangement with hinges and locking arrangement. Suitable heat Dissipation / Air / Ventilation ducts with inside wire mesh shall be provide to the panel. The box base shall be mounted on 40x40x6mm MS angle with stand legs at 4 corners at a length of 700mm each of 40x40x6mm MS angle with necessary welding and the angles shall be painted with two coats of enamel black paint over one coat of red-oxide. The timer box legs should be fixed in ground of size 400mm depth by using 20mm HBG metal in 1:3:6 ratio. A 9 Ply - 18 mm thick plywood sheet of size 0.50 m x 0.50m to fix inside the box and the following shall be supply and fix firmly on the ply wood sheet and giving necessary connections between Isolator - contactor - timer - out going MCBs etc., with suitable size of PVC copper wires /bus links and suitable holes to be made at bottom sheet of the box for incoming / outgoing cables and install the box at site as directed during execution by the site Engineer.

a) Incoming: 63A FP Isolator - 1 No. b) Out Goings: 40A 4-pole MCB - 2 Nos. c) LED indicator lamps - 3 Nos. d) ML - 4 3 Pole, 415 V Power Contactor L & T) - 1 No. e) Togele / 6 Amps 2 Way Switch and giving connections.- 1 No. f) Digital Time Switch (L & T) - 1 No. g) An earthing terminal should be provide to the box. h) Danger name plate -1 No. i) The ratings of switches, feeder name, bus bar / cable chamber etc., shall be indicate on panel with stickering letters as directed during execution.

Supply and fixing of 155 X 210 X 92 mm Sizes thermo plastic cable junction boxes with IP66/67 weather proof, for outdoor installation with konckouts for cable entry including 1 No. 6 to 32A SP MCB & terminals etc., complete (sizes in mm) Make : Hensel / Sadhrish / Sintex

Supply and transportation of 16 Sq.mm 4 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.

Laying of U.G cables upto 50 Sq.mm and back filling of trench including labour charges etc., complete.

Supply and making end termination with heavy Alluminium lugs (pin / ring type) upto 16 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet.

Supply and fixing of fabricated M.S clamps made out of 25mm x 3mm MS flat with necessary holes on either side with 1 1/2" coach screws and painting 2 coats of enamel black paint over one coat of red oxide suitable for fixing of UG Cables of size 10 Sq.mm to 16 Sq.mm on walls etc. including all labour charges etc., complete.

Supply and fixing of 4 Module Hot Dip Galvanized 20 / 18 SWG Module box with earthing terminal concealed in wall with all required accessories including masonry work and all labour charges etc., complete. Make: Legrand / G.M / L&T / GM Four-Five / Legrand Arteor / Schneider / Anchor / Clipsal / Havells / ABB / Indo Asian / Siemen / Fortune Art.

Providing independent earthing with 2Kgs. (15mts.) of No. 8 SWG GI wire for coil earthing in an earth pit of size 2'x2'x4' and filled with alternate layers of 20 Kgs. Of hard coke, 10 Kgs. of salt and required quantity of sand and connecting the GI wire to the pole/ pipe with 3/8" x 3" GI bolts and nuts and washers as directed during execution.

Providing of Independent Chemical Earthing after excavating an earth pit of size1.5 m X 0.9 m X 2.05 m(Top 1.50 m X 0.90 m X 0.9m & bottom 1.20 m X 0.90 m X 1.15 m) with the following specification: (a) The Earth Electrodes, 40mm dia, wall thickness 3.25 mm, terminal Size 25x8 mm, terminal hole dia 12 mm, 2 meter long, galvanized, including 1 bag (25Kg to a bag) of Earth Life Compound, as per IS 3043, Base Metal: IS marked branded mild steel pipes. Makes: Potential / Shake Hands / Mars / Tirumala / Arshlok earthing. b) The Earth Electrode shall be inserted into the ground for 1.75 Mtrs. Below the inspection chamber bottom 300mm all around this Earth Electrode shall be covered with 25 Kgs. Of Earth Life Compound (c) The excavated gap shall be back filled with excavated earth, and shall be properly consolidated with water. (d) The top 0.25 m of Earth pipe shall be exposed into inspection chamber of Hume pipe . The all around inspection chamber shall be providied with 18" dia hume pipe. Earth connections shall be given to the Earth Elecrods with bolts, nuts & washers. (e) A 65 mm dia PVC conduit is to be embeded through hume pipe at one side, to lay the Earth from the Earth bus to the Electrode through the PVC conduit and after laying the Earth, the pit entry PVC conduit is to be sealed with Bitumen compound. (f) Necessary Meggar testing is to be done in the presence of the concerned Engineers, and the reading should be as per IE standards.

Earth Work excavation for trench for laying of U.G. Cable in ordinary Soils, manual means to the required width and depth and depositing the same on bank as directed during execution etc., complete.

Cutting open cement concrete road

Cement concrete using 20mm HBG metal in CC (1:3:6) laid in Layers of not more than 15cms thick well compacted including curing cost and conveyance of materials etc., complete.

Supply and Transportation of 40W LED Post top lantern made with cast Aluminum with decorative opal polycarbonate diffuser with IP 65 protection etc., complete with all accessories with not less than two years warranty. Makes: Phillips / Crompton / Havells only

Supply and transportation of 60 W LED Street light Luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass, supply input voltage 120 - 270V AC, P.F > 0.90, high power LEDs having System Efficacy >=120 lumens/watt and junction temperature < 70°C, with Ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5/Sec-3), driver surge protection 4KV, in-house additional Surge protection 10 KV with optics distribution, THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. Make: Phillips only

Supply and transportation of 120 W LED High Bay Luminaire with high power COB LED made of pressure diecast aluminum housing with powder coated, supply input voltage 120 - 270 V AC, P.F > 0.90, high power LEDs, having system efficacy >=120 lumens/watt and junction temperature < 70°C, with ingress protection IP66, IK05, Driver surge protection 4KV, in-house additional surge protection ≥ 5KV with wide/narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, , CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. Makes: Phillips / Crompton / Havells only

Fabrication, Transportation and supply of hot dip galvanized Octogonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with Hinged door opening arrangement, including the supply of suitable boards with bakelite sheet as per IS specification suitable to withstand the wind speed of 180 KMPH for 5.0 Mtrs height Pole having dimentions Bottom 130 mm,. Top 70mm with 3mm thick, base plate 200 x 200 x 12mm and 4 Nos of M20 x 700 long J bolts along with template. Makes: Bajaj / Valmont/Laasma /Transrail/ utkarsh /Skipper

Foundation and erection charges with special T&P, for 7.50 Mtrs long Octagonal /Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.45Mtr x 0.45Mtrs x1.20 Mtr size M20 cc work vibrated concreting mixing with necessary steel (10kgs) reinforcement and curing for 7 days as directed by the field engineers during execution including excavation of Earth/BT all labour charges and cost and conveyance of materials etc., complete.

Fabrication, Transportation and supply of 1.50 Mtr Length Single Arm Bracket made with MS galvanized 40mm / 50mm dia Pipe. Makes: Bajaj / Valmont / Laasma / Transrail / Utkarsh / Skipper

Fabrication, Transportation and supply of 1.50 Mtr Length Double Arm Bracket made with MS galvanized 40mm / 50mm dia Pipe. Makes: Bajaj / Valmont / Laasma / Transrail / Utkarsh / Skipper

(Rupees Eight Lakh Forty Six Thousand Nine Hundred Eighty One and Paise Eleven only)