SPECIAL REPAIRS TO BLDG NO NP - 25(OFFICERS MESS) OFNO 1 INF BN, INF LINES JAMNAGAR MIL STN

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area exc 1.5 sqm but n.exc 4.0 sqm all as specified and as directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frames.)not excceding 1.5 Sqm each.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc.

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L 50 mm thk Cement concrete type C2 , 1:3:6 as in subbase.

Virified Ceramic tiles dark shade 10 mm thick dark shade (square/rectangular) polished, area of each tiles not exceeding 0.36sqm, in floors etc. Set over 15mm thick cement screed in CM 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L Glazed ceramic coloured designer tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match 0ver 10mm thick plaster in cement mortar (1:3).

M & L for joint free Non skid coloured ceramic tiles 7-8mm thick area of each tiles exceeding .06 Sqm but not exceeding .11 Sqm, in floors etc. set and jointed in neat cement slurry mixed with water proofing liquid compound and pointed in white or coloured grouting chemical to match , over 15mm thick screed bed in CM 1:6

M&L 20mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, incl 15 mm thick screed bed in CM 1:6 all as specified and directed.

S&F Machine pressed precast Concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 grade all as specified and directed.

M/L sand cushing/filling under paver block as specified and directed.

Demolition of Brickwork or stone/boulder, built in cement mortar including all quoins, arches, pillars complete all as specified.

M & L Pre-cast cement concrete block type C 1 ,1:3:6 (20 mm graded aggregate ) kurb with solid blocks exc 10 cm in width and setting in mortar (1:6) completed as directed.

M&L for rendering 15mm thick in CM 1:4 the external surfaces of brick work/Strone or concrete surface finishing fair and even without using extra cement.

M&L preparation of New plastred surfaces, applying 3 coats of white wash on walls.

S&F Anodised Alum powder coated of any colour deco grill of 6 mm dia (powder coating not less than 50 micron) all as specified and directed at site.

S&F Aluminium anodised powder coated (powder coating not less than 50 micron) frame for doors, window & ventilators with shutter ,side hung type with out sash bars, including frames necessary joining cleats, glazing clips, anodised aluminium snap beading, screws, bronze anodised alumuminium fittigs such as stays, hinges type B-21 100 mm long suitable handle and locking system etc. glazing cleats, neoprene rubber beading fixed in frames (Neoprene rubber beading/Glazing will be measured and paid separately) complete all as directed by Engr in charge.

S&F Neoprene rubber beading/packing complte all as directed by Engineer in Charge.

S&F Sheet glass, ordinary quality in square n exc 0.50 Sqm each pane, 4mm thick fixed to Alumn section.complete

S&F Stainless steel wire cloth,0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples (SS grade 304 ) complete all as specifiedand directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

Taking down cement or cement lime plaster of any description on brick or stone walls,etc.incl raking out joints,hacking for key, scrubbing down with water ,etc.

M&L for Rendering 10 mm thick in CM (1:6) on fair faces of brick/concrete wall surfaces, finished even and smooth without using extra cement.

M&L complete removal of existing treatment by washing, rubbing down and stopping of distempered and cement base painted surfaces on wall complete all as specified and directed.

M&L preparation of walls/ceiling and applying two coats of OBD/Exterior emulsion paint 0n 0ne coat of primer and 3 mm thick birla white putty all as directed as in repairs.

M&L preparation of old painted surfaces of wood/ wood based materials applying one coat of synthetic enamal paint of any description complete all as specified.

S & F 35mm thick factory made second class hardwood, kiln seasoned and chemically pressure treated plain framed, pannled shutter (two panel) with lock rail and panel of 9mm thick BWP commercial ply or 12mm veneered particle bord with commerical venering on both face complete all as directed by Engr in Charge.

S & F 35mm thick 2nd class hardwood factory made glazed & skeleton door shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) complete all as specified.

S&F Aluminium (Die cast) body Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete.

S&F 2nd class Hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints.

S&F Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

S&F extruded aluminium butt hinges 100mm long, type c-21.

S&F 250 mm long aliminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium complete all as specified and as directed.

S&F Extruded aluminium alloy handles 150mm long, fabricated type, anodised.

S&F Aluminium anodised barrel tower bolts, 200 mm long, of extruded section.

Taking down 20 mm bore steel water tubing and connection from wall and floor complete all as per directed including cleaning for refixing or removal from site.

S&F 20 mm bore steel water tubing and connection medium grade including laid in trenches complete all as specified and directed.

S&F in reapirs 8mm mm thick bevelled edge looking mirror of size and shape as required at site and directed by Eng-in-charge .

S&F in Repairs Curtain Rod stainless steel Decorative pattern colour as approved by AGE

S&F in Repairs SS Curtain Rod Bracket decorative type

S & Fin repairs two piece EWCs 'S' trap size 710x370x810mm Ivory colour with flushing cistern, seat cover, twin flush fittings (Cruse). Cat No. 2018, 2118,2328 & 2218. Make :- Cera

S&F in Repairs Table top Wash hand basin decorative pattern including bottle trap and all necessary fittings.make Jaquar cat No LYS-WHT-0555 or equivalent

S&F PVC connections 15 mm size with PTMT nuts of length 450mm

S & F in repairs Fancy type Quarter turn (Cera Delta) angle cock with wall flange. Make: Cat No. CQ 108. Make :- Cera

S & Fin repairs Toilet paper holder .make :Cat No. CA 106. Make :- Cera

S&F in repairs Brass CP three way wall Mixer for mixing hot & Cold water screwed down for iron pipe and fixed.make :Series Mist Cat No:8575 Prayag (Make: Prayag,Jaquar,Cera)

S&F in repairs Brass CP Central hole Basin Mixer without Pop-up, fixed to iron pipe .make :Series Mist Cat No:8550 Prayag (Make: Prayag,Jaquar,Cera)

S & F in repairs brass chromium plated over head shower with arm 255 mm with flange size fency type with or without swival joints any size including fixing to steel pipe 15mm bore unions.make:Series:Tranquil Code No: BS-73 Prayag (Make: Prayag,Jaquar,Cera)

S&F in Repairs Health Faucet with 1.50mtr tube & Hook any description including flexible attachment Make Prayag or equivalent Cat No:BEA-41 Prayag (Make: Prayag,Jaquar,Cera)

S & F in repairs Fancy type Quarter turn (Cera Delta) 2-Way bib cock with wall flange and aerator.make :Cat No. CQ 106. Make :- Cera

S&F in Repairs Soap dish, any type, fixed to plugs with chromium plated brass screws

S&F in Repairs glass self of any type 300 mm long .

Dismantling water tank 500 ltr capacity

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. 500 ltr capacity

S&F 25 mm bore Ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brassferrule and fixed

M&L Cast iron floor trap ,with grating including jointing to waste pipe fixed in cement concrete B1(1:2:4) dia 50mm

Dismantling plain or corrugated steel sheeting any gauge or thickness or similar pattern roof coverings

M & L pre painted galvalume aluminium zinc coating gi based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall ,fixed with self tapping screws as specified.

Taking down carefully aluminum /copper point wiring (light, fan, switch & power) complete including fittings such as switches, ceiling rose, pendent, by unscrewing from board ,out let box, fitting and fixture such as bulk head fitting, sketch fittings and making good the disturbed rurfaces of walls floors etc all as directed.

M&L for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits),with multi stranded copper conductor 1.5 sq mm nominal cross sectional area, single core, pvc insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No in and including medium grade, PVC Concealed conduit of dia not less than 20mm and conduit accessories concealed in wall(Brick/stone masonary), ISI marked with valid CML No (IS-9537-1983 for conduits and IS: 3419:1976 for conduit accessories), with modular metal flush boxes & cover plate with frame of white colour of suitable size as required at site; including PVC insulated multi stranded copper conductor 1.5 sqmm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth duly complete including replastering and making good the surface of wall and painting with existing colour all as specified and directed at site for the following :

One light/ Fan point controlled by one way switch.

One 5 Amps socket on same board with other switches.

One 5 Amps socket on independent board.

All as per item No-2 here in above but 2.5 Sqmm stranded copper conductor and independent board for 15 Amps switch/ socket point as directed.

S&F modular switch piano flush type single pole one way 6/10 Amps,1 module

S&F moduler socket 6/10 Amps -2/3 pin combined 2 module,

S&F modular switch piano flush type single pole one way 16/20 Amps,1 module

S&F Modular socket 6/16 Amps 2/3 Pin combined 2 module

S&F modular fan regulator Step type 120W 2module ISI marked complete all as specified and directed.

S&F ceiling rose surface backelet ISI marked 2 to 3 terminal all as specified.

S&F lamp holder insulated body with back plate for battern fittings.

Supply& Fixing LED batten fittings 4ft 20 Watt (Min 1900 lumens) with clamps incl PVC gutties and flexible wire and connecting to ceiling rose complete . Model Wipro Garnet 20W , D562065 of Wipro or Eq model in Philips/Jaguar

Supply& Fixing LED Batten fittings 2ft 10 Watt (min 800lumens) with clamps incl PVC gutties and flexible wire and connecting to ceiling rose complete . Make:.Wipro Garnet D561065 or eqvt in Jaguar/Philips

Supply& Fixing LED Batten fittings 1ft 5 Watt (min 380 lumens) with clamps incl PVC gutties and flexible wire and connecting to ceiling rose complete . Make:.Wipro Garnet D560565 or eqvt in Jaguar/Philips

Supply& Fixing LED Retrofit lamp 9 Watt white 6500K cool day light Minimum lumens 800 in angle holder complete. Make:.Wipro Garnet or eqvt in Philips/Jaguar

S&F recess mounting LED panel 15 W luminaire white powder coated CRCA housing with LEDs seamless front frame with flat white high transmission acrylic cover.Make: CG cat no. LSCSM-15W-CDL/WW or eqvt in Wipro/Bajaj/Philips

M&L for sub main wiring with two runs of 4.00 Sqmm single core FRLS PVC unsheathed and insulated 1100 Volt grade/Multi stranded copper conductor drawn through PVC conduit and accessories concealed in walls, ceiling floors etc including one run of PVC insulated and unsheathed cable of copper conductor of 4.00 Sqmm single core as earth continuity wire all as specified and directed. Note :- Two runs of single core PVC insulated unshethed cables and one run of earth continuity conductor incl conduit will be messured and paid as one unit length only.

M&L for sub main wiring with two runs of 6.00 Sqmm single core FRLS PVC unsheathed and insulated 1100 Volt grade/Multi stranded copper conductor drawn through PVC conduit and accessories concealed in walls, ceiling floors etc including one run of PVC insulated and unsheathed cable of copper conductor of 6.00 Sqmm single core as earth continuity wire all as specified and directed. Note :- Two runs of single core PVC insulated unshethed cables and one run of earth continuity conductor incl conduit will be messured and paid as one unit length only. Make:Havells/Finolex/Polycab

Taking down & refixing of existing water heater geyser 25 Ltr capacity Geyser,vertical type with complete accessories in same location after completion of bldg repair.

Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in grond (earth pit not less than 2.25 mtrs below normal ground level) with the top edge of the plate not less than 1.5m below the normal ground level connected to GI wire 4.00mm dia protected by 15mm bore GI pipe (light grade) and watering pipe 20mm bore GI pipe(light grade) and PCC Pit (1:3:6) type C1 using 20mm graded stone aggregate with RCC cover including excavation and earth work and removal of surplus soil complete all as shown in electrical plate No-3 of SSR part-I and as specified including earth plate packed around with charcoal dust common salt complete including GI sheet funnel, wire mesh, earth lead wire 4mm dia and earth lead connected to earthing test point/ main board. The GI earth wire 8 SWG under the earth and on pole/db upto a height of 1.5m shall also be protected by 15mm dia GI pipe (light grade ) and the GI pipe to be fixed with poles/wall by means of 02 Nos. FI clamp 25x3mm with nuts bolts and washer etc. complete all as specified and directed by Engineer-in-Charge. Note :- GI earthing wire of same size upto 7.5m shall deemed to be included into quoted rate

S & F Sheet metal enclosures with socket plug top and single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20Amp MCB SP of 240 volts.

S&F in repairs Post top lattern light fitting die cast aluminium graphite grey powder coated spigot, acrylic clear diffuser,opal acrylic diffuser provided at LED area to minimize glare for LED System wattage 35/45W with LED Color temperature 3000k + 300k complete with accessories including wiring with copper wire of 2.5sqmm from junction box to fitting complete all as specified and directed by Engr in charge.Make: BGCT W4 LED WW of Bajaj or eqvt in wipro/philips

S&F in repairs' SKYLUX' surface mounting LED troffer 36 W 2feet X 2feet cool day light luminaire white powder coated CRCA housing with LEDs seamless front frame with flat white high transmission acrylic cover.Make: BZSSQL 36W WH/NW of Bajaj or eqvt in Wipro/CG

S&F in repairs' SKYLUX' recess mounting LED troffer for POP ceiling 34 W 2feet X 2feet cool day light luminaire white powder coated CRCA housing with LEDs seamless front frame with flat white high transmission acrylic cover.Make: BZRSQL GX 34W CW of Bajaj or eqvt in Wipro/CG

Supply and fixing Plastic body ventilator fan Ivory colour 250 mm sweep AC, 240 volts fixed as per manufacturer instruction, connecting with and including 1.5 Sqmm copper conductor, PVC insulated and PVC sheathed three core cable including provn of hole and aluminium frame etc for fixing the fan as required at site complete. Make :Orient / Crompton/ Havells/Bajaj

VINUBHAI P. CHANDRA

SURAJ ENTERPRISE

SHAM AND CO

M/S Badri Electicals

Suraj Builders