Replacing Existing old by Providing Energy saving luminaires, BLDC Fan ,pressure pumps, at Various Building under Juridiction of J.C.Electrical Sub Dn Ahmedabad ( for The Purpose of Energy Saving in Government Building )

Work Name - Replacing Existing old by Providing Energy saving

luminaires, BLDC Fan ,pressure pumps, at Various Building under

Juridiction of J.C.Electrical Sub Dn Ahmedabad ( for The Purpose of Energy

Saving in Government Building )

Sr. No. Item Qty. Unit Amount Place

o o NIL NIL NIL NIL NIL

Contractor's signature Deputy Executive Engineer

J.C Electrical Sub-Division

R&B Deptt., Ahmedabad.

Executive Engineer

Ahmedabad Electrical Division-1

R&B Deptt., Ahmedabad.

Work Name - Replacing Existing old by Providing Energy saving luminaires, BLDC Fan ,pressure pumps, at Various Building under

Juridiction of J.C.Electrical Sub Dn Ahmedabad ( for The Purpose of Energy Saving in Government Building )

Item Rate in Rate in

Qty. Unit Item Description Per Amount

No. Figure Words

Providing and erecting Mains with 1.1 kV grade FRLS PVC insulated

ISI marked stranded Copper conductor wire in following type of pipe Rupees

to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm Seventy

copper conductor FRLS PVC insulated stranded wire of green colour Eight And

1 510 Mtr 78.78 Mtr

for earth continuity of following size (A) With medium class Rigid Paise

PVC pipe and accessories (a) 2 wire 1.5 sq. mm Seventy

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 kV Grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected with 6A Modular type switch and hum free EME step type Rupees

electronic fan regulator mounted and accessories with earth Seven

continuity of following type erected on PVC / Metallic/Wooden box, Hundred

2 56 Pt single mounting base frame covered with textured/metallic/white 765.58 Sixty Five Pt

front plate modules erected on / in wall / ceiling as per pipe erected. And Paise

with necessary ceiling rose / H.D.Connector as directed.(a) with Fifty Eight

medium class Rigid PVC pipe and accessories erected flushed on Only

wall/ceiling complete Cat. III

Replacing Existing old & U/S By Supplying and erecting Flexible PVC Rupees

insulated multi strand multi core 1.1 kV grade ISI marked copper Fifty Eight

3 75 Mtr wires of following size to be erected as directed.(e) 1.50 Sq.mm 3 58.58 And Paise Mtr

core round PVC sheathed Fifty Eight

Energy Saving Estimate 2 /

Item Rate in Rate in

Qty. Unit Item Description Per Amount

No. Figure Words

Replacing Existing old & U/S By Supplying & erecting approved

make SMC press moulded composite FRP. loop-in, loop-out approx. Rupees

2mm thick box complete with Bakelite connector strip Four

5way(3P+N+E),DIN rail for mounting mob & hinged doors as per Hundred

4 39 Nos requirement having locking arrangements with mounting clamp 476.72 Seventy Six Ea

with nuts, bolts & washers suitable for erection on pole with cable And Paise

clamps& earth bolt of following size of box.(C)150mm x 125mm x Seventy

100mm [deep] Two Only

Replacing Existing old & U/S By Supplying and erecting B class

galvanised iron pipe 32 mm outside dia 45 cm long duly welded on Rupees

20 cm x 20 cm x 3 mm thick M.S. base plate, erected on wall or corner Three

for mounting street light luminaire with necessary hardware Hundred

5 3 Nos 343.4 Ea

materials duly painted. Forty Three

Replacing Existing old & U/S Supplying & erecting approved make

Digital time switch having lithium cell 6 years operative and operate Rupees

battery backup 1 channel day clock with 14 memory programme, Three

suitable to operate on 240V + 5%, 16A with, floating contacts Thousand

Minimum switching setup time 1 minimum & LCD display. Also One

6 6 Nos comprised permanent ON/OFF switching. Programming switches & 3168.37 Hundred Ea

housed in fire proof thermoplastic enclosure & transparent cover Sixty Eight

erected as required with necessary connection erected as directed. And Paise

(old-5 , New-1) Thirty

Energy Saving Estimate 3 /

Item Rate in Rate in

Qty. Unit Item Description Per Amount

No. Figure Words

Replacing Existing old & U/S Supplying & erecting power contactor

,AC3 duty for time switch complete erected as per direction Cat III

(C) 4 pole 440V 16 Amp. (old-5 , New-1)

7 6 Nos 857.49 Fifty Seven Ea

Replacing Existing old & U/S By Providing and erecting FRLS-XLPE

(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium

conductor for 1.1 kV. to be laid on wall with necessary clamps or in

8 180 Mtr existing trench / pipe of following size of cables(A) 4 core 4 Sq. mm 140.39 Mtr

(old-165 Mtr , New-15 Mtr )

Providing & laying approved make Double walled corrugated pipes Rupees

(DWC) of polyethylene(conforming to IS 14930 II )with necessary Sixty Two

9 160 Mtr connecting accessories of same material at required depth in 62.62 And Paise Mtr

existing trench for laying of cable. below ground / road surface for Sixty Two

enclosing cable (A)50 mm outer dia Only

Making trench in soft soil of suitable width of 90 cm deep for laying Fifty Five

10 120 Mtr cable or locating the fault all over the run and back filling the same 55.55 And Paise Mtr

and making the surface as normal ground. Fifty Five

Energy Saving Estimate 4 /

Item Rate in Rate in

Qty. Unit Item Description Per Amount

No. Figure Words

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm Seventy

or required depth for laying any size of cable or locating the fault all Four And

11 40 Mtr 74.74 Mtr

over the run and back filling the same and making the surface as Paise

normal ground. Seventy

12 40 Mtr (B) If additional machinery like hammer driller or JCB use [Add] 357.54 Fifty Seven Mtr

Replacing Existing old & U/S By Supply, Installation, Testing and

Commissioning of suitable sweep, BEE 5 Star rated, Ceiling fan with

Brush Less Direct Current (BLDC) permanent ferrite magnet Motor,

class of insulation: B, Rust free 3 nos.Aluminium blades, 2 nos.

canopies, shackle kit with earthing provision, copper winding, Rupees

Power factor not < 0.9, Service Value (CMM/W) minimum 6.85, Air Two

delivery minimum 215 CMM, 350 RPM,230v (tolerance as per IS : Thousand

374-2019), THD < 10%, compitible with electronic regulator unit for Six

13 706 Nos Speed Control and all remaining accessories including safety pin, nut 2629.03 Hundred Ea

bolts, washers, temperature rise = 75 °C (Max.), suitable for 140 to Twenty

285 Voltage and rectifier circuit with surge, over current and Nine And

overload protection , 50 Hz, Single phase AC Supply, earthing etc. Paise Three

Complete as required.[ Make shall be approved by Engineer in Only

Charge] (A) 1200 mm Sweep (48")

(old-650, New-56)

Energy Saving Estimate 5 /

Item Rate in Rate in

Qty. Unit Item Description Per Amount

No. Figure Words

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S.

Pipe down rod erected duly painted for fan complete with proper Rupees One

insulation without leakage and earthing. Hundred

14 158 Mtr (old-133 Mtr, New-25 Mtr ) 108.07 Eight And Ea

Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm M.S. Rupees

Bolt & Nuts erected with necessary hook of 10 mm M.S. Round Bar. Ninety

Replacing Existing old & U/S By providing and erecting Miniature Rupees

circuit breaker single pole 0.5A to 2A system and having breaking Two

capacity 10 KA to be erected in existing box. confirming to IS Hundred

8828/1996 with ISI Mark Cat.III Ninety

Energy Saving Estimate 6 /

Item Rate in Rate in

Qty. Unit Item Description Per Amount

No. Figure Words

Replace old & U/S LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB , with housing used as a heat sink shall

be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die

cast powder coated and high U.V. & corrosion resistance with diffuser

with company mark/name LED batten with Microwave motion technology

in which occupancy within 5m radius & 120° angle to the sensor, the Rupees Six

luminaire works at 100% of defined output specification and if no

occupancy detected within specified range, the luminaire stays at

17 259 Nos 666.6 Sixty Six Ea

occupancy mode for the first 180 to 300 seconds and then luminaire will

be turn OFF and providing an energy-efficient solution which has And Paise

specifications: 160V to 270V, Power Factor >/= 0.90, THD </=15%, CCT Sixty Only

3000 to 6500 K, CRI >/=80, Luminaire efficacy> 130 lumens/watt , and

Average life L70B50: 50000 hours (A) Tube Light with integral driver (iv)

20 Watts, Surge - 4KV,IP-20, conventional 1150 to 1200mm. (old

Convectional Tube-52 Nos+Old LED Tube-207 Nos )

Replacing old & U/S by Supplying and erecting 15 Watt LED Dimmable

Sensor cum Driver indoor Downlight fittings as per feature(1) with LEDs

of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. &

corrosion resistance with diffuser housed in aluminium casted body (2)

Motion based On-off-Dim operation(in built) (3)Adjustable detection area

50%/100%(4)Adjistaboe hold time 5s/1min/10min (5)Dimmimng %- Five

10%to 30% (6) Operating voltage range 198 to 264 AC (7) Power factor Hundred

more than 0.90 (8) Driver Efficiency more than 85% (9) Inbuilt surge Sixty Five

protection 4 KV (10) CCT 3000k to 6500k (11) Fixture efficacy more than And Paise

100 Lm/w (12) Sensor detection area 6 meter dia. (13) Square/ CFircular Fifty Only

shaped Surface/Recessed Mount Downlight with provision for spring

loaded mounting clips complete. Ip20 (14) with LM79 & LM80 Certificates

fitting requaired

(old-682 LED Downlight)+(old LED Tubelight-1061)

Energy Saving Estimate 7 /

Item Rate in Rate in

Qty. Unit Item Description Per Amount

No. Figure Words

Replacing old & U/S Dimmable LED street light / Flood light

fittings with High power White LEDs wattage of 1 Watt and above

assembled on single MCPCB, efficiency more than 100 lm/w and

corrosion free High pressure die cast aluminum housing with smooth

finish powder coated and heat sink extruded aluminium with

diffuser and Polycarbonate optics/ lenses, with

Polycarbonate/toughened glass with company mark/name

engraved or embossed, 160 to 270 V,Power Factor more than 0.95,

THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80 certificates) Programable Motion

19 Sensor with 3 years warrantyagaist manufacturing defect :-High

Frequency DC Dimmable type sensor, having Adjustable Hold time

1Min to 20 Mins, Adjustable detection area 100% to 40%, Stand by

period 0 Sec to Infinity, Orientation Lighting 10% to 50%, Max

Mounting Height up to 15 meter and Detaction area 14-meter.Agency

has to provide a programing device to the Engineer incharge against

the total supply quantity.(A) Street Light (IP-65), Surge protection -

6KV integral and ,Light must have to sustain upto 440VAC line

supply with over-voltage protection. (old convectional fitting -7 Nos

LED Street light 120 Nos )

Energy Saving Estimate 8 /

Item Rate in Rate in

Qty. Unit Item Description Per Amount

No. Figure Words

19 Nos (A) 30Watt Dimmable LED street light Fitting 2988.59 Hundred Ea

108 Nos (B) 45Watt Dimmable LED street light Fitting 3766.29 Hundred Ea

Energy Saving Estimate 9 /

Item Rate in Rate in

Qty. Unit Item Description Per Amount

No. Figure Words

Replace old & U/S conventional motor pump by Supplying and erecting

Fully Automatic hydro pneumatic booster system with cast iron housing

Enclosure class IP44 minimum , with built in PTO motor protection and

stainless steel impeller pump, pump model Wilo WMP 3Helix V 1008 PC-

SV or GRUNDFOS Hydro multi B 3*CR 10-8 A-A-A-E-HQQE or equivalent Rupees

two pump working and one standby for support with following Seven

specifications: i) Motor data:- Power 3kw/4 HP,3 Phase motor standard Lakh(s)

IEC, motor efficiency class IE3, IP55, Insulation class F ii) Flow rate -10

CMH at 65 mtr head iii) Pump data:-stainless steel body& Impeller,Stages

& Impellers 8,Verticle Pump orientation & Maximum working pressure -16

20 1 Nos bar or 16 kg iv) GI inlet and outlet header size 50/100 mm with

717539.35 Five Ea

NRV,,Pressure switch ,pressure transmission, pressure gauge,footvalve & Hundred

other required accessories with necessary Plumbing work of suction and Thirty Nine

delivery pipe which includes all required size of pipes, Joints valves, And Paise

Bypass valve, labor all accessories required for installation of pressure Thirty Five

pump ( Foundation work and base stand cost included) along with Panel Only

HMI PLC with one VFD, Power and control contactors with necessary

Power and control switchgears, wires and cables. Control panel should be

made from Wilo, Grundfos or authorized service distributor only.

Contractor Signature

DEPUTY EXECUTIVE ENGINEER EXECUTIVE ENGINEER

J.C.ELE.SUB.DN AHMEDABAD ELECTRICAL DIVISION-1

R & B AHMEDABAD GANDHINAGAR

Energy Saving Estimate 10 /

Work Name -Replacing Existing old by Providing Energy saving luminaires, BLDC Fan ,pressure pumps, at Various

Building under Juridiction of J.C.Electrical Sub Dn Ahmedabad ( for The Purpose of Energy Saving in Government

Sr.No. Quantity Item Per Amount

1 52 Nos Cost of Old & U/S Convectional Tubelight fitting 14.60 Ea

2 1009 Nos Cost of old & U/S LED Tubelight Fitting 34.40 Ea

3 682 Nos Cost of old & U/S LED Down Light 38.90 Ea

4 7 Nos Cost of old & U/S 2*14 W T-5 Street Light 31.56 Ea

5 165 Mtr Cost of old & U/S 4*4 Sq.mm Alu Cable 8.54 Mtr

5 75 Mtr Cost of old & U/S 1.5 Sq.mm round copper Cable 13.42 Mtr

6 31 Nos Cost of old & U/S SP MCB 5.40 Ea

7 120 Nos Cost of old & U/S LED Street Light 270.60 Ea

8 5 Nos Cost of old & U/S Street Light Timer 154.70 Ea

Sr.No. Quantity Item Per Amount

9 39 Nos Cost of old & U/S pole Box 150 * 150 mm 21.45 Ea

10 3 Nos Cost of old & U/S Wall Bracket 14.85 Ea

11 650 Nos Cost of old & U/S Ceiling Fan 153.00 Ea

12 133 Mtr Cost of Old & U/S Down road 4.70 Mtr

Dy.Ex.Eng Ex.Eng

J.C.Ele.Sub Dn Ahmedabad Electrical Dn.1

R & B Ahmedabad

R & B Ahmedabad

Name of Work : Replacing Existing old by Providing Energy saving luminaires, BLDC Fan ,pressure

pumps, at Various Building under Juridiction of J.C.Electrical Sub Dn Ahmedabad ( for The Purpose of

Energy Saving in Government Building )

I / We am / are wiling to carry out the work at ____________ % Below / Above

___________(should be written in Figures and Words) the tendered amount

mentioned above,Amount of my / our tender work out as under

Put Tender Rs.- 4417815.17 Put Tender Rs.-

Less for Dismental Material Rs._____________ Less for Dismental Material Rs._____________

(A) I / We hereby declare that / We have visited the site and fully requisite my self / our selves with the local situation

regarding materials, labour and other factors pertaining to work before submitting tender.

(B) I / We hereby declare that I / We have carefully studied the condition of contract,Detailed specification and other tender

document of the work and agree to execute the same accordingly.

[1] The Rates are inclusive all taxes(Except GST),transport charges,octroi duty and storages up to date.

[2] The materials covered for wiring should be got approved from Dy.Executive Engineer in charge of the work.

[3] The materials and work shall have to be used and carried out as specification in technical naote.

[4] All works shall be carried out as per public works Department hand book and other specification of the Division of as

[5] Rate are inclusive of 1% labour cess in tender amount so 1% of total amount of bill will be deducted from the bill.

[5] Rate are inclusive of 1% labour cess in tender amount so 1% of total amount of bill will be deducted from the bill.

[6] The Agency will have to submit certificate on latter pad that Cable used in the work has been used from ISI certified cable

drum as per Note of S.E. (Elect) R.&.B. Department,Gandhinagar's No.4241,Date:-23/09/2008.

[7] Dismenatal value will not be quoted below the estimate rate.

FOR TESTING OF MATERIAL:-

[1] Material is to be used in work should be got approved by in charge E.E.

Sample of material to be used in the work is required to be tested at L.D.Engineering College of from the approved

Government Research Institute,which is must sample required to be submit as per requirement of L.D.Engineering College

or the approved Government Research Institute.In case of cable and wire 3 meters of sample and and for fluerescent fitting

5 Nos of ballast with 2 nos fluroscent lamp.may be required for testing no payment will be made on account of sample

material consideration while quoting the tender,Actual paid by agency for testing of material will be paid by the

department.Agency is requested to contact L.D.Engineering College or from the approved Government Research Institute to

understand their requirement for testing of material.

Contracor's Signature. Deputy Executive Engineer Executive Engineer

J.C Electrical Sub Division Ahmedabad Electrical Division-1

R.&.B.Department,Ahmedabad. R.&.B.Department,Ahmedabad.