DEMOLITION AND RECONSTRUCTION OF GAREGES IN MT SECTION PHASE I

Amount

NOTE: Schedule ‘A’ Part I to VI are under Ser No. 2.00 to 7.00. are Prepriced by MES. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.

Lump sum price worked out for Building / Structures as listed in Sch `A’ Part I.

Lump sum price worked out for Excavation / Earthwork & Site Clearance as listed in Sch `A’ Part II

Lump sum price worked out for Demolition of Building as listed in Sch `A’ Part III

Lump sum price worked out for Additional B/R Items as listed in Sch `A’ Part IV

Lump sum price worked out for Internal Electrification as listed in Sch `A’ Part V

Lump sum price worked out for External Electric Supply as listed in Sch `A’ Part VI

Lump sum price worked out for Internal Plumbing And Sanitary as listed in Sch `A’ Part VII

SCHEDULE 'A' PART - VIII Misc Items is not prepriced by MES and prepriced rates indicates 0.0 under column 5 signified this fact only. Bidder shall insert their rates in Green filed under Col-6.

S&F PVC (SWR) pipes 160mm bore single socketed in any length with rubber ring joints fixed to walls

S&F PVC (SWR) bends any radius 160mm dia

M&L for provision of RCC static water tank of capacity 50000 Ltr as per Drg No CEAG/STD/STR/17/15 Sheet No 1/1 Dated 30.09.2015 complete all as specified and directed.

Taking down MCB DB with MCB any type and any capacity all as specified and directed by Engineer-in-Charge.

Taking down Sub main wiring any type any size all as specified and directed by Engineer-in-Charge.

Taking down unserviceable tube lights all as specified and directed by Engineer-in-Charge.

Supply & fix Air Circulator fans 230 volts single phase oscillating 450 mm sweep suitable for wall mounting all as specified and directed by Engineer-in-Charge

Supply & fix Air Circulator fans metallic body 230 volts single phase oscillating750 mm sweep suitable for wall mounting all as specified and directed by Engineer-in-Charge.

Supply and fixing LED tube lights fitting 1X20W, 04 feet, IP 20 protection, wall mounted type, slim LED batten, necessary mounting arrangements on PVC square box 02 Nos, provn of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white colour flexible pipe complete all as specified & directed by the Engineer-in-Charge.

Dismantling and refixing of light fittings , any make and any watts with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size.

S & F GI pipe bracket, made out of 40mm dia light grade GI pipe, fabricated into shape and size as required, not less than 1.2 metre long complete with 02 nos MS flate iron 40X6mm with bolts, nuts and washer complete all fixed on pole/ walls as directed by Engineer-in-Charge.

Dismantling LT Panel any make any size and taking out by properly disconnecting all electrical connections and taking suitable saftely measure

Dismantling LT PCC pole and taking out by properly disconnecting all electrical connections and taking suitable saftely measure

Dismantling and taking down over head conductor any type/size from LT pole and taking out by properly disconnecting all electrical connections and taking suitable saftely measure

Dismantling and taking down insulators any type and any make from LT pole by properly disconnecting all electrical connections and taking suitable saftely measure

Dismantling and taking out LT cable any type any size all as specified and directed by Engineer-in-Charge.

Supply, installation, commissioning and testing LT panel board of suitable shape and size for 3 phase, 4 wire,415 Voltss AC, 50 Hz supply, outdoor cubical type, dust and vermin proof, pedestal mounting type suitable for outdoor applications having suitable shape, size canopy on top, made out of 3.15 mm thick MS sheet with using 40mmX40mmX5mm angle iron frame and supports, duly finshed with powder cated using two coats of synthetic enamel paint of approved colour over a coat of red oxide primer all over steel surfaces complete with separate compartment of suitable shape and size with shutter and locking arrangement for each switchgear and including PCC work for fixing panel legs and copper bus bar 3 phase rating of 250 Amps conforming of following:- (i) Incomming :- (a) MCCB , 4 P, 200 Amp,25 KA thermal magnetic release type-01 No (b) Digital voltmeter (0-500 V)-01 No. (c) Ampear meter (0-500 V), with CT -01 No. (ii) Outgoing :- (a) MCCB 4 P, 125 Amp, 16 KA thermal magnetic release type-03 Nos (b) MCB SPN,32 Amp-04 Nos

Material & labour for Tibba sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection complete all as specified and directed by Engineer-in-Charge.

Material & labour for stone slab 40mm to 50mm thick rough dressed Jodhpur stone patties/ slab cover in trenches for protection of cable 25 cm to 30 cm wide and not less than 50cms in length laid dry abutting each other with gap between adjacent slab not exceeding 10mm over sand cushioning complete all as specified and directed by the Engineer-in-Charge.

New Vishvakarma Udhyog