Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42,911Admitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹43,270+₹359 (0.84%)Admitted-Finance | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | M/S Sunrise Traders L2 | M/S M.K ENGINEERING WORKS L1 |
|---|---|---|---|---|---|
| 1.00 | Dismantling of damaged Goulds Model 3756 frame mounted single stage end suction Centrifugal pump from cabin of Dredger with the help of skilled labours, Chain pulley block, other tools & tackles, then shifting it to river bank in private boat and loading in private vehicle to workshop for repairs. | 1 | job | 1,290 ₹1,290 | 1,285 ₹1,285 Lowest |
| 2.00 | Extraction of old damaged bearings (outboard & inboard) using bearing pullers, other tools & tackles. Repairs to worn out bearing seats by way of patching, remetalling, turning, finishing, balancing on lathe to accommodate new bearings. | 1 | job | 600 ₹600 | 595 ₹595 Lowest |
| 3.00 | Providing and fitting of Deep Groove Ball Bearing 6309 of SKF/ FAG/ NTN/ equivalent in outboard bearing seat. | 1 | no | 1,600 ₹1,600 | 1,595 ₹1,595 Lowest |
| 4.00 | Providing and fitting of Tapper Roller Bearing 30210 of SKF/ FAG/ NTN/ equivalent in the inboard bearing seat. | 1 | no | 885 ₹885 | 884 ₹884 Lowest |
| 5.00 | Manufacturing, providing, fitting of steel impeller key for pump shaft as per sample. The job shall also include turning of shaft on lathe machine to remove minor eccentricity and male rethreading of worn out threads to accommodate the newly fabricated lock nut. | 1 | job | 1,425 ₹1,425 | 1,420 ₹1,420 Lowest |
| 6.00 | Repairs to damaged bronze impeller by way of fabrication of new collar of impeller using brazing and finishing on lathe machine to restore the original shape and profile. Repairs to vanes of impeller using brazing with proper patching, finishing. The job also includes fabrication, providing and fitting of bronze/ GM seal housing wearing ring (01 no), casing wearing ring (01 no) as per sample, SS shaft sleeve (01 no.), impeller washer, Gland stud (02 no), Gland nut (02 no), casing O- ring. Providing and fitting of mechanical seal (01 no.) as per sample for the completion of work. | 1 | job | 12,630 ₹12,630 | 12,620 ₹12,620 Lowest |
| 7.00 | Replacement of damaged pulley of CI with new one of size 50-SPZ (02-groove) along with Rubber belts as per sample to service pump. | 1 | job | 3,500 ₹3,500 | 3,480 ₹3,480 Lowest |
| 8.00 | Loading/ shifting of the repaired pump in private load carrier & boat from workshop to dredger, then refitting of the same and testing on full load. | 1 | job | 1,490 ₹1,490 | 1,480 ₹1,480 Lowest |
| 9.00 | Providing and fitting of Graphite packing as per sample for Dredger pump to utilize its service during operation period. | 4 | kgs | 800 ₹3,200 | 788 ₹3,152 Lowest |
| 10.00 | Fabrication, providing, fitting of collared M.S Circular lid for fuel tanks of Budshah-II Dredger. The lid shall be fabricated out of 06mm thick sheet with 06 inch height collar with hinges, nuts, bolts, etc. on existing oil filler neck. Welding shall be carried out using superior quality welding electrodes, etc. as per requirement of the job. Cleaning of fabricated structure by way of scrapping, chipping, rubbing and preparing the surface to receive primer properly. The job then involves applying two coats of epoxy primer and two coats of epoxy marine quality enamel paint of specified colour as per the direction of site Engineer. All tools & tackles, transportation, boat, DG set etc shall be arranged by firm for execution of work. | 2 | job | 5,500 ₹11,000 | 5,400 ₹10,800 Lowest |
Tender Value
₹43,460
EMD Value
₹1,300
Closing Date
10 Mar 2026, 6:00 pmClosed
Executive Engineer FMD Baramulla
Khawaja Bagh Baramulla
Refer to tender document and BOQ
2026_IFC_305186_1
NIT 54 of 2025-26
Open Tender
Machineries/ Mechanical Engg Items
Item Rate
10 days
Tulibal sopore and Hajin Bandipora
refer Tender document
2 documents required · 2 mandatory
₹0
₹1,300
12 Mar 2026
4 Mar 2026
11 Mar 2026
4 Mar 2026
10 Mar 2026
4 Mar 2026
Dismantling of damaged Goulds Model 3756 frame mounted single stage end suction Centrifugal pump from cabin of Dredger with the help of skilled labours, Chain pulley block, other tools & tackles, then shifting it to river bank in private boat and loading in private vehicle to workshop for repairs.
Extraction of old damaged bearings (outboard & inboard) using bearing pullers, other tools & tackles. Repairs to worn out bearing seats by way of patching, remetalling, turning, finishing, balancing on lathe to accommodate new bearings.
Providing and fitting of Deep Groove Ball Bearing 6309 of SKF/ FAG/ NTN/ equivalent in outboard bearing seat.
Providing and fitting of Tapper Roller Bearing 30210 of SKF/ FAG/ NTN/ equivalent in the inboard bearing seat.
Manufacturing, providing, fitting of steel impeller key for pump shaft as per sample. The job shall also include turning of shaft on lathe machine to remove minor eccentricity and male rethreading of worn out threads to accommodate the newly fabricated lock nut.
Repairs to damaged bronze impeller by way of fabrication of new collar of impeller using brazing and finishing on lathe machine to restore the original shape and profile. Repairs to vanes of impeller using brazing with proper patching, finishing. The job also includes fabrication, providing and fitting of bronze/ GM seal housing wearing ring (01 no), casing wearing ring (01 no) as per sample, SS shaft sleeve (01 no.), impeller washer, Gland stud (02 no), Gland nut (02 no), casing O- ring. Providing and fitting of mechanical seal (01 no.) as per sample for the completion of work.
Replacement of damaged pulley of CI with new one of size 50-SPZ (02-groove) along with Rubber belts as per sample to service pump.
Loading/ shifting of the repaired pump in private load carrier & boat from workshop to dredger, then refitting of the same and testing on full load.
Providing and fitting of Graphite packing as per sample for Dredger pump to utilize its service during operation period.
Fabrication, providing, fitting of collared M.S Circular lid for fuel tanks of Budshah-II Dredger. The lid shall be fabricated out of 06mm thick sheet with 06 inch height collar with hinges, nuts, bolts, etc. on existing oil filler neck. Welding shall be carried out using superior quality welding electrodes, etc. as per requirement of the job. Cleaning of fabricated structure by way of scrapping, chipping, rubbing and preparing the surface to receive primer properly. The job then involves applying two coats of epoxy primer and two coats of epoxy marine quality enamel paint of specified colour as per the direction of site Engineer. All tools & tackles, transportation, boat, DG set etc shall be arranged by firm for execution of work.
Fabrication, providing, fitting of collared M.S Circular lid for fuel tanks of Soya-II Dredger deputed at Hajin Bandipora. The lid shall be fabricated out of 06mm thick sheet with 06 inch height collar with hinges, nuts, bolts, etc. on existing oil filler neck. Welding shall be carried out using superior quality welding electrodes, etc. as per requirement of the job. Cleaning of fabricated structure by way of scrapping, chipping, rubbing and preparing the surface to receive primer properly. The job then involves applying two coats of epoxy primer and two coats of epoxy marine quality enamel paint of specified colour as per the direction of site Engineer. All tools & tackles, transportation, boat, DG set etc shall be arranged by firm for execution of work.
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.49 MB
BOQ_991209.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .