REPAIR, REWINDING, SERVICING OF ELECTRIC MOTORS/ PUMPS / REPAIR/ REPLACEMENT OF ELECTRIC PANEL AND ALLIED WORKS OF WATER SUPPLY INSTALLATION AT AFS JODHPUR UNDER AGE E/M, GE(AF) NO 2 JODHPUR

Amount

M&L for taking out of Elect Motor 75 HP Capacity installed as motor from foundation after disconnecting electrical connections, dismantling motor and rewiding the same with super enamelled copper winding wire of existing gauge including varnishing, baking, cotton tape and greasing of bearings, bushes and other connected parts, reassembling and fixing the same in its original position including replacement of unserviceable nut-bolts, washer, lugs, terminal plate and making proper electrical connection complete all as specified and directed by Engineer-in-charge. Make of winding wire : - Devidayal / Chetak Note : - (i) Bearing if required for replacement shall be paid seprately (ii) Transportation of motor is included in the unit rate of items nothing extra shall be paid on this account

All as per serial item No. 1 here-in-above but motor of capacity 50 HP

All as per serial item No. 1 here-in-above but motor of capacity 30 HP

All as per serial item No. 1 here-in-above but motor of capacity 20 HP

All as per serial item No. 1 here-in-above but motor of capacity 10/12.5 HP

All as per serial item No. 1 here-in-above but motor of capacity 7.5 HP

All as per serial item No. 1 here-in-above but motor of capacity 5 HP

All as per serial item No. 1 here-in-above but motor of capacity 3/2 HP

Taking out centrifugal motor of any capacity from foundation, dismantling the motor, taking out rotor and filling the material by welding work, finishing by lathe machine, replacement of unserviceable bearing, reassembling the motor and fixed in its original position complete all as specified and directed by Engineer-in-charge. Note: - (i) Bearing shall be measured and paid for separately as “Supply only” (ii) New Nuts, bolts and washers if required for refixing the motor shall be provided by the contractor, nothing extra shall be paid on this account.

Supply only Ball Bearing of suitable size for rotor of motor 75 HP installed complete all as specified and directed by Engineer-in-charge. Make:-NBC / SKF / Tata.

All as per serial item No 10 here-in-above but for motor of 50 HP.

All as per serial item No 10 here-in-above but for motor of 30 HP.

All as per serial item No 10 here-in-above but for motor of 20 HP.

All as per serial item No 10 here-in-above but for motor of 10 /12.5 HP.

All as per serial item No 10 here-in-above but for motor of 7.5 HP.

All as per serial item No 10 here-in-above but for motor of 5 HP.

All as per serial item No 10 here-in-above but for motor of 3/ 2 HP.

Taking out defective centrifugal pump set , assembled with 75 HP elelctric motor, dismantling the pump set for carrying out repair / replacement of unserviceable parts such as CI impeller, Bush, ball bearing etc. reassembling, installing, commissioning and testing complete all as specified and directed by Engineer-in-charge. Note :(i) CI impeller, Bush & ball bearing required to replace shall be measured and paid for separately under respective items of BOQ as “Supply only”. (ii) The cost of transportation is included in the unit rate of this item nothing extra shall be paid on this account.

All as per serial item No 18 here-in-above but pump set assembled with 50 HP elelctric motor

All as per serial item No 18 here-in-above but pump set assembled with 20 HP elelctric motor

All as per serial item No 18 here-in-above but pump set assembled with 10 /12.5 HP elelctric motor

All as per serial item No 18 here-in-above but pump set assembled with 7.5 HP elelctric motor

All as per serial item No 18 here-in-above but pump set assembled with 5 HP elelctric motor

All as per serial item No 18 here-in-above but pump set assembled with 2 /3 HP elelctric motor

Supply only ball bearing suitable for centrifugal Pump set assembled with 75 HP motor complete all as specified and directed by Engineer-in-charge. Make : NBC / SKF / TATA

All as per serial item No 25 here-in-above but assembled with 50 HP Motor

All as per serial item No 25 here-in-above but assembled with 20 HP Motor

All as per serial item No 25 here-in-above but assembled with 10 /12.5 HP Motor

All as per serial item No 25 here-in-above but assembled with 7 .5 HP Motor

All as per serial item No 25 here-in-above but assembled with 5 HP Motor

All as per serial item No 25 here-in-above but assembled with 2/ 3 HP Motor

Supply only CI impeller suitable for pump set assembled with 75 HP motor complete all as specified and directed by Engineer-in-charge. Make : Kirloskar

All as per serial item No 32 here-in-above but assembled with 50 HP Motor

All as per serial item No 32 here-in-above but assembled with 20 HP Motor

All as per serial item No 32 here-in-above but assembled with 10/12.5 HP Motor

All as per serial item No 32 here-in-above but assembled with 7.5 HP Motor

All as per serial item No 32 here-in-above but assembled with 5 HP Motor

Supply only stainless steel Bush suitable for pump set assembled with 75 HP motor complete all as specified and directed by Engineer-in-charge.

All as per serial item No 38 here-in-above but assembled with 50 HP Motor

All as per serial item No 38 here-in-above but assembled with 20 HP Motor

All as per serial item No 38 here-in-above but assembled with 10 / 12.5 HP Motor

All as per serial item No 38 here-in-above but assembled with 7.5 HP Motor

All as per serial item No 38 here-in-above but assembled with 5 HP Motor

Supplying, laying & jointing in replacement submersible cable flat type, copper conductor of size 16 Sqmm 3 core complete all as specified & as directed by Engineer –in-charge.

All as per serial item No.44 here-in-above but 10 Sqmm 3 core.

All as per serial item No.44 here-in-above but 6 Sqmm 3 core.

All as per serial item No. 44 here-in-above but 4 Sqmm 3 core.

S&F as in replacement coupling assembly as per existing model & make suitable for centrifugal pump set assembled with 75 HP motor complete all as specified & as directed by Engineer –in-charge.

All as per serial item No. 48 here-in-above but assembled with 50 HP motor

All as per serial item No. 48 here-in-above but assembled with 20 HP motor

S&F in replacement rubber coupling as per existing model & make suitable for centrifugal pump set assembled with 75 HP motor complete all as specified & as directed by Engineer –in-charge.

All as per serial item No. 51 here-in-above but assembled with 50HP motor

All as per serial item No. 51 here-in-above but assembled with 20/30HP motor

All as per serial item No. 51 here-in-above but assembled with 10/7.5 HP motor

All as per serial item No. 51 here-in-above but assembled with 5 HP motor

S&F in replacement bakelite sheet of connection plate with cable connector suitable for 75 / 50 HP motor complete all as specified & as directed by Engineer –in-charge.

All as per serial item No. 56 here-in-above but suitable for 20 / 12.5 /10 HP motor

S&F in replacement cooling fan with locking aluminum cast type screw, as per existing type, suitable for 75 / 50 HP motor complete all as specified & as directed by Engineer –in-charge.

All as per serial item No. 58 here-in-above but suitable for 25 / 20 / 12.5 HP motor

All as per serial item No. 58 here-in-above but suitable for 10 / 7.5 HP motor

All as per serial item No. 58 here-in-above but suitable for 5 HP motor

S&F gland rope of size 10 sqmm or as required complete all as specified & as directed by Engineer –in-charge

M&L for taking out defictive submersible pump set of capacity 5 / 7.5 HP Capacity from bore well after disconnecting electrical connections, transportation to workshop for repair, dismantling the pump set for detection of repair such as rewinding of motor, replacement of iron stainer, bronze impeller, gun metal bushes stainless steel sleeve, impeller key, thrust bearing, replacement of unserviceable nut-bolts, washer, lugs, terminal plate, reassembling, lowering in well in its original position, making proper electrical connections, commissioning & testing complete all as specified and directed by Engineer-in-charge. Note : - (i) Cost for transportaion to workshop and carry back to site after repair is inlcuded in the unit rate of item nothing extra shall be paid on this acount. (ii) Rewinding of submersible motor, Iron stainer, bronze impeller, gun metal bushes stainless steel sleeve, impeller key and thrust bearing if required for replacement shall be paid separetly against respective items of BOQ as "Supply only". (iii) Lathe work and grinding of shaft if required shall be paid separately against respective items of BOQ. (iv) Cost of new nuts, bolts, washers, lugs and terminal plate required to be replaced is included in the unit rate of this item nothing extra shall be paid on this account.

All as per serial item No. 63 here-in-above but submersible pump set of capacity 10 / 12.5 HP

M&L for rewiding of submersible pump set of capacity 5 / 7.5 HP with PVC insulated copper winding wire of existing gauge including varnishing, baking, cotton tape and greasing of bearings, bushes and other connected parts complete all as specified and as directed by Engineer –in-charge Make of winding wire : - Devidayal / Chetak

All as per serial item No. 65 here-in-above but submersible pump set of capacity 10 / 12.5 HP

Supply only Iron stainer suitable for submersible pump of capacity 5 /7.5 HP, 6 stage complete all as specified and as directed by Engineer –in-charge.

Supply only Iron stainer suitable for submersible pump of capacity 10/ 12.5 HP, 6 stage complete all as specified and as directed by Engineer –in-charge.

Supply only Bronze impeller suitable for submersible pump of capacity 5 / 7.5 HP, 6 stage complete all as specified and as directed by Engineer –in-charge.

Supply only Bronze impeller suitable for submersible pump of capacity 10 / 12.5 HP, 6 stage complete all as specified and as directed by Engineer –in-charge.

Supply only Gun metal Bush suitable for submersible pump of capacity 5 / 7.5 HP, 6 stage complete all as specified and as directed by Engineer –in-charge.

Supply only Gun metal Bush suitable for submersible pump of capacity 10 /12.5 HP, 6 stage complete all as specified and as directed by Engineer –in-charge.

Supply only Stainless steel sleeves suitable for submersible pump of capacity 5 /7.5 HP, 6 stage complete all as specified and as directed by Engineer –in-charge.

Supply only Stainless steel sleeves suitable for submersible pump of capacity 10 /12.5 HP, 6 stage complete all as specified and as directed by Engineer –in-charge.

Supply only Impeller Key suitable for submersible pump of capacity 5/ 7.5 HP, 6 stage complete all as specified and as directed by Engineer –in-charge.

Supply only Impeller Key suitable for submersible pump of capacity 10 / 12.5 HP, 6 stage complete all as specified and as directed by Engineer –in-charge.

Supply only Thrust bearing (Gun metal) suitable for submersible pump of capacity 5 /7.5 HP, 6 stage complete all as specified and as directed by Engineer –in-charge.

Supply only Thrust bearing (Gun metal) suitable for submersible pump of capacity 10 / 12.5 HP, 6 stage complete all as specified and as directed by Engineer –in-charge.

Grinding shaft of submersible pump of capacity 5 / 7.5 HP, 6 stage with gridnding machine complete all as specified and as directed by Engineer –in-charge.

Grinding shaft of submersible pump of capacity 10 / 12.5 HP, 6 stage with gridnding machine complete all as specified and as directed by Engineer –in-charge.

S&F in replacement contactor ML-2, 3 phase 415 volts having auxillary contracts 2 NO + 2 NC suitable for coil voltage 110 V, 220, 240 & 415 volts, 50 Hz of AC3 Rating 70 Amps and AC1 Rating 110 Amps complete all as specified and as directed by Engineer –in-charge. Make : L&T (type ML 2) Cat Part No SS90701 or equivalent of Siemens / English Electric / ABB / Legrand.

S&F in replacement contactor ML-3, 3 phase 415 volts having auxillary contracts 2 NO + 2 NC suitable for coil voltage 110 V, 220, 240 & 415 volts, 50 Hz of AC3 Rating 70 Amps and AC1 Rating 110 Amps complete all as specified and as directed by Engineer –in-charge. Make : L&T (type ML 3) Cat Part No SS90721 or equivalent of Siemens / English Electric / ABB / Legrand.

S&F in replacement contactor ML-4, 3 phase 415 volts having auxillary contracts 2 NO + 2 NC suitable for coil voltage 110 V, 220, 240 & 415 volts, 50 Hz of AC3 Rating 70 Amps and AC1 Rating 110 Amps complete all as specified and as directed by Engineer –in-charge. Make : L&T (type ML 3) Cat Part No SS90910 or equivalent of Siemens / English Electric / ABB / Legrand.

S&F in replacement contactor ML-6, 3 phase 415 volts having auxillary contracts 2 NO + 2 NC suitable for coil voltage 110 V, 220, 240 & 415 volts, 50 Hz of AC3 Rating 110 Amps and AC1 Rating 125 Amps complete all as specified and as directed by Engineer –in-charge. Make : L&T (type ML 3) Cat Part No SS90921 or equivalent of Siemens / English Electric / ABB / Legrand.

S&F in replacement Digital type Voltmeter 96mm x 96mm, of range 0-500 volts, class -1, incl internal wiring with 1.0 sqmm single core PVC wire etc complete all as specified & as directed by Engineer-in-charge

S&F in replacement Digital type Ammeter 96mm x 96 mm, single phase,as suitable range, class -1, incl internal wiring with 1.0 sqmm single core PVC wire etc complete all as specified & as directed by Engineer-in-charge

S&F in replacement oveload relay, suitable for 10 HP to 40 HP motor, 3 phase, 415 volt, 50 Hz as per sample complete all as specified and as directed by Engineer –in-charge.

S&F in replacement oveload relay, suitable for 50HP to 75 HP , motor 3, phase 415 volt, 50 Hz as per sample complete all as specified and as directed by Engineer –in-charge.

S&F in replacement fully automatic star delta starter type ML1.5 FASD having relay of range 13 - 21 Amp including making electrical connection complete all as specified & as directed by Engineer-in-charge Make :- L&T Cat Part No SS91855 or equivalent Crompton Greaves / ABB / Schneider / Seimens

S&F in replacement fully automatic star delta starter type ML2 FASD having relay of range 20 - 32 Amp including making electrical connection complete all as specified & as directed by Engineer-in-charge Make :- L&T Cat Part No SS90705 or equivalent Crompton Greaves / ABB / Schneider / Seimens

S&F in replacement fully automatic star delta starter type ML3 FASD having relay of range 28 - 42 Amp including making electrical connection complete all as specified & as directed by Engineer-in-charge Make :- L&T Cat Part No SS90730 or equivalent Crompton Greaves / ABB / Schneider / Seimens

S&F in replacement MK1 DOL starter range 13 - 22 Amp including making electrical connection complete all as specified & as directed by Engineer-in-charge Make :- L&T Cat Part NoSS96228 or equivalent Crompton Greaves / ABB / Schneider / Seimens

S&F in replacement MU - G10 H DOL Starter range 28 - 42 Amp including making electrical connection complete all as specified & as directed by Engineer-in-charge Make :- L&T Cat Part NoSS96228 or equivalent Crompton Greaves / ABB / Schneider / Seimens

S&F in replacement single phase preventer type SDz5, SPPR + Timer, 415 V including necessary copper connection, lugs etc complete all as specified & as directed by Engineer-in-charge Make :- L&T Cat Part No XM818090000 or equivalent in ABB

S&F in replacement electronic timer type ET100, 110 / 240V, 50 HZ including necessary electric connection complete all as specified & as directed by Engineer-in-charge Make :- L&T Cat Part No SE 92003 or equivalent in ABB

S&F in replacement on / off switch (push button) complete all as specified & as directed by Engineer-in-charge

S&F in replacement indicating lamp with holder and cover as per existing complete all as specified & as directed by Engineer-in-charge

S&F in replacement of slip ring drum suitable for 2 HP to 5 HP motor of floculator as per sample complete all as specified & as directed by Engineer-in-charge

S&F in replacement of carbon bush suitable for 2 HP to 5 HP motor of floculator as per sample complete all as specified & as directed by Engineer-in-charge

S&F in replacement MCCB 4 Pole 100 Amps, thermal magnetic release having, breaking capacity 25 KA, 415 Volt in the existing feeder pillar box including any addition / alteration to the panel to accommodate the new MCCB & making connections with 25x3 mm copper strip as required from main bus bars, making necessary welding work, metal work for fixing base plate etc and connections complete all as specified and as directed by Engineer-in-Charge. Make : Legrand Cat Part No. DPX 160 420055 or equivalent in L&T / Schneider / Standard

All as per item No. 101 here-in-before but MCCB 4 Pole, 125 Amps rating, breaking capacity 25 KA, 415 Volt Make : Legrand Cat Part No. DPX 160 420056 or equivalent in L&T / Schneider / Indoasian

All as per item No. 101 here-in-before but MCCB 4 Pole, 160 Amps rating, breaking capacity 25 KA, 415 Volt Make : Legrand Cat Part No. DPX 160 420057 or equivalent in L&T / Schneider / Indoasian

All as per item No. 101 here-in-before but MCCB 4 Pole, 250 Amps rating, breaking capacity 36 KA, 415 Volt Make : Legrand Cat Part No. DPX 250 420249 or equivalent in L&T / Schneider / Indoasian

All as per item No. 101 here-in-before but MCCB 4 Pole, 400 Amps rating, breaking capacity 36 KA, 415 Volt Make : Legrand Cat Part No. DPX 630 422007 or equivalent in L&T / Schneider / Indoasian

S&F in replacement Chaneover switch 630 Amps, making necessary work, metal work for fixing etc and connections complete all as specified and as directed by Engineer-in-Charge.

Supply & fixing as in repair cast iron body Foot valve of size 80mm bore\ ISI marked with IS 4038 with flanged ends and drilled, with neoprene rubber gasket joint and nuts bolts (high tensile) washers etc complete including testing all as specified.

Supply & fixing as in repair cast iron body Foot valve of size 100mm bore\ ISI marked with IS 4038 with flanged ends and drilled, with neoprene rubber gasket joint and nuts bolts (high tensile) washers etc complete including testing all as specified.

Supply & fixing as in repair cast iron body Foot valve of size 150mm bore ISI marked with IS 4038 with flanged ends and drilled, with neoprene rubber gasket joint and nuts bolts (high tensile) washers etc complete including testing all as specified.

Supply and fixing as in repair non return valves of size 80mm bore, cast iron body, as per IS 5312, heavy duty, both ends flanged and drilled, including nuts, bolts, washer and neoprene rubber gasket joint complete all as specified and as directed.

Supply and fixing as in repair non return valves of size 100mm bore, cast iron body, as per IS 5312, heavy duty, both ends flanged and drilled, including nuts, bolts, washer and neoprene rubber gasket joint complete all as specified and as directed.

Supply and fixing as in repair non return valves of size 150mm bore, cast iron body, as per IS 5312, heavy duty, both ends flanged and drilled, including nuts, bolts, washer and neoprene rubber gasket joint complete all as specified and as directed.

Supply & fixing as in repair cast iron sluice valve Long body of 80 mm bore, ISI marked with IS 14846 – 2000 with flanged ends and drilled, stainless steel spindle, CI gate with brass ring and iron wheel handle, cast iron cap, complete with neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, complete including testing all as specified.

Supply & fixing as in repair cast iron sluice valve Long body of 150 mm bore, ISI marked with IS 14846 – 2000 with flanged ends and drilled, stainless steel spindle, CI gate with brass ring and iron wheel handle, cast iron cap, complete with neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, complete including testing all as specified.

Supply & fixing as in repair cast iron sluice valve Long body of 200 mm bore, ISI marked with IS 14846 – 2000 with flanged ends and drilled, stainless steel spindle, CI gate with brass ring and iron wheel handle, cast iron cap, complete with neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, complete including testing all as specified.

Preparation of old painted steel surfaces of panel body of any size incl scrapping old paint, denting and applying two coats of spray paint using synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge.

M&L for complete removal of existing paint of Elect motor with pump including base frame and applying two coats of spray paint using synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge.

S&F in repair fan belt B-32 of air compressor.The fan belt B-32 shall be ISI marked best quality and shall be approved by GE before incorporation in the work complete all as specified and directed by Engineer-in-charge. Make : - Fenner / Dunlop

Supply and filling compressor oil CG 100 complete all as specified and directed by Engineer-in-charge.

Supply and laying in repair rubber mat of size 2 m x 1 m x 19mm thick complete all as specified and directed by Engineer-in-charge.

Supply and fix water pressure gauge of pressure range 0-10 kg/Sqcm complete all as specified and directed by Engineer-in-charge.

Supply and fix water pressure gauge of pressure range 0-15 kg/Sqcm complete all as specified and directed by Engineer-in-charge.

S&F Building security light fittings,with pressure die cast alumunium housing,suitable for 90 W LED,complete pre wired,incl suitable bracket for fixing light on wall or any indicated location all as specified and as directed.

Supplying and fixing /connecting for service connection/garden light connection, 1100 volts grade heavy duty cable PVC insulated alumunium multy straded conductor,twin core cable circular of sizes 6 sqmm 2 core completeall as specified and directed by Engineer-in-charge.

Disconnecting and opening of pressure type water filter cylinder cap 90m3/hr and removal of existibg filter media and depositing not exceeding 50 mtr,complete including scrapping /cleaning of surface in side of filter removing mould,mass foreign materials scale and dirt etc and refiling filter media all as specified and directed.

M&L for two coats of black bituminus paint lead free in side the water filter suitable for drinking water including preparation of surface of filter all as specified and directed by Engineer-in-charge.

M&L for two coats of synthetic enamel paint after preparation of surface of external side of pressure filter all as specified and directed by Engineer-in-charge.

Supply and laying of uniform grading all as specified (sand in dry condition shall be spread in level ground and 10% of total volume of sand shall be deducted for voids) of size 1.0 to 0.50 mm.

Supply only gravel (single) size 6mm to 3mm of size all as specified and directed by Engineer-in-charge.

Supply only gravel (single) size 15mm to 6mm of size all as specified and directed by Engineer-in-charge.

Supply only gravel (single) size 25mm to 15mm of size all as specified and directed by Engineer-in-charge.

Supply only gravel (single) size 40mm to 25mm of size all as specified and directed by Engineer-in-charge.

Supply only fine sand all as specified and directed by Engineer-in-charge.

Rajendra Engineering Works

M/S SUMAN ENTERPRISES

Siddharth Constructions