Maintenance and Erection work of HT/LT line and TC network for Rumla Sub-Division for TASP & Other Various schemes in various Feeder under Valsad-Rural Division.

Sr. Item Code Details of Works Unit Qty. Rate Amount

9924000001 Cutting of Tree branches

1 Per Tree 57/-

surrounding HT/LT line

9924000002 Replacement of old jumpers

& providing new double

2 jumpers with 8" binding [D No 90/-

Type] & capsuling with PVC

9924000005 Support pole for Stay

9924000006 Pin binding of conductor

11/22kv Pin insulator

9924000007 Pin binding of conductor

11/22kv Pin insulator per

pole in coastal area with

9924000008 Pin binding of conductor LT

shackle insulator

9924000009 Replacement of one/both

disc insulator at strain pole

9924000010 Replacement of LT shackle

insulator at cut point

9 9924000011 Re-fixing of V cross Arm No. 61/-

9924000012 Replacement of V cross Arm

(With Transportation & Painting)

9924000013 Re-fixing of Top fitting in

proper position

12 9924000014 Replacement of Top fitting No. 51/-

13 9924000015 Replacement of LT cross Arm No. 105/-

9924000016 Providing DO fuse on DP with

14 carting & jumpuring(ONE DO No. 243/-

9924000017 Numberings of pole with

paint by preparing back

ground of one colour and

have lettering(height 3" *

width 0.5") using stencil

9924000018 Fixing of MMB(1PH.) at

9924000019 Fixing of MMB(3PH.) at

9924000020 Replacement of (1ph.) meter

9924000021 Replacement of (1ph.) meter

9924000022 painting consumer no. on

MMB (Urban) (with letter

size height 40mm* width

9924000023 painting consumer no. on

MMB (Rural) (with letter

size height 40mm* width

9924000024 Replacement of deteriorated

Single phase Service line

9924000025 Fixing of new dist. Box with

23 complete wiring including No. 816/-

clamps, nut bolts etc.

9924000026 Repairing of guarding

24 involving reshaping of bearer R Mtr. 25/-

wire cross lacing binding etc.

9924000027 Painting of steel fabricated

25 material of RSJ DO DP No. 2406/-

structure with paint

9924000028 Painting of steel fabricated

material of RSJ pole

mounted transformer double

pole structure with paint

9924000029 Painting of steel fabricated

27 material of RSJ single pole No. 902/-

9924000030 painting of steel fabricated

28 material of PSC Single pole No. 135/-

(HT line) with paint

9924000031 painting of steel fabricated

29 material of PSC DO DP No. 362/-

double pole with paint

9924000032 painting of steel fabricated

material of PSC double pole

at pole mounted transformer

9924000033 Providing line separator

9924000034 Providing line separator

9924000035 Replacement / Providing of

stay insulator along with

adjustment of tension in stay

9924000036 Replacement of deteriorated

/providing LT dist. Box with

new up to 100KVA capacity &

crediting it to store.

9924000037 Replacement of deteriorated

/providing LT dist. Box with

new above 100KVA capacity

& crediting it to store.

9924000038 Adjustment of tension in stay

37 9924000039 Refitting of LA No. 31/-

9924000040 Converting pin point to

Shackle point including

38 location 2232/-

dismantling & restringing

9924000041 replacement of 11KV Pin

39 insulator with providing new No. 60/-

double pin binding

9924000042 replacement of 22KV Pin

insulator by new 11kv pin

40 insulator with spares & No. 81/-

providing new double pin

9924000043 Providing 11kv double disc

41 insulators with binding & No. 161/-

9924000045 Replacement of existing

42 11kv conductor (all size) with Cond/KM 4354/-

new double pin binding

9924000046 Plumbing of PSC Pole with

straightening at pin point

9924000047 Plumbing of PSC Pole with

44 straightening at tension No. 373/-

9924000048 Plumbing of tilted DP

structure (PSC/RSJ/STP)

with refilling of stone

9924000049 Providing new 11kv AB /GO

switch with fabrication and

46 insulated colour code Set 1290/-

jumper, binding, lugs etc.

Replacement of old 11kv AB

47 /GO switch with providing

new insulated jumper,

binding, lugs etc.

9924000052 Providing cage type loop

48 guard in vertical LT line with per pole 53/-

using PVC reel insulators etc.

9924000053 Labour charges for

replacement /providing of

49 MMB & service with all No. 644/-

accessories for three phase

9924000054 Labour charges for

replacement /providing of

50 MMB & service with all No. 554/-

accessories for single phase

9924000055 Dismantling of existing

Dist.X'mer center (RSJ /STP

POLE) 25/63/100/200 KVA

with all fabrication &

crediting the old material to

9924000056 Disconnection from LT pole

9924000057 Reconnection from LT pole

(payment after receipt of R/C

9924000058 Disconnection from LT pole

9924000059 Reconnection from LT pole

(payment after receipt of R/C

9924000060 Dismantling & removing of

56 service line from pole & No. 111/-

crediting to S/dn (1 ph.)

9924000061 Dismantling & removing of

57 service line from pole & No. 205/-

crediting to S/dn (3 ph.)

9924000062 Reconnection of service line

58 complete with PVC cable No. 244/-

9924000063 Reconnection of service line

59 complete with PVC cable (3 No. 328/-

9924000064 Providing spiral type earthing

by G.I. NO 8(weight 2kg -5mtr

in length) with salt and coal

10kg each, including pvc rigid

60 pipe 20mm dia( 1.5mtr length) No. 816/-

to pass exposed part of G.I.

wire at consumer end with all

materials, earth resistance

should be less than 2 ohms

9924000070 Providing and fixing of signle

core 1.5 sq mm single strand per

copper insulated cable with meter

cable nail clip for spiral type

earthing at consumer end. The

end of G.I. no 8 is to be

connected by connector with

copper cable of which other

end shall be connected to the

earth terminal of meter box.

This item shall be used in

location where there is more

distance between earth

terminal and earthing terminal

of meter. (All materials

supplied by contractor)

9924000065 Stringing of LT ABC of 1*35

including fitting of all

accessories i.e. special

design suspension / tension

clamp, fixing of cross arm, LT

shackle insulator etc. for

fixing of messenger wire and

inclusive of dismantling

charge of existing bare

62 conductor and crediting in to KM 8922/-

store & dismantling of

service line from LT bare

conductor and to provide

service connection on Aerial

Bunch Cable by insulated

piercing connectors through

service connection box

complete as required &

directed by Engineer in

9924000066 Stringing of LT ABC of 3*50

SQ MM including fitting of all

accessories i.e. special

63 design suspension / tension KM 22303/-

clamp, fixing of cross arm, LT

shackle insulator etc. for

fixing of messenger wire and

inclusive of dismantling

charge of existing bare

conductor and crediting in to

store & dismantling of

service line from LT bare

conductor and to provide

service connection on Aerial

Bunch Cable by insulated

piercing connectors through

service connection box

complete as required &

directed by Engineer in

9924000067 Stringing of 11KV ABC of

including fitting of all

accessories i.e. special

design suspension / tension

clamp, fixing of cross arm,

binding to pin insulator,

preparing shackle point,

jumpers etc. and inclusive of

dismantling charge of

existing bare conductor and

crediting in to store complete

as required & directed by

Engineer in Charge.

9924000068 Stringing of 22 KV ABC OF

including fitting of all

accessories i.e. special

design suspension / tension

clamp, fixing of cross arm,

binding to pin insulator,

preparing shackle point,

jumpers etc. and inclusive of

dismantling charge of

existing bare conductor and

crediting in to store complete

as required & directed by

Engineer in Charge

9924000069 Stringing of LT ABC of 2*50

SQ MM including fitting of all

accessories i.e. special

design suspension / tension

clamp, fixing of cross arm, LT

shackle insulator etc. for

fixing of messenger wire and

inclusive of dismantling

charge of existing bare

66 conductor and crediting in to KM 15613/-

store & dismantling of

service line from LT bare

conductor and to provide

service connection on Aerial

Bunch Cable by insulated

piercing connectors through

service connection box

complete as required &

directed by Engineer in

Total of schedule - B2

Total of schedule B1 & B2

(+)_______%Above, (-)_______%Below, Rate to Rate…..

Net Total of Schedule ‘B1 & B2:

Amount in Words: (Twenty-Five Lacs Only)

1. Whatever Steel Material removed after replacement should be credited to Store.

2. The rates are inclusive of PF & Work Contract Tax & excluding of GST.

3. Contractor has to carry out work under Rumla Sub-Division under Valsad-Rural Division.

4. DGVCL will provide 1ph & 3ph LT Ariel Bunch Cable 11/22kv HT ABC with necessary

accessories to the contractor.

5. The rates are inclusive of dismantling charges of existing bare conductor and crediting in to

store & dismantling of service lines from LT bare conductor and to provide service

connections on ABC by insulated pierce connectors through service connection box.

6. The contractor has to collect all the required materials from DGVCL store as well as

credit the dismantle material to the DGVCL store at their cost.

7. DGVCL will provide key material like M.S. materials, ABC/Bare conductors, PSC/RSJ Poles,

Insulators, Fabricated materials etc. to the contractor.

8. All fabricated items shall be fabricated as per DGVCL approved drawing and by welding rods

confirming to the relevant ISI specification and as directed by Engineer in charge.

9. Necessary electricity connection for fabricated items shall be provided by DGVCL on payment

of required charge for connection & electricity bill of the same shall be paid by the agency.

10. All the rates are inclusive of PF and Exclusive of GST applicable time to time.

11. All steel material is to be painted as below:

a. Scrubbing of rusted surface properly before applying the paints on to the RSJ poles

& steel fabricated materials of RSJ/PSC poles is must require.

b. Two coats of approved ISI mark red oxide (primer) is to be properly painted for

the RSJ poles & steel fabricated materials of RSJ/PSC poles.

c. Two coats of approved ISI mark silver paint (i.e. triple mangoes or equivalent quality

silver paint) are to be properly painted on to the RSJ poles & steel fabricated materials

of RSJ/PSC poles.

Executive Engineer (O&M)

Valsad Rural Division.