DED-64 25-26

25 KVA DTR

Distribution Transformer (Ordinary), 11/0.4 kV, 25 KVA

Muffs (2000mm) with concerete filling

X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for incomer line

MS Angle Iron (50X50x6 mm), Length: (2800 mm) x1 Nos for LA's

X-Arm: [Channel Iron (75x40x6 mm), Length : (2800 mm X 4 Nos] for supporting DO fuse unit & GO switch

X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for Transformer Bed

X-Arm [Channel Iron (100x50x6 mm), Length : (460 mm) x 2 Nos for supporting Main Channel of Transformer]

MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos

MS Angle Iron (35X35x6 mm), Length : (460 ) x 2 Nos

MS Angle Iron (50X50x6 mm), Length : (950 mm) x 2 Nos for Bed Knee Bracing

MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos

MS Angle Iron (50X50x6 mm), Length : (450 mm) x 1 Nos

GO Switch Handle Supporting: [Channel Iron (75x40x6 mm), Length : 460 mm

GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type

D.O Fuse Unit

Surge Arrester, 9 kV Station Class (Porcelain Type)

Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.)

Stay set complete (i/c Stay Clamps)

Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set)

Pipe Earthing Set and

6 SWG GI wire For Earthing

LT Distribution Panel Box with MCCB(40A, 25 kA, 4P) and SFU(16A, 4No, rewirable) (Panel should be CPRI Approved)

Half Clamp (M.S. Flat 50X6 mm)

Full Clamps (M.S. Flat 50X6 mm)

Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more (with flat and spring washers)]

Aluminium Thimble

Copper Thimble 200 Amp

Danger Plate

Barbed Wire

LT Cable (3.5 Core) 35 mm²

Energy Meter (3-Phase, 4-Wire) DLMS compliant 50 A CT Type for 25KVA Transformer

Aluminium Paint.

Red Oxide

LT Switched Capacitors 9- KVAr for 25 KVA (rate per KVAr)

Chain Link fencing , Angle Iron ,Gate etc for transformer fencing (Ref Civil Work)

Add Erection Charges Complete in all respect

Add Transportation Charges Complete in all respect

11 KV HT Line

Muffs (2000mm) with concerete filling

Belt Set - MS Angle Iron: 50x50x6, Length :1800 mm x 2 No.

X-Bracing Set - MS Angle Iron: 50x50x6, Length: 2125 mm x 2 No.

X-Arm (Horizontal) - MS Channel Iron C type: 100X50x6, Length: 2340 mm x 2 No.] ∆ Formation

Discs insulator sets on Dead End structures (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps, Straight stapples & Bend Stapples etc.) x (3 No. conductors) x (2 No. sides)

X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length: 2600mm x 2 Nos

Prov. G.O Switch

Prov. D.O Fuse Unit

11 kV Pin Insulators (Porcelain, 12 kV, 10 kN): 3 No per double pole structure

Stay set complete in all respect (i/c Stay Clamp) (1No./ Single Pole , 4 No. / Double Pole Structures)

Stay Wire (7/3.15 mm) (10.0 kg Per Stay Set)

HT Earthing set complete

Single Continous Earth wire (GI, 8 SWG) {alongwith 2 wire lengths for avg. one road crossing @ 20 m & Additional 3% (Sag, Earthing, Cross lacing above road & wastage)} @ 0.102 kg/m

Eye Hook for earth wire

Half clamps: [On Double Pole Dead End structure: 4 No; On Run Thro' structure: 2 No ]

Full clamps: [On Double Pole Dead End structure: 4 No, Single Pole Run Thro' structure: 2 No]

Danger Plate (250X200X1.6 mm)

Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more (with flat and spring washers)]

Barbed Wire

Red Oxide

Aluminium Paint

Add Erection Charges Complete in all respect

Add Transportation Charges Complete in all respect

Please Enable Macros to View BoQ information