GENERAL-Moodapuzha Check dam - Improvements to Moodapuzha check dam in Koratty Panchayat - Fabrication, painting erection of shutter with hoisting arrangements - Mechanical works

Amount

Dismantling the existing shutters

OD14213/2022-2023:Dismantling of the Canal Shutter ( Up to 2 Tonne weight ) / Hoisting Unit / Embedded parts etc. of the same and stacking at a distance of 100 meter including hire of machinery labour etc. complete as directed by the departmental officer at the site.(Weight of the unserviceable shutters and embedded parts may be calculated as 60% and unserviceable hoisting units as 80 % )

Supply, fabrication, painting, conveyance and erection of embedded parts, shutter and hoisting

OD14191/2022-2023:Supply of MS round bar including cost of conveyance charges

OD14192/2022-2023:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD14193/2022-2023:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

85.103:Supply of MS checquered plates including cost of conveyance charges

OD14237/2022-2023::Supply of Fastners ( bolts up to 300 mm long ), nuts and washers ) including cost of conveyance charges

OD14282/2022-2023:Supply of 25mm NB GI Pipe

OD14283/2022-2023:Supply of 32NB GI Pipe

OD14194/2022-2023:Fabrication and erection of Embedded Parts for canal shutters(Up To 2 Tonne<br>Weight) and accessories as per approved specifications, drawing and direction of deptl. officer at site<br>including cost of labour, machinery all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied.

OD14195/2022-2023::Fabrication and supply of Structural steel canal shutters ( Up to 2 tonne weight ) /Hoisting Bridge /Platfurm and accessories etc. for the same as per approved specifications, drawings and directions of deptl fficer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

85.115:Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

OD14281/2022-2023:Additional conveyance to the materials from road to site including cost of handling charges labour etc complete as per the direction of Departmental officers at site

OD14196/2022-2023:Erection of the canal shutter (Up to 2 Tonne weight) /Hoist Bridge /Platform including hand rails . lader etc for the same including, alignment correcting and setting complete including cost of all labour, machinery , incidental and conveyance, lead and lift charges etc complete but excluding cost of material already supplied.

Stainless steel embedded parts

OD14214/2022-2023:Fabrication, Supply, erection and assembling in correct position and alignment by welding SS Embedded parts in 304L Grade like roller track, seal track,Seal seat etc as per approved specifications, drawings and directions of deptl officer at site including cost of all materials,labour,machinery for planing, welding,shearing, grinding etc,lead and lift, conveyance, incidental and handling etc complete

Centering shuttering and concreting

5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

4.2.3:Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

Operating mechanism

OD14190/2022-2023:od47995/2021_2022/MH :provinding EN Screw rod 7.50ton capacity 4M lift screw hoist having one number of EN8 screw shaft having a lifting speed of around 5.00cm/Min for 24rpm of hand operation including cost of all materials, labour, hire charges and conveyanc

OD25013/2022-2023:Providing of Double worm and pinion having a lifiing speed of around 5.00 cm/min for hand operation / manual operation driven with chain and sprocket including cost of all materials, labour, hire charges and conveyance.

OD25422/2022-2023:Supply of sprocket & chain ( 5:1 ratio ) mounting along with the hoisting unit in align with shutter including cost of all materials , labour etc. complete.

OD25009/2022-2023:Supply of Plummer block SN511 with self aligning ball bearing 1211K, adapter sleeve H211 and locating rings FRB 11.5/100 (2 nos) for shaft of diameter 50mm.

OD25010/2022-2023:Supply and stacking of pad lock

OD25011/2022-2023:Supplying and fixing of tower bolt

OD25012/2022-2023:Supply of Oxidised mild steel butt hinges 125x65x2.12 MM

OD25101/2022-2023:SUPPLYING and APPLYING GREASE on NEW SCREW ROD for CANAL GATE

Rubber seals

85.116:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

85.118:Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

Thrust rollers

OD24833/2022-2023:Supplying and fixing cast steel thrust roller assembly having 250mm Dia, 50mm tread width, SS(304) shaft and 22213E self aligning spherical roller bearing and accessories as per approved specifications and drawings including cost of all materials, machineries, labour , all lift and lead, incidental and conveyance charges etc complete

SUMESH E S

Bidder Name

SUMESH E S

Fabtech Engineers and Contractors