Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹148.7 CrAccepted-AOC | ₹148.7 Cr | L1 | Accepted-AOC L1 BEING LOWEST |
| 2 | L2₹219.2 CrRejected-Finance PLOT NO 16 OPP METRO PILLAR NO 190 PASCHIM VIHAR EXTENSION ROHTAK ROAD DELHI 110 063 | ₹219.2 Cr | L2 | Rejected-Finance other than lowest |
| 3 | Rejected-Technical | - | - | Rejected-Technical documents not valid |
| 4 | Rejected-Technical | - | - | Rejected-Technical not meeting PQC |
Tender Value
₹125 Cr
EMD Value
₹15 L
Closing Date
24 Sept 2024, 6:00 pmClosed
Neeraj Anand Offg Chief Engineer
HQ Chief Engineer Pathankot Zone Pathankot
PROVN OF MILITARY HOSPITAL, TECH AND OTM ACCN INCLUDING SERVICES AT YOL
2023_MES_615934_3
CA NO. CEPZ-17/2023-24
Open Tender
Civil Works
900 days
GE (KH) YOL
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹3,000
Yes
GE (KH) Yol
₹15 L
Yes
2 Jan 2025
5 Jul 2024
1 Oct 2024
5 Jul 2024
24 Sept 2024
16 Aug 2024
Amount
Lumpsum price worked out by the contractor for Building works as listed in Schedule 'A' Part-I.
Lumpsum price worked out by the contractor for Internal Water Supply Works as listed in Schedule 'A' Part-II.
Lumpsum price worked out by the contractor for Internal Electrification Works as listed in Schedule 'A' Part-III.
Lumpsum price worked out by the contractor for Earth Work and site clearance Works as listed in Schedule 'A' Part-IV.
Lumpsum price worked out by the contractor for Protective Works as listed in Schedule 'A' Part-V.
Lumpsum price worked out by the contractor for Roads, Path, Culverts and Hardstandings works as listed in Schedule 'A' Part-VI.
Lumpsum price worked out by the contractor for Sewage Disposal works as listed in Schedule 'A' Part-VII.
Lumpsum price worked out by the contractor for Area Drainage works as listed in Schedule 'A' Part-VIII.
Lumpsum price worked out by the contractor for Security fencing and Gate works as listed in Schedule 'A' Part-IX.
Lumpsum price worked out by the contractor for Rain Water Harvesting Works as listed in Schedule 'A' Part-X.
Lumpsum price worked out by the contractor for External Electrification Works as listed in Schedule 'A' Part-XI.
Lumpsum price worked out by the contractor for External Water Supply Works as listed in Schedule 'A' Part-XII.
Lumpsum price worked out by the contractor for Lightning Protection works as listed in Schedule 'A' Part-XIII.
Lumpsum price worked out by the contractor for DG Set works as listed in Schedule 'A' Part-XIV.
Lumpsum price worked out by the contractor for Fire Fighting works as listed in Schedule 'A' Part-XV.
Lumpsum price worked out by the contractor for Refrigeration Works as listed in Schedule 'A' Part-XVI.
BLANK
(BOQ Schedule 'A' Part-XVIII). Internal Electrification.
Supply and fix LED lamp 3W suitable for back plate for angle/ battern fitting. (Night Lamp)
Supply and fixing of indoor type surface mounted Linear LED fitting white CRCA powder coated with total system wattage 18-20W covered by PMMA acrylic diffuser, die cast aluminium housing, high efficiency reflecctor, prewired electronic driver complete with all accessories suitable for operation on single phase 240V 50Hz AC supply as required. LED shall be SMD type, fixture should have minimum efficacy >=100 lm/W and minimum system lumens 2000.
Supply and fixing of indoor type 10W surface/wall mounted LED batten fitting (Mirror Light) covered by diffuser, high efficiency reflecctor, prewired electronic driver complete with all accessories suitable for operation on single phase 240V 50Hz AC supply as required. LED shall be SMD type. (similar to BCLSB 10W LED Mirror light or equivalent) (LED Mirror Light/Bedhead side)
Supply and fixing of indoor type surface mounted downlighter white CRCA powder coated LED light fixture with total system wattage 10-12W covered by PMMA acrylic diffuser, die cast aluminium housing, high efficiency reflector, prewired electronic driver complete with all accessories suitable for operation on single phase 240V 50Hz AC supply as required. LED shall be SMD type, fixture should have minimum efficacy >=100 lm/W and minimum system lumens 1000.
Supply and fix portable Shadow less light fitting complete with emergency power unit & battery back up for min 30 minutes (3 KVA), having dome of 650 mm dia, fully counter balanced and fixed on suspension rod, capable of having axial rotation of 360 deg. The unit to be suitable for minor OT and Capable for operation on 230 V single phase, 50 cycles mains supply having lux level > 70,000. (For Major OT having lux level> 70,000)
M&L for PVC concealed conduit 15mm and all accessories (ISI marked) of 1.8mm thickness, heavy grade of suitable size for provision of passing of cable/wire for TV, Intercom, Tele phone , Data, complete all as specified and as directed.
M&L including terminations of Co-axial TV RG-6 grade, 0.7 mm solid annealed bare electrolytic grade copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
M&L Cable TV splitter 4Way O/G with 1-Way I/C complete incl mounting inside PVC Box of Suitble size flushed to wall.
M&L for modular TV Co-axial socket outlet 1 module on the existing modular plate & switch box including connections complete all specified and directed.
M&L for PVC conduit and all accessories (ISI marked) of 1.8mm thickness, heavy grade of suitable size for provision of passing of cable/wire for TV, Intercom, Tele phone , complete all as specified and as directed.
M&L for modular 250Volts Telephone socket outlet (RJ-11) with shutter 1 module on the existing modular plate & switch box including connections complete all as specified and directed.
M&L of 1 or 2 Module Modular base & cover plate on existing modular metal/PVC boxes etc. as required
M&L 1 or 2 Module (75 mmX75 mm) modules, 0.8mm thick GI box for modular switches in recess etc as required.
M&L for Telephone cables with high density polyethelene insulated, solid annealed high conductivity bare copper with DIA 0.5mm, paired , polyester taped and sheathed with high oxygen index Fire retardent PVC compound , generally conforming to ITD specifications G / WIR-06/02. May 94 of 4-Pair drawn through PVC conduit and connecting and testing complete.
Supply and fix exhaust Fan 300mm sweep, 900RPM, heavy duty complete with all acccessories internal pre wired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and as directed.
Supply and fix louvers suitable for exhaust Fan 300mm sweep of GI sheet incl fixing arrangement like nut, bolts, washers etc complete all as specified and as directed.
Supply and fix exhaust Fan 450mm sweep, 900RPM, heavy duty metal body complete with all acccessories internal pre wired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and as directed.
Supply and fix louvers suitable for exhaust Fan 450mm sweep of GI sheet incl fixing arrangement like nut, bolts, washers etc complete all as specified and as directed.
M&L for concealed point wiring with single core FRLS PVC insulated & unsheathed cable with multistranded copper conductor 1.5 sqmm drawn in & including PVC conduit of suitable size (ISI marked) having thickness not less than 1.8mm with all accessories heavy grade in wall/ceilling including FRLS PVC insulated unsheathed single core cable 1.5 sqmm copper wire as earth contunity conductor, complete all as specified for the following. Note : Wiring Color code i.e. Red for Phase, Black for neutral and Green for earth shall be maintained:-
(i) Three corridor light point controlled by one MCB Controlled. MCB Cost not include.
(ii) Four corridor light point controlled by one MCB Controlled. MCB Cost not include.
(iii) Five corridor light point controlled by one MCB Controlled. MCB Cost not include.
(iv) Six corridor light point controlled by one MCB Controlled. MCB Cost not include.
(v) Seven corridor light point controlled by one MCB Controlled. MCB Cost not include.
(vi) Eight corridor light point controlled by one MCB Controlled. MCB Cost not include.
(vii) Nine corridor light point controlled by one MCB Controlled. MCB Cost not include.
(viii) Ten light point controlled by one, Corridore light point controlled by one, MCB Controlled. MCB Cost not include.
LIGHT FIXURE INBUILT (PIR SENSOR) Supply and fixing of reccessed 2'x2' inbuilt PIR sensor white CRCA powder coated white after phosphochromate treatment. High transmittance polystyrene opal diffuser forglare free symmetric light distribution.High efficiency long life LED package with lumenefficacy of 140lm/W with a viewing angle of 120° to ensure better lumen output ( For detailed photometric data, please refer LM 79 report & IES file).Built in Isolated, SELV Output electronic LED driver (SMPS based constant current supply) with Output Short-circuit protection, Surge protection & other reliability test as per IS:15885 Part 2/Sec 13 & CISPR15. PIR sensors allow you to sense motion, almost always used to detect whether a human has moved in or out of the sensors range.They are small, inexpensive, low-power, easy to use and don’t wear out.
G.I. PERFORATED CABLE TRAY Supply, fabrication and installation of G.I. Sheet factory fabricated perforated type cable trays complete with all bends, tees, elbows, reducers etc. of various width (galvanisation thickness not less than 80 microns) with perforation not more than 17.5% in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. as per IS code 2629-1985. (The cost of angle iron/ 'C' Channel, Fastner & GI Down rod shall be included here).
(i) 100mm tray, 1.6mm thick 40mm collar.
(ii) 150mm tray, 1.6mm thick 40mm collar.
(iii) 300mm tray, 2mm thick 40mm collar.
(iv) 450mm tray, 2mm thick 40mm collar.
G.I. LADDER TYPE CABLE TRAY Supply, fabrication and installation of G.I. Sheet factory built in ladder type cable trays complete with all bends, tees, elbows, reducers etc. with rungs at every 250mm spacing of various width in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. as per IS code 2629-1985. (All bends & tee shall be of factory built-in of same make as that of tray).
(i) 450mm tray, 2mm thick, (75X15X2 side channel) (rung-35X15X2mm)
(ii) 600mm tray, 2mm thick, (75X20X2 side channel) (rung-35X15X2mm)
Nurse Call System Supply, Installation Testing and Commissioning of Microprocessor controller Nurses station with terminal monitor with in built power supply , with charger enclosed in a powder coated cabinet . Having with Reset, alarm/ buzzer, Call acknowledge with battery back up, battery charger complete system as per technical specifications and as per required of following suitable configuration. complte as required.
(ii) 16 Way
Supply Installation Testing & Commissioning of Bed Call Push Button with LED indication and Flexiable Cord with button , Call Reset , Call Indication, station for each Bed complete as required.
Supply Installation Testing & Commissioning of Pull cord station for toilet with LED indication and flexiable cord with button, Call Reset, Call Indication, station for complete as required.
Supply Installation Testing & Commissioning of LED Indicators Module at Outside of each ward complete as required.
Supplying & Laying of 4-pair Unshielded twisted pair with a cross filler (+), meeting Category 6 standards as per TIA-568C.2, The cable should be tested till 250 MHz , Shall be Fire-Retardant, Low-Smoke & Zero-Halogen as per IEC 60332-1, IEC 61034-2 & IEC 60754-1 respectively in the existing surface/ recessed Steel/ PVC conduit as required.
VTPNDB-1(12-WAY) TYPICALLY BLOCK-A, B, C, D & E (NON-ESSENTIAL / ESSENTIAL) & UPS O/P Panel (Indoor Use) INCOMER-1 FROM MDB-1,2,3,4&5 NON-ESSENTIAL / ESSENTIAL PANEL SUPPLY Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
8 way (4 + 24), Double door
12 way (4 + 36), Double door
Supplying and fixing Cable End Box (Loose Wire Box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc. as required.
(BOQ Schedule 'A' Part-XIX). . ELECTRICAL PANELS (INTERNAL AREA PANEL) . Design, Manufacture, Supplying, Transport to the site, Receiving, Unloading, Shifting to Sub-Station at various locations, handling, assembling, installation in correct aligned position, making proper connections, grouting with dash fasteners, GI nuts-bolts, testing and commissioning of the following Modular cubical type construction, Electrical Panels up to 450Volts ±10%, 3Phase, 4Wire, 50Hz ±6%, are housed in CRCA Sheet bolted cubicle made up of 3.15mm for non-stress members & 2.0mm for all stress bearing members and 3.15mm for Removable Glad Plate & base Frame Meterial, unless specified otherwise, vermin proof hinged lockable doors & door earthed for each compartment provide bus bar interconnections for incoming and outgoing, Single front compartmentalized, totally enclosed, free standing, Floor / Wall mounted type as case may, indoor (IP: 44) / semi outdoor (IP:54) / Fully Outdoor (IP:65), extendible type, duly wired up and ready for installation at site. The Bus bars will be Copper purity 99.9% / electrolytic grade E91 Aluminium duly sleeved with Helogen Free heat shrink coloured Insulated tube confirming to RoHS & IEC 6068-3-247 Standard. Provide electrical insulating shrouds, reusable type covers for busbars Boots on corners Panels will be painted with Powder coating (60-80micron as per IS:13871 for indoor and 90-100 micron for outdoor), include one size higher terminal block in cable alley and interconnecting wires between bus bars and terminals via MCB/MCCB. General Notes for site visit report for Panels/ Rising Main before submitting GA.
Labelling:- Computerised Laminated Aluminium Name Plate with White letters on Blue/Black Background For Each Feeder and Panel Itself. (q) The treatment of Panel Shall be Fully automatic 9-tank process for metal treatment which consists of Solvent/ Alkaline Degreasing, Activation, Water Raising, De-rusting, Phosphating, Passivation and Water drying. (r) A separate compartment for Minimum 20% spare space of Panel shall be provided for outgoings in future and busbars shall be drilled accordingly. (s) If mentioned fault and Automatic transfer switch rating is unavailable consider nearby upside rating. t) A separate compartment for Minimum 20% spare space of Panel shall be provided for outgoings in future and busbars shall be drilled accordingly. (u) Total Discrimination of system shall be checked and required setting shall be made. If any component required to change will change free of cost. The switch-gear & Panel manufacturer (jointly) will submit discrimination check report duly checked and signed on company letter head. (v) Indoor (IP: 44) / semi outdoor (IP:54) / Fully Outdoor (IP:65), extendible type, duly wired up and ready for installation at site as required. Note: All necessary interfacing shall provide an earmarked terminal boards for SCADA signals as per specification & requrments for each Electrical Panel. Note:- Refer to above General Notes and Specifications for Panels/ Boards follow Item no. 72 To 92.
Supplying, Receiving, fixing, testing & commissioning of below described SDB-1-BLOCK-A (GROUND FLOOR) FOR NON-ESSENTIAL LOAD DB-1 BLOCK-A (NON-ESSENTIAL PANEL) (Indoor use located at Basement, Lower Ground To Second floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
INCOMER-1 FROM MDB-1 NON-ESSENTIAL PANEL SUPPLY 1 Nos.125A TP+NL MCCB built in thermal magnetic based release (adjustable O/L & adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) Legrand to be check upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs, Class-1.0 and MFM True RMS type digital with min. features of measurements A,V,Hz and RS-485 port for BMS with class-1.0 accuracy for all outgoing feeder. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" on each incomer and outgoing MCCB TVSS AND BUS BARS 200 Amps TP+N, 25kA, 500volts grade busbar chamber of suitable length with Copper busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. OUTGOINGS 2 Nos. 63 Amp 4P MCB 5 Nos. 40 Amp 4P MCB
Supplying, Receiving, fixing, testing & commissioning of below described SDB-1, 2 & 3-BLOCK-B GROUND TO THIRD FLOOR FOR NON-ESSENTIAL LOAD. SDB-1, 2 & 3 BLOCK-B (NON-ESSENTIAL PANEL) (Indoor use located at Basement, Lower Ground To Third floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
INCOMER-1 FROM MDB-2 BLOCK-B NON-ESSENTIAL PANEL SUPPLY 1 Nos.125A TP+NL MCCB built in thermal magnetic based release (adjustable O/L & adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended.. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs, Class-1.0 and MFM True RMS type digital with min. features of measurements A,V,Hz and RS-485 port for BMS with class-1.0 accuracy for all outgoing feeder. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" on each incomer and outgoing MCCB TVSS AND BUS BARS 200 Amps TP+N, 25kA, 500volts grade busbar chamber of suitable length with Copper busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. OUTGOINGS 2 Nos. 63 Amp 4P MCB 5 Nos. 40 Amp 4P MCB
Supplying, Receiving, fixing, testing & commissioning of below described SDB-1-BLOCK-E SECOND FLOOR FOR NON-ESSENTIAL LOAD. SDB-1 BLOCK-E (NON-ESSENTIAL PANEL) (Indoor use located at Second floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
INCOMER-1 FROM MDB-4 BLOCK-D NON-ESSENTIAL PANEL SUPPLY 1 Nos.100A TP+NL MCCB built in thermal magnetic based release (adjustable O/L & adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs, Class-1.0 and MFM True RMS type digital with min. features of measurements A,V,Hz and RS-485 port for BMS with class-1.0 accuracy for all outgoing feeder. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" on each incomer and outgoing MCCB TVSS AND BUS BARS 150 Amps TP+N, 25kA, 500volts grade busbar chamber of suitable length with Copper busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. OUTGOINGS 5 Nos. 40 Amp 4P MCB 2 Nos. 63 Amp 4P MCB
Supplying, Receiving, fixing, testing & commissioning of below described SDB-1-BLOCK-A (FIRST FLOOR) FOR ESSENTIAL LOAD. SDB-1 BLOCK-A (ESSENTIAL PANEL) (Indoor use located at Basement, Lower Ground To Second floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
INCOMER-1 FROM MDB-1 BLOCK-A ESSENTIAL PANEL SUPPLY 1 Nos.160A TP+NL MCCB built in thermal magnetic based release (adjustable O/L & adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs, Class-1.0 and MFM True RMS type digital with min. features of measurements A,V,Hz and RS-485 port for BMS with class-1.0 accuracy for all outgoing feeder. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" on each incomer and outgoing MCCB TVSS AND BUS BARS 250 Amps TP+N, 25kA, 500volts grade busbar chamber of suitable length with Copper busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. OUTGOINGS 1 Nos. 63 Amp 4P MCB 4 Nos. 40 Amp 4P MCB 4 Nos. 32 Amp 4P MCB 1 Nos. 32 Amp DP MCB 2 Nos. 25 Amp 4P MCB
Supplying, Receiving, fixing, testing & commissioning of below described SDB-1-BLOCK-B ( LOWER GROUND FLOOR) FOR ESSENTIAL LOAD. SDB-1 BLOCK-B (ESSENTIAL PANEL) (Indoor use located at Basement, Lower Ground To Second floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
INCOMER-1 FROM MDB- BLOCK-B ESSENTIAL PANEL SUPPLY 1 Nos.160A TP+NL MCCB built in thermal magnetic based release (adjustable O/L & adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs, Class-1.0 and MFM True RMS type digital with min. features of measurements A,V,Hz and RS-485 port for BMS with class-1.0 accuracy for all outgoing feeder. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" on each incomer and outgoing MCCB TVSS AND BUS BARS 250 Amps TP+N, 25kA, 500volts grade busbar chamber of suitable length with Copper busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. OUTGOINGS 1 Nos. 63 Amp 4P MCB 5 Nos. 40 Amp 4P MCB 6 Nos. 32 Amp 4P MCB 2 Nos. 32 Amp DP MCB 2 Nos. 25 Amp 4P MCB
Supplying, Receiving, fixing, testing & commissioning of below described SDB-2 -BLOCK-B ( FIRST & SECOND FLOOR) FOR ESSENTIAL LOAD. SDB-2 BLOCK-B (ESSENTIAL PANEL) (Indoor use located at First floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
INCOMER-1 FROM MDB-2 BLOCK-B ESSENTIAL PANEL SUPPLY 1 Nos.160A TP+NL MCCB built in thermal magnetic based release (adjustable O/L & adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs, Class-1.0 and MFM True RMS type digital with min. features of measurements A,V,Hz and RS-485 port for BMS with class-1.0 accuracy for all outgoing feeder. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" on each incomer and outgoing MCCB TVSS AND BUS BARS 250 Amps TP+N, 25kA, 500volts grade busbar chamber of suitable length with Copper busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. OUTGOINGS 1 Nos. 63 Amp 4P MCB 1 Nos. 40 Amp 4P MCB 5 Nos. 32 Amp 4P MCB 1 Nos. 32 Amp DP MCB 6 Nos. 25 Amp 4P MCB
Supplying,Receiving, fixing, testing & commissioning of below described SDB-5 -BLOCK-B (THIRD FLOOR) FOR ESSENTIAL LOAD. SDB-3 BLOCK-B (ESSENTIAL PANEL) (Indoor use located at Basement, Lower Ground To Second floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
INCOMER-1 FROM MDB-2 BLOCK-B ESSENTIAL PANEL SUPPLY 1 Nos.160A TP+NL MCCB built in thermal magnetic based release (adjustable O/L & adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs, Class-1.0 and MFM True RMS type digital with min. features of measurements A,V,Hz and RS-485 port for BMS with class-1.0 accuracy for all outgoing feeder. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" on each incomer and outgoing MCCB TVSS AND BUS BARS 250 Amps TP+N, 25kA, 500volts grade busbar chamber of suitable length with Copper busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. OUTGOINGS 1 Nos. 63 Amp 4P MCB 1 Nos. 40 Amp 4P MCB 8 Nos. 32 Amp 4P MCB 1 Nos. 32 Amp DP MCB 7 Nos. 25 Amp 4P MCB
Supplying, Receiving, fixing, testing & commissioning of below described SDB-1 -BLOCK-C ( LOWER FLOOR) FOR ESSENTIAL LOAD. SDB-1 BLOCK-C (ESSENTIAL PANEL) (Indoor use located at Basement, Lower Ground To Second floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
INCOMER-1 FROM MDB-3 BLOCK-C ESSENTIAL PANEL SUPPLY 1 Nos.125A TP+NL MCCB built in thermal magnetic based release (adjustable O/L & adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs, Class-1.0 and MFM True RMS type digital with min. features of measurements A,V,Hz and RS-485 port for BMS with class-1.0 accuracy for all outgoing feeder. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" on each incomer and outgoing MCCB TVSS AND BUS BARS 200 Amps TP+N, 25kA, 500volts grade busbar chamber of suitable length with Copper busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. OUTGOINGS 1 Nos. 63 Amp 4P MCB 1 Nos. 40 Amp 4P MCB 10 Nos. 32 Amp 4P MCB 1 Nos. 32 Amp DP MCB 2 Nos. 25 Amp 4P MCB
Supplying,Receiving, fixing, testing & commissioning of above described SDB-3-BLOCK-C (THIRD FLOOR) FOR ESSENTIAL LOAD. SDB-3 BLOCK-C (ESSENTIAL PANEL) (Indoor use located at Basement, Lower Ground To Second floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
INCOMER-1 FROM MDB-3 BLOCK-C ESSENTIAL PANEL SUPPLY 1 Nos.100A TP+NL MCCB built in thermal magnetic based release (adjustable O/L & adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs, Class-1.0 and MFM True RMS type digital with min. features of measurements A,V,Hz and RS-485 port for BMS with class-1.0 accuracy for all outgoing feeder. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" on each incomer and outgoing MCCB TVSS AND BUS BARS 150 Amps TP+N, 25kA, 500volts grade busbar chamber of suitable length with Copper busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. OUTGOINGS 1 Nos. 63 Amp 4P MCCB 1 Nos. 40 Amp 4P MCB 3 Nos. 32 Amp 4P MCB 1 Nos. 32 Amp DP MCB
Supplying, Receiving, fixing, testing & commissioning of below described SDB-4-BLOCK-C (TERRACE FLOOR OT AHU) FOR ESSENTIAL LOAD. SDB-4 BLOCK-C (ESSENTIAL PANEL) (Indoor use located at Basement, Lower Ground To Second floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
INCOMER-1 FROM MDB-3 BLOCK-C ESSENTIAL PANEL SUPPLY 1 Nos.125A TP+NL MCCB built in thermal magnetic based release (adjustable O/L & adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs, Class-1.0 and MFM True RMS type digital with min. features of measurements A,V,Hz and RS-485 port for BMS with class-1.0 accuracy for all outgoing feeder. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" on each incomer and outgoing MCCB TVSS AND BUS BARS 200 Amps TP+N, 25kA, 500volts grade busbar chamber of suitable length with Copper busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. OUTGOINGS 4 Nos. 63 Amp 4P MCCB
Supplying, Receiving, fixing, testing & commissioning of below described SDB-4-BLOCK-C (SECOND FLOOR) FOR ESSENTIAL LOAD. SDB-2 BLOCK-C (ESSENTIAL PANEL) (Indoor use located at Basement, Lower Ground To Second floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
INCOMER-1 FROM MDB-3 BLOCK-C ESSENTIAL PANEL SUPPLY 1 Nos.160A TP+NL MCCB built in thermal magnetic based release (adjustable O/L & adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs, Class-1.0 and MFM True RMS type digital with min. features of measurements A,V,Hz and RS-485 port for BMS with class-1.0 accuracy for all outgoing feeder. Refer to Cat no. - Trinity-VAF. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" on each incomer and outgoing MCCB TVSS AND BUS BARS 250 Amps TP+N, 25kA, 500volts grade busbar chamber of suitable length with Copper busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. OUTGOINGS 1 Nos. 63 Amp 4P MCB 2 Nos. 40 Amp 4P MCB 6 Nos. 25 Amp 4P MCB 3 Nos. 32 Amp 4P MCB 1 Nos. 32 Amp DP MCB
Supplying, Receiving, fixing, testing & commissioning of below described SDB-1-BLOCK-D (FIRST FLOOR) FOR ESSENTIAL LOAD. SDB-1 BLOCK-D (ESSENTIAL PANEL) (Indoor use located at Basement, Lower Ground To Second floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
INCOMER-1 FROM MDB-4 BLOCK-D ESSENTIAL PANEL SUPPLY 1 Nos.200A TP+NL MCCB built in thermal magnetic based release (adjustable O/L & adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs, Class-1.0 and MFM True RMS type digital with min. features of measurements A,V,Hz and RS-485 port for BMS with class-1.0 accuracy for all outgoing feeder. Refer to Cat no. - Trinity-VAF. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" on each incomer and outgoing MCCB TVSS AND BUS BARS 250 Amps TP+N, 25kA, 500volts grade busbar chamber of suitable length with Copper busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. OUTGOINGS 1 Nos. 63 Amp 4P MCB 5 Nos. 40 Amp 4P MCB 7 Nos. 32 Amp 4P MCB 1 Nos. 32 Amp DP MCB 6 Nos. 25 Amp 4P MCB
Supplying, Receiving, fixing, testing & commissioning of below described SDB-2-BLOCK-D (SECOND FLOOR) FOR ESSENTIAL LOAD. SDB-2 BLOCK-D (ESSENTIAL PANEL) (Indoor use located at Basement, Lower Ground To Second floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry)..
INCOMER-1 FROM MDB-4 BLOCK-D ESSENTIAL PANEL SUPPLY 1 Nos.200A TP+NL MCCB built in thermal magnetic based release (adjustable O/L & adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs, Class-1.0 and MFM True RMS type digital with min. features of measurements A,V,Hz and RS-485 port for BMS with class-1.0 accuracy for all outgoing feeder. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" on each incomer and outgoing MCCB TVSS AND BUS BARS 250 Amps TP+N, 25kA, 500volts grade busbar chamber of suitable length with Copper busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. OUTGOINGS 1 Nos. 63 Amp 4P MCB 4 Nos. 40 Amp 4P MCB 3 Nos. 32 Amp 4P MCB 2 Nos. 32 Amp DP MCB 4 Nos. 25 Amp 4P MCB
Supplying, Receiving, fixing, testing & commissioning of below described SDB-3 -BLOCK-E (Second FLOOR) FOR ESSENTIAL LOAD. SDB-1 BLOCK-E (ESSENTIAL PANEL) (Indoor use located at Basement, Lower Ground To Second floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
INCOMER-1 FROM MDB-5 BLOCK-E ESSENTIAL PANEL SUPPLY 1 Nos.100A TP+NL MCCB built in thermal magnetic based release (adjustable O/L & adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs, Class-1.0 and MFM True RMS type digital with min. features of measurements A,V,Hz and RS-485 port for BMS with class-1.0 accuracy for all outgoing feeder. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" on each incomer and outgoing MCCB TVSS AND BUS BARS 200 Amps TP+N, 25kA, 500volts grade busbar chamber of suitable length with Copper busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. OUTGOINGS 1 Nos. 63 Amp 4P MCCB 1 Nos. 40 Amp 4P MCB 8 Nos. 32 Amp 4P MCB 1 Nos. 32 Amp DP MCB
Supplying, Receiving, fixing, testing & commissioning of below described Panel LIFT PANEL (Indoor use located at Basement, Lower Ground To Second floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry). INCOMER 1 No. 160A TPN MCCB METERING & INDICATION 1 set of R,Y,B phase indicating lamps 1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB 1 No. (0-160A) Ammeter with ASS with 3 nos. 160/5A CT's BUS-BAR 1 Set of 250A TPN Aluminium Bus Bar with colour coded PVC Sleeves OUTGOINGS 5 Nos. 63A 4P MCCB .
LIFT DB (Indoor use located at Basement, Lower Ground To Second floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry). INCOMER 1 No. 63A TPN MCCB+ELCB METERING & INDICATION 1 set of R,Y,B phase indicating lamps BUS-BAR 1 Set of 100A TPN Aluminium Bus Bar with colour coded PVC Sleeves OUTGOINGS 2 Nos. 40A TPN MCB . 2 Nos. 32A TPN MCB . 4 Nos. 16A SP MCB . 4 Nos. 10A SP MCB .
(BOQ Schedule 'A' Part-XX). FIRE FIGHTING SYSTEM
Supply and fix Mild Steel class 'C' diesel pump exhaust pipe 150mm dia with one layer of 25mm thick asbestos rope insulation and including all fitting clamp/ structural steel supports complete all as specified and as directed.
Supply and fix Automatic air release valve 50mm dia suitable for domestic water with 50mm gun metal stop valve complete all as specified and as directed.
Supply, instalation, testing & commissioning of Strainer 300mm dia for suction made from MS body with bottom and top removable flanges with nuts, bolts etc complete all as specified and as directed.
Supply, Installation, testing and commissioning of resilient rubber lined single arch Vibration eliminators suitable for raw water up to 45 C temperature, working pressure 10.0 kg/cm2 and test pressure 20 kg/cm2 for 200mm dia pipe complete all as specified and as directed.
All as per item no. 68 above but 150 mm dia pipe
All as per item no. 68 above but 65 mm dia pipe
All as per item no. 68 above but 50 mm dia pipe
SPRINKLER & ITS PIPING (FIRE FIGHTING SYSTEM)
Supply and fixing 25 mm dia inspection & testing assembly with gun metal Gate valve, gun metal sight glass, drain valve (Ball valve 50mm dia) & connection to drain. complete all as specified and as directed.
FIRE DETECTION & ALARM SYSTEM)
Supplying and Fixing FRLS insulated copper conductor, 2 core, 1.50 sqmm in existing steel conmduits all as specifed & as directed by Engineer-in-Charge.
Supplying and fixing of 25 mm dia. 1.6 mm thick ISI Mark M.S. conduit as per IS:9537 Part-3 along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit
Supply, Installation , Testing and Commissioning of Network Repeater Panel with minimum 10" Color Touch Screen display with QWERTY Keypad, mapping minimum 2,00,000 points on network. The NRP shall act as an independent node communicating on the peer to peer network and shall not be dependant on the Fire Panel CPU for operation. Failure of Fire Panel CPU shall not result in failure of NRP operation UL & FM Approved complete all as specified & as directed by Engineer-in-Charge.
Supply, installation, testing and commissioning of fire alarm control panel complying with BS EN54 & Vds 12 Loop panel with 250 detectors/Device (Detector & Device should be in any combination) should be expandable upto 20 Loops. (a) Loop length should be 1.6 KM (b) 7' color screen touch display (c) 10000 log history (d) Minimum 3 Ethernet port (2 for networking, 1 gor 3rd party integration) (e) Minimum 2 no of Rs 485 port (f) 24 hrs back-up with 24 volt sealed maintainence free batteries with automatic charger 30 mil backup during alarm condition. (g) OPC / Modbus should be inbuilt for BMS integration. (h) Controller should be 100% rebundant (j) With GSM dialer to message / call minimum 5 number
Supply, installation, testing and commissioning of Detectors complying with and type certified to EN-54 & Vds Addressable type heat detector with inbuilt isolator or with isolator base with rate of rise cum fixed temperature as per IS 2175. All required accessories like KB box, glands and etc should be part of proposal.
Supply, installation, testing and commissioning of Detectors complying with and type certified to EN-54 & Vds Addressable type multisensor detector with heat and smoke combination with inbuilt isolator base. All required accessories like JB box, glands and etc should be part of proposal - (above false ceiling).
Supply, installation, testing and commissioning of Detectors complying with and type certified to EN-54 & Vds Addressable type multisensor detector with heat and smoke combination with inbuilt isolator base. All required accessories like JB box, glands and etc should be part of proposal - (below false ceiling).
Supply, installation, testing and commissioning of Loop powered sounder um strobe, inbuilt isolator as per NFPA 72 (a) Minimum 24 different tone. (b) shall be loop powered (No extra power supply, cable or control module should be required) (c) Minimum 4 sound level (d) Sound pressure should be upto 92 dB.
S & F of addressable monitor module shall be EN-54 clarified
S & F remote response indicators shall be EN-54 clarified
S & F Addressable control module shall be EN-54 clarified
S & F Addressable monitor module shall be EN-54 clarified
S&F short circuit isolator EN 54 certified
Supply, installation, testing and commissioning of addressable automatic fire detector for monitoring of ventilation ducts which can perform alarm pattern analysis, with even response sensitivity for all fires with smoke development with inbuilt isolators as per NFPA 72 style 7 wiring requirements & special housing for accommodating the detector, such that the trigger display remains visible after installations, having features of contamination detection, detector remote inquiry, Self-monitoring, automatic addressing, Additional manual addressing for the use of existing networks with stub branches, Integrated isolators at input and output so that all elements in the loop maintain operational availability, even is there is a short circuit (Detectors without inbuilt isolators may be considered with an additional isolator Module per detector)
(i) Suction header for fire fighting :- M&L for fabrication of header made out of heavy duly MS Pipe 300 mm dia not less than 12 mm thick and not less than 10 mtr long duly painted and welded on both sides with suitable holes – 07 Nos of size two 250 mm dia (incoming) and 5 Nos outgoing (150 mm dia 3 Nos, 65 mm dia 02 Nos). Job includes welding 02 Nos, 250 mm dia, 3 Nos, 150 mm dia 02 Nos 65 mm dia MS pipe 600 mm long, heavy grade at one end and other end duly welded with MS flange having thickness not less than 10 mm, duly holes drilled matching with sluice valve flange 250 mm, 150m and 65 mm dia all as directed by Engr-in-Charge.
(ii) Delivery header for fire fighting :- M&L for fabrication of header made of heavy duty MS pipe 250 mm dia not less than 12 mm thick and not less than 10 mtr long duly painted and welded on both sides with suitable holes – 10 Nos of size three 150 mm (incoming), 04 Nos 80 mm dia (incoming) 03 Nos 150 mm dia (outgoing) Job included welding 6 Nos 150 mm dia, 04 Nos 80 mm dia MS pipe 600 mm long, heavy grade at one end and other end duly welded with MS flange having thicjness not less than 10 mm / duly holes drilled matching with sluice valve flange, 150 mm 80 mm all as directed by Engr-in-Charge.
FIRE FIGHTING SYSTEM (ELECTRICAL PANEL)
Supplying, fixing, testing & commissioning of FIRE FIGHTING PANEL (Indoor) use located at Ground floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry / Outdoor use located in external area on Rock or soft Soil as case may be with bottom cable entry.
Incomer :- 1 Nos. 400A TP+NL MCCB built in microprocessor based release (adjustable O/L, S/C & E/F) of fault breaking capacity 35 KA (Ics = Icu=100%) upto 415 V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides MCCB shall conforming to IS-1397-2 1993 as amended METERING, INDICATOR AND RELAYs :- PROVIDE 3 NOs. Resin cast CTs, Class -1.0 and MFM True RMS type digital with min. features of measurements A,V, Hz and RS-485 port for BMS with class -1.0 accuracy for all outgoing feeder. Refer to Cat No. Trinity – VAF. E-Series R,Y,B phase indication lamps with 4 Nos. SP HRC fuses as per fault requirement for each incomer.
Provide 3 Nos indicating lamps for status indication “ON” “OFF”, Tripped due to earth fault on each incomer . TVSS AND BUS BARS: - 600 AMPS TP+N, 50KA, 500 Volts grade bus bar chamber of suitable length with Aluminum busbars mount on SMC supports. All interconnections shall be with FRLS PVC insulated copper flexible colour coded wires, current density of bus-bars shall not be less than 1 Amps / sq.mm for Aluminum and 2 Amps / Sq.mm for copper cross sectional area of Bus Bar.
M & L Earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6.30mm thick buried directly in ground to a depth not less than 2.25 mtr below normal ground level with top edge of earth plate at a depth not less than 1.50 mtr below ground level, earth plate surrounded by 15 cm thick packed layer of charcoal and common salt alternatively upto 90 cm and connected with and including GI strip of size 32x6 mm by means of bolts, nuts, check nuts and washers of GI. 40 mm bore GI pipe light grade from earth plate up to testing point for protection of strip and 20 mm bore GI pipe medium grade with wire mesh and funnel for watering including necessary excavation and earth work PCC chamber (1:3:6) type C-2 with RCC cover complete all as shown in electrical plate No 3 of MES schedule Part I of SSR Part I (2009) complete all as specified. NOTES:- (i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B, 80 mm thick reinforcement with 8 mm TOR steel @ 100 c/c in lieu of CI cover and the rate includes in the unit rate of item. (ii) Earth electrode shall be protected upto test point using necessary arrangement with suitable size GI pipe and the rate includes in the unit rate of item. (iii) Earth pit chamber and RCC cover shall be painted with red paint over a primer coat and the rate includes in the unit rate of item.
M & L Earthing complete with copper earth plate electrode 60 cm x 60 cm x 3.15mm thick buried directly in ground to a depth not less than 2.25 mtr below normal ground level with top edge of earth plate at a depth not less than 1.50 mtr below ground level, earth plate surrounded by 15 cm thick packed layer of charcoal and common salt alternatively upto 90 cm and connected with and including copper strip of size 20 x 3 mm by means of bolts, nuts, check nuts and washers of GI. 40 mm bore GI pipe light grade from earth plate up to testing point for protection of strip and 20 mm bore GI pipe medium grade with wire mesh and funnel for watering including necessary excavation and earth work PCC chamber (1:3:6) type C-2 with RCC cover complete all as shown in electrical plate No 3 of MES schedule Part I of SSR Part I (2009) complete all as specified. NOTES:- (i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B, 80 mm thick reinforcement with 8 mm TOR steel @ 100 c/c in lieu of CI cover and the rate includes in the unit rate of item. (ii) Earth electrode shall be protected upto test point using necessary arrangement with suitable size GI pipe and the rate includes in the unit rate of item. (iii) Earth pit chamber and RCC cover shall be painted with red paint over a primer coat and the rate includes in the unit rate of item.
Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6.30mm thick buried directly in ground to a depth not less than 2.25 mtr below normal ground level with top edge of earth plate at a depth not less than 1.50 mtr below ground level, earth plate surrounded by 15 cm thick packed layer of charcoal and common salt alternatively upto 90 cm and connected with and including GI wire of size 4 mm by means of bolts, nuts, check nuts and washers of GI. 15 mm bore GI pipe light grade for protection of GI wire from earth plate to testing point for protection, 20mm bore GI pipe medium grade for water with wire mesh and funnel for watering including necessary excavation and earth work, PCC chamber (1:3:6) type C-2 with RCC cover complete all as shown in electrical plate No 3 of MES schedule Part I of SSR Part I (2009) complete all as specified. NOTES:- (i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B, 80 mm thick reinforcement with 8 mm TOR steel @ 100 c/c in lieu of CI cover and the rate includes in the unit rate of item. (ii) Earth electrode shall be protected upto test point using necessary arrangement with suitable size GI pipe up to 7.50 m and the rate includes in the unit rate of item. (iii) Earth pit chamber and RCC cover shall be painted with red paint over a primer coat and the rate includes in the unit rate of item. (iv) The earth chamber shall be constructed 5 m away from the edge of the bldg pit and the cost of the same is deemed to be included in the rate quoted for this item.
Supply and fix double compression steel gland for fixing armoured cable in panel of size 2 core 6 Sq mm to 16 sq mm size.
Description all as Sl Item No 97 but for cable of size 4 core 6 to 16 sq mm
Description all as Sl Item No 97 but for cable of size 4 core 25 to 35 sq mm.
Description all as Sl Item No 97 but for cable of size 3½ core 50 sq mm to 70 sq mm.
Description all as Sl Item No 97 but for cable of size 3½ core 95 sq mm to 120 sq mm.
Description all as Sl Item No 97 but for cable of size 3½ core 150 sq mm.
Description all as Sl Item No 97 but for cable of size 3½ core 240 sq mm to 300 sq mm.
Supplying, fixing hot dipped GI ladder type cable tray with 60mm collar including grouting / anchor fastener supports from wall/ceiling etc for the following:-
(i) 450mm tray, 2mm thick, (75X15X2 side channel) (rung-35X15X2mm)
(ii) 600mm tray, 2mm thick, (75X20X2 side channel) (rung-35X15X2mm)
(iii) 900mm tray, 2.5mm thick, (100X20X2.5 side channel) (rung-40X15X2.5mm)
Supply, installation, testing and commissioning of LED Gate Light 20-22W with spun aluminium white power coated top cover and seamless GI pipe bottom housing for control gear. Luminaire to be provided with base plate and fixing holes for directly mounting on the concrete pedestal. Power factor of greater PF>0.95 THD < 10% & ingress protection IP65 to be provided.
M&L for Junction Box of polycarbonate body top hinged including 3 phase and neutral aluminium bus bar of suitable capacity (280 x170 x130 mm) with hinges and locking arrangement MS clamp made of 40 x 3mm flat having aluminium bus bar (2 Nos) an MCB SPN for ON/OFF control of street light complete in all respect including 2 nos. gi pipe 1.5" dia having 1 mtr. length each and chuck nut for cable connection etc. as per direction of E/I.
M & L Wiring with 3x1.5 sq. mm. PVC insulated copper conductor 1100 V grade wires in existing pole including connecting at the lighting fixtures complete.
(BOQ Schedule 'A' Part-XXI). EXTERNAL ELECTRIFICATION. Supplying, fixing, testing & commissioning of Main LT Panel as described below. Main LT Panel Non-Essential (Indoor use located at Ground floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
Design, Manufacture, Supplying, Transport to the site, Receiving, Unloading, Shifting to Sub-Station at various locations, handling, assembling, installation in correct aligned position, making proper connections, grouting with dash fasteners, GI nuts-bolts, testing and commissioning of the following Modular cubical type construction, Electrical Panels up to 450Volts ±10%, 3Phase, 4Wire, 50Hz ±6%, are housed in CRCA Sheet bolted cubicle made up of 3.15mm for non-stress members & 2.0mm for all stress bearing members and 3.15mm for Removable Glad Plate & base Frame Meterial, unless specified otherwise, vermin proof hinged lockable doors & door earthed for each compartment provide bus bar interconnections for incoming and outgoing, Single front compartmentalized, totally enclosed, free standing, Floor / Wall mounted type as case may, indoor (IP: 44) / semi outdoor (IP:54) / Fully Outdoor (IP:65), extendible type, duly wired up and ready for installation at site. . The Bus bars will be Copper purity 99.9% / electrolytic grade E91 Aluminium duly sleeved with Helogen Free heat shrink coloured Insulated tube (make-GALA or Eq.) confirms to RoHS & IEC 6068-3-247 Standard. Provide electrical insulating shrouds, reusable type covers for busbars Boots on corners Panels will be painted with Powder coating (60-80micron as per IS:13871 for indoor and 90-100 micron for outdoor), include one size higher terminal block in cable alley and interconnecting wires between bus bars and terminals via MCB/MCCB.
INCOMER:-1, 2 & 3 FROM TRANSFORMER:- 3 No.1000 Amps TP+Neutral link EDO type Air circuit breaker built-in self powered micro-processor based releases for O/L,S/C,I/G&E/F of fault breaking capacity 50KA (Ics=Icu=Icw 100% upto 415V manually operated, Inbuilt Shunt Trip indication. fitted with interlocked door, door sealing frame, automatic safety shutters and frame earthing contact, additional min. 4NO + 4NC Auxiliary contacts, ACB conforming to IS-1397-2 (1993) and complice RoHS as amended up-to-date complete with following accessories for each complete with following accessories for each ACB. Terminals suitable for Bus duct connections on incomer side and bus bar connection at output sides. BUS - COUPLER:- 2 No. 1000Amps 4P EDO type Air circuit breaker without protection release of fault breaking capacity 50KA (Ics=Icu=Icw 100% upto 433V manually operated, Inbuilt Shunt Trip indication. fitted with interlocked door, door sealing frame, automatic safety shutters and frame earthing contact, additional min. 4NO + 4NC Auxiliary contacts, ACB conforming to IS-1397-2 (1993) and complice RoHS as amended up-to-date complete with following accessories for each complete with following accessories for each ACB, terminals suitable for Bus bar connections on both sides.
TVSS & BUS BARS SECTIONS:- 1500Amps TP+N, 50kA, 500volts grade busbar chamber of suitable length with Aluminium busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1 Amps/sq.mm for Aluminium and 2 Amps/sq.mm for copper cross sectional area of Bus Bar. OUTGOINGS CONNECTED AS SHOWN IN SLD:- 2 No.800 Amps TP+Neutral link EDO type Air circuit breaker built-in self powered micro-processor based releases for O/L,S/C,I/G&E/F of fault breaking capacity 50KA (Ics=Icu=Icw upto 415V manually operated, Inbuilt Shunt Trip indication. fitted with interlocked door, door sealing frame, automatic safety shutters and frame earthing contact, additional min. 4NO + 4NC Auxiliary contacts, ACB conforming to IS-1397-2 (1993) and complice RoHS as amended up-to-date complete with following accessories for each complete with following accessories for each ACB. Terminals suitable for Bus duct connections on incomer side and bus bar connection at output sides. 2 Nos. 630A TP+NL MCCB built in microprocessor based release (adjustable O/L,S/C&E/F) of fault breaking capacity 35KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended.
8 Nos. 400A TP+NL MCCB built in microprocessor based release (adjustable O/L,S/C&E/F) of fault breaking capacity 35KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended 1 Nos. 315A TP+NL MCCB built in microprocessor based release (adjustable O/L,S/C&E/F) of fault breaking capacity 35KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended 3 Nos. 250A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C & adjustable E/F) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended 3 Nos. 200A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C & adjustable E/F) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended
Labelling:- Computerised Laminated Aluminium Name Plate with White letters on Blue/Black Background For Each Feeder and Panel Itself. (q) The treatment of Panel Shall be Fully automatic 9-tank process for metal treatment which consists of Solvent/ Alkaline Degreasing, Activation, Water Raising, De-rusting, Phosphating, Passivation and Water drying. (r) A separate compartment for Minimum 20% spare space of Panel shall be provided for outgoings in future and busbars shall be drilled accordingly. (s) If mentioned fault and Automatic transfer switch rating is unavailable consider nearby upside rating. (t) A separate compartment for Minimum 20% spare space of Panel shall be provided for outgoings in future and busbars shall be drilled accordingly. (u) Total Discrimination of system shall be checked and required setting shall be made. If any component required to change will change free of cost. The switch-gear & Panel manufacturer (jointly) will submit discrimination check report duly checked and signed on company letter head. (v) Indoor (IP: 44) / semi outdoor (IP:54) / Fully Outdoor (IP:65), extendible type, duly wired up and ready for installation at site as required. Note: All necessary interfacing shall provide an earmarked terminal boards for SCADA signals as per specification & requrments for each Electrical Panel. Note:- Refer to above General Notes and Specifications for Panels/ Boards follow Item no. 38 To 58.
Supplying, fixing, testing & commissioning of AMF PANEL Cum Emergency Panel as described below. Main LT Panel Essential (Indoor use located at Service Building on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
INCOMER D.G. SET - 1&2 500 kVA . INCOMER LT PANEL NON-ESSENTIAL BUS SECTION-I&II 2 No. 800 Amps TP+Neutral link EDO type Air circuit breaker built-in self powered micro-processor based releases for O/L,S/C,I/G&E/F of fault breaking capacity 50KA (Ics=Icu=Icw upto 415V manually operated, Inbuilt Shunt Trip indication. fitted with interlocked door, door sealing frame, automatic safety shutters and frame earthing contact, additional min. 4NO + 4NC Auxiliary contacts, ACB conforming to IS-1397-2 (1993) and complice RoHS as amended up-to-date complete with following accessories for each complete with following accessories for each ACB. Terminals suitable for Bus duct connections on incomer side and bus bar connection at output sides. 1 Nos. 630A TP+NL MCCB built in microprocessor based release (adjustable O/L,S/C&E/F) of fault breaking capacity 35KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended 1 No. 800 Amps TP+Neutral link EDO type Air circuit breaker built-in self powered micro-processor based releases for O/L,S/C,I/G&E/F of fault breaking capacity 50KA (Ics=Icu=Icw upto 415V manually operated, Inbuilt Shunt Trip indication. fitted with interlocked door, door sealing frame, automatic safety shutters and frame earthing contact, additional min. 4NO + 4NC Auxiliary contacts, ACB conforming to IS-1397-2 (1993) and complice RoHS as amended up-to-date complete with following accessories for each complete with following accessories for each ACB. Terminals suitable for Bus duct connections on incomer side and bus bar connection at output sides.
BUS - COUPLER 1 No. 800Amps 4P EDO type Air circuit breaker without protection release of fault breaking capacity 50KA (Ics=Icu=Icw upto 433V manually operated, Inbuilt Shunt Trip indication. fitted with interlocked door, door sealing frame, automatic safety shutters and frame earthing contact, additional min. 4NO + 4NC Auxiliary contacts, ACB conforming to IS-1397-2 (1993) and complice RoHS as amended up-to-date complete with following accessories for each complete with following accessories for each ACB, terminals suitable for Bus bar connections on both sides. 1 No. 400Amps 4P MCCB circuit breaker without protection release of fault breaking capacity 50KA (Ics=Icu=Icw upto 433V manually operated, Inbuilt Shunt Trip indication. fitted with interlocked door, door sealing frame, automatic safety shutters and frame earthing contact, additional min. 4NO + 4NC Auxiliary contacts, ACB conforming to IS-1397-2 (1993) and complice RoHS as amended up-to-date complete with following accessories for each complete with following accessories for each ACB, terminals suitable for Bus bar connections on both sides. METERING, INDICATOR AND RELAYs . E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Electrical & mechnically Interlocking between all incomers and bus coupler (if) in such a way two different source supply are not pallel at one time.
OUTGOINGS 2 No. 800 Amps TP+Neutral link EDO type Air circuit breaker built-in self powered micro-processor based releases for O/L,S/C,I/G&E/F of fault breaking capacity 50KA (Ics=Icu=Icw upto 415V manually operated, Inbuilt Shunt Trip indication. fitted with interlocked door, door sealing frame, automatic safety shutters and frame earthing contact, additional min. 4NO + 4NC Auxiliary contacts, ACB conforming to IS-1397-2 (1993) and complice RoHS as amended up-to-date complete with following accessories for each complete with following accessories for each ACB. Terminals suitable for Bus duct connections on incomer side and bus bar connection at output sides. 1 Nos. 400A TP+NL MCCB built in microprocessor based release (adjustable O/L,S/C&E/F) of fault breaking capacity 35KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended 1 Nos. 315A TP+NL MCCB built in microprocessor based release (adjustable O/L,S/C&E/F) of fault breaking capacity 35KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended 3 Nos. 250A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C & adjustable E/F) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended
3 Nos. 200A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C & adjustable E/F) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended 3 Nos. 160A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C & adjustable E/F) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended 3 Nos. 125A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C & adjustable E/F) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended 2 Nos. 100A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C & adjustable E/F) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended 1 No Surge protection device Type 1 ( Class B), 4 Mode , connected between each phase to neutral & neutral to earth.Impulse Current Iimp 40KA per Phase ( 10/ 350µs) . SPD with 100A 4P Control MCB/ MCCB all necessary accessories and wire connections with each busbar
Supplying, fixing, testing & commissioning of capacitor Panel-1, 2 & 3 as described below.
Capacitor Panel-1, 2 & 3 (200 kVAR) Capacitor Panel (Indoor use located at Service Building on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry). INCOMER 1 Nos. 200 A TP+NL MCCB , 25kA METERING & INDICATION . (i) 1 set of phase indicating lamps (ii) 1 No. Microprocessor APFC controller/Relay shall continuously monitor all three phases and LCD displays for various Electrical Parameters like voltage, input current, capacitive current, KVA demand,KW, Power Factor, self diagnostic error code indication with printout facility of the above with RS 232 C port. Controller should mounted on the front side of the panel. BUS-BAR 1 Set of 500A TPN Aluminium Bus Bar with colour coded PVC Sleeves OUTGOINGS (i) 2 Nos.of 100A TP MCCB with suitable AC -3 duty contactor (ii) 2 Nos.of 63A TP MCB with suitable AC -3 duty contactor (iii) 4 Nos.of 40A TP MCCB with suitable AC -3 duty contactor (iv) 2 Nos. 50 KVAR capacitor Bank each with 7% harmonic & discharge resistor suitable capacity to carry expected current continuosly. (v) 2 Nos. 25 KVAR capacitor Bank each with 7% harmonic & discharge resistor suitable capacity to carry expected current continuosly. (vi) 4 Nos. 12.5 KVAR capacitor Bank each with 7% harmonic & discharge resistor suitable capacity to carry expected current continuosly.
Note:The capacitor panel shall also stipulate the following (i) All the capacitors shall be suitable for 525 V (ii) Necessary control and firing card with proper wiring and lugs of the required rating to be provided. (iii) Heavy duty exhaust fans to be provided for cooling (iv) LED indication for number of capacitor banks ‘ON & Power Factor lagging or leading. (v) The APFC shall be protected from following * over-voltage & voltage unbalance * Over temperature-system should be in standby mode and automatically restart after above condition restored. * Total Harmonic Distortion
Supplying, fixing, testing & commissioning of MDB-1 (FOR NON-ESSENTIAL) as described below. MDB-1 BLOCK-A (FOR NON-ESSENTIAL SUPPLY) (Indoor use located at Ground floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
INCOMER 1 Nos.200 A TP+NL MCCB built in thermal type (adjustable O/L, adjustable S/C) of fault breaking capacity 25 kA (ics=icu=100%) upto 415 manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended upto date. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs of suitable rating, Class-1.0 and MFM True RMS type digital with min. features of measurements covering A,V,Hz, PF, kW, kVA, kVAR, kWH, kVAH, kVARH, RS-485 Port, LCD display with class-1.0 accuracy for all incomer feeder. Refer to Cat no. - Trinity-NF29. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" , Tripped due to earth fault on each incomer and outgoing MCCB TVSS AND BUS BARS 300 Amps TP+N, 25kA, 500volts grade busbar chamber of suitable length with Aluminium busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. 1 No Surge protection device Type 2 ( Class C), 4 Mode , Connected Between each phase to neutral & neutral to earth .Nominal discharge Current ( 8/20µs) 40KA Per phase.SPD with 63A 4P Control MCB including all necessary accessories. OUTGOINGS 1 Nos.125A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended.
4 Nos.100A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. 1 Nos. 63 A TP+NL MCB . 1 Nos. 40 A TP+NL MCB .
Supplying, fixing, testing & commissioning of MDB-2 BLOCK-B (FOR NON-ESSENTIAL) as described below. MDB-2 BLOCK-B (FOR NON-ESSENTIAL SUPPLY) (Indoor use located at Ground floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
INCOMER 1 Nos.315 A TP+NL MCCB built in thermal type (adjustable O/L, adjustable S/C) of fault breaking capacity 25 kA (ics=icu=100%) upto 415 manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended upto date. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs of suitable rating, Class-1.0 and MFM True RMS type digital with min. features of measurements covering A,V,Hz, PF, kW, kVA, kVAR, kWH, kVAH, kVARH, RS-485 Port, LCD display with class-1.0 accuracy for all incomer feeder. Refer to Cat no. - Trinity-NF29. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" , Tripped due to earth fault on each incomer and outgoing MCCB TVSS AND BUS BARS 500 Amps TP+N, 35kA, 500volts grade busbar chamber of suitable length with Aluminium busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. 1 No Surge protection device Type 2 ( Class C), 4 Mode , Connected Between each phase to neutral & neutral to earth .Nominal discharge Current ( 8/20µs) 40KA Per phase.SPD with 63A 4P Control MCB including all necessary accessories. OUTGOINGS 3 Nos.125A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended.
4 Nos.100A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. 1 Nos. 40 A TP+NL MCB.
Supplying, fixing, testing & commissioning of MDB-3 BLOCK-C (FOR NON-ESSENTIAL) as described below. MDB-3 BLOCK-C (FOR NON-ESSENTIAL SUPPLY) (Indoor use located at Ground floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
INCOMER 1 Nos.200 A TP+NL MCCB built in thermal type (adjustable O/L, adjustable S/C) of fault breaking capacity 25 kA (ics=icu=100%) upto 415 manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended upto date. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs of suitable rating, Class-1.0 and MFM True RMS type digital with min. features of measurements covering A,V,Hz, PF, kW, kVA, kVAR, kWH, kVAH, kVARH, RS-485 Port, LCD display with class-1.0 accuracy for all incomer feeder. Refer to Cat no. - Trinity-NF29. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" , Tripped due to earth fault on each incomer and outgoing MCCB TVSS AND BUS BARS 300 Amps TP+N, 25kA, 500volts grade busbar chamber of suitable length with Aluminium busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar.. 1 No Surge protection device Type 2 ( Class C), 4 Mode , Connected Between each phase to neutral & neutral to earth .Nominal discharge Current ( 8/20µs) 40KA Per phase.SPD with 63A 4P Control MCB including all necessary accessories.
OUTGOINGS 4 Nos.100A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. 1 Nos.63A TP+NL MCB. 1 Nos. 40 A TP+NL MCB.
Supplying, fixing, testing & commissioning of MDB-4 BLOCK-D (FOR NON-ESSENTIAL) as described below. MDB-4 BLOCK-D (FOR NON-ESSENTIAL SUPPLY) (Indoor use located at Ground floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
INCOMER 1 Nos.200 A TP+NL MCCB built in thermal type (adjustable O/L, adjustable S/C) of fault breaking capacity 25 kA (ics=icu=100%) upto 415 manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended upto date. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs of suitable rating, Class-1.0 and MFM True RMS type digital with min. features of measurements covering A,V,Hz, PF, kW, kVA, kVAR, kWH, kVAH, kVARH, RS-485 Port, LCD display with class-1.0 accuracy for all incomer feeder. Refer to Cat no. - Trinity-NF29. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" , Tripped due to earth fault on each incomer and outgoing MCCB TVSS AND BUS BARS 300 Amps TP+N, 25kA, 500volts grade busbar chamber of suitable length with Aluminium busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. 1 No Surge protection device Type 2 ( Class C), 4 Mode , Connected Between each phase to neutral & neutral to earth .Nominal discharge Current ( 8/20µs) 40KA Per phase.SPD with 63A 4P Control MCB including all necessary accessories. OUTGOINGS 5 Nos.100A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended.
1 Nos. 63A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 16KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. 1 Nos. 40 A TP+NL MCB.
Supplying, fixing, testing & commissioning of MDB-5 BLOCK-E (FOR NON-ESSENTIAL) as described below. MDB-5 BLOCK-E (FOR NON-ESSENTIAL SUPPLY) (Indoor use located at Ground floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
INCOMER 1 Nos.250 A TP+NL MCCB built in thermal type (adjustable O/L, adjustable S/C) of fault breaking capacity 25 kA (ics=icu=100%) upto 415 manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended upto date. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs of suitable rating, Class-1.0 and MFM True RMS type digital with min. features of measurements covering A,V,Hz, PF, kW, kVA, kVAR, kWH, kVAH, kVARH, RS-485 Port, LCD display with class-1.0 accuracy for all incomer feeder. Refer to Cat no. - Trinity-NF29. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" , Tripped due to earth fault on each incomer and outgoing MCCB TVSS AND BUS BARS 400 Amps TP+N, 25kA, 500volts grade busbar chamber of suitable length with Aluminium busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. 1 No Surge protection device Type 2 ( Class C), 4 Mode , Connected Between each phase to neutral & neutral to earth .Nominal discharge Current ( 8/20µs) 40KA Per phase.SPD with 63A 4P Control MCB including all necessary accessories. OUTGOINGS 5 Nos.125A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended.
1 Nos.100A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. 1 Nos.63A TP+NL MCB. 1 Nos. 40 A TP+NL MCB.
Supplying, fixing, testing & commissioning MDB-1 BLOCK-A (FOR ESSENTIAL SUPPLY) as described below. MDB-1 BLOCK-A (FOR ESSENTIAL SUPPLY) (Indoor use located at Ground floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
INCOMER 1 Nos.250 A TP+NL MCCB built in thermal type (adjustable O/L, adjustable S/C) of fault breaking capacity 25 kA (ics=icu=100%) upto 415 manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended upto date. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs of suitable rating, Class-1.0 and MFM True RMS type digital with min. features of measurements covering A,V,Hz, PF, kW, kVA, kVAR, kWH, kVAH, kVARH, RS-485 Port, LCD display with class-1.0 accuracy for all incomer feeder. Refer to Cat no. - Trinity-NF29. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" , Tripped due to earth fault on each incomer and outgoing MCCB TVSS AND BUS BARS 400 Amps TP+N, 35kA, 500volts grade busbar chamber of suitable length with Aluminium busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. 1 No Surge protection device Type 2 ( Class C), 4 Mode , Connected Between each phase to neutral & neutral to earth .Nominal discharge Current ( 8/20µs) 40KA Per phase.SPD with 63A 4P Control MCB including all necessary accessories. OUTGOINGS 1 Nos.160A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended.
5 Nos.100A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. 1 Nos.63A TP+NL MCB.
Supplying, fixing, testing & commissioning of MDB-2 BLOCK-B (FOR ESSENTIAL SUPPLY) as described below. MDB-2 BLOCK-B (FOR ESSENTIAL SUPPLY) (Indoor use located at Ground floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
INCOMER 1 Nos.315 A TP+NL , 35kA, MCCB built in thermal type (adjustable O/L, adjustable S/C) of fault breaking capacity 25 kA (ics=icu=100%) upto 415 manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended upto date. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs of suitable rating, Class-1.0 and MFM True RMS type digital with min. features of measurements covering A,V,Hz, PF, kW, kVA, kVAR, kWH, kVAH, kVARH, RS-485 Port, LCD display with class-1.0 accuracy for all incomer feeder. Refer to Cat no. - Trinity-NF29. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" , Tripped due to earth fault on each incomer and outgoing MCCB TVSS AND BUS BARS 500 Amps TP+N, 35kA, 500volts grade busbar chamber of suitable length with Aluminium busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. 1 No Surge protection device Type 2 ( Class C), 4 Mode , Connected Between each phase to neutral & neutral to earth .Nominal discharge Current ( 8/20µs) 40KA Per phase.SPD with 63A 4P Control MCB including all necessary accessories. OUTGOINGS 3 Nos.160A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended.
1 Nos.125A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. 3 Nos.100A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. 1 Nos.63A TP+NL MCB.
Supplying, fixing, testing & commissioning of MDB-3 BLOCK-C (FOR ESSENTIAL SUPPLY) as described below. MDB-3 BLOCK-C (FOR ESSENTIAL SUPPLY) (Indoor use located at Ground floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
INCOMER 1 Nos. 315 A TP+NL MCCB built in thermal type (adjustable O/L, adjustable S/C) of fault breaking capacity 25 kA (ics=icu=100%) upto 415 manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended upto date. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs of suitable rating, Class-1.0 and MFM True RMS type digital with min. features of measurements covering A,V,Hz, PF, kW, kVA, kVAR, kWH, kVAH, kVARH, RS-485 Port, LCD display with class-1.0 accuracy for all incomer feeder. Refer to Cat no. - Trinity-NF29. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" , Tripped due to earth fault on each incomer and outgoing MCCB TVSS AND BUS BARS 400 Amps TP+N, 25kA, 500volts grade busbar chamber of suitable length with Aluminium busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. 1 No Surge protection device Type 3 ( Class C), 4 Mode , Connected Between each phase to neutral & neutral to earth .Nominal discharge Current ( 8/20µs) 40KA Per phase.SPD with 63A 4P Control MCB including all necessary accessories. OUTGOINGS 2 Nos.125A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended.
5 Nos.100A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. 1 Nos.63A TP+NL MCB
Supplying, fixing, testing & commissioning of MDB-4 BLOCK-D (FOR ESSENTIAL SUPPLY) as described below. MDB-4 BLOCK-D (FOR ESSENTIAL SUPPLY) (Indoor use located at Ground floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
INCOMER 1 Nos.315 A TP+NL MCCB built in thermal type (adjustable O/L, adjustable S/C) of fault breaking capacity 25 kA (ics=icu=100%) upto 415 manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended upto date. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs of suitable rating, Class-1.0 and MFM True RMS type digital with min. features of measurements covering A,V,Hz, PF, kW, kVA, kVAR, kWH, kVAH, kVARH, RS-485 Port, LCD display with class-1.0 accuracy for all incomer feeder. Refer to Cat no. - Trinity-NF29. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" , Tripped due to earth fault on each incomer and outgoing MCCB TVSS AND BUS BARS 500 Amps TP+N, 35kA, 500volts grade busbar chamber of suitable length with Aluminium busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. 1 No Surge protection device Type 2 ( Class C), 4 Mode , Connected Between each phase to neutral & neutral to earth .Nominal discharge Current ( 8/20µs) 40KA Per phase.SPD with 63A 4P Control MCB including all necessary accessories. OUTGOINGS 3 Nos.200A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended.
5 Nos.100A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. 1 Nos.63A TP+NL MCB
Supplying, fixing, testing & commissioning of MDB-5 BLOCK-E (FOR ESSENTIAL SUPPLY) as described below. MDB-5 BLOCK-E (FOR ESSENTIAL SUPPLY) (Indoor use located at Ground floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
INCOMER 1 Nos. 200 A TP+NL MCCB built in thermal type (adjustable O/L, adjustable S/C) of fault breaking capacity 25 kA (ics=icu=100%) upto 415 manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended upto date. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs of suitable rating, Class-1.0 and MFM True RMS type digital with min. features of measurements covering A,V,Hz, PF, kW, kVA, kVAR, kWH, kVAH, kVARH, RS-485 Port, LCD display with class-1.0 accuracy for all incomer feeder. Refer to Cat no. - Trinity-NF29. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" , Tripped due to earth fault on each incomer and outgoing MCCB TVSS AND BUS BARS 300 Amps TP+N, 25kA, 500volts grade busbar chamber of suitable length with Aluminium busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. 1 No Surge protection device Type 2 ( Class C), 4 Mode , Connected Between each phase to neutral & neutral to earth .Nominal discharge Current ( 8/20µs) 40KA Per phase.SPD with 63A 4P Control MCB including all necessary accessories. OUTGOINGS 1 Nos.125A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended.
5 Nos.100A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. 1 Nos.63A TP+NL MCB
Supplying, fixing, testing & commissioning of PANEL-8 (FOR OTHER ANCILLIARY NON-ESSENTIAL PANEL) as described below. MDB-8 (FOR ANCILLIARY BUILDING NON-ESSENTIAL PANEL) (Indoor use located at Ground floor on a plain civil foundation with cable entry from top or Cable trench with bottom & top both cable entry).
INCOMER 1 Nos. 400A TP+NL MCCB built in microprocessor based release (adjustable O/L,S/C&E/F) of fault breaking capacity 35KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. METERING, INDICATOR AND RELAYs Provide 3 Nos. Resin cast CTs of suitable rating, Class-1.0 and MFM True RMS type digital with min. features of measurements covering A,V,Hz, PF, kW, kVA, kVAR, kWH, kVAH, kVARH, RS-485 Port, LCD display with class-1.0 accuracy for all incomer feeder. Refer to Cat no. - Trinity-NF29. E-Series R,Y,B phase indication lamps with 4Nos. SP HRC fuses as per fault requirement for each Incomer. Provide 3Nos indicating lamps for status indication "ON","OFF" , Tripped due to earth fault on each incomer and outgoing MCCB TVSS AND BUS BARS 500 Amps TP+N, 35kA, 500volts grade busbar chamber of suitable length with Aluminium busbars mount on SMC supports. All interconnections shall be as follows; a). Upto 63A, FRLS PVC insulated copper flexible colour coded wires b). 64Amp to 200Amp Copper Bus-bars and c). 201Amp and above Aluminium Bus-bars , current density of bus-bars shall not be less than 1Amps/sq.mm for Aluminium and 2Amps/sq.mm for copper cross sectional area of Bus Bar. 1 No Surge protection device Type 2 ( Class C), 4 Mode , Connected Between each phase to neutral & neutral to earth .Nominal discharge Current ( 8/20µs) 40KA Per phase.SPD with 63A 4P Control MCB including all necessary accessories.
OUTGOINGS 2 Nos. 160A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C & adjustable E/F) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended. 3Nos.125A TP+NL MCCB built in thermal magnetic based release (adjustable O/L, adjustable S/C) of fault breaking capacity 25KA (Ics=Icu=100%) upto 415V manually operated with extended rotary handle with castle lock for door interlock with Phase spreader & Phase Barriers at both sides. MCCB shall conforming to IS-1397-2 1993 as amended 2Nos.63A TP+NL MCB 1Nos.40A TP+NL MCB
Supplying, fixing, testing & commissioning of FEEDER PANEL-1 OUTDOOR TYPE (FOR ANCILLARY BUILDING ) as described below. FEEDER PANEL-1 (FOR ANCILLARY BUILDING ) Outdoor use located in external area on Rock or soft Soil as case may be with bottom cable entry. INCOMER 1 No. 125A TP+NL MCCB. METERING & INDICATION 1 set of R,Y,B phase indicating lamps BUS-BAR 1 Set of 200A TPN Aluminium Bus Bar with colour coded PVC Sleeves. OUTGOINGS 3 Nos. 63 A TPN MCB. 2 Nos. 40A TPN MCB. 2 Nos. 32A TPN MCB. 2 Nos. 32A DP MCB. 9 Nos. 25A DP MCB.
Supplying, fixing, testing & commissioning of FEEDER PANEL-2 OUTDOOR TYPE (FOR ANCILLARY BUILDING ) as described blow. FEEDER PANEL-2 (FOR ANCILLARY BUILDING ) Outdoor use located in external area on Rock or soft Soil as case may be with bottom cable entry. INCOMER 1 No. 160 A TPN MCCB. METERING & INDICATION 1 set of R,Y,B phase indicating lamps BUS-BAR 1 Set of 250A TPN Aluminium Bus Bar with colour coded PVC Sleeves. OUTGOINGS 3 Nos. 63 A TPN MCB. 2 Nos. 40A TPN MCB. 2 Nos. 32A TPN MCB. 6 Nos. 32A DP MCB. 4 Nos. 25A DP MCB.
Supplying, fixing, testing & commissioning of FEEDER PANEL-3 OUTDOOR TYPE (FOR ANCILLARY BUILDING ) as described below. FEEDER PANEL-3 Outdoor use located in external area on Rock or soft Soil as case may be with bottom cable entry. INCOMER 1 No. 125 A TPN MCCB. METERING & INDICATION 1 set of R,Y,B phase indicating lamps BUS-BAR 1 Set of 200A TPN Aluminium Bus Bar with colour coded PVC Sleeves. OUTGOINGS 3 Nos. 63 A TPN MCB. 2 Nos. 40A TPN MCB. 3 Nos. 32A DP MCB. 7 Nos. 25A DP MCB.
Supplying, fixing, testing & commissioning of FEEDER PANEL-4 OUTDOOR TYPE (FOR ANCILLARY BUILDING ) as described below. FEEDER PANEL-4 Outdoor use located in external area on Rock or soft Soil as case may be with bottom cable entry. INCOMER 1 No. 63A TPN MCB. METERING & INDICATION 1 set of R,Y,B phase indicating lamps BUS-BAR 1 Set of 100A TPN Aluminium Bus Bar with colour coded PVC Sleeves. OUTGOINGS 2 Nos. 32A TPN MCB. 9 Nos. 25A DP MCB.
Supplying, fixing, testing & commissioning of MDB-9 OUTDOOR TYPE (FOR EXTERNAL LIGHTING) as described below. MDB-9 Outdoor use located in external area on Rock or soft Soil as case may be with bottom cable entry. INCOMER 1 No. 100A TPN MCCB. METERING & INDICATION 1 set of R,Y,B phase indicating lamps BUS-BAR 1 Set of 250A TPN Aluminium Bus Bar with colour coded PVC Sleeves. OUTGOINGS 1 Nos. 63 A TPN MCB. 1 Nos. 40A TPN MCB. 5 Nos. 32A TPN MCB.
Construction of brick masonry valve pit of size 1.2 x 1.2 x 1.2 m (internal dimension of chamber) with brick work in cement mortar 1:4 including plastering internally and pointing externally as the work proceeds complete with MS sheet cover 3.15mm thick and angle iron frame 40mmX40mmX6mm with handle, locking arangement and painting with two coats of synthetic enamelled paint over a coat of red oxide primer on steel surfaces including earth work & excavation in any type of soil, disposal of surplus spoil not exceeding 50m concrete etc all as specified and shown on drawing.
Description all as per Item No 129 above but of size 900mm x 900mm x 1050mm.
M&L for Platform brick masonary with surface finshing using extra cement for the installation of transformer of size 3000x2500x1200mm complete with chain link fencing and gate all shown in drawing No. CEPZ/TD/350/08, complete all as specified and directed.
(BOQ Schedule 'A' Part-XXII). EXTERNAL WATER SUPPLY
Supply, laying , jointing and testing of DI (Ductile iron) pipe 80 mm bore spigot and socketed type of class K-9 conforming to IS 8329 of 2000 with inside surface of centrifugally cement mortar lined laid in trenches/ on ground suitable for & including rubber gasket (Push-on) joint and jointing material complete all as specified and diorected.
Material & labour for fabrication of header made out of heavy duty MS pipe 250 mm dia not less than 12mm thick and not less than 10mtr long duty painted and welded on both sides with suitable holes-07 Nos of siges one 150mm dia (incoming) and 6 Nos (outgoing) (4 Nos 80mm dia, 1 Nos 50mm dia and one Nos 40mm dia). The job includes welding 06 No 80mm, 50mm and 40mm dia MS pipe 600 mm long 'heavy grade at one end and other end duly welded with MS flange having thickness not less than 10mm, duly holes drilled matching with the holes of sluice & Gate valve flange 80mm, 50mm and threaded for 40mm dia and including 6 No MS pipe piece 600 mm ling 80mm, 50mm and threaded for 40mm dia heavy grade welded with MS flange having thickness not less than 10mm duly holes drilled matching with the holes of sluice & gate valve flange 80mm, 50mm and threaded for 40mm dia complete all as directed by Engr-in-charge.
M&L for providing & fixing in position 25mm dia lawn hydrants consisting of 25mm dia Ball valve, GI nipple and threaded hose reeiver complete all as specfied and as directed by Engr-in-charge
Constructions of Brick masonary valve pit of size 90x90x90 Cm (internal dimension of chamber ) with earth work in ant type of soil, PCC M-10 type C-2 as in foundation, bricks work in CM 1:6, 23 cm thick, 15 mm thick plaster in cement mortar 1:4 internally and externally flush pointed in same mortar as the work proceeds. lfooring shall be 40mm thick in PCC M-15 (Nominal Mix) laid over 75mm thick hard core. top cover shall be made out of MS sheet 3.15mm thick fixed in angle iron frame made out of angle size 40x40x6mm with two number of hinges on one side and locking arranagement at other side with 50mm pad lock complete including painting with 2 coat of synthetics paint over one coat of red oxide primer complete all as specified and as shown on drawing all as specified and as directed.
Constructions of Brick masonary valve pit of size 120x120x120 Cm (internal dimension of chamber ) with earth work in ant type of soil, PCC M-10 type C-2 as in foundation, bricks work in CM 1:6, 23 cm thick, 15 mm thick plaster in cement mortar 1:4 internally and externally flush pointed in same mortar as the work proceeds. lfooring shall be 40mm thick in PCC M-15 (Nominal Mix) laid over 75mm thick hard core. top cover shall be made out of MS sheet 3.15mm thick fixed in angle iron frame made out of angle size 40x40x6mm with two number of hinges on one side and locking arranagement at other side with 50mm pad lock complete including painting with 2 coat of synthetics paint over one coat of red oxide primer complete all as specified and as shown on drawing all as specified and as directed.
Supply, installation, testing & commissioning of factory assembled compact self contained fix speed hydropneumatic system comprising of following :- (a) Vertical, Non-self Priming, multistage, inline, centrifugal clear water pumps with cast iron Pump housing, S.S 304 impeller and SS-316 shaft, C.I Base & head, TEFC motor, “F” insulation class, IP55 enclosure class, 2900 RM (With mechanical seal) Vendor to submit performance curves and technical catelogue of the proposed model for review and information. (b) Food Graded Pre-charged diaphragm pressure vessel with interchangeable membrane, charging connection, connected to outlet header with necessary flanges, gaskets, isolating valves, nuts / bolts etc. complete (size of pressure vessel shall be of suitable capacity or as per manufacturer calculation / recommendation) with electrical panel. (c) Panel mounted microprocessor PID controller with pressure sensor transmitter (one dedicated to each pump) minimum two lined LCD display, diodes to indicate pump ready, pump running and fault and capable to communicate with other controllers following MODBUS-RTU or BACNET Class -2 protocol through RS 485 port. System should be capable to compensate for frictional losses at lower flows. All alarms should be displayed in the controller. System should be equipped with dry running protection. (d) Set of accessories such as pressure switches, pressure transducers, valve (butterfly / valve, NRV of PN 16 / PN 10.00 pressure rating) Vibration isolator, GI “heavy class’ suction and delivery header & interconnection piping, level controller, pressure gauge inter connecting power and control cabling etc. complete with vibration eliminators of required quantity. Flow rate : 2 LPS each Head : 35 Mtr, E.Load 2 KW or as per manufacture required for : domestic water transfer for D-block.
Supply and fix CI Automatic air release valve 50mm dia suitable for domestic water with 50mm gun metal stop valve complete all as specified and as directed by Engr-in-charge.
Supply and fix Strainer Y type conforming to IS, of size 50mm (2") dia complete all as specified and as directed by Engr-in-charge.
Supply and fixing, testing & commission of size 50mm dia resilent rubber lined single arch vibration eliminators suitable for raw water up to 45 C temperature, working pressure 10.0 Kg/cm2 and test pressure 20 Kg/cm2
Supply laying jointing and testing of DI (Ductile iron) pipe of 150 mm dia spigot and socketed type of class K-9 confirming to IS 8329 of 2000 with inside surface of centrifugally cementy mortar lined, laid in trenches/ on ground suitable for & including rubber gasket (Push-on) joint and jointing material complete all as specified and directed.
M&L for cutting of roads for laying of pipe of any size and type complete all as specified and directed. Repair to road cutting by providing soling with broken boulders or quarried stone and applying cold emulsion mixed with aggregate as per manufacter's instructions including necessary compaction by rolling etc match complete all as specified and directed.
(BOQ Schedule 'A' Part-XXIII). LIGHTENING PROTECTION
M&L of Earthing comlete with Galvanised steel earth plate electrode 60 cmx60 cm x 6.00mm thick buried directly in ground to a depth not less than 2.25 mtr below normal ground level with top edge of earth plate at a depth not less than 1.50 mtr below ground level, earth plate surrounded by 15 cm thick packed layer of charcoal ad common salt alternatively upto 90 cm and connected with and including GI strip of size 32x6 mm by means of bolts, nuts, check nuts and washers of GI 40 mm bore GI pipe light grade from earth plate up to testing point for protection of strip and 20 mm bore GI pipe medium grade with wire mesh and funnel for watering including necessary excavation and earth work PCC chamber (1:3:6) type c-2 with RCC cover complete all as shown in electrical plate No 3 of MES schedule Part-I of SSR Part-I (2009) complete all as specified and directed by Engr-in-charge. NOTE:- (i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B, 80 mm thick reinforcement with 8mm TOR steel @ 100 c/c in lieu of CI cover and the rate includes in the unit rate of item. (ii) Earth electrode shall be protected upto test point using necessary arrangement with suitable size GI pipe and the rate includes in the unit rate of item (iii) Earth pit chamber and RCC cover shall be painted with red paint over a primer coat and the rate includes in the unit rate of item.
DG SET
Supply, installation, commissioning and testing of Diesel engine driven Water cooled generating set of capacity 200 kVA, 415 volts, BHP as per manufacture recommendation, AC supply, 50 Hz, 3 phase 4 wire, 0.8 PF at NTP, speed 1500 RPM at Yol mounted on common base frame with flexible coupling and meeting the requirement of IS-4722/BIS specification with CPCB 4 + standard DG set has RECD (Retrofit emission control device), acoustic enclosures fabricated out of CRCA sheets as per manufacture recommendation. Sound proofing of enclosures is done with high quality foam conforming to IS-8183 for 75 dBT 01 metre complete including PCC foundation in all respect as per norms of OEM.
Technical Specification of DG Set - Electric Generating set placing the engine and A.C. Generator on M.S. frame duly bolted, coupled, aligned, tested and housed within the acoustic enclosure complete with the followings: DIESEL ENGINE: Water cooled diesel engine of adequate capacity tp produce power otput of 200KVA at 1500 RPM generally in accordance with latest BIS/IS specification, 12 volts self starting including maintenance free battery of suitable capacity, charging dynamo/ alternator, air cleaner, diesel/ oil filters, complete in all respect. The engine shall be capable of taking 10% over load for one hour for every 12 hours running confirming to the environment (PROTECTION ACT 1986) (29 pf 1986) and as amended vide Gazette of India Notifications Part-II sections-III Sub Section (I) dated 12 Jul 2004. A.C. Generator – Brush less type, Synchronous, A.C. Generators continuously rated for 415 Volts, 3 Phase, 4 Wire, 50 HZ, 1 power factor (lagging) at 1500 RPM, 4 Pole, screen protected, drip proof, horizontal foot-mounted type, self-excited, selfregulated with static excitation system, Class ‘H’ insulation. The Alternator is capable of developing rated output &able to take 10% overload for one hour at every 12 hrs of operation.
ACCESSORIES: Base Frame : The Diesel Engine and the A. C. Generator will be mounted on a suitable base frame of sturdy to minimize vibration and ensure easy maintenance. Fuel Tank : Daily service fuel tank of sheet metal of suitable capacity complete with drain valve, air vents inlet and outlet connection. Batteries : Battery (Dry and uncharged) of suitable Amp-Hr capacity along with leads for connection. Manually operated Standard Alternator Control Panel fabricated out of sheet steel angle, iron, structure, acid treated for anti-corrosion, floor mounting, cubicle pattern, powder coated dust and, vermin proof, complete with internal wiring and with the followings: • Powder coated control panel manufactured with CRCA sheet provides: • MCCB of suitable rating with short circuit protection • Controller which displays voltage, current, KW, PF, Frequency, KWh. • Indicating lamps for “Load On” and “Set Running” • Current transformers of suitable ratings • Copper Cables of suitable capacity with incoming and Outgoing terminations • Control fuses duly wired and ferruled Technical Specification of Acoustic Enclosure Salient Features: • Approved by ARAI, the nodal agency of CPCB 4 + standards • Compact, modular construction and sleek design with low noise level 75 dBA, at a distance of 1 Meter from Canopy in free field conditions. • Soundproof, weather-proof and environment friendly silent set. • Ready-to-use silent DG Set, which eliminates need of foundation or grouting. • Single bearing generator with Anti vibration mounting ensures minimal vibration. • Steel outer construction with 1.6mm CRCA sheet with heavy-duty fabricated base frame and inbuilt fuel tank. • Attenuators are placed in the hot air outlet and cooling air inlet. • Residential type exhaust silencer is mounted on the enclosure. • Illumination arrangement inside the canopy.
Warranty –(For DG set) : Warranty is for 5 years from the date of completion subject to the use of genuine parts and recommended lube oil and coolant maintenance by authorised person/dealer only. Standard Manual Control panel Illumination Box
Supply, installation, commissioning and testing of Diesel engine driven Water cooled generating set of capacity 500 kVA, 415 volts, BHP as per manufacture recommendation, AC supply, 50 Hz, 3 phase 4 wire, 0.8 PF at NTP, speed 1500 RPM at Yol mounted on common base frame with flexible coupling and meeting the requirement of IS-4722/BIS specification with CPCB 4 + standards, DG set has RECD (Retrofit emission control device), acoustic enclosures fabricated out of CRCA sheets as per manufacture recommendation. Sound proofing of enclosures is done with high quality foam conforming to IS-8183 for 75 dBT 01 metre complete including PCC foundation in all respect as per norms of OEM.
Technical Specification of DG Set - Electric Generating set placing the engine and A.C. Generator on M.S. frame duly bolted, coupled, aligned, tested and housed within the acoustic enclosure complete with the followings: DIESEL ENGINE: Water cooled diesel engine of adequate capacity to produce power output of 500 KVA at 1500 RPM generally in accordance with latest BIS/IS specification, 12 volts self starting including maintenance free battery of suitable capacity, charging dynamo/ alternator, air cleaner, diesel/ oil filters, complete in all respect. The engine shall be capable of taking 10% over load for one hour for every 12 hours running confirming to the environment (PROTECTION ACT 1986) (29 pf 1986) and as amended vide Gazette of India Notifications Part-II sections-III Sub Section (I) dated 12 Jul 2004. A.C. Generator – Brush less type, Synchronous, A.C. Generators continuously rated for 415 Volts, 3 Phase, 4 Wire, 50 HZ, 0.8 power factor (lagging) at 1500 RPM, 4 Pole, screen protected, drip proof, horizontal foot-mounted type, selfexcited, self-regulated with static excitation system, Class ‘H’ insulation. The Alternator is capable of developing rated output &able to take 10% overload for one hour at every 12 hrs of operation. ACCESSORIES: Base Frame : The Diesel Engine and the A. C. Generator will be mounted on a suitable base frame of sturdy to minimize vibration and ensure easy maintenance. Fuel Tank : Daily service fuel tank of sheet metal of suitable capacity complete with drain valve, air vents inlet and outlet connection. Batteries : Battery (Dry and uncharged) of suitable Amp-Hr capacity along with leads for connection.
Control Panel: Manually operated Standard Alternator Control Panel fabricated out of sheet steel angle, iron, structure, acid treated for anti-corrosion, floor mounting, cubicle pattern, powder coated dust and, vermin proof, complete with internal wiring and with the followings: • Powder coated control panel manufactured with CRCA sheet provides: • MCCB of suitable rating with short circuit protection • Controller which displays voltage, current, KW, PF, Frequency, KWh. • Indicating lamps for “Load On” and “Set Running” • Current transformers of suitable ratings • Copper Cables of suitable capacity with incoming and Outgoing terminations • Control fuses duly wired and ferruled Technical Specification of Acoustic Enclosure • Approved by ARAI, the nodal agency of CPCB 4 + standards • Compact, modular construction and sleek design with low noise level 75 dBA, at a distance of 1 Meter from Canopy in free field conditions. • Soundproof, weather-proof and environment friendly silent set. • Ready-to-use silent DG Set, which eliminates need of foundation or grouting. • Single bearing generator with Anti vibration mounting ensures minimal vibration. • Steel outer construction with 1.6mm CRCA sheet with heavy-duty fabricated base frame and inbuilt fuel tank. • Attenuators are placed in the hot air outlet and cooling air inlet. • Residential type exhaust silencer is mounted on the enclosure. • Illumination arrangement inside the canopy. Terms & Conditions: Warranty –(For DG set) : Warranty is for 5 years from date of supply or the completion of 5000 hrs. Which earlier, subject to the use of genuine parts and recommended lube oil and coolant maintenance by authorised person/dealer only. Standard Manual Control panel Illumination Box
M & L for Earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6.00mm thick buried directly in ground to a depth not less than 2.25 mtr below normal ground level with top edge of earth plate at a depth not less than 1.50 mtr below ground level, earth plate surrounded by 15 cm thick packed layer of charcoal and common salt alternatively upto 90 cm and connected with and including GI strip of size 32x6 mm by means of bolts, nuts, check nuts and washers of GI. 40 mm bore GI pipe light grade from earth plate up to testing point for protection of strip and 20 mm bore GI pipe medium grade with wire mesh and funnel for watering including necessary excavation and earth work PCC chamber (1:3:6) type C-2 with RCC cover complete all as shown in electrical plate No 3 of MES schedule Part I of SSR Part I (2009) complete all as specified. NOTES:- (i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B, 80 mm thick reinforcement with 8 mm TOR steel @ 100 c/c in lieu of CI cover and the rate includes in the unit rate of item (ii) Earth electrode shall be protected upto test point using necessary arrangement with suitable size GI pipe and the rate includes in the unit rate of item (iii) Earth pit chamber and RCC cover shall be painted with red paint over a primer coat and the rate includes in the unit rate of item.
(BOQ Schedule 'A' Part-XXIV). .SUMMER COOLING APPLIANCES
Supply, installation, connecting, testing and commisxsioning of voltage stabilizer for automatic operation single phase naturally air cooled indoor type & designe for input variation between 170V to 250V with output voltage stabilizd 230V with accuracy of +2.5% and of capacity 1.0 KVA specified and directed.
Supply and fix Refrigerator, electric driven (single phase) capacity 260 Ltr BEE, 5 star rated smart inverter complete as per specified and directed by Engr-in-charge.
Supply and fix Refrigerator, electric driven (single phase) capacity 190 Ltr BEE, 5 star rated smart inverter complete as per specified and directed by Engr-in-charge.
S&F electric storage water heater Geysers, 25 ltr capacity, 5 star rating including proper fixing with suitable nuts and bolts and supply with proper PVC connection for incoming and outgoing water connection through geyser complete all as specified and directed.
(BOQ Schedule 'A' Part-XXVI). . AIR CONDITION PLANT (HVAC) (A) INTERNAL
DESCRIPTION CFM TR STATIC MM KW TYPE BASEMENT BLOCK C TFA AHU 446 2.4 30 0.37 CS AHU
DESCRIPTION CFM TR STATIC MM KW TYPE LOWER GROUND FLOOR BLOCK B TFA AHU 2080 11.2 30 1.1 CS AHU
DESCRIPTION CFM TR STATIC MM KW TYPE GROUND FLOOR BLOCK A TFA AHU 420 2.3 30 0.37 CS AHU
DESCRIPTION CFM TR STATIC MM KW TYPE BLOCK B TFA AHU 390 2.1 30 0.37 CS AHU
DESCRIPTION CFM TR STATIC MM KW TYPE BLOCK C TFA AHU 150 0.8 30 0.37 CS AHU
DESCRIPTION CFM TR STATIC MM KW TYPE TFA AHU 210 1.2 30 0.37 CS AHU
DESCRIPTION CFM TR STATIC MM KW TYPE BLOCK D TFA AHU 344 1.8 30 0.37 CS AHU
DESCRIPTION CFM TR STATIC MM KW TYPE TFA AHU 440 2.4 30 0.37 CS AHU
DESCRIPTION CFM TR STATIC MM KW TYPE BLOCK E EMERGENCY BEDS 2800 3.6 32 1.1 CS AHU
DESCRIPTION CFM TR STATIC MM KW TYPE TFA AHU 874 4.7 30 0.5 CS AHU
DESCRIPTION CFM TR STATIC MM KW TYPE FIRST FLOOR BLOCK A DELIVERY SUITE TFA AHU 1407 7.1 30 0.5 CS AHU
DESCRIPTION CFM TR STATIC MM KW TYPE TFA AHU 1632 9.2 30 0.5 CS AHU
DESCRIPTION CFM TR STATIC MM KW TYPE BLOCK B FAMILY WARD I 4 BED GYNAE 1300 1.6 30 0.5 CS AHU
DESCRIPTION CFM TR STATIC MM KW TYPE 5 BED GYNAE 1400 1.7 30 0.5 CS AHU
DESCRIPTION CFM TR STATIC MM KW TYPE 4 BED (M) 1450 1.8 30 0.5 CS AHU
DESCRIPTION CFM TR STATIC MM KW TYPE TFA AHU 1000 5.3 30 0.5 CS AHU
DESCRIPTION CFM TR STATIC MM KW TYPE TFA AHU 1050 5.6 30 0.5 CS AHU
DESCRIPTION CFM TR STATIC MM KW TYPE BLOCK C PAED. OPD TFA AHU 260 1.4 30 0.37 CS AHU
DESCRIPTION CFM TR STATIC MM KW TYPE BLOCK D FAMILY WARD II 6 BEDS (M & S) 1320 1.7 30 0.5 CS AHU
DESCRIPTION CFM TR STATIC MM KW TYPE 6 BEDS (P) 2000 2.6 30 1.1 CS AHU
DESCRIPTION CFM TR STATIC MM KW TYPE 4 BEDS (P) 1280 1.6 30 0.5 CS AHU
DESCRIPTION CFM TR STATIC MM KW TYPE TFA AHU 1180 6.4 30 0.37 CS AHU
DESCRIPTION CFM TR STATIC MM KW TYPE TFA AHU 780 4.2 30 0.37 CS AHU
DESCRIPTION CFM TR STATIC MM KW TYPE BLOCK E 6 BEDS-MEDICAL 1525 2.0 30 0.5 CS AHU
DESCRIPTION CFM TR STATIC MM KW TYPE WARD I TFA AHU 1370 7.4 30 0.5 CS AHU
DESCRIPTION CFM TR STATIC MM KW TYPE TFA SECOND FLOOR BLOCK A MEDICAL WARD II TFA AHU 190 1.0 30 0.37 CS AHU BLOCK C
OPERATION THEATRE DESCRIPTION CFM TR STATIC MM KW TYPE *PRE OT (6 rows cooling coil & 2 rows 900 1.0 30 0.50 CS AHU heating coil)
DESCRIPTION CFM TR STATIC MM KW TYPE *POST OT (6 rows cooling coil & 2 rows 900 1.5 30 0.50 CS AHU heating coil)
DESCRIPTION CFM TR STATIC MM KW TYPE STERILE ZONE (6 rows cooling coil 1655 2.7 30 0.50 CS AHU & 2 rows heating coil)
DESCRIPTION CFM TR STATIC MM KW TYPE *CLEAN ZONE (6 rows cooling coil & 2 rows 1350 4.6 30 0.10 CS AHU heating coil)
DESCRIPTION CFM TR STATIC MM KW TYPE TFA AHU (8 rows cooling coil & 3 750 4.0 28 0.37 CS AHU rows heating coil)
DESCRIPTION CFM TR STATIC MM KW TYPE BLOCK D ACUTE MED 4 BEDS 1500 1.9 30 0.5 CS AHU (6 rows cooling coil & 2 rows heating coil)
DESCRIPTION CFM TR STATIC MM KW TYPE ICU * 4 BEDS (6rows cooling coil & 2 rows 2200 2.7 32 1.1 CS AHU heating coil)
DESCRIPTION CFM TR STATIC MM KW TYPE TFA AHU (6rows cooling coil & 2 2277 12.2 35 1.5 CS AHU rows heating coil)
DESCRIPTION CFM TR STATIC MM KW TYPE TFA TFA AHU (6rows cooling coil & 2 795 4.2 30 0.5 CS AHU rows heating coil)
DESCRIPTION CFM TR STATIC MM KW TYPE TFA BLOCK E HOSPITAL ADMIN TFA AHU 320 1.7 30 0.5 CS AHU
DESCRIPTION CFM TR STATIC MM KW TYPE TFA THIRD FLOOR BLOCK B 6 BEDS-SURGICAL WARD I 1650 2.1 30 0.5 CS AHU
DESCRIPTION CFM TR STATIC MM KW TYPE TFA 6 BEDA-SURGICAL WARD I 1610 2.1 30 0.5 CS AHU
DESCRIPTION CFM TR STATIC MM KW TYPE TFA 7 BEDS-SURGICAL WARD I 1630 2.1 30 0.5 CS AHU
DESCRIPTION CFM TR STATIC MM KW TYPE TFA TFA AHU 695 3.7 30 0.5 CS AHU
DESCRIPTION CFM TR STATIC MM KW TYPE TFA TFA AHU 765 4.1 30 0.5 CS AHU
DESCRIPTION CFM TR STATIC MM KW TYPE TFA BLOCK D TFA AHU 260 1.4 30 0.5 CS AHU
(b) Exhaust Air Stream: (i) Filter sections consisting of flange type pre filter (MERV-8). Face velocity across filter should not be more than 500FPM. (ii) Heat recovery Section with heat recovery wheel. Of min efficiency 75%. (iii) Fan section with plug type SISW Backward Curved High Efficiency EC fans with efficiency complaining to IE3. EC motor should be BLDC motor. With inbuilt speed control. EC motor should be BMS compatible (iv) Volume control dampers of extruded aluminum construction in supply, return and exhaust air streams (sized for 100% volume of air). Maximum leakage rate from dampers shall be in accordance with AMCA standard 500 as indicated in table 6.2.3.3.4 of ASHRAE standard 90-1-2001. (v) Dehumidifier section comprising of molecular sieve desiccant wheel & steam regeneration arrangement. Quoted price shall also include cost of control wiring in 25mm dia MS conduit. Following motorized dampers (including actuators) shall be provided as part of AHJ’s: (i) Motorised damper for 100% fresh air (equivalent to 85% of supply air fan capacity) (ii) Motorised modulating damper for exhaust air (equivalent to exhaust air quantity mentioned for each AHU). (iii) Motorised ON/OFF damper for 100% exhaust air for smoke evacuation (equivalent to return air fan capacity).
Motorised ON/OFF damper for 100% exhaust air for smoke evacuation (equivalent to return air fan capacity). Description CFM TR KW SP POSITIVE WINDOW MINOR OT Supply Air 3070 10.4 19.3 125 Return Air 2763 Fresh Air 3070 exhaust Air 2763 POSITIVE WINDOW OT Supply Air 3700 12.6 23.3 125 Return Air 3330 Fresh Air 3700 exhaust Air 3330 AHU as described above Note: (i) All AHU’s shall be supplied with hydrophilic coating on fins. (ii) Frame-work for coils of all AHU’s shall SS-304 constructions. (iii) Motors for all blowers shall be belt-less type (direct driven) & high efficiency EFF-1 (iv) Efficiency of AHU blowers shall be >65% (v) The steam control values (ON/OFF and modulating type) shall be compatible with BMS and able to accept 4-20
FAN COIL UNITS
Supply, installing, testing and commissioning of vertical, horizontal powder coated Fan Coil Units, Blow thru type, each complete with 3 rows deep chilled water coil & one or more centrifugal fans, aluminium/ synthetic cleanable filters, primary & secondary condensate drain pans duly insulated, casing coil, piping connections through copper pipes, condensate drain connection, wiring, control wiring in conduit upto the thermostat boxes. All fan coil units shall be suitable for 220+ 6% volts, 50 cycles single phase power supply. Fan coil unit shall be of following arrangements and refrigeration capacity. All Fan Coil units shall be with 3 to 5mm wg external static pressure. The nosie level be NC 37 for all rooms.
3.0 TR nominal capacity
3.0 TR nominal capacity (3 rows cooling coil & 2 rows heating coil)
2.5 TR nominal capacity
2.5 TR nominal capacity (3 rows cooling coil & 2 rows heating coil)
2.0 TR nominal capacity
2.0 TR nominal capacity (3 rows cooling coil & 2 rows heating coil)
1.5 TR nominal capacity
1.5 TR nominal capacity (3 rows cooling coil & 2 rows heating coil)
1.0 TR nominal capacity
1.0 TR nominal capacity (3 rows cooling coil & 2 rows heating coil)
CONTROL PANEL FOR AIR HANDLING UNITS
25 amps MPCB, upto 7.5 HP DOL starter.
PRESSURIZATION FANS:LOBBY PRESSURIZARION-CFM-4500, TYPE/INSULATION CLASS-VANE/CLASS F, MOTOR HP-3
LOBBY PRESSURIZARION-CFM-4600, TYPE/INSULATION CLASS-VANE/CLASS F, MOTOR HP-3
LIFTWELL PRESSURIZATION-CFM-12000, TYPE/INSULATION CLASS-VANE/CLASS F, MOTOR HP-10
LIFTWELL PRESSURIZATION -CFM-11300, TYPE/INSULATION CLASS-VANE/CLASS F, MOTOR HP-10
COOLING/HEATING THERMOSTAT
Supply, installation, testing and commissioning of THERMOSTAT (AHU) cooling/heating. The thermostat shall be electronic room temperature controller with digital display & fan speed control, capable of providing individual space temperature control for cooling/heating application. The controller shall produce output to cooling/heating coils in response to load change in rooms. The controller shall be designed to modulate two control services such as 2 way motorized valves for chilled/hot water duty.
Supply, installation, testing and commissioning of snap acting THERMOSTAT (FCU) cooling/heating. The thermostat shall be electronic room temperature controller with digital display & fan speed control, capable of providing individual space temperature control for cooling/heating application. The controller shall produce output to cooling/heating coils in response to load change in rooms. (Including wiring from thermostat to Actuator).
25 amps MPCB, upto 7.5 HP DOL starter.
32 amps MPCB, 10/12.5 HP Star Delta Starters
Supplying, installing, testing and commissioning of Ultrasonic humidifier (For operation theatre air handling units identified below), complete with stainless steel tank with float valve, water makeup, overflow and drain connections. The transducer shall be interlocked with float switch, supplied with humidifier, and humidistat. Necessary potential free contacts shall be provided for BMS operation.
AHU NO-POSITIVE WINDOW MINOR OT, AHU CAPACITY-2550, HUMIDIFER CAPACITY-10 LPH
AHU NO-POSITIVE WINDOW OT, AHU CAPACITY-3700, HUMIDIFER CAPACITY-10 LPH
AHU NO-ICU ROOM, AHU CAPACITY-2500, HUMIDIFER CAPACITY-10 LPH
PIPING-CHILLED WATER, HOT WATER: Supply and fixing in position the following MS heavy class (C) pipes cut to required lengths and installed with all welded joints, providing and fixing in position the necessary fittings like elbows, tees and reducers, mating flanges & sockets for BAS:
200 mm dia
150 mm dia
125 mm dia
100 mm dia
80 mm dia
65 mm dia
50 mm dia
40 mm dia
32 mm dia
25 mm dia
20 mm dia
Supply, Installation, testing & commissioning of Manual Butterfly valves with matching flangeswith feasibility of changing the inner lining if wornout handles with lockage.Pressure rating - PN-16.
150 mm dia
125 mm dia
100 mm dia
80 mm dia
65 mm dia
50 mm dia
40 mm dia
32 mm dia
25 mm dia
20 mm dia
Supply and fixing the following ball valves without strainer all as specified & as directed by Engineer-in-Charge
25 mm dia
20 mm dia
Supply, installation, testing & commissioning of ball valve with strainer all as specified & as directed by Engineer-in-Charge
32 mm dia
25 mm dia
20 mm dia
Supply, installation, testing & commissioning of Globe Valve all as specified & as directed by Engineer-in-Charge
25 mm dia
20 mm dia
Providing and fixing the following ‘Y’ Strainers in position rating PN-16
50 mm dia
40 mm dia
32 mm dia
25 mm dia
20 mm dia
Supply, installation, testing and commissioning of TWO WAY MODULATING VALVES (AHU) provided with spring return function & fitted with modulating actuators in chilled water return lines at each air handling unit. The actuator shall have required shut off capability of minimum 4 bar rating. The valves & actuators for AHU’s shall be compatible with Building Automation System. The actuator shall be provided with interface cards to receive 0-10V or 4-20 mA signal from Building Automation System. The valve shall be suitable for following pipe sizes and provided with matching flanges and accessories.
65 mm dia
50 mm dia
40 mm dia
32 mm dia
25 mm dia
20 mm dia
Supply, installation, testing and commissioning of pressure independent balancing cum 2 way control valve provided with spring return function in chilled water lines at each fan coil unit. The actuator of the motorized valve shall have required shut off capability of minimum 4 bar rating with 230 V / 24 V transformer duly encased and wired. The valves shall be suitable for following pipe sizes.
25 mm dia
20 mm dia
Supplying, installation, testing and commissioning of 19 mm Auto air vents
Supplying and fixing in position SS 304 the industrial Dial type pressure gauges with gun metal valves.
Providing and fixing in position SS 304 the mercury-in- glass industrial Dial type thermometers.
Providing and fixing in position the Drain- Cock with ball valve 25 mm dia
Providing and fixing in position the following UPVC pipes for drain cut to required lengths and installed with all screwed joints, and providing and fixing in position the necessary elbows, tees and reducers as per specifications.
40 mm dia pipes
32 mm dia pipes
25 mm dia pipes
20 mm dia pipes
Supplying and fixing in position Automatic Balancing valves in position conforming to technical specifications Pressure rating-PN-16:
150 mm dia
125 mm dia
100 mm dia
80 mm dia
65 mm dia
50 mm dia
40 mm dia
32 mm dia
25 mm dia
20 mm dia
Supply, Installation, testing and commissioning of Motorised Butterfly valve (MODULATING) of following sizes with counter flanges and accessories Pressure rating - PN-16
50 mm dia
40 mm dia
32 mm dia
25 mm dia
20 mm dia
AIR DISTRIBUTION
Supply, Fabrication, installation and testing of sheet metal ducts (Factory Fabricated Ducts) in accordance with the approved shop drawings and as required by the specifications.
Maximum Duct Size-1-750 mm Gauge-26, Joint Type- C & S Connector
Maximum Duct Size-751-1000 mm Gauge-24, Joint Type- TDF Flange.
Maximum Duct Size-1001-1200 mm Gauge-22, Joint Type- TDF Flange, Bracing Spacing-JTR or ZEE BAR
Maximum Duct Size-1201-2100 mm Gauge-20, Joint Type- TDF Flange, Bracing Spacing- JTR or ZEE BAR
Maximum Duct Size-2101-2400 mm Gauge-18, Joint Type- TDF Flange, Bracing Spacing- JTR or ZEE BAR
Maximum Duct Size-2401-above mm Gauge-16, Joint Type- TDF Flange, Bracing Spacing- JTR or ZEE BAR
Supply, fabrication, installation and testing the Flexible connections constructed of fire resistance flexible double canvas sleeve as per the approved shop drawings.
Supply, installation and testing of galvanised steel construction Louver dampers within ducts to be provided with suitable ducts lever and quadrants for manual control of volume of air flow and for proper balancing of the air distribution system.as per the approved shop drawings and specifications.
Supply, installation, testing and commissioning of Motorised combined smoke & fire damper complete with control panel, inter connecting wiring at locations shown in approved shop drawings and specifications.
Smoke & Fire Dampers.
Control Panel & Wiring, actuators.
Supply, installation, testing and balancing of powder coated Extruded Aluminium supply Air Grilles with volume control dampers in accordance with the approved shop drawings and specifications. With horizontal fixed bars.
Supply, installation, testing and balancing of Air Grilles without volume control dampers for return/exhaust air in accordance with the approved shop drawings and specifications. With horizontal fixed bars powder coated extruded aluminium.
Supply, installation, testing and balancing of Square Shape ceiling diffusers with removable core & anti smudge ring & volume control dampers as per approved drawings and specifications. Powder coated extruded aluminium construction.
Supply, installation, testing and balancing of powder coated Square shape return air diffusers with removable core, antismudge ring & without volume control damper as per approved shop drawings & specifications. Powder coated extruded aluminium construction.
Supply, Fabrication, installation and testing of the Insulated Flexible Duct, complete with connecting rings, duct supports etc as per standards and specification of following sizes:-
250 mm dia
200 mm dia
100 mm dia
150 mm dia
Supplying & fixing of opposed blade Volume control dampers in supply air duct collars as per approved shop drawings and specifications.
Supply, installation, testing and balancing of inlet air louvers with bird screen and volume damper for fresh air, as per approved shop drawings & specifications. Powder coated/Anodised extruded aluminium construction.
Supply, installation, testing and balancing of louvers with bird screen for exhaust air as per approved shop drawings & specifications. Powder coated/Anodised extruded aluminium construction.
Supply and handing over to client(as spare) of 600 mm x 600 mm x 150 mm (deep) HEPA filters (efficiency 99.97% down to 0.3 microns)
Supply, installation, testing and commissioning of back draft dampers in pressurization fans
Supply, Fabrication, installation and testing Kitchen exhaust ducting of sheet 16 G Mild Steel. Suitable access doors shall be provided at every 3m.
THERMAL INSULATION
Supply, installation and testing of Acoustic lining with Neoprene faced fibreglass in supply and return air ducts as per the specifications. All ducts shown cross hatched on the approved shop drawings shall be provided with acoustic lining as per the specifications:
25 mm thick
50 mm thick
Supplying, installing and testing of 19 mm thick insulation with protective coating on chilled water and condensate drain piping and fitting like valves, flanges union, etc. as per the approved shop drawings and specifications, the 'R' value should be minimum R-0.35:
25 mm dia pipes
20 mm dia pipes
40 mm dia condensate drain pipes.
32 mm dia condensate drain pipes
25 mm dia condensate drain pipes
20 mm dia condensate drain pipes
Supply, installation and testing of 25 mm thick insulation with protective coating on chilled waterpipes and fittings like valves, flanges and unions, etc. as per approved drawings and specifications, the 'R' value should be minimum R-0.35 for the following:-
100 mm dia pipes
80 mm dia pipes
65 mm dia pipes
50 mm dia pipes
40 mm dia pipes
32 mm dia pipes
Supply, installation and testing of 32 mm thick insulation with protective coating on chilled water pipes and fittings like valves, flanges and unions, etc. as per the approved shop drawings & specifications, the 'R' value should be minimum R-0.35:
200 mm dia pipes
150 mm dia pipes
125 mm dia pipes
WATER COOLED CHILLED WATER UNITS
Supply, Installation, testing, connection and participation in commissioning of SCREW WATER CHILLING UNITS each complete with 150 TR actual capacity (300 TR PLANT CAPACITY ) at specified conditions, screw compressor, motor, starter panel machine mounted, water cooled condenser, insulated chiller, flow switch at chiller and condenser, vibration isolators, integral refrigerant piping and wiring, accessories as required and called for, automatic and safety controls mounted in central micro-processor based console panel and all mounted on a steel frame complete as per specifications. Motor shall be suitable for 415±10% 50 cycles. 3 phase AC supply. Refrigerant used shall be Ozone friendly R-134a/R-123 as detailed in specifications. The chilling unit shall be compatable with BMS system. (2W + 01SB) CHILLER Chilled Water IN 54 DEG F Chilled Water OUT 44 DEG F Fouling Factor 0.0005 CONDENSER Condenser Water IN 87 DEG F Condenser Water OUT 97 DEG F Fouling Factor 0.001 Minimum COP 5.4 IPLV 6.17 should confirm to ARI 550/590-1998 REFRIGERANT R-134a /R-123
Primary chilled water Pumps (including one as standby) for chilling units Flow rate = 360 USGPM, Pump Head = 15M of water column, Pump Motor HP = 7.5 HP.
Condenser Water Pumps (including one as standby) Flow rate = 450 USGPM, Pump Head =18M of water column, Pump Motor HP =12.5 HP
Secondary chilled water Pumps suitable for operation with VFD (including one as standby) for Zone A, Hospital Blocks Flow rate = 488 USGPM, Pump Head = 30M of water column, Pump Motor HP = 20 HP
Secondary chilled water Pumps suitable for operation with VFD (including one as standby) for Zone B including OT Block and ICU Block Flow rate = 235 USGPM, Pump Head = 25M of water column, Pump Motor HP =10 HP
Primary Hot water Pumps (including one as standby) for Hot Water Generator Flow rate = 50 USGPM, Pump Head = 15M of water column, Pump Motor HP = 2.0 HP
Secondary Hot water Pumps suitable for operation with VFD (including one as standby) for Zone B including OT Block and ICU Block Flow rate = 66 USGPM, Pump Head = 25M of water column, Pump Motor HP = 3 HP
HOT WATER GENERATOR Supply, installation, testing and commissioning of Electric Hot Water Generator of following Matching electrical immersion heater banks. All automatic and safety controls such as manual reset, high temperature cut off, step Electrical panel mounted on generator frame complete with internal wiring, contractors, Interconnecting cables between panel and heater. Thermometers and pressure gauges at inlet and outlet of electric hot water generator. Hot Water Generator as described above of Capacity 100 KW (including one as standby) Inlet Water Temperature 100 °F Outlet Water Temperature 120 °F Flow Rate = 50 GPM No. of Steps = 8 Smallest heater bank shall be 25 KW CHILLED/HOT WATER EXPANSION TANK
Supplying, installing, testing and commissioning of MS construction OPEN TYPE EXPANSION TANK with valves along with necessary accessories
Expansion tank of size 1.0 mx1.0 mx 1.0 m for Chilled Water System
Expansion tank of size 0.5 mx 0.5 mx 0.5 m for Hot Water System
Real Time Total active energy (KWH/MWH) Maximum demand (KVA/MVA) (KW/MW) Maximum demand reset count. Instantaneous power factor Logging of active energy eight time of a day Current Voltage Frequency / Harmonics Breaker ON / OFF / TRIP indicating lights with control MCB’s. BUS BAR 1000 amps TPN (50 KA), 91E grade Aluminium bus bars with insulated colour coded heat. OUTGOING Three(3) Nos. 315 amps TPN, MCCB, 50KA, TO 100KW starter of 150TR chiller. Each of Three(3) Nos. 315 amps TPN, MCCB,50KA, TO 100KW Hot Water Generator (HWG) Pump. Three(3) Nos. 32 amps, TPN MPCB's To 7.5 HP as an outgoing feeders to 1 No. Primary Two(2) Nos. 63 amps, TPN MPCB's To 20 HP VFD complete as required as an outgoing Two(2) Nos. 32 amps, TPN MPCB's To 10 HP VFD complete as required as an outgoing Three(3) Nos. 40 amps TPN MPCB's , 12.5 HP, as an outgoing feeders to 1 No. Condensor Two(2) Nos. 20/25 amps TPN MPCB's, for 3.0 HP VFD complete as required as an outgoing Three(3) Nos. 16/20 amps TPN MPCB's, for 2.0 HP, as an outgoing feeders to 1 No. Primary Two (2) Nos. 32 amps TPN MPCB's, 10 HP, as an outgoing feeders to 1 No. Cooling Tower
PIPING - CHILLED WATER & CONDENSER WATER Supply and fixing in position the following MS heavy class (C) pipes cut to required lengths and installed with all welded joints, providing and fixing in position the necessary fittings like elbows, tees and reducers, mating flanges & sockets for following:-
200 mm Dia
150 mm dia
125 mm dia
100 mm dia
80 mm dia
65 mm dia
40 mm dia
25 mm dia
Supply, Installation, testing and commissioning of Motorised Butterfly valve (MODULATING) of following sizes with counter flanges and accessories Pressure rating - PN-16
150 mm dia
125 mm dia
100 mm dia
Supply, Installation, testing & commissioning of Manual Butterfly valves with matching flanges. The valves should have feasibility of changing the inner lining if wornout and the handles should have lockable facility. Pressure rating - PN-16
200 mm dia
150 mm dia
125 mm dia
100 mm dia
80 mm dia
65 mm dia
40 mm dia
25 mm dia
Supplying and fixing the following Dual Plate Check valves with Pressure rating - PN-16 matching flanges in position conforming to technical specifications for following due:
150 mm dia
125 mm dia
100 mm dia
Supply and fixing the following ‘Y’ Strainers in position Pressure rating - PN-16 conforming to technical specifications:
150 mm dia
125 mm dia
100 mm dia
Supply and fixing in position the following automatic back wash type Pot strainers :
200 mm dia pipes-chilled water
200 mm dia pipes-condenser water
Supply, installation, testing and commissioning of Flexible connections of suitable pressure rating to be installed at pumps, chillers, suction, discharge and at pipes crossing building expansion joints.
150 mm dia pipes
125 mm dia pipes
100 mm dia pipes
Supplying, installation, testing and commissioning of 19 mm Auto air vents
Supplying and fixing in position SS 304 the industrial Dial type pressure gauges with gun metal valves.
Supplying and fixing in position SS 304 the mercury-in- glass industrial Dial type thermometers.
Supplying and fixing in position the Drain- Cock with ball valve 25 mm dia
Supplying and fixing in position Automatic Balancing valves Pressure rating - PN-16 in position conforming to technical specifications for the following:
150 mm dia
125 mm dia
PIPING - HOT WATER : Providing and fixing in position the following MS heavy class (C) pipes cut to required lengths and installed with all welded joints, providing and fixing in position the necessary fittings like elbows, tees and reducers, mating flanges & sockets for BAS:
80 mm dia
65 mm dia
50 mm dia
Supply, Installation, testing and commissioning of Motorised Butterfly valve with Pressure rating – PN-16 (MODULATING) of following sizes with counter flanges and accessories
65 mm dia
50 mm dia
Supply, Installation, testing & commissioning of Manual Butterfly valves with Pressure rating - PN-16 matching flanges. The valves should have feasibility of changing the inner lining if wornout and the handles should have lockable facility.
65 mm dia
25 mm dia
Supply and fixing the following Dual Plate Check valves with Pressure rating - PN-16 matching flanges in position conforming to technical specifications :
65 mm dia
Supply and fixing the following ‘Y’ Strainers Pressure rating - PN-16 in position conforming to technical specifications:
65 mm dia
Supply and fixing in position the following automatic back wash type Pot strainers of size 65 mm dia
Supply, installation, testing and commissioning of Flexible connections of suitable pressure rating to be installed at pumps, hot water generator, suction, discharge and at pipes crossing building expansion joints.
65 mm dia pipes.
Supplying, installation, testing and commissioning of 19 mm Auto air vents.
Providing and fixing in position SS 304 the industrial Dial type pressure gauges with gun metal valves.
Providing and fixing in position SS 304 the mercury-in- glass industrial Dial type thermometers.
Providing and fixing in position the Drain- Cock with ball valve 20 mm dia.
Providing and fixing in position Automatic Balancing valves Pressure rating - PN-16 in position conforming to technical specifications 65 mm dia.
THERMAL INSULATION
Supply, installation and testing of 25 mm thick insulation with protective coating on chilled water, hot water pipes and fittings like valves, flanges and unions, etc. as per for following pipes approved shop drawings and specifications, the 'R' value should be minimum R-0.35:
100 mm dia pipes
80 mm dia pipes
65 mm dia pipes
Supply, installation and testing of 32 mm thick insulation with protective coating on chilled water, hot water pipes and fittings like valves, flanges and unions, etc. as per the approved shop drawings & specifications, the 'R' value should be minimum R-0.35:
200 mm dia pipes
150 mm dia pipes
125 mm dia pipes
Supply, installation and testing of insulation IN TRENCH/BURIED chilled & hot water pipes and fittings etc. as per the approved shop drawings & specifications, the 'R' value should be minimum R-0.35:
150 mm dia pipes
100 mm dia pipes
65 mm dia pipes
AIR CONDITIONING PLANT
Supply, install, commissioning and testing of commercial Air curtain unit for preventionofdust and conditioned air losses, single phase, 220 V, 50 HZ, made out of MS/CRCA sheet of minimum thickness 18 gauge finished with two coats of red oxide primer and final coat of synthetic enamel paint (oven baked) with MS - CRC 18 gauge square perforated suction grills, Aluminium alloy fans and single phase electric motor, nozzles etc, complete with fittings and accessories so as to produce 1 - 1.5 m/sec air velocity at floor level for door opening as specified.
In OT of size -2400x2500MM DOOR SIZE
In ICU of size -2400x2500MM DOOR SIZE
In NICU of size- 2400x2500MM DOOR SIZE
(BOQ Schedule 'A' Part-XXVII). INTERNAL ELECTRIFICATION AXIAL FLOW FANS
TOILET EXHAUST FANS
TOILET EXHAUST FAN (CFM 420)
TOILET EXHAUST FAN (CFM 770)
TOILET EXHAUST FAN (CFM 1350)
TOILET EXHAUST FAN (CFM 3915)
TOILET EXHAUST FAN (CFM 1210)
TOILET EXHAUST FAN (CFM 1210)
TOILET EXHAUST FAN (CFM 2200)
TOILET EXHAUST FAN (CFM 650)
TOILET EXHAUST FAN (CFM 1407)
TOILET EXHAUST FAN (CFM 560)
TOILET EXHAUST FAN (CFM 2700)
TOILET EXHAUST FAN (CFM 1700)
TOILET EXHAUST FAN (CFM 2950)
TOILET EXHAUST FAN (CFM 1300)
TOILET EXHAUST FAN (CFM 1070)
TOILET EXHAUST FAN (CFM 800)
TOILET EXHAUST FAN (CFM 935)
TOILET EXHAUST FAN (CFM 990)
TOILET EXHAUST FAN (CFM 1025)
LAUNDARY EXHAUST FAN (CFM 7700)
LAUNDARY EXHAUST FAN (CFM 7700)
PLANTROOM FANS
HVAC PLANT ROOM EXHAUST (CFM 13000)
HVAC PLANT ROOM SUPPLY (CFM 13000)
PLUMBING PLANT ROOM EXHAUST (CFM 3400)
PLUMBING PLANT ROOM SUPPLY (CFM 3400)
LT ROOM EXHAUST (CFM 10000)
LT ROOM SUPPLY (CFM 10000)
STP EXHAUST FAN (CFM 10300)
STP SUPPLY FAN (CFM 10300)
ETP EXHAUST FAN (CFM 6300)
ETP SUPPLY FAN (CFM 6300)
Supplying, installing, testing and commissioning of INLINE FANS suitable for installing in any position in vertical or horizontal ducts. The casing shall be double skin, internally acoustically lined and constructed of galvanised steel. The fan shall be DIDW with forward curve impeller fitted with maintenance free external rotor motor. The motor shall be suitable for 220±10% volt single phase 50 cycles AC supply.
CSSD-AUTOCLAVE-BASEMENT (CFM 465)
AUTOPSY-BASEMENT (CFM 360)
SPECIMEN STORE-PATHOLOGY (CFM 250)
SPECIMEN CUBICALS-PATHOLOGY (CFM 220)
STOOL,URINE &EXAM-PATHOLOGY (CFM 240)
SLUICE- DELIVERY ROOMS-FF (CFM 170)
HP STERILIZER ROOM (CFM 400)
HAEMAT LAB (CFM 300)
HISTOLOGY LAB (CFM 300)
CHEMICAL LAB-1 (CFM 300)
OTHER SEROLOGICAL LAB (CFM 400)
BLOOD SCREENING LAB (CFM 650)
DELIVERY ROOM (CFM 360)
AUTOCLAVE (CFM 230)
PANTRY-BLOCK C- G FL (CFM 200)
SECOND FLOOR
DU/SL- BLOCK B (CFM 215)
DIRTY UTILITY- BLOCK B (CFM 240)
DIRTY UTILITY- BLOCK D (CFM 400)
THIRD FLOOR
DIRTY UTILITY-BLOCK B (CFM 265)
SOILED LINEN &DU BLOCK D (CFM 310)
TOILET EXHAUST FANS
SECOND FLOOR -BLOCK A (CFM 1100)
TOILET EXHAUST -SF-BLOCK C (CFM 160)
TOILET EXHAUST -FF-BLOCK E (CFM 250)
225 mm dia 900 RPM fan suitable for 220±6% volts 50 cycles, 1 phase AC supply.
300 mm dia 900 RPM fan suitable for 220±6% volts 50 cycles, 1 phase AC supply.
Supply, Installation, Testing and Commissioning of Electrostatic Type Kitchen Exhaust Air Cleaner (Dry Scrubber) complete with the following accessories, components etc. making it a completely functional dry scrubber suitable for Kitchen Hood Exhaust.
1. Casing - Shall be made of 0.63 mm galvanized pre-plasticized/powder coated sheet on outside and 0.63 mm GI sheet inside with PUF foam of 36 kg/m3 density insulation in between sheets to make 25 mm thick panels. 2. Pre Filter Section with Wire Mesh SS Filters for Coarse Particle Removal 3. Electrostatic Precipitator Section - Electrostatic section shall be made of 16 gauge galvanised sheet, high bake epoxy powder coated, SS Spiked ionizers to create high voltage DC field, aluminium collector plates which should be alternatively charged positive and negative with large collecting area with deep cell, to work as magnet for charged smoke and oil particles. Average efficiency of 90-95% in single pass as per ASHRAE/DOP test method. Electrostatic Precipitator should be able to charge particles from 0.01 micron to 10 microns through solid state power supply. Collector cell should be of permanent type and incorporate slide out facility for easy removal for cleaning. Power supplies shall be 100% solid state. 4. Fan Section with DIDW Backward Curved Fan having following capacity @ specified SP and should be complete with suitable TEFC Induction Motor and Belt Drive arrangements. Capacity: 12300 cfm @ 75mmwg SP Motor: 7.5KW.
Supplying, installing, testing and commissioning of CELLULOSE FILL AIR WASHER (Including fans), giving 95% adiabatic saturation efficiency at 500 FPM air velocity across pads, factory assembled and complete with 16 gauge GI casing, SS water sump , Cellulose fill, water distribution header, GI piping, Audco make butterfly valves, for quick fill; isolation of tank and pumps, Y strainers for pumps and necessary fittings.
The quoted price shall also include provision of GSS partitions duly reinforced at intake side of air washer and GSS louvers with bird-screen fabric filters and drift eliminators. The price shall also include horizontal monoblock pumps of Beaconweir / KBL make of suitable rating, factory mounted on mild steel channel base with electric motor for circulation of water alongwith starter panel. Pumps shall be aligned and suitable for 415±10% volts, 50 cycles 3 phase power supply. One No. 3 phase isolator switch in weather proof enclosure shall be provided near motor.each complete with squirrel cage induction motor (mounted internally), airfoil centrifugal fan belt drive and vibrations isolators.Motors shall be suitable for 415 +- 10% volts, 50 cycles , 3 phase AC supply an static pressure shall be as indicated . Fan-motor assembly (as whole) shall be statically & dynamically balanced to grade G6.3 as per ISO-1940/AMCA 204-3. It shall be suitable for outdoor duty and complete with duct flexible connections and volume control damper . CFM-11050
25 Amps MPCB, upto 7.5 HP DOL starter.
32 Amps MPCB, 10/12.5 HP Star Delta Starters
(BOQ Schedule 'A' Part-XXVIII). MISC ITEMS. Supplying, Installing, Testing & Commissioning of the Central Control Stations consisting of the following
Supply, installation, testing and commissioning of Intel Core i3-4150 Processor (Dual Core, 3MB, 3.50GHz w/HD4400 Graphics) (338-BEED), 8GB Dual Channel DDR3L 1600MHz (4GBx2) (370-AAPE), Intel Integrated Graphics, 128GB Solid Drive (400-ADLX), Windows 7 Professional, English, 64bit, US English (QWERTY) Dell KB212-B QuietKey USB Keyboard Black (580-AAQX), Up to 90% efficient PSU Base 49.5cm (19.5 INCH) Non-touch with Camera, Integrated (321-BBGU), 8x Slimline DVD+/-RW Drive (429-AAMY), Dell USB Optical Mouse MS111 (570-AACR), ENERGY STAR Version 6.0 (387-BBEZ), System Power Cord (Philipine/TH/US) (450-AAOJ), Safety/Environment and Regulatory Guide (English/French/Dutch) (340-AGIK), 1-Watt BIOS (340-ABMZ), Heat Sink for Integrated Graphics (412-AADE) with 20 Inch Monitor
A4 Size Laser Printer
Supplying, Testing and Commissioning of the Graphical Software providing the facility to create / provide the following, static and animate the Graphics, Navigation between pages, display of logs, changing the time zones.The BMS platform shall natively support standard communication protocols such as Modbus / BACnet™. The software should be Web Based Software Required to remotely monitor the system for 5 concurrent users. This software should have all kinds of dedicated application required to operate a Chiller Plant Manager, all the licenses required to make Chiller Plant Manager fully function shall a part of this software. IT SHOULD HAVE INBUIT FEATURE OF EMAIL FOR SENDING CRITICAL ALARMS WITHOUT ADDITING ANY EXTERNAL SOFTWARE/HARDWARE. IT SHOULD HAVE INBUILT FEATURE OF ENERGY MONITORING.
Supplying, Testing and Commissioning of the necessary Hardwares/Softwares for Integrating it with 3rd party Devices on Bacnet/Modbus. Integrator module Shall be of Controller Manufacturer only. (a) chiller-3 Nos, (b) Variable speed pump VFD-11 Nos
Supply, Installation, Testing & Commissioning the following equipment: Network controller - Providing, installing, testing and commissioning of Network Supervisory Controller unit for connecting all controllers to it and transferring data to PC platform.(A) The unit shall comply following codes and standards: UL and CE.(B) The unit shall support OPEN STANDARD protocol BACnet and Modbus (C) Shall be able to store reports and event logs.(D) WEB ENABLED.The controller shall be capable of connecting the future expansion DDCs / Integrators. The Controller shall be able to support both Modbus & BACnet controllers. It should have at least 3 configurable ports for connecting BACNET/MSTP devices & all these ports should be capable to work as Modbus port. Each port should be able to take at least 60 DDCs in a single loop. It should be capable of storing data at least for 30 hours without any battery in case of power failure & should have micro SD card for backup recovery. It should have capability to connect expansion modules for enhanced flexibility. It should be web enabled and should be able to work with any kind of search engine, it should have wi-fi capability to connect with remote devices. It should freely support Android and MAC mobile applications for remotely managing the system through GPRS for wi-fi connectivity without any additional cost. It should have a feature to be used as a gateway/router for 3rd party applications on BACNET. It should be web enabled and should not require any software for controlling/monitoring of hard wired points. HIS CONTROLLER SHOULD WORK AS A CHILLER PLANT MANAGER MODULE ON WHICH CPM PROGRAMMES & LOGICS CAN BE WRITTEN, NO CHINA MADE CONTROLLERS ARE ACCEPTED.
Programmable and Application specific controller - Providing, installing, testing and commissioning of filed mounted BACNet IP controllers of the following configurations and as per below specifications: (A) The programmable controllers processors shall be 32-Bit, 50 MH, BACnet Compatible.The DDC Controllers should be on BACnet, UL listed & BTL tested. The DDC controller shall be as per the I/O Summary. The Controller shall have built in memory, minimum 4 GB, to save, Alarms, Trends, Schedules & graphics for the connected points. Controller shall have onboard LAN port. Providing, installing, testing and commissioning of vandal proof, lockable and secure MS cabinets for the Controllers along with all accessories shall be part of this item. NO CHINA MADE CONTROLLERS ARE ACCEPTED. Maximum 4 AHU to be connected per DDC panel. Minimum 15% spare IO Points needs to be kept.
Supply, installation, testing & commissioning of the following Sensors :
Differential Pressure switch across the Air Handling Units for indicating the fan & filter status
Current Relay
Duct type temperature sensors for measuring Return air temperature at the Air Handling Units
Immersion Temperature Sensor
Outside Temp + RH Sensor
Single level switch for CT
Ultrasonic Clampon Flow Meter
Wall mounted display type & RH temperature sensor
Water Pressure differential pressure transmitter
Supply, Installation, Testing & Commissioning of the following cables as per the specifications:
Unshielded Signal Armoured Cables, 2 C X 1.0 Sq.mm. stranded tinned Cu Conductor, PVC sheathed type. Signal Cable from Controllers to Sensors shall be used.
Shielded Communication Armoured Cables, 2 C X 1.0 Sq.mm.stranded tinned Cu Conductor, PVC sheathed. Communication Cable from Controllers to Controllers & to Third Party Devices shall be used.
Unshielded Signal Armoured Cables, 3 C X 1.5 Sq.mm. stranded tinned Cu Conductor, PVC sheathed type. Signal Cable from Controllers to valve shall be used.
Cat6e Cable with PVC Conduit
Supply and fixing GI perforated cable trey for the following sizes including providing removable cover knock out holes and fixing accessories complete as required including floor supports, bonds, access boxes and tap off boxes as per specification and cross over as per site requirement
(a) 25 x 50 x 25mm
(b) 25 x 100 x 25mm
Programming and commissioning of entire system
Supply and installation of external thermal insulation with protective coating on ducts as per specification the ‘R’ value should be minimum R-0.6. (a) 19mm thick insulation for return air ducts and supply ducts in return air path.
(b) 13mm thick insulation for supply air ducts.
(BOQ Schedule 'A' Part-XXIX). MEDICAL GAS PIPELINES SYSTEM.
Supply, Instllation testing and commissiong of copper piping as per technical specification BS: 13348 as mentioned here-in-after. Note :- Installation of piping shall be carried out all as per international standards with utmost cleanliness. Only pipes, fittings and valves which have been degreased as per International standards shall be used, pipe fixing clamps for upto 28mm diameter, pipes shall be non ferrous suitable for the diameter of the pipe. For the pipes of the size above 28mm rigid metallic hanging or cemented supports to be used. The main lines to the building to be taken overhead through metallic poles or through underground ducts with inspection removable slabs, All pipe joints shall be made using inert gas fluxless brazing method. All joints shall be of copper to copper and shall be brazed by silver brazing filler material without flux. During brazing, joints shall be continuously purged with oil free dry nitrogen to prevent the formation of copper oxide on the inside surface of the joint. All pipes shall be installed without springing or forcing and shall be protected against mechanical injury. Testing: After erection, all the new pipes cleaned or purged with the help of dry nitrogen gas. Complete system shall be tested with dry nitrogen 2 times of working pressure for 24 hours. Painting: All existing and exposed pipes shall be painted with two coats of synthetic enamel paint with color codification as per international standards. All concealed pipes to have gas identification bands / labels at appropriate distance. All pipes which are embedded in the walls shall be tested/painted/labeled and properly insulated. Certification: It is to be ensured that pipes are fit for the particular service and complete cross connection (anti-confusion) test shall be carried out. Distribution piping system: MATERIAL (PIPE): Solid drawn, seamless, deoxidized, non arsenical, half hard, tempered and degreased materials conforming to BS: EN 13348 medical grade pipe. Third party inspection shall be carried out for copper piping with a certificate (Eg. Lloyd’s or TUV or SGS). Fittings shall be made of copper and suitable for a working pressure of up to 17 bar and specially made for brazed socket type connections. Copper fittings shall comply with EN 1254:1 factory degreased and brazing filler metals shall comply with EN 1044. Fitting shall be degreased, individually packed for medical use. Installation & testing Installation of piping shall be carried out with utmost cleanliness. Only pipes, fittings and valves that have been degreased and fittings shall be used at site. Pipe fixing clamps shall be of non-ferrous or non-deteriorating plastic suitable for the diameter of the pipe.
Inert gas welding technique shall be adopted by passing oxygen free nitrogen gas inside the copper pipes during silver brazing, in order to avoid carbon deposition inside the copper pipes, only copper-to-copper joints are permitted on site except threaded or flanged joints may be made where pipelines are connected to items such as valves and control equipment. No flux shall be used for joining Copper to Copper joints and on for joints made on site. Copper to copper joints shall be brazed using a 2% silver-copper phosphorous brazing alloy CP104. A total of 5 joints shall be cut out for examination to establish the quality of the joints being made on site. The insides shall be clean and free from oxides and particulate matter and the minimum penetration of the brazing alloy at any point shall be three times the wall thickness of the tube. If the joints examined do not conform to these requirements, then adjacent joints shall be cut out and examined until the extent of faulty workmanship has been made good. Copper-to-brass or gunmetal joints shall only be made under controlled conditions off site. The joints are ordinarily used to join short copper pipe tails to brass, gunmetal or bronze fittings to permit their connection into the pipeline. The sub-assemblies shall be degreased and individually sealed in bags or boxes before delivery to site. Adequate supports shall be provided while laying pipelines to ensure that the pipes do not sag. Suitable sleeves shall be provided wherever pipes cross through walls / slabs. All pipe clamps shall be non-reactive to copper. After erection, the pipes are to be flushed with dry nitrogen gas and then pressure tested with dry nitrogen at a pressure equal to twice the working pressure or 150 psig, whichever is higher for a period of not less than 24 hours. Maximum interval between supports (Horizontal and Vertical) shall be as under:- (12mm Pipe - 1.5m, 15mm pipe - 1.5m, 22mm pipe – 2m, 28mm pipe-2m, 35mm pipe-2.5m, 42mm pipe -2.5m, 54mm pipe - 2.5m, 76mm pipe – 3meter)Painting. All the pipes from manifold/plant upto the outlets should be painted with two coats of synthetic enamel paint and colour codification should be as per standards followed and with consultation with competent authorities of the Institute.
(i) 76mmODX1.5mm thick
(ii) 54mmODX1.2mm thick
(iii) 42mm ODX1.2mm thick
(iv) 28mmODX 0.9mm thick
(v) 22mmODX 0.9mm thick
(vi) 15mm ODX 0.9mm thick
(vii) 12mm ODX 0.9mm thick
Supply,Installation, testing and commissioning of gas outlet points for Oxygen, Nitrous Oxide, Air, AGSS & Vacuum system as per technical specification of HTM 02-01/ISO 7396-1/NFPA99 standards and all as specified here-in-after. Note:- Terminal units shall be capable of single-handed insertion and removal of the medical gas probe. The anaesthetic gas scavenging (AGS) terminal unit shall conform to BS6834: 1987/NFPA99. The gas terminal unit shall be as per EUQ medical device regulation (here-in-after called as MDR) / medical device directeive (here-in-after called as MDD). The gas terminal unit should be EU MDR / MOD Certified from notified body having four digit notified body number of American UL/ETL Listed. The wall mounted first fix assembly shall consist of brass pipeline termination block with copper stub pipe secured between a back plate and a gas specific plate to allow limited radial movement of the copper stub to align with the pipeline. The gas specific plate shall be fixed to the backplate by means of a tamper proof clip-fit mechanism. The first fix shall incorporate a maintenance valve (except for vacuum) and a test plug. The test plug shall provide an effective blank to enable carcass pressure testing. The second fix plastic components shall be manufactured with the pin index permanently moulded into the gas specific socket. The socket assembly shall retain a capsule assembly, containing the check valve and probe ‘O’ ring seals. The replaceable capsule assembly shall enable all working parts subject to wear through usage to be replaced as a factory tested assembly, thereby reducing maintenance time. Each termination block assembly shall be pressure tested by the pressure decay method. Terminal units shall be gas specific and only accept the correct medical gas probe. Gas specific components shall be pin-indexed to ensure that a correct gas specific assembly is achieved so that in normal course of dismantling for repair or maintenance, parts from other gases cannot inadvertently be used. Wall mounted terminal units shall incorporate an anti-rotation pin to engage with connected downstream medical equipment ensuring correct orientation. All screws, probe roller pins, locking springs and the anti-rotation pin shall be manufactured from stainless steel. The second fix assembly shall be incorporate three injection moulded parts in fire-retardant nylon 66. All wetted parts (except seals) shall be brass or copper. Copper stubs pipes shall be manufactured from phosphorous de-oxidised non-arsenical copper to BS EN 1412:1996 grade CW024A, manufactured to metric outside diameters in accordance with BS EN 13348:2001 R250 (half hard) or Type K for all gas services. All user accessible parts, 2nd fix, gas ID ring, plaster box, fascia cover and inks shall include a silver antimicrobial additive for inherent antimicrobial protection. Terminal units installed in walls, bedhead trunking, headwalls or fixed pendants shall be connected to the pipeline with a copper stub pipe. Pressure gases and vacuum shall incorporate a 12mm copper stub pipe or 1/2” O.D. copper Type K with a swaged end for direct connection to a 12mm O.D. copper tube without the need for an extra fitting, thereby requiring only a single brazed joint to be made. Terminal units for anaesthetic gas cavenging shall incorporate a 15mm O.D. copper stub pipe.
(i) for Oxygen
(ii) for Nitrous Oxide
(iii) for Compressed Air ( 4 Bar )
(iv) For Compressed Air (7 Bar)
(v) For Vacuum
(vi) For AGSS/WAGD
Supply,Installation, testing and commissioning of matching probe/adopter with one end suitable for hose & other end suitable for terminal units as per technical specifications NFPA99/HTM 02-01/ISO 7396-1 : MATCHING PROBE / ADOPTERS FOR, GAS OUTLETS as per NFPA-99 latest edition / HTM 02-01 listed one end of matching probes shall be suitable for Medical Gas Outlet point & other end shall be suitable for hose for Oxygen, Nitrous Oxide, Compressed air 4 bar, compressed air 7 bar, DISS connection, vaccum.
(i) for Oxygen
(ii) for Nitrous Oxide
(iii) for Compressed Air ( 4 Bar )
(iv) for Compressed Air (7 Bar)
(v) for Vacuum
(vi) for AGSS/WAGD
GAS ALARMS Supply,Installation, testing and commissioning of TOUCH SCREEN MASTER ALARM PANEL which shall comply with NFPA99/HTM 02-01/ISO 7396-1 standard. NOTE:- It shall be EUROPEAN CE certified from notified body having 4 digit notified number/American ETL or UL or ATL Listed.Master Alarm System panel shall be microprocessor based with individual microprocessors on each area display and sensor board. The sensors shall be capable of local or remote mounting. Each area display module/sensor unit shall be gas specific & with an error message display for an incorrect connection. Alarm shall be capable with hospital BMS facility. Master Alarm panel allow users to set up customized instructions for each alarm signal, to appear on the screen when the signal is in alarm. Alarm shall be with the touch screen interface on the alarm panel LCD. Edit or Incorporate user-defined instructions into an emergency response plan by the hospital facility. Alarm shall be capable of monitors up to 25-60 local inputs. The alarms shall be field expandable with the facility for addition of extra modules up to six services to be accommodated per standard box. A built-in web server in each panel allows a remote operator to display the alarm's web page and view alarm signals, pressures, and other networked devices. Each specific service shall be provided with numerical digital read comprising of 0-250 psi for positive pressure and 0-30 inch Hg for vacuum. The touch screen panel readout shall provide a constant indication of each service being measured. Minimum screen size shall be 7-8 inches Touch Screen LCD Display. A bar graph trend indicator shall be provided for each service indicating a green “NORMAL”, yellow “CAUTION” and a red “HIGH” or “LOW” alarm condition. Under normal operation the bar graph display shall move up and down in the green range depending on service usage. If an alarm occurs, the “RED” alarm light will flash and an audible alarm will sound. Pushing the “ALARM SILENCE” button will cancel the audible alarm but the unit will remain in the alarm condition until the problem is rectified. The default set points shall be +/- 20% variation from normal condition. In the calibration mode the following parameters shall be field adjustable:
High/Low set points Imperial /Metric Units Repeat alarm enable/disable Set points shall be adjustable by two on board push buttons. In addition, “PUSH TO TEST” & “ALARM SILENCE” buttons shall be easily accessible to operate and test the unit. Combination master/area alarms shall have no moving parts and shall require no maintenance after initial installation. • Medical Gas Pipleine plant room/manifold alarm system shall indicate the following O2/N2O/Co2 gases pressure Normal / Low / Hi with digital read out Medical Air System pressure Normal / Low / Hi with digital read out Medical Vacuum System pressure Normal / Low / Hi with digital read out The emissions from alarms shall conform with EMC standards or as per guideline of standard to be followed.
(i) 2 Gas Service
(ii) 3 Gas Service
(iii) 5 Gas Services
ZONAL VALVE BOX WITH GAUGES Supply,Installation, testing and commissioning of Zonal Valve boxes which shall be manufactured of 18 gauge steel/aluminium sheet with white enamel finish. The valve box shall have a sliding, opaque door with pull ring and clear gauge window. The removable window cannot be replaced when any valve is closed. The frame assembly shall be capable of adjusting for variances in wall thickness up to 1”. The window shall conceal piping and mounting screws. Window shall be labeled “Caution Medical Gas Shut - Off Valves - Close Only in Emergency.” Provide clear viewing space in the window to display the gas service, the pressure gauges and the label for areas controlled by the valve. a) All Medical Gas Valves along with Gauges shall be incorporated with Valve box and shall conform to HTM0201/ISO 7396-1/NFPA 99. Valves shall be ball-type, with Teflon seats and adjusting stem packing gland with Teflon stem seal. b) Ball valves shall be rated 600 WOG, actuate from full “ON” to full “OFF” by 90 degree turn of vinyl gripped valve handle. c) Furnish and install only valves with factory installed BS EN 13348 copper tubing or type K copper tubing extensions. d) Minimum Gas Valves size should be 15mm & 22mm or 1/2'' & 3/4'' e) All valves shall be cleaned for oxygen, capped and sealed in a polyethylene bag for shipping and storage. f) Colour coded self-adhesive gas labels for compliance with NFPA 99/HTM 02-01/ISO 7396-1 labeling shall be applied. Apply labels to each valve in the assembly for gas service identification according to manufactures recommendations. g) Zone valves shall include 1.5 inch pressure gauge reading 0 to 100 psig for oxygen, air, nitrious oxide , CO2; 0 to 300 psig for surgical air; and 0 to 30 HG for vacuum. h) All zone valve boxes assemblies shall read pressure downstream and vacuum upstream of the valve as NFPA 99/HTM0201/ISO 7396-1. Valves shall be piped left to right with right being on patient side. The medical gas valve box should be CE marked and fully satisfy the requirement as per HTM0201/ISO 7396-1/NFPA99.
(i) 2 Gas Service
(ii) 3 Gas Service
(iii) 5 Gas Services
Supply, Installation, Testing and Commissioning of Oxygen Manifold ( 16+16) as per technical specifications given here-in-after. Note:-The cylinders shall not be included in the quoted price. : Oxygen Manifold 16+16 As per NFPA-99 latest edition / HTM 02-01 standard latest edition/ISO 7396-1 latest edition. The Modular Manifold system shall comprise of extendable bank's of 16+16cylinders. High pressure copper pipes of size 1/2" ID x 15 swg & High pressure brass fitting made of high tensile brass shall be used. Flexible copper tail pipes with bull nose RH threads shall be used to connect the gas cylinders to the header assemblies with non return valves. high pressure flexible tail pipes should be made of copper pipe of ID 1/4 " x 15 swg the manifold shall be tested hydraulically at 225 Kg/ cm2 pressure. it shall be degreased for oxygen service and shall be supplied duly wrapped in a polythene bag. Each header bar shall be provided with respective numbers of cylinder pigtail connections to suit cylinder valves as per IS 3224/ BS/ ASME incorporating a check valve at the header connection. The system shall have non return valves for easy changing of cylinders without closing the bank. The cylinder shall be placed with the help of cylinder brackets and fixing chains which shall be galvanized.
Supply, Installation, testing and commissioning of 10 cylinder Emergency Oxygen Supply System with fully automatic manifold control as per technical specifications given here-in-after. Note:- The cylinders shall not be included in the quoted price. : Emergency Oxygen System - As per NFPA-99 latest edition / HTM 02-01 standard latest edition/ISO 7396-1 latest edition. The Modular Manifold system should comprise of extendable bank's of 10 cylinders. High pressure copper pipes of size 1/2" ID x 15 swg & High pressure brass fitting made of high tensile brass should be used. Flexible copper tail pipes with bul nose RH threads shall be used to connect the gas cylinders to the header assemblies with non return valves,isolation valve & Manual regulator. high pressure flexible tail pipes shall be made of copper pipe of ID 1/4 " x 15 swg. The manifold should be tested hydraulically at 225 Kg/ cm2 pressure. It shall be degreased for oxygen service and shall be supplied duly wrapped in a polythene bag. Each header bar shall be provided with respective numbers of cylinder pigtail connections to suit cylinder valves as per IS 3224/ BS/ ASME incorporating a check valve at the header connection. The system shall have non return valves for easy changing of cylinders without closing the bank. The cylinder shall be placed with the help of cylinder brackets and fixing chains which shall be galvanized.
OXYGEN FLOW METER WITH HUMIDIFIER BOTTLE (CE MARKED) Supply, Installation, testing and commissioning of OXYGEN FLOW METER WITH HUMIDIFIER BOTTLE It shall be as per Class I of Medical Device Directives (93/42/EEC) & CE marked. It shall be manufactured in an ISO 13485:2003 quality management system duly certified constructed in accordance with the requirement of international standard. Back Pressure Compensated flow meter for accurate gas flow measurement with following features: A) Control within a range of 0-15 LPM. B) It shall meet the precision and durability standard. C)The flow meter body shall be made of brass chrome plated materials. D)The flow tube and components shall be made of clear, impact resistant polycarbonate. E)Flow tube shall have large and expanded 0-15 LPM range for improved readability at low flows. F) Inlet filter of stainless steel wire mesh to prevent entry of foreign particles G) The humidifier bottle shall be of capacity 200ml and shall be made of unbreakable & reusable polycarbonate /polysulfone/polypropylene material autoclavable at 121 degree centigrade.
Supply, Installation, Testing and Commissioning of Nitrous Oxide Manifold ( 1+1) as per technical specifications as mentioned here-in after. The cylinders shall not be included in the quoted price. : N2O manifold header as per NFPA-99 latest edition / HTM 02-01 standard latest edition/ISO 7396-1. The Modular Manifold system shall comprise of extendable bank's of 4+4 cylinders. High pressure copper pipes of size 1/2" ID x 15 swg & high pressure brass fitting made of high tensile brass shall be used. Flexible copper tail pipes with bull nose RH threads shall be used to connect the gas cylinders to the header assemblies with non return valves. High pressure flexible tail pipes shall be made of copper pipe of ID 1/4 " x 15 swg the manifold shall be tested hydraulically at 225 Kg/ cm2 pressure. It shall be degreased for oxygen service and be supplied duly wrapped in a polythene bag. Each header bar shall be provided with respective numbers of cylinder pig tail connections to suit cylinder valves as per IS 3224/ BS/ ASME incorporating a check valve at the header connection. The system shall have non – return valves for easy changing of cylinders without closing the bank. The cylinder shall be placed with the help of cylinder brackets and fixing chains .
Supply, Installation, testing and commissioning of 2 cylinders emergency N2O supply system with fully automatic manifold control including Heating Kit as per technical specifications as mentioned here-in after. Note:-The cylinders shall not be included in the quoted price. Emergency Oxygen System shall be as per NFPA-99 latest edition / HTM 02-01 standard latest edition/ISO 7396-1. The Modular Manifold system should comprise of extendable bank's of 10 cylinders. High pressure copper pipes of size 1/2" ID x 15 swg & high pressure brass fitting made of high tensile brass shall be used. Flexible copper tail pipes with bull nose LH RH threads shall be used to connect the gas cylinders to the header assemblies with non return valves,isolation valve & manual regulator. High pressure flexible tail pipes shall be made of copper pipe of ID 1/4 " x 15 swg. The manifold shall be tested hydraulically at 225 Kg/ cm2 pressure. It should be degreased for oxygen service and shall be supplied duly wrapped in a polythene bag. Each header bar shall be provided with respective numbers of cylinder pig tail connections to suit cylinder valves as per IS 3224/ BS/ ASME incorporating a check valve at the header connection. The system shall have non – return valves for easy changing of cylinders without closing the bank. The cylinder shall be placed with the help of cylinder brackets and fixing chains .
Supply, Installation, testing and commissioning of Combined Medical Air System with minimum Duplex configuration in one package. The combimned medical air plant capacity shall be 2100 LPM includes running & standby (One running + One standby) designed to provide Pharmacopeia grade medical air for health care facilities. The unit shall be equipped with the HTM0201/ISO 7396-1/NFPA99 mandated features as per compliant medical gas pipeline systems. Medical Air compressors with integrated compressors, duplex dryers, duplex filtration, instrumentation and controls all assembled in one package . All controls between compressors & dryers are connected and wired. Oil Lubricated Screw/Oil Free Scroll/Oil Free Screw/Oil Free tooth compressors shall be equipped with integrated VSD/VFD drive mechanism. Intelligent human machine interface incorporating on board flash memory and real-time clock for recording operational parameters in the event log. The central control system shall operate at low voltage and include BMS connection for system fault, system emergency, reserve fault and pressure fault. The central control unit shall incorporate a user friendly 5” high-definition coluor touch screen display with clear pictograms and LED indicators, providing easy access to system operational information. The controller shall be equipped with the remote monitoring function. The air system shall incorporate minimum duplex compressors suitable for both continuous and frequent start/stop operation at a nominal outlet pressure of 1000 kPa (10 bar). Each compressor output 1200 LPM @ 9-10 bar pressure. The noise level of the each compressor shall be maximum 62dB(A). The duplexed filter and dryer module shall incorporate high efficiency water separators, oil coalescing general purpose & high efficiency filters, heatless regenerative desiccant dryers, activated carbon filters with hopcalite catalyst and bacterial filters. The performance of the filters shall be according to technical specifications given here-in-after. • Oil coalescing general purpose filter: mass efficiency of 99,3%, tested according to ISO 8573-2 & ISO 12500-1; • Oil coalescing high efficiency filter: mass efficiency of 99,92%, tested according to ISO 8573-2 & ISO 12500-1; • Activated carbon filter: max remaining total oil content of 0,003 mg/m³, tested according to ISO 8573-5 & ISO12500-2;
• Bacterial filter: particle count efficiency of 99,98% at MPPS=0.06μm, tested according to ISO 12500-3. The dryer control system shall incorporate a Purge Control Management system with digital dew point minitor that freezes the regeneration of the desiccant once adequate dew point is reached in the inactive tower. Only when the dew point level in the active tower deteriorates to an unacceptable level will the intelligent controller switch towers. Dryer shall be equipped with central control system shall operate at low voltage and include BMS connection for system fault, system emergency, reserve fault and pressure fault. The central control unit shall incorporate a user friendly 5” high-definition color touch screen display. with clear pictograms and LED indicators, providing easy access to system operational information. The controller shall be equipped with the remote monitoring function. The air receiver shall be supplied with relevant test certificates. Each air receiver shall be fitted with a zero-loss electronic drain valve. The receiver assembly shall be fitted with a pressure safety valve, set at 10% receiver over pressure with a pressure gauge. The receivers shall be installed separately and sized according to the design guidelines. The system shall be tested at factory as a complete medical device. In case of NFPA99 compliance system, there shall be confirmation/declaration from OEM on their letter head and third party factory test report.
Supply, Installation, testing and commissioning of Medical Vacuum Supply System conform to HTM0201/ISO 7396-1/NFPA99 with Duplex Configuration (One running + One standby) in one package as per technical specifications as mentioned here-in after. Note:-Vacuum pumps shall employ automatic rotation of the lead pump to maximize pump life and ensure even wear. It shall ensure the minimum pipe line vacuum level of -450mmHg is maintained at the plant service connection point at the rated volumetric ‘free air’ flow rate with two pumps with one pump on standby. The bacteria filtration system shall be ‘duplexed’ such that each filter can be isolated for replacement of the filter cartridge. The vacuum pumps shall be single-stage, oil-sealed and air-cooled rotary vane vacuum pumps driven by an electric motor. Pumps shall be specifically designed to work with clean air, inert gas or small amounts of water vapour the pump has an inlet port with exhaust port and a gas ballast valve. Vacuum pumps shall be air-cooled, oil lubricated rotary vane type suitable for both continuous and frequent start/stop operation. A rotor with three vanes is positioned inside the pump cylinder and it is supported by means of two bearings. Rotors shall be driven by IE3 efficiency electric motors. Pump inlets shall include an integral non-return valve to prevent oil suck back and pressure increases in the vacuum system. Each vacuum pump shall have an integral separator filter to ensure a virtually oil-free exhaust. Each pump shall be fitted with anti-vibration pads between the pump foot and mounting frame. The pumps shall have mineral oil to ensure a long service interval. Each Vacuum Pump produces minimum 4000LPM. The factory packaged skid frame mounted vacuum systems consists of rotary vane vacuum pumps, duplex bacteria filteration, pre-wired control panel. interconnecting wiring & piping. The package Medical Vacuum system should be integrated with Verical Vacuum Receiver. Bacteria Filters The duplex bacteria filter system shall incorporate high efficiency filter elements. A differential vacuum indicator shall be installed across the filter to indicate blockage. Additional pressure sensors shall be installed at the inlet and outlet of the filter to measure the pressure drop across the filters. Each filter shall be designed and sized to carry the full plant design flow capacity with a pressure drop not exceeding 33mbar (25mmHg). Bacteria Filter elements shall have penetration levels not exceeding 0.005% when tested by the sodium flame method in accordance with BS 3928:1969 and utilizing particles in the 0.02-to-2-micron size range. Drain flasks shall be connected to each filter. Drain flasks shall be manufactured from transparent material with a polymer coating on the inner and outer surfaces to maintain a seal in the event of inadvertent breakage of the Pyrex flask. All drain flasks shall be suitable for sterilization and be connected via a manual isolating valve.
Control System The central control system shall provide an intelligent human machine interface incorporating on board flash memory and real-time clock for recording operational parameters in the event log. The central control system shall operate at low voltage and include BMS connection for common fault. Visualization of plant inputs, outputs, and status through a web browser, using a simple. The central control unit shall incorporate a user friendly 4.3” high- definition touch screen displays with clear pictograms and LED indicators, providing easy access to system operational information. The controller shall be equipped with an integrated 4G module for remote monitoring of the equipment. Cascading of vacuum pumps shall be achieved by measuring the vacuum level at the plant inlet with a pressure transducer. A mechanical back-up facility shall ensure continued operation in the event of a control system malfunction. The control system shall normally employ automatic rotation of the lead pump to maximize pump life and ensure even wear. Vacuum receiver(s) shall be supplied with relevant test certificates and have a total volume of at least 100% of the plant output in 1 minute in terms of free air aspired at normal working pressure. Each vacuum receiver shall be powder coated from inside and outside. The receivers shall be installed separately and sized according to the design guidelines.
WARD VACUUM UNIT (CE marked) Supply, installation, testing and commissioning of Medical Device Directives (MDD) / Medical Device Regulation (MDR) (Class-I) (93/42/EEC) & CE marked. It shall be manufactured in an ISO 13485:2003 quality management system duly certified constructed in accordance with the requirement of international standard. It must consist of technical specifications given here-in-after. 1. One number of Suction Regulator and 1no of 1000 ml polysulfone /polycarbonate/polypropylene collection jar. 2. Suction Regulator - rSunction regulator shall be supplied with a safety jar, antibacterial filter and an anti-overflow safety device& shall have wide membrane continuous suction controller 3. WVU shall have vaccum levels: 0-760 mm of Hg and gauge fitted with a protective bumper device. 4. It shall be provided with on / off knob allowing for the quick restoration of a readjusted vacuum level. 5. Adjustment knob with a colour coded for 0 to 760 mm of Hg. Should have Polysulfone/polycarbonate 100cc safety jar, autoclavable at 121º C, unbreakable, fitted with an anti-overflow safety device and equipped with a plastic antibacterial filter. It shall be totally transparent, to ensure perfect sucked liquid visibility.
Theatre Suction Unit ( CE marked) Supply, installation, testing and commissioning of Theatre Suction Unit Certified as per Class I of Medical Device Directives (MDD) / Medical Device Regulation (MDR) (93/42/EEC) & CE marked. It shall be manufactured as per ISO 13485:2003 quality management system duly certified constructed in accordance with the requirement of international standard. It will be trolley mounted. The unit will include one regulator having gauge and mounted on the trolley stand, having two reusable each 2000 ml plastic collection bottles mounted on the base of trolley unit and connected with regulator & low pressure tube inter-connections. Safety Jar 200 cc to be provided with regulator. The collection jar is made of unbreakable material, which is fully auto-cleavable at 121 Degree Centigrade.
Supply installation testing and commissioning of high pressure hose antistatic duly colour coded for Oxygen, Nitrous Oxide Compressed air and vacuum as per technical specifications as mentioned here-in after. It shall be as per International standard, antistatic and colour coded rubber tube – white for oxygen, blue for nitrous oxide, black for compressed air and yellow for vacuum with low pressure tubes for vacuum application.
HORIZONTAL/ VERTICAL BED HEAD PANEL (CE marked) Horizontal/ Vertical Bed Head Panel (CE marked)-1200mm upto 2 Gas Outlets, configurations along with electrical switches. It shall confirm to HTM 02-01/ NFPA 99/EN/DIN/ISO 7396-1. The design shall be approved by the respective institute before installation and it is responsibility of the bidder after getting order they have to discuss with respective hospital authority and finalized the Bed Head Panel (Vertical/Horizontal) as per site condition. - Efficient, Safe & Robust design in extruded aluminium section. - Smooth curved surfaces, and choice of base colour and fascia plates. - Unit should have integrated rail system to mount accessories - The headwall system should be constructed of aluminium extrusions joined together to form a carcass to suit the particular application. Unit should be factory assembled for electrical and mechanical components. - Segregation of services i.e. Low voltage supplies, High Voltage supply and Medical gases should be maintained with minimum 2 tier/2 channel arrangements. - Front fascia plate should be removable individually to access for respective service. - It should have one rail for mounting Accessories. - Each bed-head unit shall be supplied with electrical and electrical outlets pre-fitted. Gas Outlets, Electrical sockets and others accessories configuration as follows for: 1200mm Bed Head Trunking configuration 1. O2 x 1 2. Vac x 1 3. 5 /15A combined Electrical socket with switch- 4 nos. 4. Vacuum Jar holder- 1 no. 5. Cut out/provisin for Nurse call bell 6. RJ45 socket/Ethernet-1 7. SS Basket Gas Outlets,
HORIZONTAL/ VERTICAL BED HEAD PANEL (CE marked) Horizontal/ Vertical Bed Head Panel (CE marked)- 1500mm for upto 4/5outlets configuration along with electrical switches. It shall confirm to HTM 02-01/ NFPA 99/EN/DIN/ISO 7396-1. The design shall be approved by the respective institute before installation and it is responsibility of the bidder after getting order they have to discuss with respective hospital authority and finalized the Bed Head Panel (Vertical/Horizontal) as per site condition. - Efficient, Safe & Robust design in extruded aluminium section. - Smooth curved surfaces, and choice of base colour and fascia plates. - Unit should have integrated rail system to mount accessories - The headwall system should be constructed of aluminium extrusions joined together to form a carcass to suit the particular application. Unit should be factory assembled for electrical and mechanical components. - Segregation of services i.e. Low voltage supplies, High Voltage supply and Medical gases should be maintained with minimum 2 tier/2 channel arrangements. - Front fascia plate should be removable individually to access for respective service. - It should have one rail for mounting Accessories. - Each bed-head unit shall be supplied with electrical and electrical outlets pre-fitted. Gas Outlets, Electrical sockets and others accessories configuration as follows for 1500mm Bed head trunking: 1. O2 x 1/2 2. Air x 1 3. Vac x 1/2 4. 5 /15A combined Electrical socket with switch- 4 nos. 5. Vacuum Jar holder- 1 no. 6. Cut out/provisin for Nurse call bell 7. RJ45 socket/Ethernet-1 8. SS Basket.
HORIZONTAL/ VERTICAL BED HEAD PANEL (CE marked) Horizontal/ Vertical Bed Head Panel (CE marked)- 1800mm for 6/8 Outlet configurations along with electrical switches. It shall confirm to HTM 02-01/ NFPA 99/EN/DIN/ISO 7396-1. The design shall be approved by the respective institute before installation and it is responsibility of the bidder after getting order they have to discuss with respective hospital authority and finalized the Bed Head Panel (Vertical/Horizontal) as per site condition. - Efficient, Safe & Robust design in extruded aluminium section. - Smooth curved surfaces, and choice of base colour and fascia plates. - Unit should have integrated rail system to mount accessories - The headwall system should be constructed of aluminium extrusions joined together to form a carcass to suit the particular application. Unit should be factory assembled for electrical and mechanical components. - Segregation of services i.e. Low voltage supplies, High Voltage supply and Medical gases should be maintained with minimum 2 tier/2 channel arrangements. - Front fascia plate should be removable individually to access for respective service. - It should have one rail for mounting Accessories. - Each bed-head unit shall be supplied with electrical and electrical outlets pre-fitted. Gas Outlets, Electrical sockets and others accessories configuration as follows for 1800mm Bed head trunking: 1. O2 x 2 2. MA x 2 3. Vac x 2 4. 5 /15A combined Electrical socket with switch- 8 nos. 5. Vacuum Jar holder- 1 no. 6. Cut out/provisin for Nurse call bell 7. RJ45 socket/Ethernet-1 8. SS Basket
Single arm Celling Pendent for the O.T. as per technical specification :Single Arm Pendant for Operation Theatre CE Marked, Multimovement Pendent shall be new design motorized Single arm(900mm) with up & down movement of 515 mm and load carrying capacity of 100-150 kg. The arm should rotated upto 330º- 340ºwith adjustable stopper. An extremely quite electric motor should reduce noise to a minimum, dampened stoppers and very low hand forces for horizontal movements should contribute to an ergonomically optimised workplace. The pneumatic brake system should adapted to various safety requirements and construction facilities. Modern and very quite, high performance motors shall well special spindles shall be used to realize precise & steady movement. As a safety feature the motor shall equipped with an over load protection. The large interior cross section for supply lines offers shall completely new applications with 120 mm diameter. The stoppers shall be infinitely variable from 0-330º-340º "service head shall be provided with the modular design to achieve maximum supply with minimum required space.service head should designed to host, Base, Gas Module, Electric Module and shelves . Upto 8 Gas outlets & 10 Electrical switches. Racks & shelves shall be provided to mount the equipments like monitor etc. The total length of the manager shall be 800mm. pendent shall be have 1 arms with shelves as per following details: a. Horizontal arm system - 1 b. Weight carrying capacity - 100-150 kg c. 5/15 Amp. Electrical sockets without switches - 8 to 10 Nos. d.Shelfs with side rails - 2 Nos. e.Provision to fix Gas outlets(i.e.) as per distribution chart f. Gas interface set for interface plate - 1 g.Ceiling mounting system for interin ceiling upto 1000 - 1 h. Interface plate with electrical fittings - 1 i. Ceiling cover for interin ceiling - 1
Double arm Ceilling Pendent for the O.T. as per technical specfication : Swievel Double arm Surgeon Pendent CE Marked Multimovement Pendent is a new design motorized (1000+800) arm with up & down movement of 515 mm and load carrying capacity of 80 kg. The arm can be rotated upto 330º- 340ºwith adjustable stopper. An extremely quite electric motor reduces noise to a minimum, dampened stoppers and very low hand forces for horizontal movements contribute to an ergonomically optimised workplace. The newly developed pneumatic brake system can be adapted to various safety requirements and construction facilities. Modern and very quite, high performance motors as well special spindles are used to realise precise & steady movement. As a safety feature the motor is equipped with an over load protection. The large interior cross section for supply lines offers completely new applications with 120 mm diameter. The stoppers are infinitely variable from 0-330º-340º "service head is provided with the modular design in shape to achieve maximum supply with minimum required space.service head is designed to hosts, Base, Gas Module, Electric Module and shelves . Upto 8 Gas outlets & 10 Electrical switches. Racks & shelves are provided to mount the equipments like monitor etc. The total length of the manager is 1000mm. Surgeon pendent will have 2 arms with shelves as per following details: a. Horizontal arm system - 2 b. Weight carrying capacity - 80kg c. 5/15 Amp. Electrical sockets without switches - 8Nos. d.Shelfs with side rails - 2 Nos. e.Provision to fix Gas outlets(i.e.) Oxygen- 2, Vaccum- 2, Air 4 bar-1, Air 7 bar-1 & WAGD-1 no. f. Gas interface set for interface plate - 1 g.Ceiling mounting system for interin ceiling upto 1000 - 1 h. Interface plate with electrical fittings - 1 i. Ceiling cover for interin ceiling - 1
Supply installation testing and commissioning of MEDICAL LINE VALVE, AS PER CE CERTIFIED / UL LISTED AS PER TECHNICAL SPECIFICATIONS : MEDICAL LINE VALVE, AS PER BS EN 1057 STANDRADS AS PER TECHNICAL SPECIFICATIONS ISOLATING VALVE RB/RN/SIM/AUDCO All ball valves as per BS 1057 are rated at 400 psig, as well as full vacuum ( 29.9" Hg). Valves go from full ON to full OFF by turning the vinyl-gripped valve handle 90 degree Locking-type handles may be ordered separately when required. Copper tubing is factory installed to help prevent valve seat damage during soldering. main and riser valves are not required to be installed in a box unless specially noted or required.
(i) 15mm OD
(ii) 22mm OD
(iii) 28mm OD
(iv) 42mmOD
(v) 54mmOD
(BOQ Schedule 'A' Part-XXX). MECHANICAL LAUNDARY PLANT.
(i) 25Kg Capacity side loading machine Supply, Installation , testing & commisioning of 25Kg Capacity, side loading machine (slucing machine ), steam heated : TECHNICAL SPECIFICATION FOR HEAVY DUTY WASHING MACHINE • The machine shall be Side Loading type, 25 Kg Capacity dry weight filling per charge, single Compartment. • The inner basket shall be made of stainless steel SS 304 quality with minimum thickness of 18 SWG and outer basket shall be made of stainless steel SS 304 quality with minimum thickness of 16 SWG. • Inside basket door shall be provided with double locking arrangements of latches. First lock by spring action and second by turning ‘T’ bolt in clockwise direction. • The minimum Inner Basket Dimensions shall be 700 mm Dia x 960 mm length, to a corresponding minimum volume of 415 litres. • Wash Motor shall be minimum of .75 kw on 415v, 3Phase, 50c/s, A.C. • Forward and reverse timer to be provided to allow the basket to rotate in forward direction for few rotations and automatically in reverse direction for few rotations to avoid tangling of linen inside the machine and for a better wash • A motor drives shall be through set of multiple pulleys and ‘V’ belts. • The machine shall perform pre-wash, wash with soap solution and rinsing cycles • The machine shall be fitted with Digital temperature controller to cut off heaters at the preset temperature automatically. • The door shall be interlocked electrically to ensure that the electrical drive system do not function until the door is firmly closed. • The machine shall not START if the door is left open. • The inside basket doors shall have spring lock. • An overflow arrangement shall prevent the machine from flooding with water. • Thermal overload relay should cut off the supply to motor during overloading. • The manufacturer should have ISO 9001: 2015 quality management system • The supplier should agree for demonstration of the quoted model, if needed by the end user.
(ii) 50 Kg Capacity side loading machine Supply , Installation , testing & commisioning of 50Kg Capacity, side loading washing machine, steam heated. :TECHNICAL SPECIFICATION FOR HEAVY DUTY WASHING MACHINE • The machine shall be Side Loading type, 50 Kg Capacity dry weight filling per charge, single Compartment. • The inner basket shall be made of stainless steel SS 304 quality with minimum thickness of 18 SWG and outer basket shall be made of stainless steel SS 304 quality with minimum thickness of 16 SWG. • Inside basket door shall be provided with double locking arrangements of latches. First lock by spring action and second by turning ‘T’ bolt in clockwise direction. • The minimum Inner Basket Dimensions shall be 1130 mm Dia x 910 mm length, to a corresponding minimum volume of 735 litres. • Wash Motor shall be minimum of 2.2 kw on 415v, 3Phase, 50c/s, A.C. • Forward and reverse timer to be provided to allow the basket to rotate in forward direction for few rotations and automatically in reverse direction for few rotations to avoid tangling of linen inside the machine and for a better wash • A motor drives shall be through set of multiple pulleys and ‘V’ belts. • The machine shall perform pre-wash, wash with soap solution and rinsing cycles • The machine shall be fitted with Digital temperature controller to cut off heaters at the preset temperature automatically. • The door shall be interlocked electrically to ensure that the electrical drive system do not function until the door is firmly closed. • The machine shall not START if the door is left open. • The inside basket doors shall have spring lock. • An overflow arrangement shall prevent the machine from flooding with water. • Thermal overload relay should cut off the supply to motor during overloading. • The manufacturer should have ISO 9001: 2015 quality management system • The supplier should agree for demonstration of the quoted model, if needed by the end user
(iv) 50Kg capacity End Loading drying tumbler Supply , Installation , testing & commisioning of 50Kg capacity, End Loading drying tumbler : TECHNICAL SPECIFICATION FOR HEAVY DUTY DRYING TUMBLER • The machine shall be End Loading type Drying tumbler, 50Kg Capacity dry weight filling per charge • The minimum dimensions of the Inner Basket shall be 1220mm dia x 965mm depth, corresponding to a minimum volume of 1150 litres • The inner basket shall be made of stainless steel SS 304 quality with minimum thickness of 16SWG. • The outer cover shall be made of Mild steel with powder coated with minimum thickness of 16SWG. • Motor for drive and exhaust shall be minimum of 3.5 HP capacity • The outer basket shall house an operating control panel with digital temperature controller, timer, push buttons etc. for main supply. • The machine shall be provided with suitable steam radiotor and to be fitted at the top of outer basket and is designed for maximum utilisation of heat. • Forward and reverse timer to be provided to allow the basket to rotate in forward direction for few rotations and automatically in reverse direction for few rotations to avoid tangling of linen inside the machine and for a better drying • Power Supply: 415v, 3Phase, 50c/s, A.C. Supply. • Self cleaning lint screen of ample size, shall be provided • A timer for automatic forward-reverse rotation of drive motor is provided in the control panel. • Auto timed by digital timer with illuminated display of lapse time. • The machine shall be stop automatically at the end of preset time thus ensuring correct use of dryer. • Auto-reverse prevents entanglement of linen also ensures faster drying. • Electrical interlocking of door for drive. • Dynamically balanced aluminium impeller fan directly mounted on motor shaft. • The manufacturer should have ISO 9001: 2015 quality management system • The supplier should agree for demonstration of the quoted model, if needed by the end user.
(v) Calendaring machine Supply, Installation, testing & commisioning of Calendaring machine, Single roll, Electrically Heated, 375mm x 1830mm : TECHNICAL SPECIFICATION FOR SINGLE ROLL FLAT WORK IRONER (CALENDERING MACHINE) • For pressing of bed sheet, pillow cover, etc. • The machine shall be Single Roll, Calendaring Machine, feeding & delivery on opposite sides. • Pneumatic lifting through Air compressor with pressure 8Kg/cm2 and 3 CFM. • The minimum roll size shall be 375mm dia x 1830mm long, • Speed of rolls shall be 3 to 6 mtrs./minute.; • Should have Drive and Exhaust Motor • Electrical Heater Load: 14.4 KW on 415/440 V AC, 3 phase. • Two fixed speed / variable speed drive shall be provided • Roll/s padded with multi layers of Stainless steel Wool & covered with two rounds of Polyester cloth. Stainless steel wool padding ensures longer life of padding & reduces the down-time. Also, it maintains porosity for efficient removal of moisture ensuring wrinkle free ironing. • Each roll is provided with separate Exhaust Blower Dynamically balanced aluminium impeller mounted directly on motor shaft. • Metal powder coated Feeding tray & Delivery Table of ample sizes shall be provided. • Full length Finger Guard is electrically interlocked with drive & pneumatic system. • The Frame is well protected against corrosion. The Chest is rigidly fixed on the frame with fasteners. The Steam Chamber of the chest has a multi- pass arrangement, which ensures fast and uniform heating of the ironing surface of the chest. • The padding shall be designed to provide elasticity and hardness to the rolls and thus ensuring even pressing of flat linen. • The pneumatic control system consists of air filter, regulator, lubricator, pressure gauge, solenoid valves and quick exhaust valves. • Finger guard shall protects the operator`s fingers from getting crushed between the roller and the chest. The slightest disturbance of the finger guard stops the drive to the rollers and lifts both the rollers away from the chest. • During operation if power supply fails the rollers lift away from the chest automatically thus protecting the cloths and the roller covers from getting scorched. • The machine can not iron without compressed air supply ensuring that the safety system is in operation whenever the machine is used for ironing. • Separate safety pawls are provided for each roller which locks the rollers in the lifted position whenever the power fails and both rollers remain in locked/lifted position even without air after that.
(vi) Flat Bed press Supply , Installation , testing & commisioning of Flat Bed press, 1500x750 : TECHNICAL SPECIFICATION FOR FLAT BED PRESS • For pressing of trousers, pants, flat linen etc. • The head opening shall be Pneumatic through Air compressor with pressure 6Kg/cm2 and 3 CFM. • Size of buck 1500mm x 750mm (60”x30”). • Electric Connected load: 10.8 KW on 3 phase 4 wires, 440V AC supply; • The Frame shall be fitted with head, buck and levers. • The buck shall be padded with one layer of asbestos clothes, one layer of cotton knitted padding/two layers of blanket and covered with cotton cloth • Heating on both HEAD (Top plate) & BUCK (Bottom plate). • Head plate of Stainless Steel shall be Polished / buffed. • Both Head & Buck shall be insulated & covered with powder coated panels. • Head shall remain in UP/OPEN position even without AIR • Metal powder coated work table of ample size. • All panels shall be powder coated. • Air Filter, Air Pressure regulator with gauge , Lubricator & air inlet valve shall be provided. • The closure of the machine shall be done by pressing of the two hand levers to be provided in the front. The releasing of any of the levers will make the head to open thus ensuring the safety of the operator. • It shall have Pressure Adjusting Device, to suit the requirements of different kinds of fabrics or garments of varying thickness. The unit shall have self aligning system, to give even pressing to uneven thickness of garments • All operations pneumatic & Head closing by simultaneous pressing of two push buttons for operator's safety • Auto timed through Digital Timer --preset time on counter & lapse time by Illuminated display for automatic opening of Head as per preset time. • The manufacturer should have ISO 9001: 2015 quality management system • The supplier should agree for demonstration of the quoted model, if needed by the end user.
(vii) Table mounted Electric Hand Iron Supply, Installation, testing & commisioning of Table mounted Electric Hand Iron :TECHNICAL SPECIFICATION FOR ELECTRIC HAND IRON WITH TABLE • Heavy Duty electric hand Iron: 1KW • The electric hand iron shall be manufactured out of gun metal and cast iron. • Wooden top Table on structural steel frame work. • The manufacturer should have ISO 9001: 2015 quality management system.
(viii) Wet linen Trolley Supply, Installation, testing & commisioning of Wet linen Trolley GRANDIMPIANTI /CLEANCARE //MPS / NEMR /STERIS / GETTINGE : -TECHNICAL SPECIFICATION FOR WET LINEN TROLLEY Purpose: To transport / carry the wet linen Description: Complete stainless steel 304 Grade construction for long rust free life. Trolley sides have pressed ribs for extra strength. Corners would be rounded for easy movement and fitted with rubber bumpers to avoid any damage. These trolleys would be mounted with 4 Nos. swiveling type rubber wheels on ball bearings.; These trolleys have a perforated S.S. mesh at the bottom are fitted with a drain valve. The front two castors are fixed type and the rear two are of swivelling type.; Wheels: 4” dia Thread free castors Overall Size: 800mm Length x 600mm width x 710mm height The manufacturer should have ISO 9001: 2015 quality management system The supplier should agree for demonstration of the quoted model, if needed by the end user.
(ix) Dry linen Trolley Supply, Installation, testing & commisioning of Dry Linen Trolley : TECHNICAL SPECIFICATION FOR DRY LINEN TROLLEY Purpose : To carry the dry linen Description : Complete stainless steel 304 Grade construction for long rust free life. Trolley sides have pressed ribs for extra strength. Corners would be rounded for easy movement and fitted with rubber bumpers to avoid any damage. These trolleys would be mounted with 4 Nos. swiveling type rubber wheels on ball bearings., The trolley is designed for light weight, rugged and easy manoeuver. Four castors are provided in the frame.; Wheels: 4” dia Thread free castors Overall Size: 1000mm Length x 600mm width x 810mm height The manufacturer should have ISO 9001: 2015 quality management system The supplier should agree for demonstration of the quoted model, if needed by the end user.
(x) Finish Linen Rack Supply, Installation, testing & commisioning of Finish Linen Rack :TECHNICAL SPECIFICATION FOR FINISH LINEN STORAGE RACK • Floor mounted, storage rack with five nos. shelves are used to store the linen • Frame is fabricated of 40mm square Stainless steel 304 Grade pipes. • The legs are provided with adjustable nylon. Bullet feet. • The shelves are fabricated of 16 SWG Stainless Steel 304 Grade sheets ground polished to smooth surface. Edges are welded together & polished at corners. • Overall Size: 1830mm Length x 535mm Width x 1830mm Height • The manufacturer should have ISO 9001: 2015 quality management system • The supplier should agree for demonstration of the quoted model, if needed by the end user.
(xi) Air Compressure Supply , Installation , testing & commisioning of Air compressor, 3 HP : TECHNICAL SPECIFICATION FOR AIR COMPRESSOR • Air compressor with 160 litres tank • Motor capacity shall be 3 H.P. Air Compressors with Electric Motor, Electrical Switch Gear and Automatic Control System, Air Receiver, No-heat Air Dryer, Pressure Regulator, interconnecting piping with necessary valves and fittings thereof. Specifications: Capacity 14cfm at 8.5 kg/cm2 Drive Electric Motor 1(one) Nos. Capacity 3 HP. Speed 1440 rpm (syn.) Drive Belt drive Electricity supply 440 volt, 50 Hz. 3 phase Starter Star/Delta Control & Switchgear/ L & T with overload protection. Air Receiver 160 ltr Air Dryer 10 cfm
(xi) Steam Boiler 600 Kg Supply , Installation , testing & commisioning of Steam Boiler 600 Kg NON IBR The boiler should be of coil design Pressure switch should have one NO-NC point which indicates level of water in feed water tank Limit switch of the boiler should have NO-NC point which indicates blow down valve open and close Condition Tic of the boiler should have NO-NC point which indicates the temperature Boiler should start giving steam in less than 10 minutes time frame Boiler should have reverse flame design for high turbulence Boiler should be double jack design Boiler should have stainless steel inner shell The manufacturer should have ISO 9001:2015 quality management system The supplier should agree for demonstration of the quoted model , if need by the and user Design of the fabrication should be of reversible flame Evaporation capacity of the boiler should be 600kg/hr The working pressure of the boiler should be minimum 10.54 kg /cm 2 Boiler should have automatic water feeding with minimum capacity of 2 hp branded pump Mode of combustion in the boiler should be forced draught fully automatic Boiler should have the minimum efficiency of 90+_2% Coil pipe used in the boiler should be CS boiler tube, with the minimum thickness of 3.66mm Inner and outer drum of the boiler should have coil 3 pass design Boiler shell should have inner side of 75mm thickness insulation with SS sheet lining Top and bottom cover should have the minimum of 75 mm refractory lining Boiler should have chimney on the top side of the boiler and chimney should be fully insulated Diesel tank with minimum capacity of 200 litres and should have the feature of automatic feeding should be supplied by the supplier. Required chiney work for boiler is scope of work.
(xii) Vacuum Table Supply, Installation, testing & commisioning of Vacuum Table : vaccum ironing table heavy duty electric iron - 1kw the ironing table should have foam, cloth, antina, spring set, linen rack. table size should be minimum 30''*48''*50'' table motor should be of minimum 1hp with heavy blower on the top of motor for heavy suction the manufacturer should have ISO9001:2015 quality management system the supplier should agree for demonstration of the quoted model, if need by the and user.
(xiii) MTO dry cleaning 15 kg Supply , Installation , testing & commisioning of MTO dry cleaning 15 kg mto dry cleaning machine (15kg) the machine should have an inner drum of 15kg capacity inner drum of the machine should be of aisi 304 grade the machine should have a minimum of .37kw capacity the extracting motor should be of minimum 1.5kw capacity minimum inner drum size of the machine should be 700mm*470mm minimum inner drum volume should be 180ltrs machine should have minimum 3 filters for the maximum recovery of the fuel the manufacturer should have ISO 9001:2015 quality management system the supplier should agree for demonstration of the quoted model, if need by the and user.
(xiv) Marble table Supply, Installation, testing & commisioning of Marble table marble table heavy duty electric iron- 1kw table should be made of ss 304 in the bottom and marble surface tablesize should be minimum 30''*48''*50''the manufacturer should have ISO 9001:2015 quality management system the supplier should agree for demonstration of the quoted model, if need by the and user.
(BOQ Schedule 'A' Part-XXXI). (SPECIAL ITEMS) MODULAR OPERATION THEATRE Supply & Installation of Walls of SMS material as per specifications : Walls for Operating Area European CE marked, The framework made of upright ledgers and profiles made of 1.5mm thick galvanized steel sheet. They should folded structural steels with a suitable section for the loads. The structure components be joined together by means of coupling systems in order to create a solid reticular frame, able to support different infill panels of weight is up to 8 Kg/sq the “Z” upright forms the vertical part of the frame and be quipped with proper drilling of 32mm ( height partial drilling) suitable for the panel coupling without suing screws between the prights and edges of the panel there is a suitable PVC adhesive seal with a thickness firm of 3mm to ensure air and dust sealing. At the lower end of the upright an adjustment foot should allow the easy levelling of the structure and, the necessary compression of the ancharge between ceiling and floor. The ledgers should the elements that constitute the basic module of the structure. They should be inserted on the proper hooks by pressure between two uprights, Moreover some “U” profiles , to be placed in horizontal position on the upper and lower part of this structure, constitute its extension with a depth of 64mm together with the metal panels with a thickness of 18mm and the PVC adhesive seal. The structure can be provided with stiffening ledgers or profiles for sliding door fixing and other accessories according to needs. Total thickness of the partition wall:100mm Skin PANELS ( double wall 1 side-partition wall 2 sides): Module skin panels should have a height exceeding 3 mtrs up to a maximum of 3.5m from the floor and a width that should vary from a minimum of 280mm to a maximum of 1200mm”they can be made of different types of finishing; using solid surface material The panels should be made of solid surface material thick 3mm backed by structural panel thick 15mm consisting of a trapezoidal aluminium corrugated core glued between two flat of aluminium sheet. The Solid Mineral Surface (SMS) material should be dent free antibacterial & fire resistant. The Solid Mineral Surface (SMS) should not require any paint & should have in built antibacterial properties.
The material should be manufactured for about two third with aluminium hydroxide and a third with acrylic resin and natural pigments. The aluminium hydroxide should give the product a particular strength and the quality of the acrylic resin ensure should cleanliness, water resistance and colour stability over time. The material should have antibacterial activity (% reduction>99%). On the inner sides of the panels thee should slotted holes for their anchorage to the support hooks fixed to the structure uprights, This fastening system should allows obtaining all the following results: The panel should be self centring with consequent joint alignments between panel and panel, ensuring aesthetic balance. The connection between hook and panel should be designed so that the panel, due to its weight, is compressed against the PVC seals coating the entire structure helping to reduce noise transmission. The fixing system of the panels should ensures that there is no accidental breakway of the panel, even If it is subjected to stress for more safety and stability: The connection system should allows disassembling and assembling each panel without moving the others near it. Its flexibility the partition wall should satisfy all the inspection and /or the maintenance needs required by modern workplaces (for example electrical installations, hydraulic installations, medical gases etc.) all the panels can be removed over their entire length and on both sides. The lower part of the panel should be equipped with a profile prepared for the laying and the coupling of the horizontal skirtings that need to re enter with the respect to the panel. The inner angles (which are at 900) in operating rooms or in similar environments should made up of a panel without interruption of continuity that covers the angular area of the wall. The panel should characterized by a double specular folding at 135 0 ( or variable folding according to the requirements). All the panels should be drilled according to specific needs ( ex ventilation grids of the room) The panels should be perfectly sealed together by means of thermoplastic rubber gaskets inserted by pressure and free of projections. Properties & Features of Solid Mineral Surface Material .(1) Density g/cm3 1,7., (2)Hardness (Barcol) 60, (3) Water Absorption % 0,023, (4) Heat Expansion (1 x 10”in/in”/F) 2,1 (5) Ignition Test 38, (6) Tensil Strength, psi 6500, (7) Elongation At Yeld % 0,2, (8), Flexural Strength, 8ft;o,5lb 72D-79000, (9) Water Resistance, g/1000cycl Unbreakable, (10)Lustre Stable Resistance 0,05, (11) High Temperature Resistance Uninfluential, (12) Boiling Water Resistance Uninfluential, (13) Stain Resistance Uninfluential, (14) Chemical Resistance Uninfluential
Supply & Installation of Ceiling of as per specifications The hermetic suspended ceiling should be a loading structure in heavy gauge material forming the frid on which the ceiling panels (made of steel painted material). The modular grid, which can be 600 x 600 mm, or variable, allows the integration of sealed lighting fixtures, air anemostats and / or various service units. The variable module grid should make it possible to adapt the size of the ceiling module to match the equipment to be mounted. It should also allow the use of different module sizes within the same room.The grid should be formed of loading profiles, suspended from the ceiling slab, to which the crossbar profiles are secured by means of rigid mechanical couplings. The thus formed grid should be rigid and remains perfectly stable during all the subsequent site operations.The suspended ceiling should be hermetically sealed by means of silicon gasket application. The function of silicon sealing should be that of assuring an airtight environment in the room and eliminating cervices in which dust could accumulate. The gaskets to be made of non toxic silicon in compliance with regulations applicable to clean rooms - 01 LOT
Planair Ceiling (Plenum box – Air Diffuser) – as per technical specification : The filtering unit should be designed for the controlled diffusion of air filtered through absolute filters for application in hospital with installation in the ceiling above the operating area. 2)Made with panels and filter holding plenum box in stainless steel and frame in natural anodised aluminium. 3)External dimension minimum 2600x2000 should be made with 4 filters of minimum 1220x610 and 2 filters of minimum 915x610 mm. Max flow should be 6500 m3/hour. 4)The plenum box and diffuser should be made in AISI 304 stainless steel. 5)The plenum box of each filter holder should have all connected by a second plenum box in order to have only two connecting point for a easy installation. System should be complete with series of absolute filter providing H14 (EN1882) class filtration and a weighted efficiency of 99.999% in the following standard module: 6) Filter should be made with fire-proof glass microfiber filtering baffle, water repelling, heat sealed yarn. The sealant should bea bi-component polyurethane with a polyurethane seal bonded into a single piece. Range of employ: Maximum temperature 80 °C-Relative humidity 100%-∆Pt final suggested 600 Pa-∆Pt max 1000 Pa Dimension (mm) -915x610 , 1220x610 Normal flow rate (m3/h) -900, 1200 Filtering surface (m2)- 16.5, 22 Initial Dp at 0.45 m/s (Pa) - 120, 120 - 1 LOT
Double peripheral lights-Indigenous 08 Nos as per technical specification : Peripheral lights of size 600 x 600 mm will be provided with stepped finish aluminium reflector and will be of A class for use in clean room application. The peripheral light diffusers will be constructed from opal prismatic diffuser material in aluminium frames. Light will be generated from high frequency electronic ballast’s complete with colour corrected fluorescent tubes. The ceiling will incorporate supports to secure it to the main structural frame of the modular operating theatre. The laminar flow ceiling will be able to provide integrated lamp support system, ease of maintenance and long life system. Control equipment for the peripheral lighting will be provided in the theatre control panel to allow independent control of the lighting levels by the surgical team.The operation procedures can never be affected by shadows, shimmering lights and dazzling eyes. This has been achieved by the lighting system with sufficient illumination level at the wound site and to provide flicker less design lighting control system Controls for the peripheral lighting will be provided in the theatre control panel to allow independent control of the lighting levels by the surgical team.
Touch Surgeon Control Panel 01 Nos with screen not less 22 "as per technical specification 1) The Control panel can be configured to incorporate all the services that Operation Theatre staff required. 2) The connection between the surgeon control panel and the distribution board will be by a multiplexed system, providing a PWM signal on a two-core cable. 3) The panel will contain 6 services as follows: a). Time day clock b). Time Elapsed Clock c). Temperature & Humidity Indicator d). General/peripheral Lighting control e). Medical Gas Alarm Panel – upto 6 gases f) Hepa Filter status 3) All high voltage equipment is installed in a separate enclosure. 4) The remote cabinet will house the operating lamp transformers, mains failure relays, electrical distribution equipment and circuit protection equipment for all circuits within the operating theatre. 5) All internal wiring will terminate in connectors with screw and clamp spring connections of the Clip-on type mounted, on a DIN rail and labelled with indelible proprietary labels. 6) Individual fuses or miniature circuit breakers will protect all internal circuits. 7) All internal wires will be marked with plastic ferrule type cable markers, for ease of identification
X-ray Viewing Screen – 01 Nos, as per technical specification : The theatre will be equipped with a 2-plate X-Ray viewing screen. It will be designed to provide flicker free luminance for the film viewing purpose. It is installed flushed with the theatre wall for hygienic and ease of cleaning purpose. The X-Ray viewing screen is designed for the purpose of front access. The X-Ray viewing screen will be illuminated by 4 pieces of high frequency fluorescent lamps and the dimming will controlled by the usage of dimming ballast with Philips make rotary control. The diffuser is able to diffuse the light evenly and to provide enough luminance for film viewing. It is made of high quality opaque acrylic sheet. The film is held firmly by using spring-loaded clips for ease of mounting and demounting. The body is built by using electrolysed steel with powder coated to BS standards.
Static dissipative Flooring (Tile Form) – (cladding type OT) as per technical specification : The floor finish in the operating room will be 2mm Static dissipative PVC tiles, laid on a semi conductive adhesive base. The floor finish will terminate at the room perimeter passing over a concealed cove former and continuing up the wall for 100mm. Flooring will fulfil EN 649 of US requirements. It will have chemical resistance as per EN 423 . It will have electrical resistance conforming to EN 1081/IEC 61340. All joints will be welded and the plastic wall finish will overlap the floor coving by 25mm, to provide a continuous sealed surface.A floor screed will be provided, flat to within a tolerance of +/- 3mm over any 3-metre area. Onto this sub floor, a self-levelling compound will be laid prior to laying of the floor finish.The self-levelling compound will be of the type that does not promote bacteriological growth. Copper grounding strips (0.05mm thick, 50mm width) will b laid flat on the floor in the conductive adhesive and connect to copper wire of grounding - 01 LOT
Automatic Sliding Door – 01 Nos as per technical specification size 1500 x 2100 The door with its automation unit conforms to machine directive93/87/EC, low voltage directive73/23/EEC and 93/68/EEC and EMC directive 89/336/EEC and 92/31/EEC and 93/97/EEC. To maintain sterility and the correct air pressure in the department, all doors into and out of the operating theatre and ancillary rooms be of the sliding, hermetically sealing type. All sliding doors will be electrically operated. The doors will be constructed with high-density particle board cores, and high pressure laminate faced on both sidesThe cores will be set firmly in an aluminum frame, suitably sealed with a non-porous non-shedding gasket. The aluminum frames will contain the door seal. The door will seal on all four edges in the closed position. The door track will be constructed from an aluminum extrusion, fixed firmly to the walls. The doors will run on nylon wheels within track. The track and wheel design will be such that during the last 50 mm at travel on the closing cycle, the door moves in 3 directions to form a seal against the floor, at the bottom and against the frame on both sides and at the top.Nylon runner guides will be fixed to the floor in such a way that they do not obstruct trolley movement through the door.They will provide stability during the opening and closing cycles and assist in creating the necessary pressure at the bottom of the door to maintain the seal.Floor guides across the door opening, or doors with no floor guidance will not be considered.To ensure efficient sealing of the doors, the door manufacturer will provide the door frames. They will consist of reinforced plasterboard panels faced with the same laminate as the doors. The door frames will be edged with an aluminium extrusion and with concealed fixings that are adjustable during installation to ensure a 100% hermetic seal is achieved. Vision panels will be fitted to all doors. Automatic units will be of the single phase electronic type mounted directly to the door track. The units will consist of a computerized electronic controller and motor. The drive mechanism will be by heavy-duty steel reinforced toothed fabric belt. The controller will have the facility to individually set opening speeds, partials opening, closing speeds, time delays and a variety of locking and interlocking options, within factory preset limits. The door controller will also have the ability to sense additional loads on the door caused by any obstruction in its path and to automatically stop or reverse the direction of travel. The controller will be capable of either being operated by elbow switches/foot switches / Knee Switches/ key switches.All doors will be able to be operated easily manually in the event of failure of the power supply or the automation units
Automatic Sliding Door – 01 Nos as per technical specification size 1000 x 2100 The door with its automation unit conforms to machine directive93/87/EC, low voltage directive73/23/EEC and 93/68/EEC and EMC directive 89/336/EEC and 92/31/EEC and 93/97/EEC. To maintain sterility and the correct air pressure in the department, all doors into and out of the operating theatre and ancillary rooms be of the sliding, hermetically sealing type. All sliding doors will be electrically operated. The doors will be constructed with high-density particle board cores, and high pressure laminate faced on both sidesThe cores will be set firmly in an aluminum frame, suitably sealed with a non-porous non-shedding gasket. The aluminum frames will contain the door seal. The door will seal on all four edges in the closed position. The door track will be constructed from an aluminum extrusion, fixed firmly to the walls. The doors will run on nylon wheels within track. The track and wheel design will be such that during the last 50 mm at travel on the closing cycle, the door moves in 3 directions to form a seal against the floor, at the bottom and against the frame on both sides and at the top.Nylon runner guides will be fixed to the floor in such a way that they do not obstruct trolley movement through the door.They will provide stability during the opening and closing cycles and assist in creating the necessary pressure at the bottom of the door to maintain the seal.Floor guides across the door opening, or doors with no floor guidance will not be considered.To ensure efficient sealing of the doors, the door manufacturer will provide the door frames. They will consist of reinforced plasterboard panels faced with the same laminate as the doors. The door frames will be edged with an aluminium extrusion and with concealed fixings that are adjustable during installation to ensure a 100% hermetic seal is achieved. Vision panels will be fitted to all doors. Automatic units will be of the single phase electronic type mounted directly to the door track. The units will consist of a computerized electronic controller and motor. The drive mechanism will be by heavy-duty steel reinforced toothed fabric belt. The controller will have the facility to individually set opening speeds, partials opening, closing speeds, time delays and a variety of locking and interlocking options, within factory preset limits. The door controller will also have the ability to sense additional loads on the door caused by any obstruction in its path and to automatically stop or reverse the direction of travel. The controller will be capable of either being operated by elbow switches/foot switches / Knee Switches/ key switches.All doors will be able to be operated easily manually in the event of failure of the power supply or the automation units
Writing Board with magneting system 01Nos of size:- 1000x700x60mm Deep made out G.P Sheet to be flushed with the wall system complete set as per enclosed tender technical specificationsl. : One Operating List Board should be provided in each Operating Theatre and should be made of Ceramic Magnetic white board. Operating List Board should be flush mounted.
Cascade Pressure stabiliser 01 Nos having muliti 304 grade stainless steel blade to control the room air pressure : Pressure Relief Dampers should be provided in each room to prevent cross contamination of air from clean and dirty areas. Suitably sized air pressure relief damper should be strategically placed, enabling differential room pressure to be maintained and ensure that when doors are opened between clean and dirty area. Counter-weight balancing system should be provided in the PRD to maintain positive pressure inside the operation room. Air pressure stabilizers should have unique capability of controlling differential pressure to close tolerance. The PRD should remain closed at pressure below the set pressure and should open fully at pressure only fractionally above the threshold pressure.The body should be epoxy powder coated as per standard BS colors. First class electrolyzed steel plate should be used for body and with high grade SS304 Stainless Steel for bladders.
Storage unit 01 Nos of size 1666 x 865 x 350mm having two shelves & Stainless steel having 5mm thick glass door & mounted flush with the theatre wall. : The storage unit should be made with 1.50 mm thick EGP Zinc coated sheet panels. Storage Cabinet should be divided in two equal parts and each part should have individual glass doors with high quality locking system. Each part should be provided with racks.
View window 01 Nos of size 1000 mm x 1000mm with motorised blinds as per enclosed tender technical specifications.
DIGITAL DISPLAY TOUCH SCREEN 01 Nos of size not less then 30" (WORK STATION) with steel painted outer case as per enclosed tender technical specificationsl. Touch Surgeon Control Panel with screen not less 22 " ·Bidder must submit third party CE certification along with tender documents. Self attested certification not valid. ·The Control panel can be configured to incorporate all the services that Operation Theatre staff required. ·The connection between the surgeon control panel and the distribution board will be by a multiplexed system, providing a PWM signal on a two-core cable. The panel will contain 6 services as follows: . Time day clock . Time Elapsed Clock . Temperature & Humidity Indicator . General/peripheral Lighting control . Medical Gas Alarm Panel – upto 6 gases . Hepa Filter status . All high voltage equipment is installed in a separate enclosure. . The remote cabinet will house the operating lamp transformers, mains failure relays, electrical distribution equipment and circuit protection equipment for all circuits within the operating theatre. . All internal wiring will terminate in connectors with screw and clamp spring connections of the Clip-on type mounted, on a DIN rail and labelled with indelible proprietary labels. · Individual fuses or miniature circuit breakers will protect all internal circuits. · All internal wires will be marked with plastic ferrule type cable markers, for ease of identification.
Electrical Wiring inside OT - 01 Lot
OT Light: DOUBLE COMBINATION OT CEILING LIGHT WITH LED TECHNOLOGY marked as per technical specification enclosed :DOUBLE COMBINATION OT CEILING LIGHT WITH LED TECHNOLOGY – 01 Nos marked Approved should have the following Features: Two Major Dome/light head Single Colour Pure White LED,s Reflector based LED Technology Arrangement of LED in such a way that Shadow Free / Deep cavity illimination is achieved Special design to maximize the field of illumination and optimized illumination depth should have good laminar flow properties Easy and less time consumng service access of electronics on the light head dome surface Aluminium Housing for better heat management ESG safety glass for simple and fast disinfection process 360 deg rotation of domes/lightheads / arms for unlimited positioning of light heads MIS Lightning Feature on domes Technical Data of Light Heads: Major (2) Central Illumnination Ec (1mt) 160000 lux x 160000 lux Intensity Range (Lux) 30%-100% Life time of light source (h) >/= 50,000 Light Field Diameter (mm) 180-300 Depth of Field L1+L2 (mm) >/= 850 CRI (Ra) >/=96 R9 >/=96 Colour Temp(K) >/=4500 Rated Power Output less or equal to 65W at 24V DC Light Head Power Consumption 200 VA+/- 10% Radiant Energy around 3,4mW/m2lx Temp increase < 1 deg Power Supply-Primary Voltage(V AC) 90-240 Rotation 360 deg Operating Range >/= 1700 mm Adjustment of the spring arm >/ = 1175 mm Approx wt of each LH </= 18kg Specifications for Centrally Mounted Camera System Should have the following Features: To be mounted on central area of LH should have a wall mounted control Technical Data: Sensor : 1/4" Super HAD CCD ,Lines and Gaps: 768x576 Video standards: PAL Pixels: minimum 444000 Aspect Ratio: 4-3,16-9 Minimum Illumination: 1 Lux S/N Ratio >50 dB Minimum working distance: 10mm/Wide800mm/Tele Power Supply : via LH/ Max 12 W Video outputs: Y/C IT port: RS 232, Zoom 18x optical zoom,4x digital zoom f:4.1-73.8 mm Power Supply: via OR light, max.12 W Image stabilizer Yes Focus Automatic, manual Iris: Automatic, manual White balance: Automatic, manual Should be 30-32” High Definition Progressive Scan Flat-panel Medical Grade Monitors with ceiling mounted spring arm suspension to support high definition/HDTV progressive Scan images and should be able to support and display DVI/HDTV, RGBHV, S-Video, Composite video signals. Aspect ratio 16:9/16:10. Resolution – 1920X1080 or more The flat Panel suspension should be ready with the cables for integration of High Definition Digital (DVI/HDTV), RGBHV (High Resolution), SVHS (S-Video), Composite video signals to travel from the various sources of video like endoscopic camera, room camera, in light camera, high definition flat panel monitors, while assuring native resolution / signal.
OT Light HD Camera 01 Nos
OT Light monitor 01 Nos
OT Table - 01 Nos marked as per technical specification enclosed : 1. Product should be of international quality FDA & CE approved certified ISO 13485:2003 certified. 1. Product should be of international quality FDA & CE approved certified ISO 13485:2003 certified. 2. The five section table top should X-Ray translucent for fluoroscopy with c-arm with radiolucent mattress and facility to load X-Ray cassettes to the table. There should be no metal frame across especially between back and seat section. 3. With remote control the following positions should be possible. a. Table up and down b. Table top longitudinal sliding both cranially and caudially. The total sliding should be atleast 350 mm or better c. Side tilt / lateral left and right d. Trendlenburg and Reverse Trendlenburg. e. Back section up and down. f. Flex / Reflex positioning should be pre-programmed and therefore should be achievable by press of a single button. g. Powered Floors lock and unlock with manual emergency release. h. Auto levelling 4. Radiolucent five section table top in head section, back section, seat section with perineal cut and split leg section. 5. Inbuilt Battery backup about 80-100 operations during power failure 6. Should have Inbuilt override control fixed in the centre column. 7. All metal components of the table should make of aluminium or stainless steel SUS304 with at least two antistatic heavy duty castors. 8. Should have accessory rails on both sides to hold various accessories. 9. Should be suitable for patient load proof at least 270 kg. 10. Self compensating floor locking device. 11. The mattress should be a pressure management pad mattress with at least 80 mm thicknesses. 12.Safety :A. IEC 60601-1:- Medical electrical equipment-Part 1: General requirement for basic safety and essential. Perforation-Edition 3.1; B. IEC 60601-2-46:- Medical electrical equipment-Part 2-46: Particular requirements for the basic safety and Essential Performance-Collateral Standard: Usability-Edition 2.0 IEC 60601-1-6: Medical Electrical Equipment-Part 1-6: General Requirements for Basic Safety and Essential Performance-Collateral Standard Usability-Edition 2.0 Technical data • Height adjustment minimum should be 700 mm or lesser. • Side Tilt 20 deg or more • Back section adjustment 80 deg up and 40 deg down or more. • Leg section adjustment 15 deg up and 90 deg down or more. • Trendlenburg adjustment at least 30 deg. • Extendable head rest 60 deg up and 90 deg down. • Tabletop Width (w/o Side Rails) should be more than 500mm. • The table length (With Extendable head Plate) should be at least 2000mm • Powered longitudinal sliding – 350mm or more, should be possible both head side & leg side. Total long sliding should be more than 110 mm towards leg side and more than 230 mm on head side. Should be supplied with the following accessories: o Padded arm boards o Anaesthesia screen frame with clamps o Restrain strap o Leg crutches o Side rail clamp
MODULAR ICU Supply & Installation of Walls of SMS material as per specifications : Walls for Operating Area CE Marked / UL Listed marked, The FRAMEWORK should be made of upright ledgers and profiles entirely made of a galvanized steel sheet with a thickness of 1.5mm. They should folded structural steels with a suitable section for the loads. The structure components should be joined together by means of coupling systems in order to create a solid reticular frame, able to support different infill panels whose weight is up to 8 Kg/sq the “Z” upright forms the vertical part of the frame and should be quipped with proper drilling of 32mm ( height partial drilling) suitable for the panel coupling without suing screws between the prights and edges of the panel there is a suitable PVC adhesive seal with a thickness firm of 3mm to ensure air and dust sealing. At the lower end of the upright an adjustment foot should allow the easy levelling of the structure and, the necessary compression of the ancharge between ceiling and floor. The ledgers should the elements that constitute the basic module of the structure. They should be inserted on the proper hooks by pressure between two uprights, Moreover some “U” profiles , to be placed in horizontal position on the upper and lower part of this structure, constitute its extension with a depth of 64mm together with the metal panels with a thickness of 18mm and the PVC adhesive seal. The structure can be provided with stiffening ledgers or profiles for sliding door fixing and other ccessories according to needs. Total thickness of the partition wall:100mm Skin PANELS ( double wall 1 side-partition wall 2 sides): Module skin panels should have a height exceeding 3 mtrs up to a maximum of 3.5m from the floor and a width that should vary from a minimum of 280mm to a maximum of 1200mm”they can be made of different types of finishing; using solid surface material The panels should be made of solid surface material thick 3mm backed by structural panel thick 15mm consisting of a trapezoidal aluminium corrugated core glued between two flat of aluminium sheet. The Solid Mineral Surface (SMS) material should be dent free antibacterial & fire resistant. The Solid Mineral Surface (SMS) should not require any paint & should have in built antibacterial properties.
The material should be manufactured for about two third with aluminium hydroxide and a third with acrylic resin and natural pigments. The aluminium hydroxide should give the product a particular strength and the quality of the acrylic resin ensure should cleanliness, water resistance and colour stability over time. The material should have antibacterial activity (% reduction>99%). On the inner sides of the panels thee should slotted holes for their anchorage to the support hooks fixed to the structure uprights, This fastening system should allows obtaining all the following results: The panel should be self centring with consequent joint alignments between panel and panel, ensuring aesthetic balance. The connection between hook and panel should be designed so that the panel, due to its weight, is compressed against the PVC seals coating the entire structure helping to reduce noise transmission. The fixing system of the panels should ensures that there is no accidental breakway of the panel, even If it is subjected to stress for more safety and stability: The connection system should allows disassembling and assembling each panel without moving the others near it. Its flexibility the partition wall should satisfy all the inspection and /or the maintenance needs required by modern workplaces (for example electrical installations, hydraulic installations, medical gases etc.) all the panels can be removed over their entire length and on both sides. The lower part of the panel should be equipped with a profile prepared for the laying and the coupling of the horizontal skirtings that need to re enter with the respect to the panel. The inner angles (which are at 900) in operating rooms or in similar environments should made up of a panel without interruption of continuity that covers the angular area of the wall. The panel should characterized by a double specular folding at 135 0 ( or variable folding according to the requirements). All the panels should be drilled according to specific needs ( ex ventilation grids of the room) The panels should be perfectly sealed together by means of thermoplastic rubber gaskets inserted by pressure and free of projections. Properties & Features of Solid Mineral Surface Material .(1) Density g/cm3 1,7., (2)Hardness (Barcol) 60, (3) Water Absorption % 0,023, (4) Heat Expansion (1 x 10”in/in”/F) 2,1 (5) Ignition Test 38, (6) Tensil Strength, psi 6500, (7) Elongation At Yeld % 0,2, (8), Flexural Strength, 8ft;o,5lb 72D-79000, (9) Water Resistance, g/1000cycl Unbreakable, (10)Lustre Stable Resistance 0,05, (11) High Temperature Resistance Uninfluential, (12) Boiling Water Resistance Uninfluential, (13) Stain Resistance Uninfluential, (14) Chemical Resistance Uninfluential
Supply & Installation of Ceiling of as per specifications The hermetic suspended ceiling should be a loading structure in heavy gauge material forming the frid on which the ceiling panels (made of steel painted material). The modular grid, which can be 600 x 600 mm, or variable, allows the integration of sealed lighting fixtures, air anemostats and / or various service units. The variable module grid should make it possible to adapt the size of the ceiling module to match the equipment to be mounted. It should also allow the use of different module sizes within the same room.The grid should be formed of loading profiles, suspended from the ceiling slab, to which the crossbar profiles are secured by means of rigid mechanical couplings. The thus formed grid should be rigid and remains perfectly stable during all the subsequent site operations.The suspended ceiling should be hermetically sealed by means of silicon gasket application. The function of silicon sealing should be that of assuring an airtight environment in the room and eliminating cervices in which dust could accumulate. The gaskets to be made of non toxic silicon in compliance with regulations applicable to clean rooms - 01 Lot
Double peripheral lights-Indigenous 06 Nos, as per technical specification : Peripheral lights of size 600 x 600 mm will be provided with stepped finish aluminium reflector and will be of A class for use in clean room application.
X-ray Viewing Screen 01 Nos, as per technical specification : The theatre will be equipped with a 2-plate X-Ray viewing screen. It will be designed to provide flicker free luminance for the film viewing purpose. It is installed flushed with the theatre wall for hygienic and ease of cleaning purpose. The X-Ray viewing screen is designed for the purpose of front access. The X-Ray viewing screen will be illuminated by 4 pieces of high frequency fluorescent lamps and the dimming will controlled by the usage of dimming ballast with Philips make rotary control. The diffuser is able to diffuse the light evenly and to provide enough luminance for film viewing. It is made of high quality opaque acrylic sheet. The film is held firmly by using spring-loaded clips for ease of mounting and demounting. The body is built by using electrolysed steel with powder coated to BS standards.
Touch Surgeon Control Panel with screen not less 22 "– 01 Nos, as per technical specification 1) The Control panel can be configured to incorporate all the services that Operation Theatre staff required. 2) The connection between the surgeon control panel and the distribution board will be by a multiplexed system, providing a PWM signal on a two-core cable. 3) The panel will contain 6 services as follows: a). Time day clock b). Time Elapsed Clock c). Temperature & Humidity Indicator d). General/peripheral Lighting control e). Medical Gas Alarm Panel – upto 6 gases f) Hepa Filter status 3) All high voltage equipment is installed in a separate enclosure. 4) The remote cabinet will house the operating lamp transformers, mains failure relays, electrical distribution equipment and circuit protection equipment for all circuits within the operating theatre. 5) All internal wiring will terminate in connectors with screw and clamp spring connections of the Clip-on type mounted, on a DIN rail and labelled with indelible proprietary labels. 6) Individual fuses or miniature circuit breakers will protect all internal circuits. 7) All internal wires will be marked with plastic ferrule type cable markers, for ease of identification.
Static dissipative Flooring (Tile Form) as per technical specification : The floor finish in the operating room will be 2mm Static dissipative PVC tiles, laid on a semi conductive adhesive base. The floor finish will terminate at the room perimeter passing over a concealed cove former and continuing up the wall for 100mm. Flooring will fulfil EN 649 of US requirements. It will have chemical resistance as per EN 423 . It will have electrical resistance conforming to EN 1081/IEC 61340. All joints will be welded and the plastic wall finish will overlap the floor coving by 25mm, to provide a continuous sealed surface.A floor screed will be provided, flat to within a tolerance of +/- 3mm over any 3-metre area. Onto this sub floor, a self-levelling compound will be laid prior to laying of the floor finish.The self-levelling compound will be of the type that does not promote bacteriological growth. Copper grounding strips (0.05mm thick, 50mm width) will b laid flat on the floor in the conductive adhesive and connect to copper wire of grounding - 01 Lot
Automatic Sliding Door - 01 Nos, as per technical specification size 1500 x 2100mm The door with its automation unit conforms to machine directive93/87/EC, low voltage directive73/23/EEC and 93/68/EEC and EMC directive 89/336/EEC and 92/31/EEC and 93/97/EEC. To maintain sterility and the correct air pressure in the department, all doors into and out of the operating theatre and ancillary rooms be of the sliding, hermetically sealing type. All sliding doors will be electrically operated. The doors will be constructed with high-density particle board cores, and high pressure laminate faced on both sidesThe cores will be set firmly in an aluminum frame, suitably sealed with a non-porous non-shedding gasket. The aluminum frames will contain the door seal. The door will seal on all four edges in the closed position. The door track will be constructed from an aluminum extrusion, fixed firmly to the walls. The doors will run on nylon wheels within track. The track and wheel design will be such that during the last 50 mm at travel on the closing cycle, the door moves in 3 directions to form a seal against the floor, at the bottom and against the frame on both sides and at the top.Nylon runner guides will be fixed to the floor in such a way that they do not obstruct trolley movement through the door.They will provide stability during the opening and closing cycles and assist in creating the necessary pressure at the bottom of the door to maintain the seal.Floor guides across the door opening, or doors with no floor guidance will not be considered.To ensure efficient sealing of the doors, the door manufacturer will provide the door frames. They will consist of reinforced plasterboard panels faced with the same laminate as the doors. The door frames will be edged with an aluminium extrusion and with concealed fixings that are adjustable during installation to ensure a 100% hermetic seal is achieved. Vision panels will be fitted to all doors. Automatic units will be of the single phase electronic type mounted directly to the door track. The units will consist of a computerized electronic controller and motor. The drive mechanism will be by heavy-duty steel reinforced toothed fabric belt. The controller will have the facility to individually set opening speeds, partials opening, closing speeds, time delays and a variety of locking and interlocking options, within factory preset limits. The door controller will also have the ability to sense additional loads on the door caused by any obstruction in its path and to automatically stop or reverse the direction of travel. The controller will be capable of either being operated by elbow switches/foot switches / Knee Switches/ key switches.All doors will be able to be operated easily manually in the event of failure of the power supply or the automation units
Writing Board with magneting system Size:- 1000x700x60mm deep 01 Nos made out G.P Sheet to be flushed with the wall system complete set as per enclosed tender technical specificationsl. One Operating List Board should be provided in each Operating Theatre and should be made of Ceramic Magnetic white board. Operating List Board should be flush mounted.
Cascade Pressure stabiliser 01 Nos having muliti 304 grade stainless steel blade to control the room air pressure : Pressure Relief Dampers should be provided in each room to prevent cross contamination of air from clean and dirty areas. Suitably sized air pressure relief damper should be strategically placed, enabling differential room pressure to be maintained and ensure that when doors are opened between clean and dirty area. Counter-weight balancing system should be provided in the PRD to maintain positive pressure inside the operation room. Air pressure stabilizers should have unique capability of controlling differential pressure to close tolerance. The PRD should remain closed at pressure below the set pressure and should open fully at pressure only fractionally above the threshold pressure.The body should be epoxy powder coated as per standard BS colors. First class electrolyzed steel plate should be used for body and with high grade SS304 Stainless Steel for bladders.
Srorage unit 02 Nos of size 1666 x 865 x 350mm having two shelves & Stainless steel having 5mm thick glass door & mounted flush with the theatre wall. The storage unit should be made with 1.50 mm thick EGP Zinc coated sheet panels. Storage Cabinet should be divided in two equal parts and each part should have individual glass doors with high quality locking system. Each part should be provided with racks.
ICU Ceiling Pendent 01 No CE Marked / UL Listed : The supply unit will meet the high standards for a safe and reliable operation in the ICU. The supply unit will have upgrading capability of new functions for adaptation to future requirements. All surfaces will be resistant against corrosion and disinfectants. Colour of painted surfaces: RAL 9002 The functional units of the supply unit will be completely assembled and tested by the manufacturer. Ergonomic, optimized supply unit consisting of the following functional units: Pendant should had electrical / Pneumatic brakes Ceiling fixture set for installation to concrete ceiling structure. Ceiling interface for connection of supply unit with electrics and gases delivered from site. Media columns of 800 mm with Provision for terminal units for medical gas supply/gas evacuation, (5 nos), high- and low voltage power supply (10Nos) Workstation components such as shelves (nos), drawers (1 Nos), & one IV rod of 800mm for mounting Syringe pumps • The above shelf could be adequate enough to mount 15” screen Multipara monitor of 15 Kg • The below shelf could be adequate enough to mount ventilator • The drawer will be equivalent to shelf size. Will have central rotation facility (Swivel range) at least 3300 Complete unit including intermediate ceiling construction and installation. The previously mentioned functional units will be coordinated mechanically, functionally and ergonomically, thus presenting a complete medical supply unit. Finished floor to bottom edge of suspended ceiling will be 800 mm.
Supply & Installation of partion of curtain with IV track at each bed - 01 Lot
Electrical work inside room, wiring, switches etc and air conditioning not included in items here-in-before to be supply and fix - 01 Lot
MODULAR LABOUR ROOM Supply & Installation of Walls of SMS material as per specifications : Walls for Operating Area imported European CE marked. The framework be made of upright ledgers and profiles entirely made of a galvanized steel sheet with a thickness of 1.5mm. They should folded structural steels with a suitable section for the loads. The structure components should be joined together by means of coupling systems in order to create a solid reticular frame, able to support different infill panels whose weight is up to 8 Kg/sq the “Z” upright forms the vertical part of the frame and should be quipped with proper drilling of 32mm ( height partial drilling) suitable for the panel coupling without suing screws between the prights and edges of the panel there is a suitable PVC adhesive seal with a thickness firm of 3mm to ensure air and dust sealing. At the lower end of the upright an adjustment foot should allow the easy levelling of the structure and, the necessary compression of the ancharge between ceiling and floor. The ledgers should the elements that constitute the basic module of the structure. They should be inserted on the proper hooks by pressure between two uprights, Moreover some “U” profiles , to be placed in horizontal position on the upper and lower part of this structure, constitute its extension with a depth of 64mm together with the metal panels with a thickness of 18mm and the PVC adhesive seal. The structure can be provided with stiffening ledgers or profiles for sliding door fixing and other ccessories according to needs. Total thickness of the partition wall:100mm Skin PANELS ( double wall 1 side-partition wall 2 sides): Module skin panels should have a height exceeding 3 mtrs up to a maximum of 3.5m from the floor and a width that should vary from a minimum of 280mm to a maximum of 1200mm”they can be made of different types of finishing; using solid surface material The panels should be made of solid surface material thick 3mm backed by structural panel thick 15mm consisting of a trapezoidal aluminium corrugated core glued between two flat of aluminium sheet. The Solid Mineral Surface (SMS) material should be dent free antibacterial & fire resistant. The Solid Mineral Surface (SMS) should not require any paint & should have in built antibacterial properties - 01 Nos
The material should be manufactured for about two third with aluminium hydroxide and a third with acrylic resin and natural pigments. The aluminium hydroxide should give the product a particular strength and the quality of the acrylic resin ensure should cleanliness, water resistance and colour stability over time. The material should have antibacterial activity (% reduction>99%). On the inner sides of the panels thee should slotted holes for their anchorage to the support hooks fixed to the structure uprights, This fastening system should allows obtaining all the following results: The panel should be self centring with consequent joint alignments between panel and panel, ensuring aesthetic balance. The connection between hook and panel should be designed so that the panel, due to its weight, is compressed against the PVC seals coating the entire structure helping to reduce noise transmission. The fixing system of the panels should ensures that there is no accidental breakway of the panel, even If it is subjected to stress for more safety and stability: The connection system should allows disassembling and assembling each panel without moving the others near it. Its flexibility the partition wall should satisfy all the inspection and /or the maintenance needs required by modern workplaces (for example electrical installations, hydraulic installations, medical gases etc.) all the panels can be removed over their entire length and on both sides. The lower part of the panel should be equipped with a profile prepared for the laying and the coupling of the horizontal skirtings that need to re enter with the respect to the panel. The inner angles (which are at 900) in operating rooms or in similar environments should made up of a panel without interruption of continuity that covers the angular area of the wall. The panel should characterized by a double specular folding at 135 0 ( or variable folding according to the requirements). All the panels should be drilled according to specific needs ( ex ventilation grids of the room) The panels should be perfectly sealed together by means of thermoplastic rubber gaskets inserted by pressure and free of projections. Properties & Features of Solid Mineral Surface Material .(1) Density g/cm3 1,7., (2)Hardness (Barcol) 60, (3) Water Absorption % 0,023, (4) Heat Expansion (1 x 10”in/in”/F) 2,1 (5) Ignition Test 38, (6) Tensil Strength, psi 6500, (7) Elongation At Yeld % 0,2, (8), Flexural Strength, 8ft;o,5lb 72D-79000, (9) Water Resistance, g/1000cycl Unbreakable, (10)Lustre Stable Resistance 0,05, (11) High Temperature Resistance Uninfluential, (12) Boiling Water Resistance Uninfluential, (13) Stain Resistance Uninfluential, (14) Chemical Resistance Uninfluential
Supply & Installation of Ceiling of as per specifications The hermetic suspended ceiling should be a loading structure in heavy gauge material forming the frid on which the ceiling panels (made of steel painted material Imported). The modular grid, which can be 600 x 600 mm, or variable, allows the integration of sealed lighting fixtures, air anemostats and / or various service units. The variable module grid should make it possible to adapt the size of the ceiling module to match the equipment to be mounted. It should also allow the use of different module sizes within the same room.The grid should be formed of loading profiles, suspended from the ceiling slab, to which the crossbar profiles are secured by means of rigid mechanical couplings. The thus formed grid should be rigid and remains perfectly stable during all the subsequent site operations.The suspended ceiling should be hermetically sealed by means of silicon gasket application. The function of silicon sealing should be that of assuring an airtight environment in the room and eliminating cervices in which dust could accumulate. The gaskets to be made of non toxic silicon in compliance with regulations applicable to clean rooms - 01 Lot.
Double peripheral lights-Indigenous – 06 Nos as per technical specification : Peripheral lights of size 600 x 600 mm will be provided with stepped finish aluminium reflector and will be of A class for use in clean room application.
X-ray Viewing Screen 01 Nos as per technical specification :The theatre will be equipped with a 2-plate X-Ray viewing screen. It will be designed to provide flicker free luminance for the film viewing purpose. It is installed flushed with the theatre wall for hygienic and ease of cleaning purpose. The X-Ray viewing screen is designed for the purpose of front access. The X-Ray viewing screen will be illuminated by 4 pieces of high frequency fluorescent lamps and the dimming will controlled by the usage of dimming ballast with Philips make rotary control. The diffuser is able to diffuse the light evenly and to provide enough luminance for film viewing. It is made of high quality opaque acrylic sheet. The film is held firmly by using spring-loaded clips for ease of mounting and demounting. The body is built by using electrolysed steel with powder coated to BS standards.
Touch Surgeon Control Panel 01 Nos with screen not less 22 "– as per technical specification 1) The Control panel can be configured to incorporate all the services that Operation Theatre staff required. 2) The connection between the surgeon control panel and the distribution board will be by a multiplexed system, providing a PWM signal on a two-core cable. 3) The panel will contain 6 services as follows: a). Time day clock b). Time Elapsed Clock c). Temperature & Humidity Indicator d). General/peripheral Lighting control e). Medical Gas Alarm Panel – upto 6 gases f) Hepa Filter status 3) All high voltage equipment is installed in a separate enclosure. 4) The remote cabinet will house the operating lamp transformers, mains failure relays, electrical distribution equipment and circuit protection equipment for all circuits within the operating theatre. 5) All internal wiring will terminate in connectors with screw and clamp spring connections of the Clip-on type mounted, on a DIN rail and labelled with indelible proprietary labels. 6) Individual fuses or miniature circuit breakers will protect all internal circuits. 7) All internal wires will be marked with plastic ferrule type cable markers, for ease of identification.
Static dissipative Flooring (Tile Form) 01 Nos as per technical specification : The floor finish in the operating room will be 2mm Static dissipative PVC tiles, laid on a semi conductive adhesive base. The floor finish will terminate at the room perimeter passing over a concealed cove former and continuing up the wall for 100mm. Flooring will fulfil EN 649 of US requirements. It will have chemical resistance as per EN 423 . It will have electrical resistance conforming to EN 1081/IEC 61340. All joints will be welded and the plastic wall finish will overlap the floor coving by 25mm, to provide a continuous sealed surface.A floor screed will be provided, flat to within a tolerance of +/- 3mm over any 3-metre area. Onto this sub floor, a self-levelling compound will be laid prior to laying of the floor finish.The self-levelling compound will be of the type that does not promote bacteriological growth. Copper grounding strips (0.05mm thick, 50mm width) will b laid flat on the floor in the conductive adhesive and connect to copper wire of grounding
Automatic Sliding Door 01 Nos as per technical specification size 1500 x 2100 The door with its automation unit conforms to machine directive93/87/EC, low voltage directive73/23/EEC and 93/68/EEC and EMC directive 89/336/EEC and 92/31/EEC and 93/97/EEC. To maintain sterility and the correct air pressure in the department, all doors into and out of the operating theatre and ancillary rooms be of the sliding, hermetically sealing type. All sliding doors will be electrically operated. The doors will be constructed with high-density particle board cores, and high pressure laminate faced on both sidesThe cores will be set firmly in an aluminum frame, suitably sealed with a non-porous non-shedding gasket. The aluminum frames will contain the door seal. The door will seal on all four edges in the closed position. The door track will be constructed from an aluminum extrusion, fixed firmly to the walls. The doors will run on nylon wheels within track. The track and wheel design will be such that during the last 50 mm at travel on the closing cycle, the door moves in 3 directions to form a seal against the floor, at the bottom and against the frame on both sides and at the top.Nylon runner guides will be fixed to the floor in such a way that they do not obstruct trolley movement through the door.They will provide stability during the opening and closing cycles and assist in creating the necessary pressure at the bottom of the door to maintain the seal.Floor guides across the door opening, or doors with no floor guidance will not be considered.To ensure efficient sealing of the doors, the door manufacturer will provide the door frames. They will consist of reinforced plasterboard panels faced with the same laminate as the doors. The door frames will be edged with an aluminium extrusion and with concealed fixings that are adjustable during installation to ensure a 100% hermetic seal is achieved. Vision panels will be fitted to all doors. Automatic units will be of the single phase electronic type mounted directly to the door track. The units will consist of a computerized electronic controller and motor. The drive mechanism will be by heavy-duty steel reinforced toothed fabric belt. The controller will have the facility to individually set opening speeds, partials opening, closing speeds, time delays and a variety of locking and interlocking options, within factory preset limits. The door controller will also have the ability to sense additional loads on the door caused by any obstruction in its path and to automatically stop or reverse the direction of travel. The controller will be capable of either being operated by elbow switches/foot switches / Knee Switches/ key switches.All doors will be able to be operated easily manually in the event of failure of the power supply or the automation units
Writing Board 01 Nos with magneting system Size:- 1000x700x60 Deep made out G.P Sheet to be flushed with the wall system complete set as per enclosed tender technical specificationsl. One Operating List Board should be provided in each Operating Theatre and should be made of Ceramic Magnetic white board. Operating List Board should be flush mounted.
Cascade Pressure stabiliser 01 Nos having muliti 304 grade stainless steel blade to control the room air pressure Pressure Relief Dampers should be provided in each room to prevent cross contamination of air from clean and dirty areas. Suitably sized air pressure relief damper should be strategically placed, enabling differential room pressure to be maintained and ensure that when doors are opened between clean and dirty area. Counter-weight balancing system should be provided in the PRD to maintain positive pressure inside the operation room. Air pressure stabilizers should have unique capability of controlling differential pressure to close tolerance. The PRD should remain closed at pressure below the set pressure and should open fully at pressure only fractionally above the threshold pressure.The body should be epoxy powder coated as per standard BS colors. First class electrolyzed steel plate should be used for body and with high grade SS304 Stainless Steel for bladders.
Srorage unit 02 Nos of size 1666 x 865 x 350mm having two shelves & stainless steel having 5mm thick glass door & mounted flush with the theatre wall. The storage unit should be made with 1.50 mm thick EGP Zinc coated sheet panels. Storage Cabinet should be divided in two equal parts and each part should have individual glass doors with high quality locking system. Each part should be provided with racks.
ICU Ceiling Pendent 01 No CE Marked / UL Listed The supply unit will meet the high standards for a safe and reliable operation in the ICU. The supply unit will have upgrading capability of new functions for adaptation to future requirements. All surfaces will be resistant against corrosion and disinfectants. Colour of painted surfaces: RAL 9002 The functional units of the supply unit will be completely assembled and tested by the manufacturer. Ergonomic, optimized supply unit consisting of the following functional units: Pendant should had electrical / Pneumatic brakes Ceiling fixture set for installation to concrete ceiling structure. Ceiling interface for connection of supply unit with electrics and gases delivered from site. Media columns of 800 mm with Provision for terminal units for medical gas supply/gas evacuation, (5 nos), high- and low voltage power supply (10Nos) Workstation components such as shelves (nos), drawers (1 Nos), & one IV rod of 800mm for mounting Syringe pumps • The above shelf could be adequate enough to mount 15” screen Multipara monitor of 15 Kg • The below shelf could be adequate enough to mount ventilator • The drawer will be equivalent to shelf size. Will have central rotation facility (Swivel range) at least 3300 Complete unit including intermediate ceiling construction and installation. The previously mentioned functional units will be coordinated mechanically, functionally and ergonomically, thus presenting a complete medical supply unit. Finished floor to bottom edge of suspended ceiling will be 800 mm.
Supply & Installation of partion of curtain with IV track at each bed - 01 Nos
Electrical work inside room, wiring, switches etc and air conditioning not included in items here-in-before to be supply and fix - 01 Lot
CSSD Stainless Steel racks with 5 shelves, Size: 1830mm length x 535mm width x 1830mm height : technical specifications for stainless steel storage rack with 56 shelves for receiving area • Shall be made of good quality Stainless Steel SS 304; Size: 1830mm L x 535mm W x 1830mm H • Floor mounted type, storage rack with five shelves to store the medical instruments • Frame shall be fabricated of 40mm square Stainless steel pipes, legs shall be provided with adjustable nylon Bullet feet; Frame thickness , 14SWG. • The shelves are fabricated of 16 SWG Stainless Steel sheets ground polished to smooth surface • Edges are welded together & polished at corners
Stainless steel work table 01 No with two sink. size: 2400 x 650 x 900mm : technical specifications for stainless steel work table with sinks • Complete stainless steel SS 304 body construction, 16SWG thickness. • Should have good quality water inlet, air inlet valve, drain and overflow connections with manual drain valve, for washing of instruments. • Shall have provision for attaching spray gun rinser (air / water) • Separate hot and cold water faucet above each sink • Shall have Two Sinks made of stainless steel SS 304 quality, 16SWG thickness, are designed in a way to minimize splash, Minimum size of each sink shall be 700 x 440 x 240mm • Shall have an undershelf made of stainless steel SS304, , 16SWG thickness., shelf size: 2355mm Length x 400mm width, fitted at 300mm above floor level • Frame (square) shall be made of stainless steel SS 304 quality, 14SWG thickness. • All the joints shall be welded and fine finished
Spray gun riser 01 No with eight attachments : technical specification for spray gun rinser with 8 attachments • Various sizes and shapes of minimum eight attachments made of good quality Stainless Steel to be used for cleaning syringes, catheters, endoscopes, cyst scopes, other instruments and articles used in sterile services. • Shall be capable for minute jet of spray of compressed air / water • 1/4"BSP connection with SS breaded Hose • The water/air pressure should be released, regulated and fully controlled by the spray gun trigger. • Should be suitable to be connected with the wash station with double tank.
Ultrasonic cleaner, 01 No Capacity 30 litres.: technical specificatioon for ultrasonic cleaner • Shall be made of Stainless Steel SS 304 quality, 18SWG thickness of body, door and paneling. • The Ultrasonic generator and the ultrasonic cleaning bath are built in one integral cabinet with castor wheels • Shall be designed for ultrasonic generation with PZT transducers for mechanical vibration in the cleaning liquid • Shall have a minimum volume of 30 liters, with ultrasonic frequency of 30 KHz (+/- 3 KHz), ultrasonic power of 500 Watts • Transducers: PZT – elements in sandwich form. • Should be supplied with suitable SS Lid and baskets • Volume – 30 litres
Washer disinfector 01 No with inbuilt drier, double door, 250-275 litres capacity, Electrical load: 20KW : technical specification for micro processor controlled washer disinfector with inbuilt dryer - double door • Should be made of good quality Stainless Steel and the unit shall have double door stainless steel SS 304 quality, 16SWG thickness. ; All connecting pipes shall be made of good quality stainless steel • Body and Frame shall be made of Stainless steel 304 quality, 14SWG thickness. • The external panel shall be made of stainless steel 304 quality, , 18SWG thickness. • Inner chamber volume shall be 250 to 275 Litres approx. and can handle up to 1200 instruments per hour; • Shall be designed to wash, rinse and drying all kinds of surgical instruments, anesthetic and respiratory tubing, suction devices, bottles and other glassware. • Microprocessor control for all services, programming and statistic functions – three preset programs and process shall be automatically controlled in a time regulated sequence. • Double wall with insulation to run with minimum sound and heat emission; Shall be provided with Silicon type gasket for door • Temperature: Washing at 50 to 65 deg.C; Thermo disinfection at 80-90deg.C • Hot or cold water Spray through rotating arms, Automatic Disinfectant loading through dosing pump • Effective Drying: The instruments and hoses are dried very thoroughly, inside out. An air particle filter ensures that the drying air is free from particles. • Shall be fitted with Sensor to detect level in soap tank and easy refilling system, Sensor for water in chamber to avoid dry run, have powerful water circulation pump, four spray arms, dual dosing pump etc. • Electrical load – 20KW, 415 V, AC, three phase & N, 50Hz
Drying Cabinet, 01 No of capacity: 275 litres approx : techical specificaton for drying cabinet • Shall be designed to dry washed surgical instruments, utensils, glassware etc., by hot air blow • Cabinet casing, door and shelves should be made of stainless steel SS304 quality • Shall be of minimum volume of 275 liters and with 8 shelves kept for drying at a time • Shall have Double wall construction with insulation between panels to reduce heat losses and noise • The unit has an adjustable temperature range of 70 – 90 deg C • Shall be operated on an electrical connection 230V, AC, single phase 50 Hz
Stainless Steel Work table 01 No with undershelf :techical specification for stainless steel work table with undershelf • Work table for packing of instruments, all smooth ground corners. • Table shall be made of Stainless steel 304 quality, 16SWG thickness. • It shall have under shelf, made of stainless steel 304 quality , 16SWG thickness. and fixed on the frame. • Dimension: 1200mm x 600mm x 900mm H
Stainless Steel control and packing table 01 No, of size: 2000mm Length x 1400mm width x 1400mm height : technical specifications for control and packing table • Shall be made of good quality Stainless Steel SS 304, thickness of 16 SWG • Shall have minimum two shelves for separation, control and packing of various sets of sterilized goods forwards, clinics, operation theatre etc., • Shall have Stainless steel 304 quality 1 no. drawer, 18SWG thickness, underneath the table and also with nylon adjustable leveling bullets for legs • Shall have provision for electrical connections for sockets of 5 Amps & 15 Amps • All the joints shall be welded and fine finished. • Table overall size – 2000mm length x 700mm Width x 1400mm H
Stainless Steel Table mounted Heat Sealing machine 01 No : technical spcification for stainless steel table mounted continuous band sealer • This sealer with conveyor is suitable for small bags packaging and adopts electronic constant temperature control system and speed adjusting transmission mechanism. It can seal plastic films of various materials. • Temperature Range: 0 – 300oC • Sealing speed: 0-12mtr/min • Sealing film thickness: 0.02-0.80mm • Sealing width: 6-15 mm • Power supply: 220-240 / 50 Hz 1 Phase , • Power consumption 500 W • Conveyor Loading: 5Kg • Machine Size: 900mm x 420mm x 660mm • Table shall be made of Stainless steel 304 quality, 16SWG thickness. • It shall have under shelf, made of stainless steel 304 quality , 16SWG thickness. • Table Size: 1200mm Length x 600mm width x 900mm height
Horizontal Rectangular High Pressure High Vacuum Radial Hinge type Double Door Sterilizer, 01 Nos Fully automatic cycle operation with printer, inner chamber size: 450mm width x 450mm height x 1200mm length, 250 litres volume : technical specifiocation for horizontal rectangular high pressure, high vaccum, fully automatic cycle processing, radial hinge type double door steam sterlizer • Steam sterilizer, horizontal Rectangular, with Double Hinged radial door • Inner chamber volume of around 200 to 250 liters with minimum Inner chamber dimensions of 45cm width x 45cm height x 120cm length. • Vacuum pump - Should have inbuilt water-ring type vacuum pump minimum 2HP/3HP to provide pre-vacuum and post-vacuum pulses, to withstand negative pressure and create high vacuum of 26”hg; • The sound level of vacuum pump shall be <80DP and no vibration. Vacuum pump brand shall be New Genre OR Vindi vak. This should also be fitted with suitable stainless steel condenser and pipings. • Material : Inner chamber - Stainless steel SS 316 quality with a minimum thickness of 6mm; door – Stainless steel SS 316 quality with a minimum thickness of 12 mm; Radial Locking arm-made of Stainless steel SS 304 quality; • Inbuilt steam generator underneath the chamber shall be made of stainless steel SS 304 quality; • All connecting pipes shall be made of good quality stainless steel; Jacket-boiler quality steel; stand-mild steel with anticorrosion paint. • Electrical immersion type heaters of 18 KW, equipment should be operated on 400-440 V, 3 phase with neutral, AC supply. • Should provide heat resistant SILICON door gasket withstand upto 140oC. • The sterilizer shall have to draw the water, automatically through a feed water pump, when needed in the inbuilt boiler.; preferably Crompton make water pump • Insulation of Glass wool thickness shall be 50-75mm. Insulation cover shall be made of good quality stainless steel 304 quality • Should be provided with pneumatic operated valves and suitable Air compressor. • Should provide analog gauges for chamber pressure and Jacket pressure;. • The sterilizer shall be fitted with Pressure switch, Contactor, solenoid valves, pressure transmitter, steam trap, water reading glass, safety valve, plug screen, vacuum drier etc..as needed • Working temperature of sterilizer is 121oC to 134oC and the corresponding pressure is 1.2 to 2.1 kg/cm2
• Should provide heat resistant SILICON door gasket withstand upto 140oC. • Insulation of Glass wool thickness shall be 50-75mm. Insulation cover shall be made of good quality stainless steel 304 quality • Should provide analog gauges for chamber pressure and Jacket pressure; Necessary calibration certificates to be submitted during supply • The sterilizer shall be fitted with Pressure switch, Contactor, Non return valve, steam trap, water reading glass, safety valve, dial thermometer, plug screen, vacuum drier etc..as needed • Documents: user manual in English, Hydraulic test certificate, Material test certificate, IQ, OQ, DQ & PQ documents, Leak Test certificate, Gauge calibration certificate, Master Gauge calibration certificate and Warranty certificate Stainless Steel Table mounted gauze cutting machine 01 Nos: technical specification for stainless steel table mounted gauze cutting machine • The unit should be fitted on the table formed out of SS304 quality material • The low profile base plate drastically reduces the fabric distortion & drag. • The close fitting of the wing of the base plate easily slips under the bottom ply without catching or snagging the cloth. • The motor cooling fan dissipates heat build-up & directs the hot air-flow away from the operator. • Operating handle and lever are positioned for maximum convenience. • Blade can be sharpened by the automatic sharpening unit only when lever is pressed down, ensuring safety. • Blade size – 200mm. • Cutting capacity – 165mm • Power – 230V Ac 50Hz, 0.75HP • Table top made of stainless steel SS 304 quality, 16SWG thickness and frame made of stainless steel SS 304 quality, 14 swg • Table Size:900x 600 x 900mm
Stainless Steel table trolley with 2 shelves, 01 Nos of size: 1080 x 550 x 900mm technical specification stainless steel table trolley with undershelf • The trolley is for use in the sterile goods store when batching sterile goods for delivery and also for short internal transport. • Frame and body made of stainless steel 304 quality, 14SWG thickness and under shelf made of stainless steel SS 304 quality, 16SWG thickness. • The trolley frame is provided with handle bars for easy movement • The undershelf is mounted at 300mm above floor level with spacers on the trolley frame. • The shelf is fitted with buffer wheels • The frame is fixed on 4 Nos. heavy duty castors swiveling castors for easy movement in narrow passage • Size: 1080 x 550 x 800mm
Stainless Steel Closed Distribution trolley 01 No: technical spcification for stainless steel closed distribution trolley • Shall be made of good quality Stainless Steel SS 304 Base frame and body , 14SWG thickness. • Shall have heavy duty castor wheels with 2 Nos. fixed type and 2 Nos. swiveling type • Shall have two foldable type door, the doors are designed to fold back against each end • Shall be fitted with a central locking handle to operate rod at the top and bottom of the door – for opening and locking of the door • Shall have minimum Two Stainless Steel shelves, 16SWG thickness. • Size: 1280 x 650 x 1170mm
Stainless Steel racks with 5 shelves, 01 Nos of size: 1830mm length x 535mm width x 1830mm height : technical specification for stinless steel storage rack with 5 shelves for issuing area • Shall be made of good quality Stainless Steel SS 304; Size: 1830mm L x 535mm W x 1830mm H • Floor mounted type, storage rack with five shelves to store the medical instruments • Frame shall be fabricated of 40mm square Stainless steel pipes, legs shall be provided with adjustable nylon Bullet feet; Frame thickness , 14SWG. • The shelves are fabricated of 16 SWG Stainless Steel sheets ground polished to smooth surface • Edges are welded together & polished at corners
(BOQ Schedule 'A' Part-XXXII). OPERATION AND MAINTENANCE OF INSTALLATION
Maintainence and operation of E/M services operated from MEP (Mech, Electrical & plumbing) Plant Room for MH Yol consist of following equipments:- (a) Main receiving station with 630 KVA Transformer - 03 Nos (b) 500 KVA DG Set-02 Nos and 2000 KVA DG Set -01 No (c) 11KV VCB (01 Incomer and 03 Nos Outgoing)-01 No (d) Operation of all LT panels including rectification of electrical fault (e) HVAC (Air conditioning ) plant room of capacity 300TR including 03 Nos Chiller units, 02 cooling tower, 100KW Hot water Generator -02 Nos including all equipments such as Monoblock pump & motor set, AHU, FCU Axial fan and LT Panels including rectification of fault (f) Ext water services incl operation of sluice valve, checking and rectification of water pipe line leakage installed near MEP Plant room (g) Sewage treatment plant and effluent treatment plant including Equipments i.e Monoblock pump & motor LT Panels incl water storage tank etc. (h) Lifts - 06 Nos with lifts plant room including Equipments, three phase motors, LT panels Etc Shifts consists of electrician - 01 No, GM-01 No, Ref Mechanic - 01 Nos, Lift operator -01 Nos, Helper - 02 Nos
(BOQ Schedule 'A' Part-XXXIII). OPERATION AND COMPREHENSIVE MAINTENANCE OF INSTALLATION
Maintainence and operation of E/M services operated from MEP (Mech, Electrical & plumbing) Plant Room for MH Yol consist of following equipments:- (a) Main receiving station with 630 KVA Transformer - 03 Nos (b) 500 KVA DG Set-02 Nos and 2000 KVA DG Set -01 No (c) 11KV VCB (01 Incomer and 03 Nos Outgoing)-01 No (d) Operation of all LT panels including rectification of electrical fault (e) HVAC (Air conditioning ) plant room of capacity 300TR including 03 Nos Chiller units, 02 cooling tower, 100KW Hot water Generator -02 Nos including all equipments such as Monoblock pump & motor set, AHU, FCU Axial fan and LT Panels including rectification of fault (f) Ext water services incl operation of sluice valve, checking and rectification of water pipe line leakage installed near MEP Plant room (g) Sewage treatment plant and effluent treatment plant including Equipments i.e Monoblock pump & motor LT Panels incl water storage tank etc. (h) Lifts - 06 Nos with lifts plant room including Equipments, three phase motors, LT panels Etc Shifts consists of electrician - 01 No, GM-01 No, Ref Mechanic - 01 Nos, Lift operator -01 Nos, Helper - 02 Nos
(BOQ Schedule 'A' Part-XXXV). ROADS, PATH, CULVERTS AND HARDSTANDINGS WORKS.
Providing and erecting direction/place identification retro-reflectrorised sign with 10 years warranty, manufacturer as per IRC:67:2018 using type XI ASTM D 4956-09 micro prismatic retro reflecting sheeting fixed over aluminium sheeting, 2mm thick with clause 801.3, supported on stainless steel hollow section post 50mm dia 4mm thick, firmly fixed to the ground by means of properly designed foundation with M-20 grade cement concrete 45x45x60cm, 60cm below ground level including painting all non-reflective faces with epoxy paint two coats over epoxy primer, complete all as specified and directed.
Providing and fixing Glow studs of size 100x20mm made of heavy duty body shall be moulded ASA (Acrylic stryene Acryloretrite) or HIP (High impact polystyrene) or ABS having electronically welded micro-prismatic lens with abrasion resistant coating as approved by Engr-In-Charge. The glow stud shall support a load of 13636 Kg tested in accordance with ASTM D4280. The slope of retro-reflective shall be 35 (+/-5) degress to base. The reflective panels on both sides with at least 12cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I:809 as recommended BS:Part 4 : 1973. The studs shall be fixed to the road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engr-In-Charge.
Providing and fixing post delinator made of ABS round body fitted with 2 Nos 100mm dia high reflective reflectors and mounted on MS pipe of 60mm dia duly powder coated anti-rust and anti theft steel to be installed as per direction of Engr-In-Charge.
(BOQ Schedule 'A' Part-XXXVI). SEWAGE DISPOSAL.
Providing and fixing orage colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS: 10910, on 12mm dia steel bar conforming to IS:1786, having minmum cross section as 23mmx25mm and overall minimum length 263mm and width as 165mm with minimum 112mm space between protruded legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138mm as per standerd drawing and suitable to with stand the bend, all as specified.
RCC precast concrete HD-20, 100mm thick factory made circular manhole cover 900mm dia all as specified and shown on drawing.
(BOQ Schedule 'A' Part-XXXVII). AREA DRAINAGE.
Circular shape manhole cover set 560mm internal diameter HD-20 100mm thickness.
Circular shape manhole cover set 740mm internal diameter HD-20 100mm thickness.
(BOQ Schedule 'A' Part-XXXVIII). SECURITY FENCING AND GATE.
Providing and fixing concertina coil fencing with punched tape concertina coil 600mm dia, streched to 6m length, 50 Nos spiral turns per 6m length, spring core wire (2.59mm thick) of high tensile strength of 1620 N/sqmm with tape (0.25mm thick) hot dip galvanised upto 20 microns, weight of each coil 8.50 Kg and fixing the same on existing 'Y' shaped angle iron with 6 horizontal R.B.T (reiforced barbed tape wire stud tied with G.I staple sand G.I clips to retain horizontal clips shall be @ 5 Nos per 2 spiral turns approximate 125 clips per coil including necessary bolts complete all as specified and directed.
(BOQ Schedule 'A' Part-XXXIX). STP & ETP.
SEWAGE TREATMENT PLANT (MBBR Technology )-120KLD Supply, installation, testing & commissioning of120 KLD Sewage Treatment Plant based on attached growth technology using the 'Moving Bed Bio-media Reactor' (MBBR) process. The plant proposed shall be suitable to treat (120 KLD), with tertiary treatment of capacity 120 KLD at present.(Excluding Electro Mechanical equipment Cost such as pumps,filters,blowers measured seperately and paid seperatily.) Nature of effluent - Domestic Sewage from Toilet and kitchen waste. Daily average flow - 120 Cum / Day pH - 6.5 - 8.0 BOD5 - upto 250-350 Mg/L S. Solids - 250 - 400 Mg/L COD - upto 450-600 Mg/L Oil & Grease - 50 Mg / L Effluent Discharge After Filtation pH - 6.5 - 8.5 BOD5 - Less than 10 Mg/L S. Solids - Less than 100 Mg/L COD - Less than 250 Mg/L Oil & Grease: < 10 Mg/L
(A) Civil Work - For 120 KLD (i) RCC Screen Chamber capacity 2.16 cum as per approved shop drawing in civil part.(Dim.in mm:1200x1500)effective height-1200. (ii) RCC Grease Chamber capacity 3.42cum as per approved shop drawing in civil part.(Dim.in mm:1200x1900)effective height-1500 (iii) RCC Raw sewage Collection cum Equalization sump capacity 49 m3+1.1m FB(Free boad.) in civil part as per Shop drawing including all inlet and outlet complete as per shop drawing .(Dim.in mm:3700x3900)effective height-3400 (iv) RCC MBBR Tank capacity 19.36 m3+ 0.5m FB(Free boad.) in civil part as per Shop drawing including all inlet and outlet complete as per shop drawing .(Dim.in mm:2200x2200)effective height-4000 (v) RCC Tube Each jobtler Tank 12.54 m3 in civil part as per Shop drawing including all inlet and outlet complete as per shop drawing .(Dim.in mm:1500x2200)effective height-3800+0.7m FB(Free boad.) (vi) RCC Chlorine contact/Filter feed tank capacity 20 cum complete in all respect in civil paer as per approved shop drawing .(Dim.in mm:2500x2200)effective height-3650+FB( Free Boad )0.75 m (vii) RCC Sludge Holding Tank capacity 34 cum complete in all respect in civil paer as per approved shop drawing .(Dim.in mm:3700x2300)effective height-4000+FB (Free Boad)-0.5m (viii) RCC Soft water storage Tank capacity 23.1 cum complete in all respect in civil paer as per approved shop drawing .(Dim.in mm:2500x2200)effective height-4200+ FB (Free Boad)-0.3m (ix) RCC Treated Water Storage tank capacity 25.9 cum complete in all respect in civil paer as per approved shop drawing.(Dim.in mm:2800x2200)effective height-4200 + FB (Free Boad)-0.3m
(B) SEWAGE TREATMENT PLANT: Supply, installation, testing & commissioning of Stainless Steel Perforated Screen with suitable lifting arrangement (approximate size 450 mm wide x 600 mm high) with 10mm & 8mm clear spacing.
Supply, installation, testing & commissioning of digital type level indicator for automatic operation of the complete system with high/low level alarm System. (Contractor shall ensure submission of detailed GA drawings (Plan & Section), P & I diagram, schematic diagram for the mentioned components for the complete working of the STP and got it approved by the GE. (Equalisation Tank, Clarified water Tank, Treated water Tanks etc.,)
Supply, installation, testing & commissioning of non clogging type pumps, having CI casing, CI impeller and SS Shaft complete with all accessories, motor 2850 RPM. Each pump should be operate to a curve required by the operating conditions connected to a TEFC induction motor suitable for 400/440 volts, 3 phase 50 cycles A.C. supply. Delivery header with isolation valve, pressure gauge on delivery line with isolation cock level controller with wiring to control the level of sump automatically.
(i) Submersible Pumps in equalisation tank. 2 Nos. (1 working & one standby.)(Solid handling cap. 30-40 mm) Flow rate (each) = 6 m3 / hr. Head = 8-10 Mtr
(ii) Plant room sump pump 2 Nos (1 working + 1 standby ) .Outlet pipe of pump should will be connected to equalisation tank. Flow rate = 10 cum/hr. Head= 15 Mts (Solid handling size for this pump shall be 10 mm). Including Provision of guide ropes to guide submersible pump from upper level to operational level in sump basin with channels/angle section of MS shall be made by the STP contractor.
Supply, installation, testing & commissioning of Non clogging type horizontal centrifugal Sludge transfer / disposal / recirculation pumps (With Tube Setler tank) capable of handling solids upto 7 mm, having C.I. casing, C.I. impeller, SS shaft, IP 55, Class B insulation, mechanical seal complete with all accessories, motor of required capacity, Pressure gauge on delivery line with isolation cock, (with wiring) to control the level of sump automatically. 2Nos (1w+1stb.) (Solid handling size for this pump shall be 7 mm). Flow rate (each) = 15 m3 / hr. Head = 8-10 Mtr
Complete Air Diffusion System including following: Supply, Installation, testing and commissioning 2 Nos. twin type rotary air blowers capable of delivering approx. 110 cum/hr of free air at 0.6 kg/cm2 (one working & one standby) , driven through “V” belt or directly coupled through flexible coupling to a TEFC motor of suitable HP Suitable for 415 ± 10% volts, 3 phase, 50 cycles A/C supply.
Non clog type air dispersion system capable of handling 3-5cfm of air with oxygen transfer with efficiency of 3-4% per/meter water depth. Air dispersion grid shall be assembled in modular form so they can be replaced/repaired easily from platform at the top (fine bubble membrane diffusers)
For equalization tank -1 No.
For sludge holding tank - 1 No.
Floating Aerated Bio-media Reactor - 2Nos. Note : Air dispersion system shall be provided for Equalisation Tank, Sludge holding Tank and MBBR Tanks’.
Supply, installation, testing and commissioning of PVC floating media to be installed in Moving Bed Bio- Reactor - 2 Nos. and PVC tube deck setling media in Secondary Each jobtling Tank for 120 KLD daily sewage flow
Providing fixing testing and commissioning of field/panel mounted pH meter with ABS weather proof IP 65 enclosure, LED indication for high and low pH ± 2% accuracy front keyboard calibration. pH Range: 0-14.
Providing and fixing single stage, monobloc horizontal, in-line pumps stainless steel , casing & impller- cast iron, pump shaft SS, mechanical seal coupled to a TEFC electric motor, 2900 RPM. Each pump should be operate to a curve required by the operating conditions connected to a TEFC induction motor suitable for 400/440 volts, 3 phase 50 cycles A.C. supply having IP 55 protection enclosure, vibration eliminating pads etc. complete with base and frame, nuts and bolts and necessary RCC foundations as per requirement and as per instructions
(i) Filter Feed Pumps for Recycled Water available from STP. Capacity : 7 cum/hr Head : 30 M No. of Pumps 2 Nos. (1 working + 1standby)
(ii) Description same as items nos 700 for Irrigation Water Transfer Pump Capacity : 24 M3/hr. Head : 50 M No. of Pumps 2 Nos. (1 working + 1standby)
Supply, installation, testing and commissioning of vertical floor mounted mild steel Epoxy filter of suitable size for required flow and head, provided with an inlet distributor. The vessel is painted externally and internally with epoxy and bitchromon paint with primer with frontal piping & valves, back wash system & filter media etc. complete with standard fittings like cover, pressure gauge at inlet & outlet, sampling cock, rinse drain valve, air vent valve with piping, bolts, nuts & rubber gaskets.
(i) M&L of Multigrade pressure sand filter media Flow rate : 7 cum/hr Filtration velocity : 12 cum/hr/sqm,Shell/Disc thickness : 6/8 mm,Filter Diameter : 900 mm.Frontal Piping : MSEP
(ii) M&L of Activated Carbon Filter Flow rate : 7 cum/hr Filtration velocity : 12 cum/hr/sqm,Shell/Disc thickness : 6/8 mm,Filter Diameter : 900 mm.Frontal Piping : MSEP
Supply, installation, testing and commissioning of Filter Press suitable for 120 kld daily average flow, plate size 18"x18"x17 nos plate manual with screw feed pumps (2 M3/hr at 50 m) 2 nos (1Working+1Standby), with interconnecting piping and poly dosing system of 2 M3/hr @ 50 m head capacity all complete.
Supply, installation, testing & commissioning of U.V. disinfection system suitable for waste water for a flow rate of 7 cum/ hr. approx, 4 No UV lamps (The unit should be suitable for waste water application)
Supply, installation testing and commissioning of chlorine dosing system comprising of dosing pump of capacity 0-6 LPH, suitable for 3kg/sqcm injection pressure chemical grade HDPE dosing tank of 100 Liter capacity.
Providing and fixing all piping (as described below) and isolation control Ball / butterfly valves of required sizes and numbers with all accessories, fittings, supports, clamps,, nuts, bolts, washers, puddle flanges for all tanks, other flanges, NRV's, flow control valves, flow measurement device, for making the system complete in all respects with anti corrosive protection. Valve Mak: Zoloto/Sant/AIP Butterfly Valve : Cast Iron Wafer type butterfly valves Check Valve : Cast Iron body dual plate wafer type check valve (NRV) UPVC pipe : All piping MSEP Pipe : Air grid piping-Submerged/non submerged PVC : Riser Pipe Dia from MBBR Tank-1 to MBBR Tank-2 and from MBBR Tank-2 to TubeEach setler. uPVC (Sch 40) : Pipe for Dewatering Pumps GI : All Submerged pipe for air grid MSEP : Frontal piping for Filter with butterfly valve
ELECTRICAL INSTALLATION FOR STP: M & L for LT feeder pillar box with, installation, testing and commissioning, factory fabricated prewired,, cubical type of appropriate size outdoor type with canopy of appropriate size, dust and vermin proof, made out of 50X50X6mm angle ironFrame/legs and 3.15mm thick CRCA sheet with openable shutters on bothsides (front & rear), powder coatedexternally and internally, having locking arragement mounted on four leg 90cm high (30cm below ground level and 60 cm above ground level ), Panel ,embedded in PCC(1:2:4)type B2 each of size 200X200X300mm complete all specified & directly by Eng.-IN-Charge to accomodate the following: Incoming a) Aluminium bus bar 250A for three phase and neutral duly insulated with sleeves of different color RYB. b) MCCB 160 Amp FP 25 kA-01 Nos. Outgoing MCB TPN 40 Amp-02 Nos. MCB TPN 32 Amp-02 Nos. MCB TPN 16 Amp-2 Nos. MCB TPN 10 Amp-18 Nos. MCB SPN 6-32 Amp-09 Nos. S/D Starter-10.0 HP-02 Nos. DOL Starter-7.5 HP-02 Nos. DOL Starter-5.0 HP-02 Nos. DOL Starter-3.0 HP-02 Nos. DOL Starter-2.0 HP-8 Nos. DOL Starter-1.5 HP-6 Nos. DOL Starter-1.0 HP-2 Nos.
EFFLUENT TREATMENT PLANT 24 KLD (PHYSICO-CHEMICAL PROCESS) SITC of 24 KLD Effluent Treatment Plant based on PHYSICO-CHEMICAL PROCESS. The plant proposed shall be suitable to treat (24 KLD)(Excluding Electro Mechanical equipment Cost such as pumps,filters,blowers measured seperately and paid seperatily.) Civil work only. Nature of effluent - Lab,laundary,OT's etc waste. Daily average flow - 24 Cum / Day Anticipated effluent parameters before treatment: Daily average flow : 24 cubm/Day PH : 5 - 9.0 BOD24 : 2240 - 600 mg/l S. Solids : 240 - 6240 Mg/l COD : 600 - 1240 mg/l Desired Effluent discharge standard after treatment: PH : 7.0 - 8.24 BOD24 : Less than 100 mg/l S. Solids : Less than 100 mg/l COD : Less than 250 mg/l
Civil Work 24 KLD ETP (i) RCC Screen Chamber Chamber capacity 1 cum as per approved shop drawing in civil part.(Dim.in mm:1000x1000)effective height-1000. (ii) RCC Raw sewage Collection cum Equalization sump capacity 15.3 m3+ 0.5m FB in civil part as per Shop drawing including all inlet and outlet complete as per shop drawing (Dim.in mm:2800x2600)effective height-2100. (iii) RCC Batch Reactor 6.75m3+ 0.5m FB in civil part as per Shop drawing including all inlet and outlet complete as per shop drawing .(Dim.in mm:1500x1500)effective height-3000. (iv) RCC Tube Each jobtler Tank 4.35 m3+0.6m FB in civil part as per Shop drawing including all inlet and outlet complete as per shop drawing.(Dim.in mm:1500x1000)effective height-2900. (v) RCC Clear Water Storage tank capacity 6.3 cum complete in all respect in civil paer as per approved shop drawing.(Dim.in mm:1500x1500)effective height-2800+ 0.7m FB (Free Boad.). (vi) RCC Sludge Holding Tank capacity 5.85 cum complete in all respect in civil paer as per approved shop drawing .(Dim.in mm:1300x1500)effective height-3000.
Supply, installation, testing & commissioning of Stainless Steel Perforated, Corrugated Bar Screen with suitable lifting arrangement as hook of suitable lifting capacity as required to resist the lifting load.
EQUALIZED WASTE WATER TRANSFER PUMPS FOR ETP
Supply and fixing horizontal, centrifugal sludge recirculation pump. The pumps shall have CI casing, CI Impeller & CS shaft & sleeve with mechanical seal. MSEP common base frame.Pump Capacity 1 m3/hr @ 6-8 m head. (1w+1stb.)
Supply, installation, testing and commissioning Lime, Alum and Poly Electrolyte dosing system Capacity - 50-100 LPH
Supply, installation, testing and commissioning of PVC tube deck media For ETP to be installed in primary tube tank alongwith suitable sludge removal arrangement.
Supply, installation, testing and commissioning of Filter Press suitable for 24 kld daily average flow, plate size 12"x12"x12 nos plate manual with screw feed pumps 2 nos (1Working+1Standby), 0.5HP with interconnecting piping and poly dosing system of 1 M3/hr @ 30 m head capacity all complete.
Interconnectiong Pipelines, valves & fittings for hospital waste water pretreatment for making system complete.
ELECTRICAL INSTALLATION FOR ETP :Supply, installation, testing and commissioning of LT feeder pillar box with, installation, testing and commissioning, factory fabricated prewired,, cubical type of appropriate size outdoor type with canopy of appropriate size, dust and vermin proof, made out of 50X50X6mm angle ironFrame/legs and 3.15mm thick CRCA sheet with openable shutters on bothsides (front & rear), powder coatedexternally and internally, having locking arragement mounted on four leg 90cm high (30cm below ground level and 60 cm above ground level ), Panel ,embedded in PCC(1:2:4)type B2 each of size 200X200X300mm complete all specified & directly by Eng.-in-Charge to accomodate the following:- Incoming a) Aluminium bus bar 63A for three phase and neutral duly insulated with sleeves of different color RYB. b) MCCB 40 Amp FP 16 kA-01 Nos. Outgoing MCB TPN 10 Amp-6 Nos. MCB SPN 6-32 Amp-03 Nos. DOL Starter-2.0 HP-2 Nos. DOL Starter-1.0 HP-4 Nos.
(BOQ Schedule 'A' Part-XL). INTERNAL WATER SUPPLY.
S&F for Bib taps 15 mm bore fancy type chromium plated long body of shank, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.
S&F for chromium plated elbow operated tap of 15 mm dia all as specified and directed.
S&F for brass chromium plated wall mixer of 15 mm dia for hot and cold all as specified and directed.
S&F for wall hung brass chromium plated soap dispenser of capacity exc. 0.5 Ltr with touchless activation built-in-smart infra red sensor senses fixed with stainless steel screws complete all as specified and directed.
S&F for electronic hand drier through flow discharge, vaccum type motor/blower combination, infrared optical sensor with 35 second lockout feature heating element made of nichrome wire fixed with stainless srews to wall all as specified and directed.
Construction of underground tank of capacity 140 KLD all as specified and shown on drawing.
Demolition and dismantling works/Credit Works as listed in Schedule 'A' Part-XVII has been attached in tender in PDF format and the amount of Schedule i.e Rs. 6225932.10 shall be deducted from the total amount of BOQ to arrive at the contract sum.
VRC Constructions India Pvt Ltd (BID ID -3096145)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.12 MB
Download all tender documents and submit your bid