Providing of Outdoor Periphery Lighting, Switchyard Lighting Arrangements with LED Luminaries Light Fittings with associated Works in Augmented Switchyard of 132KV S/S Pilibhit, Adjoining Area, Roads in Colony at 220KV S/S Pilibhit under ETD-II, Bly

Amount

Providing of Outdoor Periphery Lighting & Switchyard Lighting Arrangements with L.E.D. Luminaries Light Fittings alongwith associated Works in Augmented Switchyard of 132/33KV S.A.S. Sub Station Pilibhit and Adjoining Area along the Roads in Colony at 220/132/33KV Sub Station Pilibhit, with all Cost of Men, Materials, Misc. Consumables, T&Ps, Transportation of Materials for Satisfactory Completion of the Work as per Technical Specifications and Direction of the Supervising Engineer, as per Details below : (A) Periphery & Road Lighting : (1) Providing, Erection & Grouting of M.S. Round Pole of 9 Meter Long duly made of ‘B’ Class M.S. Pipe (114.3 mm dia. × 4.5 mm × 5.0 Meter + 88.9 mm dia. × 3.65 mm × 2.0 Meter + 76.1 mm dia. × 3.25 mm × 2 Meter) with Base Plate by Concreting in the Ratio of 1:4:8 with Cement, Coarse Sand & 40 mm Brick Ballast Mixture in size of 450 × 450 × 1900 mm and Plastering of 300 mm Length of Concrete above the Ground Level including Excavation, Back Filling, Curing etc. alongwith Earthing of the Pole with M.S. Electrode.

(2) Providing of Junction Box of size 280 × 225 × 150 mm duly made of 16 SWG Sheet and Painted with Smoke Grey Colour Synthetic Enamel Paint and Fitted with 1 No. 6 Amp. SP MCB on Anodized M.S. Channel, 1 No. Bakelite Fuse Fitting with 6 Amp. NS 6 type HRC Fuse, 1 No. Copper Neutral Link, Bakelite Terminal Block of 4 Terminals, Cable Glands suitable for 2C / 4C × 2.5 mm2 size Incoming / Outgoing Control Cables etc., then Installation of Junction Box on M.S. Round Pole at designated Height with the help of suitable M.S. Clamps alongwith Earthing of the Junction Box with 12 SWG G.I. Wire including Cable Terminations with Satisfactory Testing & Commissioning.

(3) Providing & Grouting of G.I. Pipe duly made of 35 mm dia. 2.5 Meter Long ‘B’ Class Pipe and Bent at One End by Quarter Circle in 0.5 Meter through Concrete Plinth for Safe Entry of Cables in the Junction Box duly installed on M.S. Round Pole.

(4) Providing & Fixing of G.I. Pole Bracket duly made of 40 mm dia. 1.2 Meter Long ‘B’ Class Pipe and Bent at One End by Quarter Circle in 1.0 Meter at an Angle of 300 for Fixing of 125 Watt LED Street Light Luminaries Fittings on M.S. Round Pole with help of M.S. Clamps.

(5) Providing & Fixing of 125 Watt L.E.D. Street Light Luminaries Fittings of Philips / Compton Greaves / Havells make in Single Piece Die Cast Aluminium Alloy Housing with Pot Optics Reflector & Toughened Clear Glass Cover with Frame for Lamp Compartment inlcuding Cable Terminations.

(6) Painting of M.S. Round Pole with one Coat of Red Oxide Primer and two Coat of Zinc Rich Aluminium Paint of 1st Quality of Asian / Nerolac / Burger.

(7) Making of 3 No. Strips of 50 mm width at the Height of 450 mm from the Plinth with P.O. Red Colour in Botton & Top Strips and with White Colour in Middle Strip on each M.S. Round Pole, then Making of 150 mm dia. Circle and Writing the No. of the Pole in the Circle. (No. per Pole)

(B) Switchyard Lighting : (1) Providing of Junction Box of size 280 × 225 × 150 mm duly made of 16 SWG Sheet and Painted with Smoke Grey Colour Synthetic Enamel Paint and Fitted with 1 No. 6 Amp. SP MCB on Anodized M.S. Channel, 1 No. Bakelite Fuse Fitting with 6 Amp. NS 6 type HRC Fuse, 1 No. Copper Neutral Link, Bakelite Terminal Block of 4 Terminals, Cable Glands suitable for 2C / 4C × 2.5 mm2 size Incoming / Outgoing Control Cables etc., then Installation of Junction Box on G.I. Column Structures at designated Height with the help of suitable M.S. Clamps alongwith Earthing of the Junction Box with 12 SWG G.I. Wire including Cable Terminations with Satisfactory Testing & Commissioning.

(2) Providing & Fixing of G.I. Pole Bracket duly made of 40 mm dia. 1.2 Meter Long ‘B’ Class Pipe and Bent at One End by Quarter Circle in 1.0 Meter at an Angle of 300 for Fixing of 125 Watt LED Street Light Luminaries Fittings on G.I. Column Structures with help of M.S. Clamps.

(3) Providing & Fixing of 125 Watt L.E.D. Street Light Luminaries Fittings of Philips / Compton Greaves / Havells make in Single Piece Die Cast Aluminium Alloy Housing with Pot Optics Reflector & Toughened Clear Glass Cover with Frame for Lamp Compartment inlcuding Cable Terminations.

(C) Cable Lying & Termination : (1) Providing of 3 Phase L.T. A.C. Supply Cubical of size 1200 × 600 × 300 mm with Hinged Door and Painted with Smoke Grey Colour Synthetic Enamel Paint and Fitted with 3 No. 100 Amp. Copper Neutral Link, 4 No. 100 Amp. Aluminum Bus Bar (3 Phase + Neutral), 5 No. 32 Amp. TPN MCB, 6 No. 40 Amp. DP MCB, 40 No. Link type Terminal Bock, Cable Glands etc. with Internal Wiring and then Installation on M.S. Angle Frame Structure which shall be duly Grouted in the Ground by due Construction of Concrete Plinth.

(2) Earthing of L.T. A.C. Supply Cubical with Providing & Fixing of 600 × 800 × 8 mm size G.I. Plate with its Top At Least 3 Meter below the Ground Level with 20 mm dia. G.I. Pipe & Funnel for Watering, 1 No. 8 SWG G.I. Wire Earthing Lead etc. with Alternate Layer of Charcoal / Coke and Salt At Least 150 mm Thick Around it.

(3) Laying of Following sizes PVC insulated Copper Control Cables from L.T. A.C.D.B. Cubical to various Junction Boxes & Junction Boxes to Junction Boxes for Switchyard Lighting through Excavated Trench of size 300 × 600 mm, Covering the Cables with River Sand & Brick Lining Along and Over the Cable, then Back Filling & Leveling of the Trench after Laying of Cables : (a) 4C × 2.5 mm2 size Control Cable

(b) 2C × 2.5 mm2 size Control Cable

(4) Laying of 2C × 2.5 mm2 size Control Cables form Junction Box to LED Street Light Luminaries Fittings through Inside the M.S. Pole / GI Structure including necessary Fixing of Cable on GI Structure.

(5) Laying 3½ × 70 / 50 mm2 LT Power Cable, 50 cm below the Ground Level after Excavation of Trench, Laying the 1st Class Brick Lining, Filling of River Sand Along & Over the Cable, then Back Filling & Leveling the Trench after Laying of Cable. The Work also includes Termination of Cable on both sides with Crimping of Lugs.

(6) Providing & Fixing of Cable Marker duly made of Cast Iron.

Versha and Brothers

TIRUPATI ELECTRICALS