Loading…
Loading…
Tender ID
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹99.9 LAdmitted-Finance | L1 | Admitted-Finance | ||
| 2 | L2₹1.0 Cr+₹2.0 L (1.95%)Admitted-Finance | L2 | Admitted-Finance | ||
| 3 | Rejected-Technical | - | Rejected-Technical Not fulfil the creteria |
Tender Value
₹95.2 L
EMD Value
₹1.9 L
Closing Date
29 Mar 2026, 5:00 pmClosed
Executive Engineer
Executive Engineer HPPWD Division Dharamshala
SH-Formation cutting, R/wall, B/wall, C.D. work, drain and Metalling and Tarring etcetera between km 0/000 to 1/500
2026_PWD_132230_1
11691-11710
Open Tender
Civil Works - Roads
Percentage
180 days
Dharamshala
Tender refer to publish
17 documents required · 17 mandatory
₹2,000
₹1.9 L
10 Jul 2026
23 Mar 2026
30 Mar 2026
23 Mar 2026
29 Mar 2026
23 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Removal of slips in hilly area in ordinary rock not requiring blasting by mechanical means including cutting and trimming of slips and disposal of cut materials within lift upto 1.50 mtrs. (One decimal fifty metres) and lead upto 1000 mtrs (One thousand metres) as per technical specification 3022.3.5 and 1611 complete, as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government. | |||||
| 2Cutting in earth work for road way in hilly areas in all heights and depths and in all kinds of soil by manual/ mechanical means, including saturated soil comprising of ordinary soil, ordinary rock, soft rock, hard rock chiseling or wedging out rock (where blasting is required ) and their intermediate classification of soil complete including setting out true to the required lines grades, cutting and trimming of side slopes, camber, super elevation and levels shown drawings and as directed by the Engineer-in Charge complete in conformity with the requirements of MORD Technical Specification section 300 and 1600 and sorting out and stacking of useful materials with in all leads and lifts in acquired road width and transporting of un-useful materials for filling in road ways, camber, embankments for grade improvements and disposal of all surplus materials to approved dumping sites through all modes of transportation including head load or animal transport or by mechanical means including leveling, fine dressing and carriage of machineries, materials, tools, equipments and safety measures and other incidentals necessary to complete the work by mechanical means and labour if required. Recovery of stones to the tune of 47.00 cubic metres quantity at the rate of Rs. 300/- only (Rupees three hundred only) per cubic metres shall be effected from the contractor running bills on pro-rata basis as per actual quantity executed. Any loss to the public/private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be compensated by him in all cases and as per the entire satisfaction and directions of Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax,GST or any other taxes imposed by the Government. | |||||
| 3Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drains and foundation of all other structures, graded and compacted to meet requirement, including setting out, true to the lines, grades, width and side slopes in accordance with drawings, including spreading the embankment material with motor –Grader in successive layers of 200mm (two hundred millimeter) uniform thickness, and compacting with vibratory roller 8-10 (eight to ten) Tonne static weight to meet the requirements of table 300.1 & 300.2 as per MORD technical specification section 300,1600 and as per the entire satisfaction and directions of Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax,GST or any other taxes imposed by the Government. | |||||
| 4Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drains and parapets etcetera in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock chiseling /wedging out rocks (Where blasting is prohibited) as per drawings and M.O.R.D. technical specification section 300 and 1600 and as per direction of the Engineer- In – Charge including setting out, shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto any lead and lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm ( one hundred fifty milimetre) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water) upto any depth and any quantam of water including cleaning of slush which may arrise out during dewatering as per entire satisfaction and directions of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax,GST or any other taxes imposed by the Government. | |||||
| 5Providing and laying mechanically mixed and vibrated concrete for plain cement concrete nominal mix 1:4:8 (One cement isto four sand isto eight graded crushed stone aggregate 40mm (Forty millimeter) nominal size), on ground or under water for all type of structure, in R/wall / B/wall and the like etcetera complete including pumping or bailing out water, dewatering (surface/sub soil water)including removal of slush which may arise at time of laying concrete for all heights/depths including cost of form work and curing complete for 14 (fourteen) days as per drawing and MORD Technical specification section 800, 900, 1200 and 1600 as per entire satisfaction and directions of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax,GST or any other taxes imposed by the Government. | |||||
| 6Providing and laying 100mm (One Hundred millimeter) dia PVC pipe Weep Holes in brick masonry/plain /reinforced concrete abutments, wing wall/ return wall, retaining walls and breast walls, extending through the full width of the structure with slope of IV:20H ( One vertical : twenty Horizontal) towards draining face complete as per drawing and MORD technical specification section 700 and 1200 and as per the directions and entire satisfactions of Engineer-in-Charge, including carriage of materials with in all leads, lifts and other incidentals. The rates is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government. | |||||
| 7Back filling behind abutment, wing wall and return wall complete as per drawing & Technical Specification Clause-1204.3.8 Granular material and as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government. | |||||
| 8Providing concrete for plain cement concrete in open foundations complete as per drawings and MORD technical specifications section 800, 900 , 1200 Nominal mix (1:3:6) (One cement isto Three sand isto Six graded crushed stone aggregate 20mm (two milimetre) nominal mix in abutments on ground or under water including curing complete, pumping or bailing out water, dewatering removal of slush required at site which may arrise at the time of laying concrete complete for all heights and depths including the cost of form work and as per entire satisfaction and directions of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax,GST or any other taxes imposed by the Government | |||||
| 9Providing and laying mechanically mixed and vibrated concrete for plain cement concrete in substructure / grade M-15 (M-Fifteen) design mix with cement contents not less than 275 kg/cum ( two hundred seventy five kilogram per cubic metre all heights/ depths including the cost of form work complete in toe wall etcetra as per drawings and MORD technical specification section 800, 900 and 1200 , as per entire satisfaction and directions of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | |||||
| 10Laying of 900mm ( nine hundred milimetre) diametre ISI marked heavy duty none pressure pipe is class NP2 reinforced cement concrete pipe NP2 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 ( one cement isto two sand) but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets etcetra, as per drawing and M.O.R.D. technical specifications section 1100 and as per entire satisfaction and directions of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government. (Note:- NP2 and Ring Shall be provided by the Department) | |||||
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
cancelled_1.PDF
pdf • 0.05 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.10 MB
BOQ_195534.xls
BOQ • 0.35 MB
3.pdf
Tender Documents • 4.11 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .