Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.1 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹4.4 L+₹30,711.30 (7.57%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹4.5 L+₹44,442.80 (10.9%)Rejected-AOC | L3 | Rejected-AOC L3 | |
| 4 | L4₹4.7 L+₹65,363.52 (16.1%)Rejected-AOC | L4 | Rejected-AOC L4 |
| Sl No | Description | Qty | Unit | Vishnujith.R L3 | M Chandrasekharan Unnithan L2 | Anup S Nair L1 | JINUMOL A K L4 |
|---|---|---|---|---|---|---|---|
| 1.00Roof Truss work | |||||||
| 1.00 | 15.31:Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. | 46.75 | sqm | 210 ₹9,817.5 | 201 ₹9,396.75 | 185 ₹8,648.75 Lowest | 217.14 ₹10,151.3 |
| 1.00 | OD60402/2025-2026:Providing and fixing pre-painted galvalume sandwich polyurethane foam (PUF) roof sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 30mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 100 mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. PU Thickness 30 MM. | 80 | sqm | 1,918.14 ₹1,53,451.2 | 1,783 ₹1,42,640 | 1,650 ₹1,32,000 Lowest | 1,918.14 ₹1,53,451.2 |
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 772.95 | kg | 212 ₹1,63,864.55 | 213 ₹1,64,637.5 | 200 ₹1,54,589.2 Lowest | 230.93 ₹1,78,496.42 |
| 1.00 | 50.12.4.1:Providing and fixing false ceiling with 7.5 mm thick PVC plain panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete (aluminium frame work shall be paid separately) | 66.5 | sqm | 794 ₹52,801 | 738 ₹49,077 | 680 ₹45,220 Lowest | 794.01 ₹52,801.67 |
| 1.00 | 21.5:Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ). | 90.3 | kg | 780 ₹70,434 | 785 ₹70,885.5 | 725 ₹65,467.5 Lowest | 845.94 ₹76,388.38 |
Tender Value
₹4.7 L
EMD Value
₹11,782
Closing Date
8 Sept 2025, 4:00 pmClosed
ASSISTANT EXECUTIVE ENGINEER
ASSISTANT EXECUTIVE ENGINEER,PWB BUILDINGS SUB DIVISION,HARIPAD
GENERAL PWD Roads Section Kattanam Roof Truss Sheet Roofing and False ceiling works at PWD Roads Section Kattanam General Civil Work
2025_PWD_791834_1
PWD/BLDG/TR/9721/2024_5_1_1/1
Open Tender
Civil Works - Buildings
Item Rate
150 days
Haripad
Please refer Tender documents.
9 documents required · 9 mandatory
₹1,040
Yes
₹11,782
Yes
15 Oct 2025
27 Aug 2025
10 Sept 2025
27 Aug 2025
8 Sept 2025
27 Aug 2025
Amount
Roof Truss work
15.31:Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
OD60402/2025-2026:Providing and fixing pre-painted galvalume sandwich polyurethane foam (PUF) roof sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 30mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 100 mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. PU Thickness 30 MM.
50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
50.12.4.1:Providing and fixing false ceiling with 7.5 mm thick PVC plain panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete (aluminium frame work shall be paid separately)
21.5:Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ).
M Chandrasekharan Unnithan (BID ID -2324600)
Vishnujith.R (BID ID -2319926)
JINUMOL A K (BID ID -2325759)
Bidder Name
M Chandrasekharan Unnithan
Vishnujith.R
JINUMOL A K
Anup S Nair
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1306043.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .