REPAIR TO ALUMINIUM WORK AND ROOF TREATMENT INCL REPAIR TO CHAJJAS AND OTHER MISC WORK IN ZONE-II UNDER GE (WEST) BAREILLY.

S&F Anodised aluminium frame for doors, windows, ventilators and kitchen cupboards frame with one or more rebates including joining cleat for fixing etc. complete all as specified add for powder coating (minimum thickness of powder coating 50 micron) complete all as specified and directed.

S&F Anodised aluminium door shutters aluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed add for powder coating (minimum thickness of powder coating 50 micron)

S&F in repairs alumunium patition panels/ composite panels/ACP sheets fiexed on aluminium frames or on sliding aluminium frame work with aluminium glazing clips/ beading as in cupboards, partitions etc and size and colour shall be finalised by GE complete all as specified and directed

S&F in repairs aluminium powerded coated (minum 50 micron) anodised partition wall with aluminium frame of size :- (a) Single Groove Section: 82.50 mmx 38mm x 1.20 mm thick (b) Double Groove section: 82.50mm x 38mm x 1.10 mm thick duly fitted with neosprene rubber beading,frosted glass panes 4.8 mm nominal thickness or 12mm thick prelaminated melamine faced both sides decorative, exterior grade type II particle board panels including securing with 'U' channels at top joining partatio complete all as specified and directed

S&F in repairs powder coated aluminium sliding windows frame with movable shutter (sliding on minimum two PVC roller of best quality) for each shutter on three tracks or two track as required with stainless steel mosquito proofing and glazing shutter and including glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clips, frame made with aluminium section as appended below- (i) Window frame of minimum size : 92mm x38 mm X 1.5 mm thick for three tracks. (ii) 63mm x38 mm X 1.15 mm thick for two tracks. Note : The rate for glass & wire mesh shall not be paid separately. complete all as specified and directed

S&F Anodised aluminium window, ventilator shutters and kitchen cupboards, side hung type/ slidding type without sash bars, alumimium section weighing 0.55 kg/m including necessary joining cleats glazing clips, ruber packing, anodised aluminium snap beading screws anodised aluminium fittings such as ped stays 150mm long (1 No) hinges type B-21 100mm long (2 No) suitable handle (1 No) complete all as specified for add powder coating (minimum thickness of powder coating 50 micron) complete all as specified and directed

Repair of aluminium door/window/ ventilator/ partition wall etc of any size / any number of panels including taking down (if required) & refixing for easy closing/ opening/ tightening of hinges or changing the position of hinges, adjustment of floor door spring of hydraulic door closure, adjustment of tower bolts, sliding bolts etc changing of mortice lock complete all as specified and directed

Dismantling of roof terracing, cement mortar, brick padding, concrete (un-reinforced) alongwith existing water proofing treatment of any thickness in any position and of any portion from top of roof of building, cleaning surface of roof with wire brush / mechanical brush and with water thoroughly to remove all loose dust / dirt and loose particles to expose base concrete roof slab and removal of rubbish / demolished material outside of MOD land complete all as specified and directed.

M & L for providing PCC 1:2:4 Type B-0 (using 12.5 mm graded stone aggregate) as in levelling course, haunching, coping, curved filllet and similar works of over RCC roof surface including rounded or chamferred on edges complete all as specified and directed.

M & L for rendering 15 mm thick cement plaster in cement mortar 1:3 including mixing of liquid water proofing compound @ 200 ml per 50 kg of cement over concrete roof surface finished even and smooth without using extra cement complete all as specified and directed. Note- water proofing compound shall not be paid separately.