Providing 125KVA DG set at Govt Engineering College Wayanad Dt

Amount

SITC of DG Set and connected Electrical Works

od10744/2017_2018 : Supply, conveyance, Installation, testing & commissioning of 125KVA/100KW silent Diesel Generator set in acoustic enclosure as per CPCB II approved with standard accessories as per technical details given below. 1. Engine : a) Make of Engine: Cummins/Koel/Escorts/Mahendra b) Type of Engine - Diesel Engine c) No. of Cylinders - As per manufactures standards. d) Method of Cooling - liquid cooled with radiator e) Design - Suitable for generating set operation 2.Standard accessories with Diesel Engine a) Fly wheel to suit flexible coupling b) Close Coupling c) Air cleaner d) Radiator with fan provided with fan guard. e) Fuel Pump f) Fuel filter g) Lubricating oil filter h) Exhaust silencer i) Exhaust Muffler j) Battery Charger/Generator 3. Engine Instrument Panel with the following items a) Starting switch with key or button b) Lubricating oil pressure gauge. c) Water temperature gauge. d) RPM Indicator with hour meter e) Battery charging Ammeter 4. Safety Controls for Engine a) Trip for low lubricating oil pressure b) Trip for high water temperature. 6. Alternator Brushless self excited conforming to IS4722/1992 a) Make: Stanford /Kirloskar/KEL/ Greaves b) Type - Self exited and self regulated. c) Capacity: 100KW/125KVA d) System of Voltage: 3phase, 415V e) Frequency - 50 Hz f) Insulation - Class F/H. Operation and service manual, spares and tools shall be provided. 7. Fuel Tank Suitable size built in type integrated with the acoustic enclosure Fuel connection shall be done as per standards 8. Battery 12V Suitable size built in type integrated battery with leads and terminals of appropriate AH capacity as per Manufactures requirement. Automatic Battery charger Solid state phase indication lamp for supply ON/OFF with HRC protection, micro processor based control panel as per kerala Electrical Inspectorate requirements, with MCCB protection and accessories such as Multi function meter, separate Energy meter etc. complete.

14.1 : Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres.

14.7 : Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.

14.11 : Providing brick work (in width 225 mm or more) with F.P.S. bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) at all levels.

14.12 : Providing 15mm thick cement plaster of mix 1:4 (1 cement : 4 fine sand) at all levels.

od10746/2017_2018 : Providing, laying and fixing 80mm dia G.I. pipe (medium class) complete with G.I. fittings for extending DG set exhaust etc as required.

90.12.5.1 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.2 core 4 sq mm

90.12.5.33 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 150 sq mm

90.12.6.1 : Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.2 core 4 sq mm

90.12.6.33 : Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.3.5 core 150 sq mm

od10748/2017_2018 : Supply & laying of one number PVC insulated and PVC sheathed armoured copper Control cable of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required. 12 core 2.5 sq mm

9.1.1 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 6 sq. mm (19mm)

9.1.26 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 150 sq. mm (50mm)

od10750/2017_2018 : Supplying and making end termination with brass compression gland for 12Core 2.5Sqmm of PVC insulated and PVC sheathed copper conductor control cable as required.

90.12.10.6 : Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation110/94 mm or nearest size

90.14.10.17 : Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.320A/400A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with overload setting of 50 - 100% having adjustable OL & SC

90.14.2.1 : Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

90.14.6 : Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.

90.14.7 : Supply and providing copper earth bus in the panel board

5.4 : Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, andproviding masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

od10752/2017_2018 : Supply and providing and fixing 2 X 25 mm X 3 mm Copper strip test joint for earthing system

od10754/2017_2018 : Supply and providing and fixing 25 mm X 3 mm Copper. strip earth lead from the test joint to the earth plate

od10756/2017_2018 : Supplying and laying 25 mm X 3 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

od10716/2017_2018 : Providing and fixing earth bus of 25mm X 3 mm copper strip on surface for connections etc. as required.

5.19 : Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

od10719/2017_2018 : Supply of superior quality 4.00mm copper earth socket and including crimping etc. as required.

od10722/2017_2018 : Supply and providing 25x6mm brass nut and bolt etc. as required.

od10723/2017_2018 : Supply and providing 25x3mm brass nut and bolt etc. as required.

od10760/2017_2018 : Painting letters or figures with enamel paint as identification mark to SB, DB, panel board etc as required

od10762/2017_2018 : Supply and providing First Aid Chart duly framed and placed in a conspicuous location for clear vision.

od221911/2018_2019 : Supply and providing 9 Litre capacity GI Fire Bucket painted in post office red with primer coat of red oxide and written with white paint 'FIRE' mounted on MS angle frame work/ wall bracket filled with fine sand, painting the bracket/ floor stand including making good the damages, colour washing etc. as required

od221913/2018_2019 : supply and providing 4.5Kg Dry Chemical Powder Type fire Extinguisher with hose and clamps including fixing it to wall as required.

od10768/2017_2018 : Supply and fixing 75/5A CL-5P10 neutral CT in existing enclosure

od10770/2017_2018 : Supply and fixing the MC12 relay in existing enclosure

od10776/2017_2018 : Supply and wiring with PVC insulated stranded single core copper conductor cables for interconnecting the control devices/ equipments including the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required. 1.5Sqmm single run

od10772/2017_2018 : Supply and fixing Danger notice board of size, 125 x 75 mm

od221905/2018_2019 : Supply and providing 2.00 mm thick, 3.3 kV, Synthetic elastromeric fire retardant insulating sheet

od10724/2017_2018 : Charges towards the preparation of necessary plan, scheme and other related papers for submission to KSELB & KSEB - First A3 Sheet

od10725/2017_2018 : Charges towards the preparation of necessary plan, scheme and other related papers for submission to KSELB & KSEB - Each Additional A3 Sheet

od10778/2017_2018 : Fee to be paid to KSELB towards scrutiny & inspection , meter testing etc (actual amount will be reimbursed on production of original documents)

SABI ENGINEERING COMPANY

Bidder Name

SABI ENGINEERING COMPANY

M P SUBASH