SR to Providing & Erecting Street light & Related at SRP Gr-12 & Chetak Cammando force, Magodi Dist:- Gandhinagar. ( Civil SR Grant 2025 -26)

Name of work:- SR to Providing & Erecting Street light & Related at SRP Gr-12 & Chetak Cammando force, Magodi Dist:- Gandhinagar.

( Civil SR Grant 2025 -26)

Item Description Rate Amount

No. Quantity Unit

In Figure In Words

1A Providing & erecting bracket consisting of ISI mark "B" class G.I. Pipe 4.2 cm outside 15.00 Each 487.00 RS: Four

diameter complete with suitable G.I. Sleeve tubing of 2 mm. thick and required size Hundred Eighty

and length suitable for 76.5 / 80 mm. required size of pole top or pipe in pipe surface Seven only

for terrace as per instruction of EIC or wall bracket as per instruction of EIC having

nuts and bolts for fixing the brackets and having spread of Upto 0.70 mtr. length with

suitable rise as per site condition and suitable welded stiffner reducer and nipple with

check nut complete painted with one coat of yellow zinc and two coats of alluminium

paint for Single arm bracket suitable for pole or terrace as per design given by EIC

(a) For single arm bracket. (Jindal / Asian / Tata / Surya Prakash make Only)

(Fabricators:- Bajaj, Valmont, Transrail, Ambica,RR Ispat, Impression Only) (Test

certificate to be submitted)

1B For Double arm bracket. (Jindal / Asian / Tata / Surya Prakash make Only) 5.00 Each 616.00 RS: Six

(Fabricators:- Bajaj, Valmont, Transrail, Ambica,RR Ispat, Impression Only) (Test Hundred Sixteen

certificate to be submitted) only

2 Supplying and making Coil type earthing, coil made from 8 SWG galvanised iron 10.00 Each 369.00 RS: Three

wire with 50 mm OD and 50 turns (length of turns approx. 200 mm) and having Hundred Sixty

additional continuous streight length of 3.00 mtr at open end and should be Nine only

connected to earthing bolt and burried in 1.5 mtr deep specially prepared earth pit

complete with salt and charcoal/coke as required for coil type earthing.(Approx

weight of coil 1.0 to 1.1 Kgs)

Item Description Rate Amount

No. Quantity Unit

In Figure In Words

3 Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom including 10.00 Each 801.00 RS: Eight

excavation for the pole of size 45 x 45 x 100 cm. Deep by farma in below ground Hundred One

level with plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm) high upper ground level only

(20 cms.)with necessary curing, finishing & Colour in approved manner.

( for 4 & 6 mtr pole)

4 Supplying and erecting Galvanized iron pipe post ISI mark 'B' class 88.9 2.00 Each 4397.00 RS: Four

mm. O.D. 6 mtrs. Long duly painted with two coats of alluminium paint and Thousand Three

metallic base plate of 300 x 300 x 4 mm. thick to be erected as a compound Hundred Ninty

light pole with wire entry nipple and earthing bolt. Approximate weight of pole Seven only

47 Kg. within permissible limits as per IS effective length of sections Bottom:

5.5 mtr. having outside dia. 88.9 mm. Top: 0.5 mtrs. having outside dia.

mm. ( ISI test certificate from pipe manufacture &

Class/make/length/O.D/wall thickness/GI/ MS/ Weight test certificate from

pole manufacture shall be submitted) (Jindal / Asian / Tata / Surya Prakash

make only For G.I Pipe)(Fabricators:- Bajaj, Valmont, Transrail, Ambica,RR

Ispat, Impression Only) (Test certificate to be submitted)

5 Supplying & erecting Steel tubular pole (Swaged) confirming to IS - 2713 1.00 Each 8380.00 RS: Eight

(Part-II) 1980. Manufacturing process of steel tubular pole should be as per Thousand Three

IS specification. Basic steel tube should be ISI Marked. Pole should be Hundred Eighty

painted by one coat of Zinc comet Primer and two coat of Aluminium only

/approved paint. Erected on / in existing Foundation. The length of poles are

as below. [a] 9.0 mtr. Long Swaged Steel tubular pole (i) Pole as per IS

code 410-SP-4 with 300 X 300 X 4 mm base plate. (Approximate Pole weight

78 Kg.) For burial erection. (Jindal / Asian / Tata / Surya Prakash make Only)

(Fabricators:- Bajaj, Valmont, Transrail, Ambica,RR Ispat, Impression Only)

(Test certificate to be submitted) (ISI test certificate from pipe manufacture &

Class / make / length / O.D. / wall thickness / GI / MS / Weight test certificate

from pole manufacture shall be submitted)

Item Description Rate Amount

No. Quantity Unit

In Figure In Words

6 Supplying & erecting approved make SMC press moulded composite FRP. loop- 10.00 Each 890.00 RS: Eight

in, loop-out approx. 2mm thick box complete with Bakelite connector strip Hundred Ninty

5way(3P+N+E), DIN rail for mounting mob & hinged doors as per requirement only

having locking arrangements with mounting clamp with nuts, bolts & washers

suitable for erection on pole with cable clamps& earth bolt of following size of box.

7 Providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to 250.00 Each 111.00 RS: One

operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in Hundred Eleven

existing box. confirming to IS 8828/1996 with ISI Mark only

8 Supplying and Erecting of Fabricating terminal box for street light pole 115.00 Each 702.00 RS: Seven

made from 16 G. (1.5 mm.) thick M.S. sheet having following size complete Hundred Two

with fixing arrangement for terminal board, with necessary hole for 4 core 4 only

sq.mm. armoured copper cable entry and exit with 10 mm nipple from the

box. The box shall be provided with cover having up-down movement with

suitable mechanism and hinges on Top and bolting lock at bottom end. The

box shall be fixed by 2 nos.clamps fabricated from 25 x 6 mm flat. The box

shall be powder coated paint or good oil paint inside & outside of the box.

The size of box should be 330 x 260 x 140 mm. (depth). Also Providing and

fixing Terminal board of size 5.0 x 127 x 152.4 mm.bakelite sheet with

suitable brass studs with nuts, washers and clamps of size 25 mm x 3 mm

suitable for pole painted with one coat of red lead paint. (Asian colour must

9 Supplying and erecting "A" class Galvanised iron pipe for following size 50.00 Mtr. 171.00 RS: One

dia. meter having smooth finished bore of the pipe on both ends erected on Hundred Seventy

the face of the wall with clamps, nuts and bolts for laying of cable along the One only

pole / wall shaping the pipe as per site requirement to release cable entry.

10 Providing & Erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI 610.00 Mtr. 46.00 RS: Forty

marked copper wires of following size to be erected as directed. 3 core 1.5 sq.mm. Six only

PVC insulated round copper wire ISI mark.

Item Description Rate Amount

No. Quantity Unit

In Figure In Words

11 Providing & Erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI 440.00 Mtr. 77.00 RS:

marked copper wires of following size to be erected as directed. 3 core 2.5 sq.mm. Seventy Seven

PVC insulated round copper wire ISI mark. only

12 Providing & fixing 20 mm. dia. PVC insulated G.I. Corrugated Flexible 100.00 Mtr. 31.00 RS: Thirty

pipe with necessary socket, PVC bushes, saddle, Check-nuts etc. complete One only

of following sizes.

13 SITC of Outdoor aesthetically designed LED Street Light Luminaire with total 85.00 Each 3512.00 RS: Three

consumption of Max. 45 W with single piece die cast aluminium housing, high power Thousand Five

LED shall be mounted on high quality metal core PCB with extremely precison Hundred Twelve

designed heat sink complete with IP66 protection Class with polycarbonate / only

thoughened glass cover the fixture should be suitable for pole/bracket mounting. The

fixture to comply both LM79 and LM 80 guidelines with LED module min.

lumen/watt with toughen Glass L70 at 50,000 hrs, provided with high quality

polycarbonate lenses for better light distribution. The watt capacity of Each LED

must be >=4 Watt in street light fitting.The Fixture Should be able to be Pole

Mounted and also bracket mounted, provided with high quality driver for protection

against high and low Voltage cut Off, opertional for high amibient and high humid

envirnoments, THD of driver should be less than 10% and P.F > 0.95. Also the

Fixture should meet the following technical criterias Oprating range Voltage 160 to

270 V, system efficiency >= 110 lm/w, and total lumens not less then 4950, CCT >

5000K, CRI > 65, beam angle 120 deg, surge immunity level at least 4 KV integral

and 10 KV non integral

Item Description Rate Amount

No. Quantity Unit

In Figure In Words

The Separate Potted driver should have over current, over voltage protection,

short circuit protection so that the fixture recovers once the fault is removed.

In addition to the above product should be operational in the temperature

range of 0 deg to 50 deg and humidity range of 10% to 90% RH.(Stricly

sample approved by EIC subject to tender specification) (Note:- The

manufacturer/authorized Channel partner of the manufacturer has to submit 5 yrs

free replcement Guarantee for complete Fixture)(Cool White Color/warm

white/natural white (approved by engineer incharge)

14 SITC of Outdoor aesthetically designed LED Street Light Luminaire with total 25.00 Each 6117.00 RS: Six

consumption of Max. 90 W with single piece die cast aluminium housing, high power Thousand One

LED shall be mounted on high quality metal core PCB with extremely precison Hundred

designed heat sink complete with IP66 protection Class with polycarbonate / Seventeen

thoughened glass cover the fixture should be suitable for pole/bracket mounting. The only

fixture to comply both LM79 and LM 80 guidelines with LED module min.

lumen/watt with toughen Glass L70 at 50,000 hrs, provided with high quality

polycarbonate lenses for better light distribution. The watt capacity of Each LED

must be >=4 Watt in street light fitting.The Fixture Should be able to be Pole

Mounted and also bracket mounted, provided with high quality driver for protection

against high and low Voltage cut Off, opertional for high amibient and high humid

envirnoments, THD of driver should be less than 10% and P.F > 0.95. Also the

Fixture should meet the following technical criterias Oprating range Voltage 160 to

270 V, system efficiency >= 110 lm/w, and total lumens not less then 9900, CCT >

5000K, CRI > 65, beam angle 120 deg, surge immunity level at least 4 KV integral

and 10 KV non integral

Item Description Rate Amount

No. Quantity Unit

In Figure In Words

The Separate Potted driver should have over current, over voltage protection,

short circuit protection so that the fixture recovers once the fault is removed.

In addition to the above product should be operational in the temperature

range of 0 deg to 50 deg and humidity range of 10% to 90% RH.(Stricly

sample approved by EIC subject to tender specification) (Note:- The

manufacturer/authorized Channel partner of the manufacturer has to submit 5 yrs

free replcement Guarantee for complete Fixture)(Cool White Color/warm

white/natural white (approved by engineer incharge)

15 SITC of Outdoor aesthetically designed LED Flood Light Luminaire with 20.00 Each 6228.00 RS: Six

total consumption of Max. 90 W with broad single piece die cast aluminium Thousand Two

housing of broad size for better thermal managment (Appr.by EIC) , LED's Hundred Twenty

mounted on high quality metal core PCB with extremely precison designed Eight only

heat sink complete with IP66 protection Class with polycarbonate / Toughned

glass cover. the fixture should be suitable for pole/bracket mounting. The

fixture to comply both LM79 and LM 80 guidelines with high power LED

module min. 130lumen/watt with toughen Glass L70 at 50,000 hrs, provided

with individual high quality polycarbonate lenses for better light distribution.

The Fixture Should be able to be Pole Mounted and also bracket mounted,

provided with high quality driver for protection against mis Wiring,over voltage

high and low Voltage cut Off, opertional for high amibient and high humid

envirnoments, THD of driver should be less than 10% and P.F > 0.95. Also

the Fixture should meet the following technical criterias Oprating range

Voltage 160 to 270 V, system efficiency > 110 lm/w,Operation current 700ma,

and Lumen Output of mini. 9900 Lumes, CCT > 5000K, CRI > 65, seperate

high quality lense,beam angle 120 deg, surge immunity level at least 10 KV

non integral & 4 KV intrgral

Item Description Rate Amount

No. Quantity Unit

In Figure In Words

The Sperate Potted driver should have over current, short circuit protection

so that the fixture recovers once the fault is removed, over voltage protection.

In addition to the above product should be operational in the temperature

range of 0 deg to 50 deg and humidity range of 10% to 90% RH. [Note:-The

manufacturer / authorised Channel partner of the manufacturer has to submit

5 yr free replcement Guarantee for complete Fixture] Model approved by

Engineer in Charge subject to above Specification.[Approval will be given

strictly subject to item specification]

16 SITC of Heavy duty High mast Outdoor aesthetically designed LED 16.00 Each 10911.00 RS: Ten

Flood Light Luminaire with total consumption of Max. 240 W with broad Thousand Nine

single piece die cast aluminium housing of broad size for better thermal Hundred Eleven

managment (Appr.by EIC) , LED's mounted on high quality metal core PCB only

with extremely precison designed heat sink complete with IP66 protection

Class with polycarbonate / Toughned glass cover. the fixture should be

suitable for pole/bracket mounting. The fixture to comply both LM79 and LM

80 guidelines with high power LED module min. 130lumen/watt with toughen

Glass L70 at 50,000 hrs, provided with individual high quality polycarbonate

lenses for better light distribution. The Fixture Should be able to be Pole

Mounted and also bracket mounted, provided with high quality driver for

protection against mis Wiring,over voltage high and low Voltage cut Off,

opertional for high amibient and high humid envirnoments, THD of driver

should be less than 10% and P.F > 0.95. Also the Fixture should meet the

following technical criterias Oprating range Voltage 160 to 270 V, system

efficiency > 110 lm/w,Operation current 700ma, and Lumen Output of mini.

26400 Lumes, CCT > 5000K, CRI > 65, seperate high quality lense,beam

angle 120 deg, surge immunity level at least 10 KV non integral & 4 KV

Item Description Rate Amount

No. Quantity Unit

In Figure In Words

The Sperate Potted driver should have over current, short circuit protection

so that the fixture recovers once the fault is removed, over voltage protection.

In addition to the above product should be operational in the temperature

range of 0 deg to 50 deg and humidity range of 10% to 90% RH. [Note:-The

manufacturer / authorised Channel partner of the manufacturer has to submit

5 yr free replcement Guarantee for complete Fixture] Model approved by

Engineer in Charge subject to above Specification.[Approval will be given

strictly subject to item specification]

17A Painting of street light pole with bracket complete with one coat of zinc 150.00 Each 263.00 RS: Two

coat & two coats of Aluminium paint for following size of pole.[a] up to 6 mtr. Hundred Sixty

17B up to 9 mtr 50.00 Each 332.00 RS: Three

18A Providing & fixing double compressed heavy duty flange type brass cable 250.00 Each 43.00 RS: Forty

gland with rubber ring for P V C insulated armoured cable complete with Three only

outgoing tails, insulating tape etc. For following size cables. For 2 to 4 core x

2.5/4.0 Sq. mm (Sigma, MCI, Comet Make Only)

18B 2 to 4 core 10 Sq. mm 10.00 Each 48.00 RS: Forty

18C 2 to 4 core x 25.0 mm2 8.00 Each 61.00 RS: Sixty

Item Description Rate Amount

No. Quantity Unit

In Figure In Words

19A Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured Copper 100.00 Mtr. 269.00 RS: Two

cable for 1100 volt to be laid 90 cms. Under ground or to be laid 90 cms. Hundred Sixty

Under ground or to be laid on wall with suitable G.I. heavy guage 1.0 mm Nine only

thick cable clamp or in existing DWC pipe underground or road crossing or

floor of following size of cables. (a) For 4 core x 2.5 mm2

19B For 4 core x 4.0 mm2 750.00 Mtr. 361.00 RS: Three

19C For 3core x 10.0 mm2 100.00 Mtr. 495.00 RS: Four

20 Providing & erecting approved make XLPE (IS:7098) (I)-88 ISI mark 380.00 Mtr. 189.00 RS: One

armoured multistrand Aluminium Cable 1100 volt to be laid 90 cms. Hundred Eighty

Under ground or to be laid on wall with 1.0 mm thick G.I. heavy guage cable Nine only

clamp or in existing DWC pipe underground or road crossing or floor of

following size of cables.(a) For 4 core x 25.0 mm2

21A Providing & fixing Solderless crimping type Copper lugs conforming to IS suitable 1150.00 Each 8.00 RS: Eight

for cable of following size evenly crimped with high pressure tool & connected to only

switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (

Dowells,HMI, Comet Make Only ) [a] 1.5/2.5 to 6 Sq.mm

21B For 10.00Sq.mm 40.00 Each 10.00 RS: Ten

Item Description Rate Amount

No. Quantity Unit

In Figure In Words

22 Providing & fixing Solderless crimping type Aluminium lugs conforming to 32.00 Each 15.00 RS: Fifteen

IS suitable for cable of following size evenly crimped with high pressure tool & only

connected to switchgear terminals with brass/cadmium plated nut bolts in an

approved manner. ( Dowells,HMI, Comet Make Only ) 25 Sq.mm.

23 Providing & laying HDPE Double walled corrugated pipes (DWC) (conforming to 1050.00 Mtr. 117.00 RS: One

IS: 16205 (part 24) 2018)) with minimum load required of 450N capacity with anti Hundred

rodent and ultra violet material properties with necessary connecting accessories of Seventeen

same material at required depth to be laid 90 cms. under ground for laying of cable only

below ground / road surface for enclosing cable and back filling the same to make

ground as per original. (A) For Outer dia. 50 mm and Inner dia. 38 mm. ) (Test

Certificate to be Submitted)

Item Description Rate Amount

No. Quantity Unit

In Figure In Words

24 Providing, erecting, testing and commissioning insu intelligent street light 2.00 Each 20255.00 RS: Twenty

controller specially designed for energy saving in conventional street light Thousand Two

system (Cat. No. SLC-03-1 ph-15 KVA-20 Amp. per phase) having technical Hundred Fifty Five

specification, 1 phase, 2 wire, 230 V AC/ph, +/- 25% R Y B N 2 wire supply only

system, 50 Hz (+/- 10%) 2 W (Stand BY) to 4 W (at street light operation)

consumption, Advance 8 bit micro controller, switching on longitude and

latitude base, accuracy of +/- 1 minute per month, with in built battery, with

battery life of more than 8 years, with special device which hold the

parameter for more than 10 year without any power and password protected.

16 characters and two line LCD display with backlight, 4 keys user friendly

keyboard system, 7500/15000 VA feeder pillar capacity, 63/100 Amps

isolator, 3 output with termination, 40/63 Amps 2/3 pole contactor, 3 X

Amp., with FR cable provision to by pass by way of relay operation through

auto/manual switch, 2 to 55 centigrade and humidity 90 % non condensing,

Out door type installation on pole with clamps (Provided with clamps and nut

bolt) or wall or floor, Three locking system flush type internal panel lock,

external pad lock and internal U clamp locking systems for against theft of

Panel, having 25 Kg weight, 16 Gauge MS weather proof box with industrial

exterior powder coated with 7 tank process RAL 7035.Electrical wiring and

control panel for high mast systems motor with up and down facility with

upper and lower limit input. (High and low limit switch and motorized systems

is to be provided with high mast and cable terminated to terminal strip.)

Item Description Rate Amount

No. Quantity Unit

In Figure In Words

25 Supplying and erecting Servo Controlled Voltage Stabilizer (SCVS) as per 3.00 Each 64803.00 RS: Sixty Four

following requirement: (1) Input Voltage Range - Three Phase 340 To 480 Thousand Eight

Volt AC. (2) Out put Volatge-Three Phase 415 Volt AC (Line - Line) with Hundred Three

Voltage Regulation of +/-1%. (3) Frequency range -47 Hz To 63 Hz. (4) only

Efficiency - More or equal to 98%. (5) Type of Stabilizer-Suitable for Balance

& Unbalance Load and Voltage including SPD (6) Controlled Type - Digital

Micro Controller Based Disply. (7) Rate Of Correction - Upto 100 Volt/Sec

(Line - Line) (8) Servo Motor Drive - AC Syncronous Stepper Motor - As per

KVA Capacity, Out put volatge and Voltage regulation requirement. (9) Nil

Wave form Distortion and Effect of Load Power. (10) Responce Time -

milli second. (11) Protection requirements - Input low Cut off protection/Input

High Cut Off Protection /Output Low Cut Off protection/lOutput High

(12) Fault Annuciation Panel LED shows Input present, Input high Input low,

Output Normal, Output High, Outpur low, Overload. (13) Output On time

delay-10 seconds (14) Ambient Tempeature capacity-0-45 RH upto 90%. (15)

Enclosure Type - IP 20 (16) Type of Cooling - Air (17) cabinet/Enclosure :

Cabinet must be made from 1.8mm thick CRCA sheet, Output: Bypass

switch with changeover switch and Provied SPD & 5 year free replacement

guarantee on Stamp paper. Loading and unloading of above item shall be

done by hydra and skill work force under supervision of electrical engineer

and guidelines given by manufacturer to avoid damage to the item. Picture of

it to be submitted in running bill / final bill.Size of door and Ele. room/Pump

room shall be checked by agency's engineer before giving order. giving

order.If found any problem in size discuss with GSPHCL engineer for

rectification before.

(Make - Servomax,Fuji,Krykard,ProtkG)(A) For 15 KVA

Item Description Rate Amount

No. Quantity Unit

In Figure In Words

26 Supplying & erecting IP 55 grade following size section pillar fabricated from 1.00 Each 4531.00 RS: Four

joint less M.S. Sheet with angle iron legs made from jointless M.S. Angle with Thousand Five

cable clamps to be buried in ground to have appropriate erection to work Hundred Thirty

uniform until erected with cement concrete foundation and 45 cm high bricks One only

work finishing with plaster etc. hinged double door internally supported on

both side, with internal and outside looking arrangement with look and keys in

duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is welded and other

with nut and bolt for erecting Bakelite sheet. Painting the Section Pillar inside

and out side with seven tank powder coated paint. section pillar roof should

be without joint with water leakage proof & tested as per IP 55 test & followed

by IS 2147 of 1962 with 4 nos. 100 Amp Copper Busbar (A) 75 X 60 X

cm section pillar fabricated from 16 Gauge MS Sheet with angle iron legs

45 cm long made from 35 X 35 X 5 mm thick MS angle.

27 Providing & erecting approved make ATS panel suitable for following size of 1.00 Each 39831.00 RS: Thirty Nine

3 phase, 415 V., 50 cycles, A.C. diesel generating set complete of scope as Thousand Eight

detailed below: Hundred Thirty

1) Power module: Motorised Changeover switch with ATS controller, One only

Auxiliary contactor with NO & NC contacts with Automatic Battery Charger,

indicating lamps for Generator ON, Mains ON, Load and suitable control

terminals and power terminals with neutral earthing studs.(A) ATS Panel for

15/20 / 25 KVA 3 phase DG Set(make: HPL,socomac, Schnider,Elmeasure)

28 Providing & erecting 240 V MCB double pole switch for motor & inductive 10.00 Each 327.00 RS: Three

load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in Hundred Twenty

existing box having following capacity (A) 40 Amp. Seven only

Item Description Rate Amount

No. Quantity Unit

In Figure In Words

29 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C 4.00 Each 590.00 RS: Five

Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box Hundred Ninty

having following capacity (a) 6 to 32 Amp. only

30A Supplying & fixing box for housing RCCB + MCB combination made of 18 4.00 Each 272.00 RS: Two

SWG sheet steel duly powder coated with gasket, dust & vermin proof Hundred Seventy

bakelite shield two earthing terminals for following type of RCCB, RCCB + Two only

MCB(a) [a] For 2 pole

30B For 4 Pole 4.00 Each 442.00 RS: Four

Item Description Rate Amount

No. Quantity Unit

In Figure In Words

31 Providing ad erecting approved make single phase Double Door metal clad 1.00 Each 1478.00 RS: One

D.B. as per relevant indian standards ammended upto date. Supplying and Thousand Four

fixing following way single phase MCB distrubution board of company Hundred Seventy

fabricated with sheet box with powder coated inside and outside after apply Eight only

seven tank chemical process of MCBDB Door, Back side & Body must be

made of 1.2 mm thick CRCA sheet cover complete with suitable integral

single piece construction tinned copper busbar and link with all necessary

interconnection and with necessary size MS frame for mounting MCBDB.

Manufacturer must be provided (1) IP 43 and as per IS:8623-1 & 3, IEC

61439-1 & 3 having D type PU gasket. (2) Seven tank Powder coating

Certificate (3) Tinned Copper/Brass make neutral & Earthing link with

isolation & Protecting Cover for 240 Volts on surface / recess complete with

loose wire box, terminal connectors for all incoming and outgoing circuits,

with suitable size FRLS PVC insulated copper conductor up to terminal blocks

and internal connection, tinned coppper bus bar, 1 no. tinned copper neutral

link, tinned copper earth bar, din bar, detachable gland plate,

interconnections, powder painted including earthing etc.Single phase

incoming and horizontal single phase outgoing. For 12 Way MCBDB

Item Description Rate Amount

No. Quantity Unit

In Figure In Words

32 Providing & Erecting 2.0 mtr long Earthing system by making minimum 3.00 Each 7025.00 RS: Seven

bore of 225 mm dia in soft soil. Suitable for doing pipe-in-pipe technology Thousand

earthing.Earthing electric rod must be made from Corrosion free Hot dip Twenty Five

galvanizing pipes having following specification. only

(A) Earthing Electrode: outerpipe:- 88 mm minimum O.D., ISI 'B ' Class ISI

mark of Reputed Brand, Inner pipe:- 42 mm minimum O.D., Pipe B Class ISI

mark reputed Brand Terminal Size: 70mm X 100mm length, Terminal Should

be made from inner pipe for that pipe must be pressed and gave rectangular

shape so its work as a terminal.The hot deep galvanising must be done after

above process.Galvanised thickness must be minimum 75 micron any where.

SS Nut bolt:- 2 no.with washer suitable for 14mm dia. hole must be provided

at terminal. total minimum Weight(approx.) of earth electrodewith inside

conductive material minimum should be 26 kg.

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/meter testing as

per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar

(C) Back fill Compound:- Earthing compound should be capable to retain

moisture for long time Back Filling Compound weight is 25 Kg.

(D) Chamber and cover:- Earthing chamber should be size of 400 mm X

mm X 400 mm depth and Cover should be heavy duty cast iron with required

size of 300 mm X 300 mm X 4 mm thick.

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item specification only]

[OEM has to submit all detail & sample for approved before supplying]

[Water must be poured in bore before starting earthing. Earthing value must

be measured with earth tester. Agency has to bring the earth resistance to at

Item Description Rate Amount

No. Quantity Unit

In Figure In Words

33A Providing & erecting Mains with ISI marked, 1.1 KV grade electrolyte multi 50.00 Mtr. 27.00 RS: Twenty

stranded, annealed copper conductor with heat resistant PVC insulated Seven only

conforms to IS:694, IEC - 227 erected in existing pipe of following size

(Specifically for control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, S/S nuts and bolts . (a) One

wire 2.50 sq. mm

33B One wire 4.00 sq. mm 250.00 Mtr. 37.00 RS: Thirty

33C One wire 6.00 sq. mm 25.00 Mtr. 56.00 RS: Fifty Six

33D One wire 16.00 sq. mm 50.00 Mtr. 141.00 RS: One

34 Providing, erecting, fabricating the M.S. structure as per requirement of 150.00 Kg 75.12 RS:

site as per structure design Including proper size approved by EIC of M.S. Seventy Five and

angles, flats, bars, square pipe, channels, sections (Tata, Jindal, Asian, JSI Paise Twelve

Make) complete with cutting, welding, grinding and finishing duly painted with only

Asian/Nerolac make premium quality oil paint and true care red oxide metal

primer,asian paint make with erection on site as per direction of engineer in

charge with necessary grouting cementing, plastering and finishing complete.

All hole opening of square pipe end must be closed with M.S plate welding.

Payment will be done on KG as per Actual weight.

Item Description Rate Amount

No. Quantity Unit

In Figure In Words

35 Supplying & erecting 12 mm thick Hylum sheet on existing 25 x 25 x 3 mm 2.00 Sq. 2289.00 RS: Two

red oxide painted angle iron frame suitable for fixing ICDP / ICTP / DPMCB / Mtr. Thousand Two

FPMCB SWITCH and energy meter (contractor shall make approved drawing Hundred Eighty

of Hylum sheet to arrange required No. of Energy meter & ICDP / ICTP / Nine only

DPMCB / FPMCB switch-busbar etc. as per Actual space available in

electrical room at site)

36 Drilling the road without breaking the road surface (Asphalt) for laying of 80.00 Mtr. 488.00 RS: Four

cable for feeding power supply by making up to following size of holes at both Hundred Eighty

ends complete. (A) Up to 100 mm bore dia Eight only

37 Locating Underground Cable Fault of Underground Cable including 5.00 Job. 6780.00 RS: Six

digging,pin pointing with cable route tracker bu using cable fault location Thousand Seven

equipment like cable fault Van/Vehicle with supportive meters and Hundred Eighty

accessories & doing high pressure testing of cable for checking healthiness only

of cable with suitable equipment after jointing of the faulty cable (excluding

jointing kit) with report of showing distance from main source approx.(a) LT

Cable 35 sq.mm and above

38 Disconnecting the cable connection and Providing straight joint with PVC 8.00 Each 1073.00 RS: One

mould using heat shrink /cast resin type epoxy compound Insulating material Thousand

and making the joint complete using necessary in line connectors, hardener, Seventy Three

earth continuity connection, spacers etc. and reconnecting the same & only

ensure the joint resistance within the limits as per IS.(A) up to 25 Sq mm