WBMAD/NDITA/56/2021-22/SL-1

Amount

Construction of godown shed (15mtr x 10 mtr.) after removal of existing debris, all as per direction & design of the E.I.C. & including of GST & other taxes & transportation etc.; as per follows:- i) Base Work:- Laying of old paver block, carrying from GN-9 over 75 mm thick cement concrete work for preparing under bed, approx 150 sq. mtr. including necessary earth work, sand filling and retaining brick wall work ii) Brick work:- 125 mm wide, with 1st class brick in cement mortar (1:4), approx. 2 mtr. in height & 48 mtr. in running mtr. Including 16 nos. brick pillar (0.25m x 0.25m) including necessary earth work, sand filling and soling, plastering & net cementing work iii) Frame Work:- a) At wall side- by fixing of Heavy G.I. Posts (100mm dia.) (3mtr. above the pillar at one side & 2mtr. above the pillar side at the other side & 0.5mtr. within the pillar), gapping of maximum 3 mtr. including priming & painting of all post by Black Japan paint; including fixation of a heavy G.I. pipe support, transversally at the middle of the posts at 4 sides.

b) At wall covering- By alloy coated BlueScope Steel sheet (1mm thick) including fixing by required screw & washer etc. c) At roof truss work- by Heavy G.I. pipe (75mm dia.) (Maximum gapping of 3 mtr.) connected to one another with G.I. pipe; fabrication including metal arc welding and fixing with bracket, gusset etc. The truss will be supported by required posts of Heavy G.I. pipe (75mm dia) (each gapping of 6 mtr. at long side & gapping of 3 mtr. at width side) including priming & painting of all post by Black Japan paint d) At roof thatch work- By alloy coated BlueScope Steel sheet 0.5 mm thick) including fixing by required screw & washer etc. e) Door & Window work- two nos. window (Size 300mm. x 300mm) along with a door [two leaf, each 2100mm X 900mm] alloy coated BlueScope Steel sheet (1mm thick) along with framing by MS Flat (75mm x 6mm) including fixing by required Hinge, screw etc. along with suitable locking system, including priming & painting of all MS Flat by Black Japan paint

iv) Rack Work:- a) Outer frame- at all side, by fixing (1mtr. apart from wall side) of Heavy G.I. Posts (100mm dia.) (3mtr. above the ground & 0.75mtr. below the G/L), gapping of maximum 3mtr. by digging hole (150mm dia) in all sorts of soil and subsequent through repacking the same with cement concrete, including fixation of a heavy G.I. pipe support, transversally at the middle of the posts at 4 sides. b) 2 nos. rack (each will be at 1mtr. gap) will be made of MS Flat (30mm x 3mm) gapping of each maximum 300mm., fabrication including metal arc welding, including priming & painting of all by Black Japan paint v) Rain water disposal work:- with supporting of one no. 100mm dia. CPVC pipe at back side of the structure vi) Lighting work:- with 4 nos. 250W IP-65 LED Flood light along with necessary switch board, MCB, wiring, u/g cable laying from nearer power source etc. vi) Carriage Road Work:- Laying of old paver block, carrying from GN-9 over 75 mm thick cement concrete work for preparing under bed, approx 60 sq. mtr including necessary earth work, sand filling and retaining brick wall work

PAL REGENCY

M. P. CONSTRUCTION

SKYLIMITS CONSTRUCTION