Annual rate contract for Maintenance and Renovation work for various Road of R & B Sub Division Tharad, Dist. Vav-Tharad. ( Pro. Jungle Cutting, Earth Work, Metal , Asphalt Work , Furniture work & other Misc. Work etc.)

Name of Work :-

Annual rate contract for Maintanance and Renovation work for various Road of R & B Sub Division

Tharad, Dist. Vav-Tharad. ( Pro. Jungle Cutting, Earth Work, Metal , Asphalt Work , Furniture work &

other Misc Work etc.)

BILL OF QUANTITY

Quantity Discription Rate in words Per Amount Rs

1 1.00 Clearing and grubbing road land including uprooting 28455.09 Rupees Hact

rank vegetation grass bushes, shrubs, sapling and trees Twenty Eight

girth up to 300 mm removal of stumps of trees cut Thousand

earlier and disposal of unserviceable materials (C) By

mechanical means in area of light jungle

2 1.00 Clearing and grubbing road land including uprooting 34889.38 Rupees Thirty Hact

rank vegetation grass bushes, shrubs, sapling and trees Four

girth up to 300 mm removal of stumps of trees cut Thousand

earlier and disposal of unserviceable materials (C) By

mechanical means in area of thorny jungle

3 1.00 Engaging earth excavator for scarifying existing B.T. 4.57 Rupees Four Smt

surface 25mm to 30mm depth including stacking And Paise Fifty

useful materials on road side and disposing off Seven Only

remaining stuff and Hire charges of excavator

including diesel labourers drivers etc complete as

4 1.00 Clearing and grubbing road land including uprooting 84255.99 Rupees Eighty Hact

rank vegetation grass bushes,shrubs,sapling and trees Four

girth up to 300 mm removal of stumps of trees cut Thousand Two

earlier and disposal of unserviceable materials(A) By

manual means in area of light jungle

5 1.00 Clearing and grubbing road land including uprooting 112341.88 Rupees One Hact

rank vegetation grass bushes,shrubs,sapling and trees Lakh(s) Twelve

girth up to 300 mm removal of stumps of trees cut Thousand

earlier and disposal of unserviceable materials(A) By

manual in area of thorny jungle

6 Earthwork for embankment including breaking clods, Rupees Nil

dressing with all lead and lift (excluding watering and

1.00 (A) From Borrow pits within land width 214.89 Rupees Two Cmt

Quantity Discription Rate in words Per Amount Rs

1.00 (B) From Borrow area within 0.5 Km. lead 219.47 Rupees Two Cmt

1.00 (C) From Borrow area within 1.0 Km. lead 223.59 Rupees Two Cmt

And Paise Fifty

1.00 (D) From Borrow area within 2.0 Km. lead 231.45 Rupees Two Cmt

1.00 (E) From Borrow area within 3.0 Km. lead 239.07 Rupees Two Cmt

7 1.00 Rolling and consolidation using vibratory road roller 8 - 33.09 Rupees Thirty Cmt

10 tonne capacity (incl. watering)(A) Earth work (layer Three And

not exceeding 200mm thickness) Paise Nine

8 1.00 Scarifying graveled macadam or bitumen macadam 41.60 Rupees Forty Smt

surface 6 cm.To10 cm. Depth including stacking useful One And Paise

materials on road side and disposing of remaining stuff. Sixty Only

9 1.00 Box cutting the road surface to proper slop and camber 215.62 Rupees Two Cmt

for making a base of road work including removing the Hundred

excavated stuff and depositing on the road side slope Fifteen And

as directed upto50 mts, lead.

10 1.00 Construction of granular sub-base(Gr : I) by providing 2135.14 Rupees Two Cmt

coarse graded material combition of M.C. aggregates Thousand One

and Sand spreading in uniform layers with motor Hundred

grader on prepared surface, mixing by mix in place

method with rotavator at OMC, and compacting with

vibratory roller to achieve the desired density, complete

as per clause 401. (Table:- 400- 2) Grading : I

11 1.00 Proviidng and laying W.B.M. of M.C. metal of size 45 2538.13 Rupees Two Cmt

mm to 63 mm size including 20% Gritt {Stone scrinning} Thousand Five

& stone dust as filler including spreading, watering & Hundred

consolidaion by vibratory roller 80KN to 100KN static

Quantity Discription Rate in words Per Amount Rs

12 1.00 Providing, laying, spreading and compacting graded 2223.01 Rupees Two Cmt

stone aggregate to wet mix macadam specification Thousand Two

including premixing the Material with water at OMC in Hundred

mechanical mix plant carriage of mixed Material by

tipper to site, laying in uniform layers with paver in sub-

base / base course on well prepared surface and

compacting with vibratory roller to achieve the desired

13 1.00 Providing and applying Tack coat with bitumen VG 30 22.03 Rupees Smt

on prepared surface of B.T Surface including clearing Twenty Two

the road surface and spraying tack Coat of the rate of And Paise

14 1.00 Providing and laying 37.50 mm/ 50 mm thick 4180.39 Rupees Four MT

bituminous macadam with B.T. Aggregates as per Thousand One

M.O.R.T.& H gradation and asphalt grade VG-30 for for Hundred

mixing @ 34.00 Kg. / M.T. i.e. 3.4% by total weight of

the mix, including heating the aggregates and asphalt

by continuous batching of drum mix plant and

spreading the same by paver finisher and consolidation

with vibratory roller 80 to 100 KN static weight

including providing all materials, equipments, tools and

plant, oil, kerosene, firewood, labour charges etc.

comp. using contractor's own machineries, drum mix

plant and paver finisher etc. complete.

15 1.00 Providing & laying 37.50/50.00 mm thickBituminous 4293.06 Rupees Four MT

Macadam ( B.M.) with B.T. aggregates as per Thousand Two

M.O.R.T.&H. specification & with michanical sprayer Hundred

& bitumin grade ( VG - 30) for mixing at the rate of

Kg./M.T. i.e.3.40% of total weight of mix including

heating the aggregare & asphalt in continuous batching

drum mix plant and spreading the same by paver

finisher and consolidation with vibratory roller

including paving all materials equipments, tools &

plants, fire wood, oil, kerosene, labour charges etc

complete using contractor's own machinery drum

mix plant Tripper & Laying Manually etc.

complete.(Without Tack Coat)

Quantity Discription Rate in words Per Amount Rs

16 1.00 Providing and laying 50 mm thick Compacted D.B.M 5053.03 Rupees Five MT

with B.T. Aggregates as per M.O.R.T.& H gradation and Thousand Fifty

asphalt grade VG-30 for for mixing @ 45.00 Kg. / M.T. Three And

i.e. 4.5% by total weight of the mix, including heating

the aggregates and asphalt by continuous batching of

drum mix plant and spreading the same by paver

finisher and consolidation with vibratory roller 80 to

100 KN static weight including providing all materials,

equipments, tools and plant, oil, kerosene, firewood,

labour charges etc. comp. using contractor's own

machineries, drum mix plant and paver finisher etc.

17 1.00 Providing and laying 50 mm thick Compacted 4620.75 Rupees Four MT

D.B.M with B.T. Aggregates as per M.O.R.T.& H Thousand Six

gradation and asphalt grade VG-30 for for mixing @ Hundred

45.00 Kg. / M.T. i.e. 4.5% by total weight of the mix,

including heating the aggregates and asphalt by

continuous batching of drum mix plant and

spreading the same by paver finisher and

consolidation with vibratory roller 80 to 100 KN static

weight including providing all materials,

equipments, tools and plant, oil, kerosene,

firewood, labour charges etc. comp. using

contractor's own machineries, drum mix plant and

Manually etc. complete.

18 1.00 Providing & laying 30 mm. thick Compacted Bituminous 5669.13 Rupees Five MT

Concrete (B.C.) with BT aggregate as per Thousand Six

MORT&H gradation & specification with asphalt Hundred Sixty

(VG-30) for mixing at the rate of 55 Kg./M.T. i.e.

5.50% of total weight of total mix including heating the

aggregate & asphalt in continuous batching drum mix

plant & spreading the same by paver finisher &

consolidation with vibratory roller & flushing sand @

0.30 Cum/ 100 Smt. including providing all materials

equipments, tools & plants, fire wood, oil, kerosene,

labour charges etc complete using constrictor’s own

machinery drum mix plant , Tripper & paver

finisher etc complete.(Without Tack Coat)

Quantity Discription Rate in words Per Amount Rs

19 1.00 Providing & laying 30 mm. thick Compacted 5236.85 Rupees Five MT

Bituminous Concrete(B.C.) with BT aggregate as per Thousand Two

MORT&H gradation & specification with asphalt Hundred

(VG-30) for mixing at the rate of 55 Kg./M.T. i.e.

5.50% of total weight of total mix including heating the

aggregate & asphalt in continuous batching drum mix

plant & spreading the same Manually & consolidation

with vibratory roller & flushing sand @ 0.30 Cum/

100 Smt. including providing all materials

equipments, tools & plants, fire wood, oil,

kerosene, labour charges etc complete using

constrictor’s own machinery drum mix plant , Tripper

& laying manually etc complete.(Without Tack Coat)

20 1.00 Providing & laying 25mm. thick compacted SDBC with 5433.80 Rupees Five MT

B.T. Stone chips as per MORT & H gradation & Thousand

specification with bulk asphalt VG 30 for mixing at the Four Hundred

rate of 50.00 Kg./MT by wt. of total mix i.e.(5.00% by

weight of total mix) incl. heating the asphalt &

aggregates by contineous batching drum mix plant &

spreading the same by paver finisher incl. rolling &

Consolidation with 10-12 tonnes vibratory & paver

roller & pro. all materials, equipments, tools and plants,

fire wood, oil, kerosene, labour charges etc and using

contractor's own machinaries drum mix plant & paver

finisher including supplying etc. complete

21 1.00 Providing & laying 25mm. thick compacted SDBC with 5001.52 Rupees Five MT

B.T. Stone chips as per MORT&H gradation & Thousand One

specification with bulk asphaltVG 30 for mixing at And Paise Fifty

the rate of 50.00 Kg./MT by wt. of total mix i.e.(5.00%

by weight of total mix) incl. heating the asphalt &

aggregates by contineous batching drum mix plant

& spreading the same by paver finisher incl. rolling &

Consolidation with 10-12 tonnes vibratory & paver

roller & pro. all materials, equipments, tools and

plants, fire wood, oil, kerosene, labour charges etc and

using contractor's own machinaries drum mix plant,

Tripper , Rolller & Laying manually including

supplying etc. complete (Without tack coat)

Quantity Discription Rate in words Per Amount Rs

22 1.00 Providing & Laying 20 mm thick Mix Seal Surfacing 5472.18 Rupees Five MT

using stone chipping as per MORT & H gradition & Thousand

specification & Asphalt grade VG- 30 for mixing @ Four Hundred

50.90 Kg./ M.T. i.e. 5.09 % by Weight of total mix

including heating the aggregate in continuous batching

drum mix plant, transporting the mix and spreading the

same by paver finisher & consolidation with vibratory

roller & flushing sand @ 0.30 Cum/100 Smt. including

providing all materials equipments, tools & plants , fire

wood, oil , kerosene, labour charges etc. complete

using contractor's own machinery drum mix plant &

paver finisher etc. complete.

23 1.00 Supplying of Mix Seal Surfacing using stone chipping as 5038.89 Rupees Five MT

per MORT & H gradition & specification & Asphalt Thousand

grade VG- 30 for mixing @ 50.90 Kg./ M.T. i.e. 5.09 % Thirty Eight

by Weight of total mix including heating the aggregate

in continuous batching drum mix plant, transporting

the mixed material by tripper trucks and spreading the

premixed material for patchwork incl. cleaning the

patch area spreading and hand ramming by koba etc.

comp. with contractor's own machineries hot mix

plant,trucks all labours including the cost of asphalt

and aggregates.

24 1.00 Providing and laying asphalt painting on BT surface 51.51 Rupees Fifty Smt

with bitumen grade VG-30 at the rate of 5 Kg /10 Sqm. One And Paise

By mechanical sprayer and spreading the stone dust on Fifty One Only

prepared surface at the rate of 0.03 Cum. / 10 Sqm. etc.

complete and rolling with roller and brushing etc.

25 1.00 Supplying, B.T. machine crushed metal of 45 to 63 mm 1417.29 Rupees One Cmt

size approved quality & gradation on road site etc. Thousand

comp. including all kind of taxes and royalites and Four Hundred

filling measure boxes etc. comp.

26 1.00 Supplying Stone screening 13.2mm size of approved 1405.96 Rupees One Cmt

quality and gradation on road site etc. comp. including Thousand

all kind of taxes and royalites and filling measure boxes Four Hundred

Quantity Discription Rate in words Per Amount Rs

27 1.00 Supplying stone dust of approved quality on road site 1178.71 Rupees One Cmt

etc. comp. including all kind of taxes and royalites and Thousand One

filling measure boxes etc. comp. Hundred

28 1.00 Spreading the stone aggregates for soiling and W.B.M. 262.24 Rupees Two Cmt

including filling the interstices forming the surface to Hundred Sixty

required camber and gradient. Two And Paise

29 1.00 Spreading blindage / stone dust on road crust filling the 154.84 Rupees One Cmt

gaps in metal and leveling to camber and gradient as Hundred Fifty

directed. (I) Stone Dust / Screening Four And

30 1.00 Rolling and consolidation using vibratory road roller 8 - 59.09 Rupees Fifty Cmt

10 tonne capacity (C) Water bound Macadam/WMM Nine And

31 1.00 Collecting, Carting, stacking and Spreading of Quarry 1450.36 Rupees One Cmt

Spall approved quality and gradation on road site etc. Thousand

comp. including all kind of taxes and royalties and Four Hundred

Fifty And Paise

filling measure boxes etc. comp.(A) in Cmt Basis.

Thirty Six Only

32 1.00 Collecting, Carting, stacking and Spreading of Quarry 941.32 Rupees Nine Mt

Spall approved quality and gradation on road site etc. Hundred Forty

comp. including all kind of taxes and royalties etc. One And Paise

comp.(B) in MT Basis.

33 1.00 Rolling and consolidation of soling including filling in 22.75 Rupees Smt

depression which occur during the process, with power Twenty Two

roller 8 tonne to 12 tonne. And Paise

34 1.00 Collecting, Carting, stacking and Spreading of Rubble 1528.13 Rupees One Cmt

stone approved quality on road site etc. comp. Thousand Five

including all kind of taxes and royalties and filling Hundred

measure boxes etc. comp.(A) in Cmt Basis.

35 1.00 Collecting, Carting, stacking and Spreading of Rubble 976.67 Rupees Nine Mt

stone approved quality on road site etc. comp. Hundred

including all kind of taxes and royalties etc. comp.(A) in Seventy Six

36 1.00 Earthwork in cuting in all sorts of soil and soft murrum 134.13 Rupees One Cum

including conveying and spreading the stuff, Hundred

embankment as and where directed within 200meters Thirty Four

from the end of the cutting with all required lead and

Quantity Discription Rate in words Per Amount Rs

1.00 Add for Above 200 meter upto 300 meter 37.93 Rupees Thirty Cum

1.00 Add for Above 300 meter upto 400 meter 56.13 Rupees Fifty Cum

1.00 Add for Above 400 meter upto 500 meter 93.54 Rupees Ninety Cum

37 1.00 Supplying of Sand on road site as directed. 828.60 Rupees Eight Cmt

38 1.00 Supplying of Murrum on road site as directed. 420.45 Rupees Four Cmt

39 1.00 Supplying of Crushed Stone Kapachi 10 to 20mm size on 1335.21 Rupees One Cmt

road site as directed. Thousand

40 1.00 Supplying of Crushed Stone Grit 6 to 10mm size on 1266.28 Rupees One Cmt

road site as directed. Thousand Two

41 1.00 Supplying of H.B. Metal 25 to 90mm size on road site as 1344.88 Rupees One Cmt

directed. Thousand

42 1.00 Supplying of Stone Dust on road site as directed. 1178.71 Rupees One Cmt

43 1.00 Supplying of Cement 53 grade OPC 442.99 Rupees Four Cmt

Quantity Discription Rate in words Per Amount Rs

44 1.00 Sperading of Metal 45 to 63mm, 25 to 50mm & 6 to 442.99 Rupees Four Cu.mt.

25mm, 20mm to 90mm Quarry Spaul Hundred Forty

45 1.00 Sperading Solling stone (Rubble) 254.75 Rupees Two Cu.mt.

46 1.00 Providing and laying boulders apron on river bed for 1233.20 Rupees One Cu.mt.

protection against scour with stone boulders Thousand Two

weighing not less than 40 kg each complete as per Hundred

drawing and Technical specification.

Boulder Laid Dry Without Wire Crates.

47 1.00 Spreading blindage or road crust filling the gaps in 154.84 Rupees One Cu.mt.

metal andleveling to camber and gradient as directed.(i) Hundred Fifty

Murrum / Sand Four And

48 1.00 Rolling and Consolidation of soiling including filling in 22.75 Rupees Sq.mt.

depression which occu during the process. with power Twenty Two

roller 8 tonne to 12 tonne And Paise

49 1.00 Filling around pipe with Murrum/ Sand including 84.69 Rupees Eighty Cmt

dressing tampering etc, completed. Four And

50 1.00 Rolling and consolidating water bound macadam 18.71 Rupees Sq.mt.

(except laterite and Kankar) including watering not Eighteen And

exceeding 150mm thickness (Main layer including Paise Seventy

binding materials ) including filling in depressions

which occur during the process.(A) With power roller

exceeding 8 tonne and not exceeding 12 tonne.

51 1.00 Providing and fixing ordinary Kilometer stone of precast 1293.39 Rupees One No

C.C. 1:2:4 including necessary reinforcement as per Thousand Two

I.R.C. type design in C.C. 1:4:8 including letter and Hundred

paints etc. complete (For N.H., S.H. and M.D.R.)

52 1.00 Providing and fixing ordinary Kilometer stone of precast 704.33 Rupees Seven No

C.C. 1:2:4 including necessary reinforcement as per Hundred Four

I.R.C. type design in C.C. 1:4:8 including And Paise

painting,lettering etc. complete (For O.D.road V.R.)

Quantity Discription Rate in words Per Amount Rs

53 1.00 Providing and fixing 5th Kilometer stone of precast C.C. 1935.15 Rupees One No

1:2:4 including necessary reinforcement as per I.R.C. Thousand

type design in C.C. 1:4:8 including painting, lettering Nine Hundred

etc. complete (For N.H., S.H. and M.D.R.)

54 1.00 Providing and fixing Pre Cast hectometer stone as per 356.50 Rupees Three No

I.R.C. type design including painting, lettering etc. com Hundred Fifty

plate. (II) Fixing in C.C.1:5:10 Six And Paise

55 1.00 Providing and fixing Guard stone as per I.R.C. type 103.56 Rupees One No

design including White washing etc. complete. (a) Hundred

Fixing in earth {Pg.No. 214 Item code 26045A} Three And

Paise Fifty Six

56 1.00 Providing and fixing Boundary stone as per I.R.C. design 193.76 Rupees One No

including painting, carving lettering etc. complete.(ii) Hundred

Fixing in C.C. 1:5:10 Ninety Three

57 1.00 Chevron sign :-Providing and fixing sign boards made 4681.35 Rupees Four No

out of 1.5mm aluminium sheet / 3mm ACP (Aluminum Thousand Six

composite Panel); size 60x50 cm as per design of IRC-67- Hundred

2012. Pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and two

coats of best quality epoxy paint ;reflectorised with Only

Micro Prismatic Grade retro refiectivesheeting of Type-

11 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.3 mtr long stand post of 75 x

75 x 6mm / 65NB Circular MS Pipe as required and

frame fabricated from suitable size iron angle of 50 x

x 5mm; painted with bestquality epoxy coatings in

black and white bends. the details of symbol or

inscription / numerals for each board shall be as per the

instruction of engineer in charge.The fixing at site shall

be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each

leg.including excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for

years for the Retro reflective sheeting from originaa

manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the

product offered shall be submitted by contractor. (A)

Class-C Type-11 Retro Reflective sheeting

Quantity Discription Rate in words Per Amount Rs

58 1.00 Chevron sign :-Providing and fixing sign boards made 3711.75 Rupees Three No

out of 1.5mm aluminium sheet / 3mm ACP (Aluminum Thousand

composite Panel); size 60x50cm rectangular as per Seven

design of IRC-67-2012. Pre treated with phospheting

process & acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint ; Five Only

reflectorised with High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D-4956 and

latest M.O.S.T.Specifications; 3.3 mtr long stand post of

Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as

required and frame fabricated from suitable size iron

angle of35x35x3mm; painted with bestquality epoxy

coatings in black and white bends. the details of

symbol or inscription / numerals for each board shall be

as per the instruction of engineer in charge. The fixing

at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms.

for each leg including excavation, curing etc.complete

under the supervision of engineer in charge. A warranty

for 7 years for the Retro reflective sheeting from

original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab

for the product offered shall be submitted by

contractor. (A) Class-B Type-4 Retro Reflective sheeting

Quantity Discription Rate in words Per Amount Rs

59 1.00 Curve/Cautionary Warning Sign :-Providing and fixing 5077.27 Rupees Five No

sign boards made out of 2mm aluminium sheet / 4mm Thousand

ACP (Aluminum composite Panel); size 90 x 90 x 90 cms. Seventy Seven

equilateral triangle as per design of IRC-67-2012. Pre

treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats of

best quality epoxy paint ;reflectorised with Micro

Prismatic Grade retro refiectivesheeting of Type-11 as

per ASTM D-4956 and latest M.O.S.T.Specifications;

3.6mtr long stand post of 75 x 75 x 6mm / 65NB

Circular MS Pipe as required and frame fabricated from

suitable size iron angle of 35 x 35 x 3mm; painted with

bestquality epoxy coatings in black and white bends.

The details of symbol foreach board shall be as per

theinstruction of engineer in charge. The fixing at site

shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for

each leg.including excavation, curing etc.complete

under the supervision of engineer in charge. A warranty

for 10 years for the Retro reflective sheeting from

original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab

for the product offered shall be submitted by

contractor. (A) Class-C Type-11 Retro Reflective

Quantity Discription Rate in words Per Amount Rs

60 1.00 Curve/Cautionary Warning Sign :-Providing and fixing 3906.19 Rupees Three No

sign boards made out of 2mm aluminium sheet / 4mm Thousand

ACP (Aluminum composite Panel); size 90 x 90 x 90 cms. Nine Hundred

equilateral triangle as per design of IRC-67-2012. Pre

treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats of

best quality epoxy paint ; reflectorised with High

Intensity Prismatic Grade retro refiectivesheeting of

Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6mtr long stand post of Iron

Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as

required and frame fabricated from suitable size iron

angle of 35 x 35 x 3mm; painted with bestquality epoxy

coatings in black and white bends. The details of

symbol for each board shall be as per the instruction of

engineer in charge. The fixing at site shall be in 1:2:4 CC

blockof size 45 x 45 x 60 Cms. for each leg including

excavation, curing etc.complete under the supervision

of engineer in charge. A warranty for 7 years for the

Retro reflective sheeting from original manufacturer &

a certified copy of 3 year outdoor exposure test report

from third party test lab for the product offered shall be

submitted by contractor. (B) Class-B Type-4 Retro

Reflective sheeting

Quantity Discription Rate in words Per Amount Rs

61 1.00 Facility Informatory Sign :-Providing and fixing sign 5906.48 Rupees Five No

boards made out of 2mm aluminium sheet / 4mm ACP Thousand

(Aluminum composite Panel); size 80 x 60 cms Nine Hundred

rectangular as per design of IRC-67-2012. Pre treated

with phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best quality

epoxy paint ;reflectorised with Micro Prismatic Grade

retro refiectivesheeting of Type-11 as per ASTM D-4956

and latest M.O.S.T.Specifications; 3.6mtr long stand

post of 75 x 75 x 6mm / 65NB Circular MS Pipe as

required and frame fabricated from suitable size iron

angle of 35 x 35 x 3mm; painted with bestquality epoxy

coatings in black and white bends. The details of

symbol foreach board shall be as per theinstruction of

engineer in charge. The fixing at site shall be in 1:2:4 CC

blockof size 45 x 45 x 60 Cms. for each leg.including

excavation, curing etc.complete under the supervision

of engineer in charge. A warranty for 10 years for the

Retro reflective sheeting from original manufacturer &

a certified copy of 3 year outdoor exposure test report

from third party test lab for the product offered shall be

submitted by contractor. (A) Class-C Type-11 Retro

Reflective sheeting

Quantity Discription Rate in words Per Amount Rs

62 1.00 Facility Informatory Sign :-Providing and fixing sign 3990.64 Rupees Three No

boards made out of 2mm aluminium sheet / 4mm ACP Thousand

(Aluminum composite Panel); size 80 x 60 cms. Nine Hundred

rectangular as per design of IRC-67-2012. Pre treated

with phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best quality

epoxy paint ; reflectorised with High Intensity Prismatic

Grade retro refiectivesheeting of Type-4 as per ASTM D-

4956 and latest M.O.S.T.Specifications; 3.6mtr long

stand post of Iron Angle 75 x 75 x 6mm / 65NB Circular

MS Pipe as required and frame fabricated from suitable

size iron angle of 35 x 35 x 3mm; painted with

bestquality epoxy coatings in black and white bends.

The details of symbol for each board shall be as per the

instruction of engineer in charge. The fixing at site shall

be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg

including excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for

years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the

product offered shall be submitted by contractor. (B)

Class-B Type-4 Retro Reflective sheeting.

Quantity Discription Rate in words Per Amount Rs

63 1.00 Direction (Junction) Sign :-Providing and fixing sign 26572.09 Rupees No

boards made out of 2mm aluminium sheet / 4mm ACP Twenty Six

(Aluminum composite Panel); size 244x122 cms. Thousand Five

rectangular as per design of IRC-67-2012. Pre treated

with phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best quality Nine Only

epoxy paint ;reflectorised with Micro Prismatic Grade

retro refiectivesheeting of Type-11 as per ASTM D-4956

and latest M.O.S.T.Specifications; 4.0mtr long (2 Nos.)

stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as

required and frame fabricated from suitable size iron

angle of 50 x 50 x 5mm; painted with bestquality epoxy

coatings in black and white bends. The details of

symbol foreach board shall be as per theinstruction of

engineer in charge. The fixing at site shall be in 1:2:4 CC

blockof size 45 x 45 x 60 Cms. for each leg.including

excavation, curing etc.complete under the supervision

of engineer in charge. A warranty for 10 years for the

Retro reflective sheeting from original manufacturer &

a certified copy of 3 year outdoor exposure test report

from third party test lab for the product offered shall be

submitted by contractor. (A) Class-C Type-11 Retro

Reflective sheeting

Quantity Discription Rate in words Per Amount Rs

64 1.00 Direction (Junction) Sign :-Providing and fixing sign 21287.51 Rupees No

boards made out of 2mm aluminium sheet / 4mm ACP Twenty One

(Aluminum composite Panel); size 244x122 cms. Thousand Two

rectangular as per design of IRC-67-2012. Pre treated

with phospheting process & acid etching; coated with

And Paise Fifty

one coat of epoxy primer and two coats of best quality One Only

epoxy paint ; reflectorised with High Intensity Prismatic

Grade retro refiectivesheeting of Type-4 as per ASTM D-

4956 and latest M.O.S.T.Specifications; 4.0mtr (2 Nos.)

long stand post of Iron Angle 75 x 75 x 6mm / 65NB

Circular MS Pipe as required and frame fabricated from

suitable size iron angle of 50x50x5mm; painted with

bestquality epoxy coatings in black and white bends.

The details of symbol for each board shall be as per the

instruction of engineer in charge. The fixing at site shall

be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg

including excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for

years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the

product offered shall be submitted by contractor. (B)

Class-B Type-4 Retro Reflective sheeting

Quantity Discription Rate in words Per Amount Rs

65 1.00 Distance Informatory / Destination Sign :-Providing and 26572.09 Rupees No

fixing sign boards made out of 2mm aluminium sheet / Twenty Six

4mm ACP (Aluminum composite Panel); size 180x120 Thousand Five

cms. rectangular as per design of IRC-67-2012. Pre

treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats of Nine Only

best quality epoxy paint ;reflectorised with Micro

Prismatic Grade retro refiectivesheeting of Type-11 as

per ASTM D-4956 and latest M.O.S.T.Specifications;

4.0mtr long (2 Nos.) stand post of 75 x 75 x 6mm /

65NB Circular MS Pipe as required and frame fabricated

from suitable size iron angle of 50 x 50 x 5mm; painted

with bestquality epoxy coatings in black and white

bends. The details of symbol foreach board shall be as

per theinstruction of engineer in charge. The fixing at

site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms.

for each leg.including excavation, curing etc.complete

under the supervision of engineer in charge. A warranty

for 10 years for the Retro reflective sheeting from

original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab

for the product offered shall be submitted by

contractor. (A) Class-C Type-11 Retro Reflective

Quantity Discription Rate in words Per Amount Rs

66 1.00 Distance Informatory / Destination Sign :-Providing and 18254.19 Rupees No

fixing sign boards made out of 2mm aluminium sheet / Eighteen

4mm ACP (Aluminum composite Panel); size 180x120 Thousand Two

cms. rectangular as per design of IRC-67-2012. Pre

treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats of Nineteen Only

best quality epoxy paint ; reflectorised with High

Intensity Prismatic Grade retro refiectivesheeting of

Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 4.0mtr (2 Nos.) long stand post

of Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as

required and frame fabricated from suitable size iron

angle of 50 x 50 x 5mm; painted with bestquality epoxy

coatings in black and white bends. The details of

symbol for each board shall be as per the instruction of

engineer in charge. The fixing at site shall be in 1:2:4 CC

blockof size 45 x 45 x 60 Cms. for each leg including

excavation, curing etc.complete under the supervision

of engineer in charge. A warranty for 7 years for the

Retro reflective sheeting from original manufacturer &

a certified copy of 3 year outdoor exposure test report

from third party test lab for the product offered shall be

submitted by contractor. (B) Class-B Type-4 Retro

Reflective sheeting

Quantity Discription Rate in words Per Amount Rs

67 1.00 Place Identification Sign :-Providing and fixing sign 14085.46 Rupees No

boards made out of 2mm aluminium sheet / 4mm ACP Fourteen

(Aluminum composite Panel); size 150x90 cms. Thousand

rectangular as per design of IRC-67-2012. Pre treated

with phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best quality

epoxy paint ;reflectorised with Micro Prismatic Grade

retro refiectivesheeting of Type-11 as per ASTM D-4956

and latest M.O.S.T.Specifications; 4.0mtr long (2 Nos.)

stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as

required and frame fabricated from suitable size iron

angle of 35 x 35 x 3mm; painted with bestquality epoxy

coatings in black and white bends. The details of

symbol foreach board shall be as per theinstruction of

engineer in charge. The fixing at site shall be in 1:2:4 CC

blockof size 45 x 45 x 60 Cms. for each leg.including

excavation, curing etc.complete under the supervision

of engineer in charge. A warranty for 10 years for the

Retro reflective sheeting from original manufacturer &

a certified copy of 3 year outdoor exposure test report

from third party test lab for the product offered shall be

submitted by contractor. (A) Class-C Type-11 Retro

Reflective sheeting

Quantity Discription Rate in words Per Amount Rs

68 1.00 Place Identification Sign :-Providing and fixing sign 12341.52 Rupees Twelve No

boards made out of 2mm aluminium sheet / 4mm ACP Thousand

(Aluminum composite Panel); size 150x90 cms. Three

rectangular as per design of IRC-67-2012. Pre treated

with phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best quality

epoxy paint ; reflectorised with High Intensity Prismatic

Grade retro refiectivesheeting of Type-4 as per ASTM D-

4956 and latest M.O.S.T.Specifications; 4.0mtr (2 Nos.)

long stand post of Iron Angle 75 x 75 x 6mm / 65NB

Circular MS Pipe as required and frame fabricated from

suitable size iron angle of 35 x 35 x 3mm; painted with

bestquality epoxy coatings in black and white bends.

The details of symbol for each board shall be as per the

instruction of engineer in charge. The fixing at site shall

be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg

including excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for

years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the

product offered shall be submitted by contractor. (B)

Class-B Type-4 Retro Reflective sheeting

Quantity Discription Rate in words Per Amount Rs

69 1.00 Village Name Sign :-Providing and fixing sign boards 6313.51 Rupees Six No

made out of 2mm aluminium sheet / 4mm ACP Thousand

(Aluminum composite Panel); size 90x60 cms. Three

rectangular as per design of IRC-67-2012. Pre treated

with phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best quality One Only

epoxy paint ;reflectorised with Micro Prismatic Grade

retro refiectivesheeting of Type-11 as per ASTM D-4956

and latest M.O.S.T.Specifications; 3.3mtr long stand

post of 75 x 75 x 6mm / 65NB Circular MS Pipe as

required and frame fabricated from suitable size iron

angle of 35 x 35 x 3mm; painted with bestquality epoxy

coatings in black and white bends. The details of

symbol or inscription/letters / numerals for each board

shall be as per the instruction of engineer in charge.

The fixing at site shall be in 1:2:4 CC blockof size 45 x

x 60 Cms. for each leg.including excavation, curing

etc.complete under the supervision of engineer in

charge. A warranty for 10 years for the Retro reflective

sheeting from original manufacturer & a certified copy

of 3 year outdoor exposure test report from third party

test lab for the product offered shall be submitted by

contractor. (A) Class-C Type-11 Retro Reflective

Quantity Discription Rate in words Per Amount Rs

70 1.00 Village name Sign :-Providing and fixing sign boards 6397.43 Rupees Six No

made out of 2mm aluminium sheet / 4mm ACP Thousand

(Aluminum composite Panel); size 90x60 cms. Three

rectangular as per design of IRC-67-2012. Pre treated

with phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best quality Forty Three

epoxy paint ; reflectorised with High Intensity Prismatic Only

Grade retro refiectivesheeting of Type-4 as per ASTM D-

4956 and latest M.O.S.T.Specifications; 3.3mtr long

stand post of Iron Angle 75 x 75 x 6mm / 65NB Circular

MS Pipe as required and frame fabricated from suitable

size iron angle of 35 x 35 x 3mm; painted with

bestquality epoxy coatings in black and white bends.

the details of symbol or inscription / numerals for each

board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC blockof

size 45 x 45 x 60 Cms. for each leg including excavation,

curing etc.complete under the supervision of engineer

in charge. A warranty for 7 years for the Retro reflective

sheeting from original manufacturer & a certified copy

of 3 year outdoor exposure test report from third party

test lab for the product offered shall be submitted by

contractor. (B) Class-B Type-4 Retro Reflective sheeting

Quantity Discription Rate in words Per Amount Rs

71 1.00 Hazard Marker Sign :-Providing and fixing sign boards 3666.30 Rupees Three No

made out of 1.5mm aluminium sheet / 3mm ACP Thousand Six

(Aluminum composite Panel); size 90x30 cms. Hundred Sixty

rectangular as per design of IRC-67-2012. Pre treated

with phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best quality

epoxy paint ;reflectorised with Micro Prismatic Grade

retro refiectivesheeting of Type-11 as per ASTM D-4956

and latest M.O.S.T.Specifications; 1.8mtr long stand

post of 75 x 75 x 6mm / 65NB Circular MS Pipe as

required and frame fabricated from suitable size iron

angle of 35 x 35 x 3mm; painted with bestquality epoxy

coatings in black and white bends. The details of

symbol foreach board shall be as per theinstruction of

engineer in charge. The fixing at site shall be in 1:2:4 CC

blockof size 45 x 45 x 60 Cms. for each leg.including

excavation, curing etc.complete under the supervision

of engineer in charge. A warranty for 10 years for the

Retro reflective sheeting from original manufacturer &

a certified copy of 3 year outdoor exposure test report

from third party test lab for the product offered shall be

submitted by contractor. (A) Class-C Type-11 Retro

Reflective sheeting

Quantity Discription Rate in words Per Amount Rs

72 1.00 Hazard Marker Sign :-Providing and fixing sign boards 3518.69 Rupees Three No

made out of 1.5mm aluminium sheet / 3mm ACP Thousand Five

(Aluminum composite Panel); size 90x30 cms. Hundred

rectangular as per design of IRC-67-2012. Pre treated

with phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best quality

epoxy paint ; reflectorised with High Intensity Prismatic

Grade retro refiectivesheeting of Type-4 as per ASTM D-

4956 and latest M.O.S.T.Specifications; 1.8mtr long

stand post of Iron Angle 75 x 75 x 6mm / 65NB Circular

MS Pipe as required and frame fabricated from suitable

size iron angle of 35 x 35 x 3mm; painted with

bestquality epoxy coatings in black and white bends.

The details of symbol for each board shall be as per the

instruction of engineer in charge. The fixing at site shall

be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg

including excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for

years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the

product offered shall be submitted by contractor. (B)

Class-B Type-4 Retro Reflective sheeting.

Quantity Discription Rate in words Per Amount Rs

73 1.00 Regulatory / Mandatory Sign :-Providing and fixing sign 4618.73 Rupees Four No

boards made out of 2mm aluminium sheet / 4mm ACP Thousand Six

(Aluminum composite Panel); size 60 cms Dia Circle as Hundred

per design of IRC-67-2012. Pre treated with

phospheting process & acid etching; coated with one

coat of epoxy primer and two coats of best quality

epoxy paint ;reflectorised with Micro Prismatic Grade

retro refiectivesheeting of Type-11 as per ASTM D-4956

and latest M.O.S.T.Specifications; 3.6mtr long stand

post of 75 x 75 x 6mm / 65NB Circular MS Pipe as

required and frame fabricated from suitable size iron

angle of 35 x 35 x 3mm; painted with bestquality epoxy

coatings in black and white bends. The details of

symbol foreach board shall be as per theinstruction of

engineer in charge. The fixing at site shall be in 1:2:4 CC

blockof size 45 x 45 x 60 Cms. for each leg.including

excavation, curing etc.complete under the supervision

of engineer in charge. A warranty for 10 years for the

Retro reflective sheeting from original manufacturer &

a certified copy of 3 year outdoor exposure test report

from third party test lab for the product offered shall be

submitted by contractor. (A) Class-C Type-11 Retro

Reflective sheeting

Quantity Discription Rate in words Per Amount Rs

74 1.00 Regulatory / Mandatory Sign :-Providing and fixing sign 3540.12 Rupees Three No

boards made out of 2mm aluminium sheet / 4mm ACP Thousand Five

(Aluminum composite Panel); size 60 cms. Dia Circle as Hundred Forty

per design of IRC-67-2012. Pre treated with

phospheting process & acid etching; coated with one

coat of epoxy primer and two coats of best quality

epoxy paint ; reflectorised with High Intensity Prismatic

Grade retro refiectivesheeting of Type-4 as per ASTM D-

4956 and latest M.O.S.T.Specifications; 3.6mtr long

stand post of Iron Angle 75 x 75 x 6mm / 65NB Circular

MS Pipe as required and frame fabricated from suitable

size iron angle of 35 x 35 x 3mm; painted with

bestquality epoxy coatings in black and white bends.

The details of symbol for each board shall be as per the

instruction of engineer in charge. The fixing at site shall

be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg

including excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for

years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the

product offered shall be submitted by contractor. (B)

Class-B Type-4 Retro Reflective sheeting.

Quantity Discription Rate in words Per Amount Rs

75 1.00 STOP Sign :-Providing and fixing sign boards made out 7213.42 Rupees Seven No

of 2mm aluminium sheet / 4mm ACP (Aluminum Thousand Two

composite Panel); size 90 cms Octagone as per design Hundred

of IRC-67-2012. Pre treated with phospheting process &

acid etching; coated with one coat of epoxy primer and

two coats of best quality epoxy paint ;reflectorised with

Micro Prismatic Grade retro refiectivesheeting of Type-

11 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6mtr long stand post of 75 x

75 x 6mm / 65NB Circular MS Pipe as required and

frame fabricated from suitable size iron angle of 35 x

x 3mm; painted with bestquality epoxy coatings in

black and white bends. The details of symbol foreach

board shall be as per theinstruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC blockof

size 45 x 45 x 60 Cms. for each leg.including excavation,

curing etc.complete under the supervision of engineer

in charge. A warranty for 10 years for the Retro

reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test report

from third party test lab for the product offered shall be

submitted by contractor. (A) Class-C Type-11 Retro

Reflective sheeting

Quantity Discription Rate in words Per Amount Rs

76 1.00 STOP Sign :-Providing and fixing sign boards made out 6704.36 Rupees Six No

of 2mm aluminium sheet / 4mm ACP (Aluminum Thousand

composite Panel); size 90 cms. Octagonal as per design Seven

of IRC-67-2012. Pre treated with phospheting process &

acid etching; coated with one coat of epoxy primer and

Thirty Six Only

two coats of best quality epoxy paint ; reflectorised

with High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D-4956 and

latest M.O.S.T. Specifications; 3.6mtr long stand post of

Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as

required and frame fabricated from suitable size iron

angle of 35 x 35 x 3mm; painted with bestquality epoxy

coatings in black and white bends. The details of

symbol for each board shall be as per the instruction of

engineer in charge. The fixing at site shall be in 1:2:4 CC

blockof size 45 x 45 x 60 Cms. for each leg including

excavation, curing etc.complete under the supervision

of engineer in charge. A warranty for 7 years for the

Retro reflective sheeting from original manufacturer &

a certified copy of 3 year outdoor exposure test report

from third party test lab for the product offered shall be

submitted by contractor. (B) Class-B Type-4 Retro

Reflective sheeting.

Quantity Discription Rate in words Per Amount Rs

77 1.00 Parking Sign :-Providing and fixing sign boards made 7213.42 Rupees Seven No

out of 2mm aluminium sheet / 4mm ACP (Aluminum Thousand Two

composite Panel); size size 60 x 60cms. square plus 60 x Hundred

20cms rectangular additional plate as as per the design

of IRC-67-2012. Pre treated with phospheting process &

acid etching; coated with one coat of epoxy primer and

two coats of best quality epoxy paint ;reflectorised with

Micro Prismatic Grade retro refiectivesheeting of Type-

11 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6mtr long stand post of 75 x

75 x 6mm / 65NB Circular MS Pipe as required and

frame fabricated from suitable size iron angle of 35 x

x 3mm; painted with bestquality epoxy coatings in

black and white bends. The details of symbol foreach

board shall be as per theinstruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC blockof

size 45 x 45 x 60 Cms. for each leg.including excavation,

curing etc.complete under the supervision of engineer

in charge. A warranty for 10 years for the Retro

reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test report

from third party test lab for the product offered shall be

submitted by contractor. (A) Class-C Type-11 Retro

Reflective sheeting

Quantity Discription Rate in words Per Amount Rs

78 1.00 Give Way Sign :-Providing and fixing sign boards made 5077.27 Rupees Five No

out of 2mm aluminium sheet / 4mm ACP (Aluminum Thousand

composite Panel); size 90 x 90 x 90 cms. equilateral Seventy Seven

triangle as per design of IRC-67-2012. Pre treated with

phospheting process & acid etching; coated with one

coat of epoxy primer and two coats of best quality

epoxy paint ;reflectorised with Micro Prismatic Grade

retro refiectivesheeting of Type-11 as per ASTM D-4956

and latest M.O.S.T.Specifications; 3.6mtr long stand

post of 75 x 75 x 6mm / 65NB Circular MS Pipe as

required and frame fabricated from suitable size iron

angle of 35 x 35 x 3mm; painted with bestquality epoxy

coatings in black and white bends. The details of

symbol foreach board shall be as per theinstruction of

engineer in charge. The fixing at site shall be in 1:2:4 CC

blockof size 45 x 45 x 60 Cms. for each leg.including

excavation, curing etc.complete under the supervision

of engineer in charge. A warranty for 10 years for the

Retro reflective sheeting from original manufacturer &

a certified copy of 3 year outdoor exposure test report

from third party test lab for the product offered shall be

submitted by contractor. (A) Class-C Type-11 Retro

Reflective sheeting

Quantity Discription Rate in words Per Amount Rs

79 1.00 Route Marker sign :-Providing and fixing sign boards 5108.58 Rupees Five No

made out of 1.5mm aluminium sheet / 3mm ACP Thousand One

(Aluminum composite Panel); size 60x45 cm Hundred Eight

And Paise Fifty

rectangular plus 30x25cm additional plate as per

design of IRC-67-2012. Pre treated with phospheting

process & acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint

;reflectorised with Micro Prismatic Grade retro

refiectivesheeting of Type-11 as per ASTM D-4956 and

latest M.O.S.T.Specifications; 3.6 mtr long stand post

of 75 x 75 x 6mm / 65NB Circular MS Pipe as required

and frame fabricated from suitable size iron angle of

35x 35 x 3mm; painted with bestquality epoxy coatings

in black and white bends. the details of symbol or

inscription / numerals for each board shall be as per the

instruction of engineer in charge.The fixing at site shall

be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each

leg.including excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for

years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the

product offered shall be submitted by contractor. (A)

Class-C Type-11 Retro Reflective sheeting

Quantity Discription Rate in words Per Amount Rs

80 1.00 Route Marker sign :-Providing and fixing sign boards 3842.20 Rupees Three No

made out of 1.5mm aluminium sheet / 3mm ACP Thousand

(Aluminum composite Panel); size 60x45cm rectangular Eight Hundred

plus 30x25cm additional plate as per design of IRC-67-

2012. Pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and two

coats of best quality epoxy paint ; reflectorised with

High Intensity Prismatic Grade retro refiectivesheeting

of Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6 mtr long stand post of Iron

Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as

required and frame fabricated from suitable size iron

angle of 35x35x3mm; painted with bestquality epoxy

coatings in black and white bends. the details of

symbol or inscription / numerals for each board shall be

as per the instruction of engineer in charge. The fixing

at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms.

for each leg including excavation, curing etc.complete

under the supervision of engineer in charge. A warranty

for 7 years for the Retro reflective sheeting from

original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab

for the product offered shall be submitted by

contractor. (B) Class-B Type-4 Retro Reflective sheeting

81 1.00 Tree Guard sign :-Providing & fixing sign board made 531.26 Rupees Five No

out of 2mm aluminium sheet / 3mm ACP (Aluminum Hundred

composite Panel) , size 30cms diameter circle, Thirty One

pretreated with phospheting process and acid etching,

painted with one coat of epoxy primer and two coats of

best quality epoxy paint reflectorised with retro

reflective sheeting as per latest M.O.S.T. specifications.

A warranty for 10 years for the Retro reflective sheeting

from original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab

for the product offered shall be submitted by

contractor. (A) Class-C Type-11 Retro Reflective

Quantity Discription Rate in words Per Amount Rs

82 1.00 Four (Two) Lane Ahead Sign :- Providing and fixing 20052.54 Rupees No

sign boards made out of 2mm aluminium sheet / 4mm Twenty

ACP (Aluminum composite Panel); size 120x120 cms. Thousand Fifty

square plus 120x60 cm additional plate as per design of Two And Paise

IRC-67-2012. Pre treated with phospheting process & Fifty Four Only

acid etching; coated with one coat of epoxy primer and

two coats of best quality epoxy paint ;reflectorised with

Micro Prismatic Grade retro refiectivesheeting of Type-

11 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 4 mtr long stand post (2 Nos.) of

75 x 75 x 6mm / 65NB Circular MS Pipe as required and

frame fabricated from suitable size iron angle of 35 x

x 3mm; painted with bestquality epoxy coatings in black

and white bends. The details of symbol foreach board

shall be as per theinstruction of engineer in charge. The

fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x

60 Cms. for each leg.including excavation, curing

etc.complete under the supervision of engineer in

charge. A warranty for 10 years for the Retro reflective

sheeting from original manufacturer & a certified copy of

3 year outdoor exposure test report from third party test

lab for the product offered shall be submitted by

contractor. (A) Class-C Type-11 Retro Reflective

83 1.00 Kerb guard sign board (small) :- Providing & Fixing 8420.37 Rupees Eight No

sign boards made out of 2mm aluminium sheet, size 240 Thousand

x 30 cms in U spape; as per the attached drawing pre Four Hundred

treated with phospheting process & acid etching. coated Twenty And

with one coat of epoxy priemr and two coats of best Paise Thirty

quality epoxy paint reflectorised with Micro Prismatic Seven Only

Grade retro refiectivesheeting of Type-11 as per ASTM

D-4956 and latest M.O.S.T.Specifications; stand post

and frame fabricated from iron angle of 50x50x5mm,

10mm sq. bar as required, painted with best quality

epoxy coating the fixing at site shall be in 1:2:4 CC block

of size 45 x 45x 60cms for each leg, including

excavation curing etc. complete under the supervision of

engineer in charge. A warranty for 10 years for the Retro

reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test report from

third party test lab for the product offered shall be

submitted by contractor. (A) Class-C Type-11 Retro

Reflective sheeting

Quantity Discription Rate in words Per Amount Rs

84 1.00 Kerb guard sign board (Big) :- Providing & Fixing sign 19113.24 Rupees No

boards made out of 2mm aluminium sheet, size 732 x 30 Nineteen

cms in Uspape; as per the attached drawing pretreated Thousand One

with phospheting process & acid etching. coated with Hundred

one coat of epoxy priemr and two coats of best quality Thirteen And

epoxy paint reflectorised with Micro Prismatic Grade Paise Twenty

retro refiectivesheeting of Type-11 as per ASTM D-4956 Four Only

and latest M.O.S.T.Specifications ; Stand post and frame

fabricated from iron angle of 50 x50 x 5mm, 10mm sq.

bar as required, painted with best quality epoxy coating

the fixing at site shall be in 1:2:4 CC block of size 45 x

45x 60cms for each leg, including excavation curing etc.

complete under the supervision of engineer in charge. A

warranty for 10 years for the Retro reflective sheeting

from original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab for

the product offered shall be submitted by contractor. (A)

Class-C Type-11 Retro Reflective sheeting

85 1.00 Providing and Fixing Solar LED Traffic Blinker Which is 20705.00 Rupees No

Colour is Red,Yello or Amber, Working Hr-12 Twenty

HR,Diameter of Light is 300 mm and Visiblity of this Thousand

Light is 500 Mtr min and 12 feet Height and Wt is

Approx 14 to 16 KG. Etc Complete

86 1.00 Flood Cautionary Warning Sign- Providing and fixing 5995.36 Rupees Five No

sign boards made out of 2mm aluminium sheet / 3mm Thousand

ACP (Aluminum composite Panel); size 90 x 60 cms. as Nine Hundred

per design of IRC-67-2012. Pre treated with

phospheting process & acid etching; coated with one

Thirty Six Only

coat of epoxy primer and two coats of best quality

epoxy paint ;reflectorised with Micro Prismatic Grade

retro refiectivesheeting of Type-11 as per ASTM D-4956

and latest M.O.S.T.Specifications; 3.6mtr long stand

post of 75 x 75 x 6mm / 65NB Circular MS Pipe as

required and frame fabricated from suitable size iron

angle of 35 x 35 x 3mm; painted with bestquality epoxy

coatings in black and white bends. The details of

symbol foreach board shall be as per theinstruction of

engineer in charge. The fixing at site shall be in 1:2:4 CC

blockof size 45 x 45 x 60 Cms. for each leg.including

excavation, curing etc.complete under the supervision

of engineer in charge.

Quantity Discription Rate in words Per Amount Rs

87 1.00 Flood Gauge Sign :-Providing and fixing sign boards 7103.33 Rupees Seven No

made out of 1.5mm aluminium sheet / 3mm ACP Thousand One

(Aluminum composite Panel); size 150x40 cm Hundred

rectangular plate as per design of IRC-67-2012. Pre

treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats of

best quality epoxy paint ;reflectorised with Micro

Prismatic Grade retro refiectivesheeting of Type-11 as

per ASTM D-4956 and latest M.O.S.T.Specifications;

mtr long stand post of 75 x 75 x 6mm / 65NB Circular

MS Pipe as required and frame fabricated from suitable

size iron angle of 35x 35 x 3mm; painted with

bestquality epoxy coatings in black and white bends.

the details of symbol or inscription / numerals for each

board shall be as per the instruction of engineer in

charge.The fixing at site shall be in 1:2:4 CC block of

size 45 x 45 x 60 Cms. for each leg.including excavation,

curing etc.complete under the supervision of engineer

88 1.00 Supplying and fixing jumbo bollard swiss type made out 7272.00 Rupees Seven No

of 1.5 mm crc sheet , hight 188 cms bottom dia. 30 cm, Thousand Two

top dia. 18 cm. with direction plate of 45 cm dia. Hundred

Fabricated as per drawing pre treated with

phosphering process painted with epoxy coating,

reflectorised with retro reflective sheeting specified by

MORT&H latest specification and fixing in size 45cm x

45 cm x 60 cm in concrete grade 1:2:4 (1 cement :2 fine

sand :4 aggregate as specified by Engineer Incharge.

(B) High Intensity Grade.

Quantity Discription Rate in words Per Amount Rs

89 1.00 Road marking with hot applied thermoplastic paints 367.72 Rupees Three Smt

with reflectorising glass beads on bitumin surface Hundred Sixty

providing and laying a hot applied thermoplastic Seven And

compound 2.5 mm thick including reflectorising glass

beads @ 250gms per sqm area, thickness of 2.5mm is

excluding of surface applied glass beds as per IRC:35-

2015. The finished surface to be level, uniform and free

from streaks and holes. zebra patta /bump patta

lane/center line/ edge line/cut patta. The white color

marking should provide liminance coefficinet on

cemend road shalll be min 130 mcd/m2/lux and Asphalt

road shall be min 100 mcd/m2/lux during the service

life during the day time. The marking should meet the

performance criteria for night time reflectivity, wet

reflectivity and skid resistance as mentioned in the

section-15 of IRC 35-2015. Warranty for the Retro

reflectivity should be two years.

90 1.00 Cat Eye / Road Stud / RPM: Supplying of Molded Twin 326.23 Rupees Three No

Shanks Raised Pavement Markers made of Hundred

polycarbonate and ABS moulded body and reflective Twenty Six

panels with Micro prismatic lens (No Glass bead lens)

capable of providing total internal reflection of the light

entering the lens face and shall support a load of

kgs. tested in accordance to ASTM D 4280 Type H and

complying to Specifications of Category A of MORTH

Circular No RW/NH/33023/10-97 – DO III Dt 11.06.

1997. The height, width and length shall not exceed

mm, 130 mm and 130 mm and with minimum reflective

area of 13 Sqcm on each side and the slope to the base

shall be 35 +/- 5 degree. The strength of detachment of

the integrated cylindrical shanks, (of diameter not less

than 19 +/- 2 mm and height not less than 30+/- 2 mm)

from the body is to be a minimum value of 500 Kgf.

Fixing will be by drilling holes on the road for the

shanks to go inside, without nails and using epoxy resin

based adhesive as per manufacturer’s recommendation

and The color of the marker should be as per the IRC 35-

2015 and as directed by Engineer-in-charge. {SOR. It.

Code. 26162a, P. No.254}

Quantity Discription Rate in words Per Amount Rs

91 1.00 Providing and fixing pre-cast concrete kerb stone of 374.92 Rupees Three Rmt

gray cement based concrete block 30cm length,30cm Hundred

height and 15cm thick of M250 grade concret as per Seventy Four

approved design and including excavation for fixing in

proper line and level,filling the joint with C:M 1:3

(1cement:3fine sand) etc complete.

92 1.00 Providing photo graphy of any type of work at any site 70.70 Rupees No

of Road, Building & Bridges under R & B Sub Division Seventy And

Deodar including Submitting Soft copy & 2-Hard Photo Paise Seventy

Copy arrange in A4 Size Good Quality Paper as directed

by Engineer in Chage.

93 1.00 Providing Video graphy of any type of work at any site 1515.00 Rupees One K.M.

of Road, Building & Bridges under R & B Sub Division Thousand Five

Deodar including Submitting Soft copy as directed by Hundred

Engineer in Chage.

94 1.00 Providing and casting in situ ordinary cement concrete 3774.31 Rupees Three Cmt

M.150 for kerb/kerb block including formwork curing Thousand

and finishing complete. Seven

95 1.00 Providing 15cm thick stone pitching including preparing 199.94 Rupees One Smt

the laying surface in proper slope and pointing with Hundred

CM 1:3 (1 cement : 3 sand) etc complete. Ninety Nine

96 1.00 Providing and fixing pre-cast Rubber Dye / steel Dye 688.93 Rupees Six Smt

inter locking concrete block 60mm thick with grade of Hundred

concrete M300 pnumatic compressed / vibrated Eighty Eight

mechanically and as per approved design Confirming

to IS 15658 : 2006 including 35 mm Sand layer for

levelling and filling the joint with sand in proper line

per guidlines of IRC : SP 63-2018 etc. Complete.

Quantity Discription Rate in words Per Amount Rs

97 1.00 Diversion Ahead Sign :-Providing and fixing sign boards 10671.66 Rupees Ten each

made out of 2mm aluminium sheet / 4mm ACP Thousand Six

(Aluminum composite Panel); size 180x60 cms. Hundred

rectangular as per design of IRC-67-2012. Pre treated

with phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best

quality epoxy paint ;reflectorised with Micro

Prismatic Grade retro refiectivesheeting of Type-11

as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.1 mtr long stand post (2 Nos.)

of 50 x 50 x 5mm / 50NB Circular MS Pipe as required

and frame fabricated from suitable size iron angle of

35 x 35 x 3mm; painted with bestquality epoxy

coatings in black and white bends. The details of

symbol foreach board shall be as per theinstruction of

engineer in charge. The fixing at site shall be in 1:2:4 CC

blockof size 45 x 45 x 60 Cms. for each leg.including

excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for

10 years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor

exposure test report from

third party test lab for the product offered shall be

submitted by (A) Class-C Type-11 Retro Reflective

Quantity Discription Rate in words Per Amount Rs

98 1.00 Diversion Ahead Sign :-Providing and fixing sign boards 9867.07 Rupees Nine each

made out of 2mm aluminium sheet / 4mm ACP Thousand

(Aluminum composite Panel); size 180x60 cms. Eight Hundred

rectangular as per design of IRC-67-2012. Pre treated

with phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best

quality epoxy paint ; reflectorised with High

Intensity Prismatic Grade retro refiectivesheeting of

Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.1 mtr long stand post (2

Nos.) of Iron Angle 50 x 50 x 5mm / 50NB Circular

MS Pipe as required and frame fabricated from

suitable size iron angle of 35 x 35 x 3mm; painted with

bestquality epoxy coatings in black and white bends.

The details of symbol for each board shall be as per the

instruction of engineer in charge. The fixing at site shall

be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for

each leg including excavation, curing etc.complete

under the supervision of engineer in charge. A

warranty for 7 years for the Retro reflective sheeting

from original manufacturer & a certified copy of 3 year

outdoor exposure test

report from third party test lab for the product offered

shall be (B) Class-B Type-4 Retro Reflective sheeting

99 1.00 Diversion sing board :-Providing & Fixing sign boards 6798.92 Rupees Six each

made out of 2mm aluminium sheet, size 180 x 60 Thousand

cms. rectangle as per the attached drawing pre Seven

treated with phospheting process & acid etching.

coated with one coat of epoxy priemr and two coats of

best quality epoxy paint reflectorised with retro Ninety Two

reflective sheeting as per latest M.O.S.T. Only

Specifications; Letters and numerals should be as

per IRC-30-1968,3.1m long (2nos) stand post and

frame fabricated from iron angle of

35x35x3mm, 50x50x5mm painted with best quality

epoxy coatings in blak and white bends. The fixing at

site shall be in 1:2:4 CC block of size 45 x 45x 60cms for

each leg, including excavation curing etc. complete

under the supervision of engineer in charge.(A)

Quantity Discription Rate in words Per Amount Rs

100 1.00 Supplying and fixing DELINATORS (small) made out of 612.06 Rupees Six each

62.5mm dia curcular hollow section closed at top Hundred

and end height 18 cm febricated as per attached Twelve And

drawing painted with epoxy coating colour with

protective grill refletorised retroreflective sheeting as

per MORT&H latest spesification.

101 1.00 Supply of TRAFFIC CONE made out of molded fiber 459.05 Rupees Four each

rainforced plastic colour Yellow, fitted woth retro Hundred Fifty

reflective sheeting as per the attached drawing. Size Nine And

60cm, height * 32.5cm base in cone shape,

reflectorized with retro refletive sheeting as per

M.O.S.T. Specification as required by Engineer in

charged. Provided with

protective grill. High Intensity Grade.

102 1.00 Tree guard sign :-Providing & fixing sign board made 494.41 Rupees Four each

out of 2mm aluminium sheet, size 30cms diameter Hundred

circle, pretreated with phospheting process and acid Ninety Four

etching, painted with one coat of epoxy primer and

two coats of best quality epoxy paint

reflectorised with retro reflective sheeting as per latest

specifications (As per attached drawing)(A) Engineer

Grade(VR)... 26107 A

103 1.00 Tree Guard sign :-Providing & fixing sign board made 590.98 Rupees Five each

out of 2mm aluminium sheet / 3mm ACP (Aluminum Hundred

composite Panel) ,size 30cms diameter circle, Ninety And

pretreated with phospheting process and acid etching,

painted with one coat of epoxy primer and two coats of

best quality epoxy paint reflectorised with retro

reflective sheeting as per latest M.O.S.T.

specifications. A warranty for 7 years for the Retro

reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test

report from third party test lab for the product offered

shall be submitted by contractor. (B) Class-B Type-4

Retro Reflective sheeting

Quantity Discription Rate in words Per Amount Rs

104 1.00 Tree Guard sign :-Providing & fixing sign board made 531.26 Rupees Five each

out of 2mm aluminium sheet / 3mm ACP (Aluminum Hundred

composite Panel) , size 30cms diameter circle, Thirty One

pretreated with phospheting process and acid etching,

painted with one coat of epoxy primer and two coats of

best quality epoxy paint reflectorised with retro

reflective sheeting as per latest M.O.S.T.

specifications. A warranty for 10 years for the Retro

reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test

report from third party test lab for the product offered

shall be submitted by contractor. (A) Class-C Type-11

Retro Reflective sheeting

105 1.00 Place Identification Sign :-Providing and fixing sign 12341.52 Rupees Twelve each

boards made out of 2mm aluminium sheet / 4mm Thousand

ACP (Aluminum composite Panel); size 150x90 cms. Three

rectangular as per design of IRC-67-2012. Pre treated

with phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best

quality epoxy paint ; reflectorised with High

Intensity Prismatic Grade retro refiectivesheeting of

Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 4.0mtr (2 Nos.) long stand

post of Iron Angle 75 x 75 x 6mm / 65NB Circular

MS Pipe as required and frame fabricated from

suitable size iron angle of 35 x 35 x 3mm; painted with

bestquality epoxy coatings in black and white bends.

The details of symbol for each board shall be as per the

instruction of engineer in charge. The fixing at site shall

be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for

each leg including excavation, curing etc.complete

under the supervision of engineer in charge. A

warranty for 7 years for the Retro reflective sheeting

from original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab

for the product offered shall be

submitted by contractor. (B) Class-B Type-4 Retro

Reflective (SOR 26100B)

Quantity Discription Rate in words Per Amount Rs

106 1.00 Sign board per Square Meter :-Providing and fixing 7894.02 Rupees Seven smt

sign boards made out of 2mm aluminium sheet / Thousand

4mm ACP (Aluminum composite Panel); size 1 meter x Eight Hundred

1meter as per design of IRC-67- 2012. Pre treated with

phospheting process & acid etching; coated with one

coat of epoxy primer and two coats of best quality

epoxy paint ; reflectorised with High Intensity

Prismatic Grade retro refiectivesheeting of Type-4 as

per ASTM D-4956 and latest M.O.S.T.Specifications;

mtr long stand post (2 Nos.) of Iron Angle 75 x 75 x

6mm / 65NB Circular MS Pipe as required and

frame fabricated from suitable size iron angle of

50x50x5mm; painted with bestquality epoxy coatings

in black and white bends. the details of symbol or

inscription / numerals for each board shall be as per

the instruction of engineer in charge. The fixing at site

shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for

each leg including excavation, curing etc.complete

under the supervision of engineer in charge. A warranty

for 7 years for the Retro reflective sheeting from

original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test

lab for the product

offered shall be submitted by contractor. (B) Class-B

Quantity Discription Rate in words Per Amount Rs

107 1.00 Sign board per Squate Meter :-Providing and fixing sign 12310.89 Rupees Twelve smt

boards made out of 2mm aluminium sheet / 4mm ACP Thousand

(Aluminum composite Panel); size 1meter x1 meter as Three

per design of IRC-67-2012. Pre treated with

phospheting process & acidetching; coated with one

coat of epoxy primer and two coats of best quality Only

epoxy paint ;reflectorised with Micro Prismatic Grade

retro refiectivesheeting of Type-11 as per ASTM D-4956

and latest M.O.S.T.Specifications; 4 mtr long stand post

Nos.) of 75 x 75 x 6mm / 65NB Circular MS Pipe as

required and frame fabricated from suitable size iron

angle of 50 x 50 x 5mm; painted with bestquality epoxy

coatings in black and white bends. the details of symbol

or inscription / numerals for each board shall be as per

the instruction of engineer in charge.The fixing at site

shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for

each leg.including excavation, curing etc.complete

under the supervision of engineer in charge. A warranty

for 10 years for the Retro reflective sheeting from

original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab

for the product offered shall be submitted by

contractor. (A) Class-C Type-11 Retro Reflective

Quantity Discription Rate in words Per Amount Rs

108 1.00 Men at work (Heavy) sign :-Providing and fixing sign 9148.16 Rupees Nine each

boards made out of 2mm aluminium sheet / 4mm ACP Thousand One

(Aluminum composite Panel); size 120cm x 90cm as Hundred Forty

per design of IRC-67-2012. Pre treated with

phospheting process & acid etching; coated with one

coat of epoxy primer and two coats of best quality

epoxy paint ; reflectorised with High Intensity

Prismatic Grade retro refiectivesheeting of Type-4

as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6 mtr long stand post (2

Nos.) of Iron Angle 75 x 75 x 6mm / 65NB Circular

MS Pipe as required and frame fabricated from

suitable size iron angle of 50x50x5mm; painted with

bestquality epoxy coatings in black and white bends.

the details of symbol or inscription / numerals for each

board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC blockof

size 45 x 45 x 60 Cms. for each leg including

excavation, curing etc.complete under the supervision

of engineer in charge. A warranty for 7 years for the

Retro reflective sheeting from original manufacturer &

a certified copy of 3 year outdoor exposure test

report from third party test lab for the

product offered shall be submitted by contractor. (B)

Class-B Type-4 Retro Reflective sheeting

Quantity Discription Rate in words Per Amount Rs

109 1.00 Men at work (2' x 2') sign :-Providing and fixing sign 3634.85 Rupees Three each

boards made out of 1.5mm aluminium sheet / 3mm Thousand Six

ACP (Aluminum composite Panel); size 60cmx60cm as Hundred

per design of IRC-67-2012. Pre treated with

phospheting process & acid etching; coated with one

coat of epoxy primer and two coats of best Only

quality epoxy paint ; reflectorised with High

Intensity Prismatic Grade retro refiectivesheeting

of Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.3 mtr long stand post of Iron

75 x 6mm / 65NB Circular MS Pipe as required

and frame fabricated from suitable size iron angle

of 50x50x5mm; painted with bestquality epoxy

coatings in black and white bends. the details of

symbol or inscription / numerals for each board shall

be as per the instruction of engineer in charge. The

fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x

60 Cms. for each leg including excavation, curing

etc.complete under the supervision of engineer in

charge. A warranty for 7 years for the Retro reflective

sheeting from original manufacturer & a certified copy

of 3 year outdoor exposure test report from third

party test lab for the product

offered shall be submitted by contractor. (B) Class-B

Type-4 Retro Reflective sheeting

Quantity Discription Rate in words Per Amount Rs

110 1.00 Men at work (Folding) sign :-Providing and fixing sign 1461.91 Rupees One each

boards made out of 1.5mm aluminium sheet / 3mm Thousand

ACP (Aluminum composite Panel); size 60x60x60cm Four Hundred

equilateral Triangular as per design of IRC-67-2012.

Pre treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two

coats of best quality epoxy paint ; reflectorised

with High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D-4956 and

latest M.O.S.T.Specifications; 3.3 mtr long stand post of

Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe

as required and frame fabricated from suitable size

iron angle of 35x35x3mm; painted with bestquality

epoxy coatings in black and white bends. the

details of symbol or inscription / numerals for each

board shall be as per the instruction of engineer in

charge. A warranty for 7 years for the Retro

reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test

report from third party test lab for the product offered

shall be submitted by contractor. (B) Class-B Type-4

Retro Reflective sheeting

111 1.00 Danger Plate sign :-Providing & fixing sign board 590.98 Rupees Five each

made out of Hundred

1.5mm aluminium sheet /3mm ACP (aluminum Ninety And

Composite Panel), size 30cms diameter circle,

pretreated with phospheting process and acid etching,

painted with one coat of epoxy primer and two coats of

best quality epoxy paint reflectorised with retro

reflective sheeting as per latest M.O.S.T.

specifications. A warranty for 7 years for the Retro

reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test

report from third party test lab for the product offered

shall be submitted by contractor. (A) Class-B Type-4

Retro Reflective sheeting

Quantity Discription Rate in words Per Amount Rs

112 1.00 Railway crossing sign :-Providing and fixing sign boards 5346.11 Rupees Five each

made out of 2mm aluminium sheet / 4mm ACP Thousand

(Aluminum composite Panel); size 90 x 90 x 90 cms. Three

equilateral triangle plus 90x30cm additonal plate as

per design of IRC-67-2012. Pre treated with

phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best

quality epoxy paint ; reflectorised with High

Intensity Prismatic Grade retro refiectivesheeting

of Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6mtr long stand post of Iron

75 x 6mm / 65NB Circular MS Pipe as required

and frame fabricated from suitable size iron angle of

35 x 35 x 3mm; painted with bestquality epoxy

coatings in black and white bends. The details of

symbol for each board shall be as per the instruction of

engineer in charge. The fixing at site shall be in 1:2:4 CC

blockof size 45 x 45 x 60 Cms. for each leg including

excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for

years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor

report from third party test lab for the product offered

shall be B) Class-B Type-4 Retro Reflective sheeting

Quantity Discription Rate in words Per Amount Rs

113 1.00 Around the Island / Road Direction Sign (Big) :- 9585.24 Rupees Nine each

Providing and fixing sign boards made out of 2mm Thousand Five

aluminium sheet / 4mm ACP (Aluminum composite Hundred

Panel); size 180x60 cms. as per design of IRC-67-

2012. Pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and Only

two coats of best quality epoxy paint ; reflectorised

with High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D-4956 and

latest M.O.S.T.Specifications; 3.3 mtr long stand post of

Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe

as required and frame fabricated from suitable size

iron angle of 35 x 35 x 3mm; painted with bestquality

epoxy coatings in black and white bends. The

details of symbol for each board shall be as per the

instruction of engineer in charge. The fixing at site shall

be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for

each leg including excavation, curing etc.complete

under the supervision of engineer in charge. A

warranty for 7 years for the Retro reflective sheeting

from original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab

for the product offered shall be

submitted by contractor. (B) Class-B Type-4 Retro

Quantity Discription Rate in words Per Amount Rs

114 1.00 Around the Island / Road Direction Sign (Small) :- 3585.10 Rupees Three each

Providing and fixing sign boards made out of Thousand Five

1.5mm aluminium sheet / 3mm ACP (Aluminum Hundred

composite Panel); size 60x60 cms. as per design of IRC-

67-2012. Pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and

two coats of best quality epoxy paint ; reflectorised

with High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D-4956 and

latest M.O.S.T.Specifications; 3.3 mtr long stand post of

Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe

as required and frame fabricated from suitable size

iron angle of 35 x 35 x 3mm; painted with bestquality

epoxy coatings in black and white bends. The

details of symbol for each board shall be as per the

instruction of engineer in charge. The fixing at site shall

be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for

each leg including excavation, curing etc.complete

under the supervision of engineer in charge. A

warranty for 7 years for the Retro reflective sheeting

from original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab

for the product offered shall be

submitted by contractor. (B) Class-B Type-4 Retro

115 1.00 Providing and fixing retro Reflective Prismatic grade 12310.89 Rupees Twelve smt

Board using 2mm Aluminum / 4mm ACP, angle iron 75 Thousand

x 75 x 6mm. Descaling and degreasing the board as per Three

requirement using epoxyprimer epoxy paint and

carrying retro reflactive process by screen painting

as directed etc. complete including transporting and Only

fixing in C.C. 1:2:4 with necessary excavation curing etc.

complete as per I.R.C 67-2012 design. A warranty for

years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the

product offered shall be submitted by contractor. (A)

Class -C Type-11 retro reflective sheeting

Quantity Discription Rate in words Per Amount Rs

116 1.00 Men at work (Heavy) sign :-Providing and fixing sign 12211.91 Rupees Twelve each

boards made out of 2mm aluminium sheet / 4mm ACP Thousand Two

(Aluminum composite Panel); size 120cm x90cm Hundred

rectangular as per design of IRC-67- 2012. Pre

treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats of

best quality epoxy paint ;reflectorised with Micro

Prismatic Grade retro refiectivesheeting of Type-11

as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6 mtr long stand post (2 Nos.)

of 75 x 75 x 6mm / 65NB Circular MS Pipe as required

and frame fabricated from suitable size iron angle of

50 x 50 x 5mm; painted with bestquality epoxy

coatings in black and white bends. the details of

symbol or inscription / numerals for each board shall

be as per the instruction of engineer in charge.The

fixing at site shall be in 1:2:4 CC blockof size 45 x

x 60 Cms. for each leg.including excavation, curing

etc.complete under the supervision of engineer in

charge. A warranty for 10 years for the Retro reflective

sheeting from original manufacturer & a certified copy

of 3 year outdoor exposure test report from third

party test lab for the product

offered shall be submitted by contractor. (A) Class-C

Quantity Discription Rate in words Per Amount Rs

117 1.00 Men at work (2' x 2') sign :-Providing and fixing sign 4962.13 Rupees Four each

boards made out of 1.5mm aluminium sheet / 3mm Thousand

ACP (Aluminum composite Panel); size 60cm x 60cm Nine Hundred

square as per design of IRC-67-2012. Pre treated with

phospheting process & acid etching; coated with one

coat of epoxy primer and two coats of best quality

;reflectorised with Micro Prismatic Grade retro

refiectivesheeting of Type-11 as per ASTM D-4956 and

latest M.O.S.T.Specifications;

3.3 mtr long stand post of 75 x 75 x 6mm / 65NB

Circular MS Pipe as required and frame fabricated from

suitable size iron angle of 50 x 50 x 5mm; painted with

bestquality epoxy coatings in black and white bends.

the details of symbol or inscription / numerals for each

board shall be as per the instruction of engineer

in charge.The fixing at site shall be in 1:2:4 CC blockof

size 45 x 45 x 60 Cms. for each leg.including

excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for

10 years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the

product offered shall be submitted by

contractor. (A) Class-C Type-11 Retro Reflective

Quantity Discription Rate in words Per Amount Rs

118 1.00 Men at work (Folding ) sign :-Providing and fixing 3507.73 Rupees Three each

sign boards made out of 1.5mm aluminium sheet / Thousand Five

3mm ACP (Aluminum composite Panel); size 60x60 x Hundred

60cm equilaternal triangular as per design of IRC-67-

2012. Pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and two

coats of best quality epoxy paint ;reflectorised with

Micro Prismatic Grade retro refiectivesheeting of Type-

11 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.3 mtr long stand post of 75 x

75 x 6mm / 65NB Circular MS Pipe as required and

frame fabricated from suitable size iron angle of

x 35 x 3mm; painted with bestquality epoxy coatings

in black and white bends. the details of symbol or

inscription / numerals for each board shall be as per

the instruction of engineer in charge. A warranty for

years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the

product offered shall be submitted by contractor.

(A) Class-C Type-11 Retro Reflective sheeting

{SOR Pg. 223 it no 26106 C}

119 1.00 Danger Plate :-Providing & fixing sign board made out 531.26 Rupees Five each

of 1.5mm aluminium sheet /3mm ACP (aluminum Hundred

Composite Panel), size 30cms diameter circle, Thirty One

pretreated with phospheting process and acid etching,

painted with one coat of epoxy primer and two coats of

best quality epoxy paint reflectorised with retro

reflective sheeting as per latest M.O.S.T.

specifications. A warranty for 10 years for the Retro

reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test

report from third party test lab for the product offered

shall be submitted by contractor. (A) Class-C Type-11

Retro Reflective sheeting

Quantity Discription Rate in words Per Amount Rs

120 1.00 Railway crossing sign :-Providing and fixing sign boards 7076.06 Rupees Seven each

made out of 2mm aluminium sheet / 4mm ACP Thousand

(Aluminum composite Panel); size 90 x 90 x 90 cms. Seventy Six

equilateral triangle plus 90x30cm additional plate as

per design of IRC-67-2012. Pre treated with

phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best

quality epoxy paint

;reflectorised with Micro Prismatic Grade retro

refiectivesheeting of Type-11 as per ASTM D-4956 and

latest M.O.S.T.Specifications;

3.6mtr long stand post of 75 x 75 x 6mm / 65NB

Circular MS Pipe as required and frame fabricated from

suitable size iron angle of 35 x 35 x 3mm; painted with

bestquality epoxy coatings in black and white bends.

The details of symbol foreach board shall be as per

theinstruction of engineer in charge. The fixing at site

shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for

each leg.including excavation, curing etc.complete

under the supervision of engineer in charge. A warranty

for 10 years for the Retro reflective sheeting from

original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test

lab for the product

offered shall be submitted by contractor. (A) Class-C

Quantity Discription Rate in words Per Amount Rs

121 1.00 Around the Island / road Direction Sign board (Big) :- 8272.91 Rupees Eight each

Providing and fixing sign boards made out of 2mm Thousand Two

aluminium sheet / 4mm ACP (Aluminum composite Hundred

Panel); size 180x60 cms. as per design of IRC-67-

2012. Pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and Only

two coats of best quality epoxy paint ;reflectorised

with Micro Prismatic Grade retro refiectivesheeting of

Type-11 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.3 mtr long stand post of 75 x

75 x 6mm / 65NB Circular MS Pipe as required and

frame fabricated from suitable size iron angle of 35 x

35 x 3mm; painted with bestquality epoxy coatings in

black and white bends. The details of symbol for each

board shall be as per theinstruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC blockof

size 45 x 45 x 60 Cms. for each leg.including

excavation, curing etc.complete under the supervision

of engineer in charge. A warranty for 10 years for the

Retro reflective sheeting from original manufacturer &

a certified copy of 3 year outdoor exposure test report

from third party test lab for the product offered shall

be submitted by contractor. (A)

Class-C Type-11 Retro Reflective sheeting

Quantity Discription Rate in words Per Amount Rs

122 1.00 Around the Island / road Direction Sign board (Small) :- 5102.52 Rupees Five each

Providing and fixing sign boards made out of Thousand One

1.5mm aluminium sheet / 3mm ACP (Aluminum Hundred Two

And Paise Fifty

composite Panel); size 60x60 cms. as per design of

IRC-67-2012. Pre treated with phospheting process

& acid etching; coated with one coat of epoxy primer

and two coats of best quality epoxy paint

;reflectorised with Micro Prismatic Grade retro

reflectivesheeting of Type-11 as per ASTM D-4956 and

latest M.O.S.T.Specifications; 3.3 mtr long stand post of

75 x 75 x 6mm / 65NB Circular MS Pipe as required and

frame fabricated from suitable size iron angle of

x 35 x 3mm; painted with bestquality epoxy coatings

in black and white bends. The details of symbol foreach

board shall be as per theinstruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC blockof

size 45 x 45 x 60 Cms. for each leg.including

excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for

10 years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the

product offered shall be submitted by

contractor. (A) Class-C Type-11 Retro Reflective

123 1.00 Flood Guage Sign: Providing and fixing boards made 5143.34 Rupees Five each

out of 3 mm alluminium composite sheet size 150 X 40 Thousand One

cms. Rectangle as per design of IRC, 3.1 mt long stand Hundred Forty

post and frame fabricated from suitable size iron of

X 35 X 3 mm, 75 X 75 X 6 mm as requried, painted with

best quility epoxy coating in black and white bends.

The detail of symbol for each bord shall be as per

instruction of engineer in charge, the fixing as site shall

be in 1 : 2 : 4 CC block of size 45*45*60 cms for each

leg including curing etc completed.

124 1.00 Supplying & fixing jumbo bollard sign L- type made out 5304.52 Rupees Five each

of 1.5 mm. thick C.R.C. sheet height 155 cm. bottom Thousand

dia. 30 cm. top dia. 18 cm. fabricated as per Three

attached drawing pre treated with phospheting

And Paise Fifty

process painted with epoxy coatings reflectorised

with sheetings specified by MORT & H latest

specification (

Engineer grade )

Quantity Discription Rate in words Per Amount Rs

125 1.00 Road Delineators (Supplying and installation of 1047.37 Rupees One each

delineators (road way indicators, hazard markers, Thousand

object markers), 80-100 cm high above ground level, Forty Seven

painted black and white in 15 cm wide stripes, fitted

with 80 x 100 mm rectangular or 75 mm dia

circular reflectorised panels at the top, buried or

pressed into the ground and confirming toIRC-79 and

126 1.00 Supplying and fixing cat eye (Stimsonite) made out 375.72 Rupees Three each

from Acrilo beautile sterine injuction high compressed Hundred

molding with reflector made of MMC (prismatic type Seventy Five

of size 12cm x 6cm x 2.5cm) provided with

bituminous adhesive 100g. with each unit for fixing.

(High Intensity grade)

127 1.00 Cat Eye / Road Stud / RPM: Supplying Raised Pavement 217.40 Rupees Two each

Markers made of polycarbonate and ABS moulded Hundred

body and reflective panels with Micro prismatic lens Seventeen

(No Glass bead lens) capable of providing total

internal reflection of the light entering the lens

face and shall support a load of 13635 kgs. tested in

accordance to ASTM D 4280 Type H and complying to

Specifications of Category A of MORTH Circular No

RW/NH/33023/10-97 Ð DO III Dt 11.06.

1997. The height, width and length shall not exceed

mm, 130 mm and 130 mm and with minimum

reflective area of 13 Sqcm on each side and the slope

to the base shall be 35 +/- 5 degree. The body of the

marker should having finger grip for easy and accurate

placement and application with epoxy / bituminous

Adhesive as recommended by the manufacturer of

the marker. The color of the marker should be as per

the IRC 35-2015 and as directed by Engineer-in-charge.

128 1.00 Construction of precast RCC railing of M30 Grade, 2127.10 Rupees Two rmt

aggregate size not exceeding 12 mm, true to line and Thousand One

grade, tolurence of vertical RCC post not to exceed 1 in Hundred

500, centre to centre spacing between vertical post

not to exceed 2000 mm, leaving adequate space

between vertical post for expansion, complete as

drawings and technical specifications

Quantity Discription Rate in words Per Amount Rs

129 1.00 Construction of RCC railing of M30 Grade insitu 2077.90 Rupees Two rmt

with 20 mm nominal size aggregate, true to line Thousand

and grade, tolurence of vertical RCC post not to Seventy Seven

exceed 1 in 500, centre to centre spacing between

vertical post not to exceed 2000 mm, leaving adequate

space between vertical post for expansion,

complete as per

approved drawings and technical specifications.

130 1.00 Providing, fitting and fixing mild steel railing 3191.89 Rupees Three rmt

complete as per drawing and Technical Specification Thousand One

131 1.00 Supplying of solar road stud (Solar k tie) construction 1709.69 Rupees One rmt

aluminium alloy steel 100 dc water proof design Thousand

conform to IP67 Dimension 140 mm x 128mm x 82mm Seven

+ 1mm height of shank + 54mm +0.5 mm diameter of

shank 42.5 mm + 0.5 mm plastic unbreakable,

scratch, resistant poly carbonate for maintenance free Only

operation solar panel high efficiency mono-

crystalline 3v/50 mAh Battery XTSRS.01. XTSRS.02.

Super capacitor 2.7 v/22 of Six super bright LED with

18000 mod view distance up to 800 meters flash

rate 1H2 according to customers requirement resist

compression can take the load of 25 tons vehicle color

red and yellow working time 80 to 100 hours

continuously after the battery is fully charged and

complete fixing will be drilling holes on the road for the

shank to go inside with out nails and using epoxy resin

based adhesive per manufactures recommendation and

complete as directed by the

132 1.00 Excavation for foundation upto 1.5 M. depth including 122.94 Rupees One Cmt

sorting out and stacking of useful materials and Hundred

disposing of excavated stuff up to 50M. lead. (A) Loose Twenty Two

133 1.00 Excavation for foundation for depth from 1.5 m to 3.0 136.30 Rupees One Cmt

m including sorting out and stacking of useful materials Hundred

and disposing off the excavated stuff upto 50 Meter Thirty Six And

lead.(A) Loose or soft soil

Quantity Discription Rate in words Per Amount Rs

134 1.00 Providing and laying cement concrete 1:4:8 (1 Cement : 2653.42 Rupees Two Cmt

4 coarse sand : 8 B.T.Crushed Stone aggregates 40 mm. Thousand Six

nominal size) and curing complete excluding cost of Hundred Fifty

from work in : (a) Foundation and plinth

135 1.00 Providing and casting in situ ordinary cement concrete 3470.11 Rupees Three Cmt

M. 100 mix and providing necessary pin headers Thousand

including shuttering scaffolding laying vibrating curing Four Hundred

and finishing complete. Without V-Grooves. (A) Height

from 0.0 M to 5.0. M

136 1.00 Providing and casting in situ ordinary cement concrete 3926.83 Rupees Three Cmt

M.150 mix and providing necessary pin headers Thousand

including shuttering scaffolding laying vibrating curing Nine Hundred

and finishing complete. Without V-Grooves. (A) Height

from 0.0 M to 5.0. M

137 1.00 Providing and casting in situ ordinary cement concrete 4205.43 Rupees Four Cmt

M-200 for average 75 mm thick wearing coat laid as Thousand Two

directed including tamping ,vibrating, finishing, curing Hundred Five

and filling in joints with bitumen

138 1.00 Providing TMT Bar FE 500D reinforcement for R.C.C. 77.29 Rupees Kg

work including bending, binding and placing in position Seventy Seven

complete upto floor two level And Paise

139 1.00 Supplying and fixing reinforced concrete heavy duty 0.00 Rupees Nil

non-pressure pipes with collars for culverts including

setting and joining the pipes in C.M. 1:2 watering and

laying (To level of slops of I.S. 458 / 1971 Class NP3

casted by vertically vibrated technology of following

internal diameter.

1.00 (i) 300 mm dia. 1095.18 Rupees One Rmt

1.00 (ii) 450 mm dia. 1462.01 Rupees One Rmt

1.00 (iii) 600 mm dia. 2108.86 Rupees Two Rmt

Eighty Six Only

Quantity Discription Rate in words Per Amount Rs

1.00 (iv) 900 mm dia. 3271.56 Rupees Three Rmt

And Paise Fifty

1.00 (v) 1200 mm dia. 5516.63 Rupees Five Rmt

140 1.00 Filling in plinth with sand under floors 444.75 Rupees Four Cmt

including watering ramming, consolidating Hundred Forty

and dressing complete Four And

141 1.00 Filling available excavated earth (excluding rock) in 136.92 Rupees One Cmt

trenches. plinth, sides of foundations etc. in layers not Hundred

exceeding 20 cm. in depth consolidating each Thirty Six And

disposited layer by ramming and watering.

142 1.00 Providing and filling rubbles including hand packing 1046.27 Rupees One Cmt

and filling interstices with quarry spalls behind Thousand

abutments and between returns as directed. Forty Six And

143 1.00 Providing and laying - Fitter Media 600mm thick 1239.35 Rupees One Cmt

directed at the back of abutments, returns and wing Thousand Two

walls as per detailed specifications. Hundred

144 1.00 Demolition and disposal of unserviceable materials 623.02 Rupees Six Cmt

with all lead and lift. (ii) Unreinforced cement concrete Hundred

145 1.00 Demolition including stacking of serviceable materials 1082.35 Rupees One Cmt

and disposal of unserviceable materials with all lead Thousand

and lift. (i) R.C.C. work Eighty Two

146 1.00 Removing and scraping of old deteriorated plaster of 19.89 Rupees Smt

any thickness fromm wall / R.C.C member including Nineteen And

stacking of serviceable material and disposal of Paise Eighty

unserviceable from site of work with all lead and lift

Quantity Discription Rate in words Per Amount Rs

147 1.00 Providing 20mm thick cement plaster in single coat on 208.79 Rupees Two Smt

single or half brick walls for interior plastering upto Hundred Eight

floor two level and finished even and smooth in (ii) And Paise

Cement mortar 1:4 (1-cement :4-sand)

148 1.00 Excavation for foundation upto 1.5 m depth including 157.16 Rupees One Cmt

sorting out and stacking of useful materials and Hundred Fifty

disposing off the excavated stuff upto 50 Meter Seven And

lead.(B)Dense or Hard soil (SOR 04001B)

149 1.00 Excavation for foundation for depth from 1.5 m to 3.0 170.50 Rupees One Cmt

m including sorting out and stacking of useful materials Hundred

and disposing off the excavated stuff upto 50 Meter Seventy And

lead.(B) Dense or Hard soil (SOR 04002B)

150 1.00 Divesion of water course ,Providing coffedam and bund 25757.53 Rupees Nos.

or island as may be necessary for foundation and Twenty Five

maintaining the same for the period as amay be Thousand

necessary (F) Abutment Left (Including

returns/ wing walls)

151 1.00 Providing flood gauge marks on substructure as per 161.68 Rupees One Sq.mt.

design including painting complete. Hundred Sixty

152 1.00 Providing Masonary Steps with Cement Pointing on 234.67 Rupees Two Steps

approaches as directed. Hundred

153 1.00 Scaffolding :- Providing erecting and dismentling safe H 227.43 Rupees Two Sq.mt.

frame and Hundred

/ pipe scaffolding including working platform for Twenty Seven

external area of bridge pier to facilitate all works etc.

completed, Measurement for payment shall be

considered as per detailed specification, (Property

of contractor and repetation will be paid per pier)

(Every 1.M extra height increse rate by 50 rupees /

meter) (A) Rate up to

Quantity Discription Rate in words Per Amount Rs

154 1.00 Portable Barricade in Construction Zone Installation 3218.87 Rupees Three Each

of a steel portable barricade with horizontal rail Thousand Two

300 mm wide, 2.5 m in length fitted on a 'A' frame Hundred

made with 45 x 45 x 5 mm angle iron section, 1.5 m

in height, horizontal rail painted (2 coats) with

yellow and white stripes, 150 mm in width at an angle

of 450, 'A' frame painted with 2 coats of yellow

paint, complete as per

IRC:SP:55-2001 (NH SOR It.8.43)

155 1.00 Repair of Crash Barrier Repair of concrete crash 194.93 Rupees One Rmt.

barrier with cement concert of M-30 grade by Hundred

cutting and trimming the damaged portion to a Ninety Four

regular shape, cleaning the area to be repaired

thoroughly, applying cement concert after erection

proper form work.

156 1.00 Repair of RCC Railing Carrying out repair of RCC 118.17 Rupees One Rmt.

M30 railing to bring it to the original shape. Hundred

157 1.00 Repair of Steel Railing (Repair of steel railing to 298.96 Rupees Two Rmt.

bring it to the original shape) Hundred

158 1.00 Providing parapet of controlled cement concrete M- 1156.58 Rupees One Rmt.

150 as per detailed detailed drawings with Thousand One

necessary reainforcement including, shuttering, Hundred Fifty

laying vibrating and finishing to line and level

complete. (ii) Cast in situ. (27095b2a)

159 1.00 Removal of existing asphaltic wearing coat comprising 124.08 Rupees One Sq.mt.

of 50 mm thick asphaltic concert laid over 12 mm Hundred

thick mastic asphalt including disposal with all lift and Twenty Four

lead upto 1000 m. (NH SOR 17.2)

Quantity Discription Rate in words Per Amount Rs

160 1.00 Dismentling the existing Expansion Joint by 17230.83 Rupees Rmt.

Pneumatic Breaker without damaging to the existing Seventeen

reinforcement and removal by cutting with Gas Cutter Thousand Two

and Breaking of Concreteup to 0.5 m on both side of

joint by Mechanical means including Disposal of

Malba/debris and Fixing of New Strip Seal Expansion Three Only

Joint as per drawing inclduing necessary welding,

rabaring fixing of Shuttering & centering and providing,

laying, mixing, vibrating, cutting and roughening the

surface of reinforced cement concrete (With

ordinary Portland cement @ 500 Kg./M ^3) of

grade : 53 to required levels and shape at all

heights and depth using 20mm max to 6mm size

graded aggregate as specified and directed in repair

of expansion joints etc. with Ready Mixed

(Automatic bathmix Plant) of M-50 grade (25 Mpa

minimum 1 day) repid Hardening type concrete

and self-flowable properties with minumum flow

of 450mm at the time of pouring with bonding

coat between old and new concete curing

complete as pe the

direction of the Engineer in Charge.

161 1.00 Providing Pre-moulded asphalt filler joints as per 703.53 Rupees Seven Sq.mt.

drawings.(A) 12mm Hundred

162 1.00 Providing and fixing in position fully moulded 0.90 Rupees And Cu.cmt.

restrained elastometric Bearings as per detailed Paise Ninety

163 1.00 Providing and fixing cast steel roller rocker bearings 230.87 Rupees Two Tonne

as per detailed drawings. Hundred Capacit

164 1.00 Providing and fixing Mild steel roller rocker 360.90 Rupees Three Tonne

bearings as per detailed drawings. Hundred Sixty Capacit

Quantity Discription Rate in words Per Amount Rs

165 1.00 Removal of defective concrete, cleaning the surface 594.79 Rupees Five Sq.mt.

thoroughly, applying the shotcrete mixture Hundred

mechanically with compressed air under pressure, Ninety Four

comprising of cement, sand, coarse aggregates,

water and quick setting compound in the proportion as

per clause 2807.1., sand and coarse aggregates

conforming to IS: 383 and table 1 of IS:

respectively, water cement ratio ranging from

0.35 to 0.50, density of gunite not less than

kg/cum, strength not less than 25 Mpa and

workmanship conforming to clause

166 1.00 Guniting concrete surface with cement mortar 775.68 Rupees Seven Sq.mt.

applied with compressor after cleaning surface Hundred

and spraying with epoxy complete as per Technical Seventy Five

167 1.00 Sealing of crack / porous concrete with Epoxy Grout by 794.87 Rupees Seven Kg.

injection through nipples complete as per clause Hundred

2803.1. Ninety Four

168 1.00 Eproxy bonding of new concrete to old concrete (NH 529.24 Rupees Five Sq.mt.

169 1.00 Applying epoxy mortar over leached, honey combed 436.32 Rupees Four Sq.mt.

and spalled concrete surface and exposed steel Hundred

reinforcement complete as per Technical Specification Thirty Six And

170 1.00 Providing and inserting nipples with approved fixing 502.98 Rupees Five Each

compound after drilling holes for grouting as per Hundred Two

Technical Specifications including subsequent And Paise

cutting/removal and sealing of the hole as necessary

of nipples after completion of grouting with

171 1.00 Sealing of cracks/porous concrete by injection 0.00 Rupees Nil

process through

nipples/Grouting complete as per Technical

172 1.00 (A) Cement Grout 82.82 Rupees Eighty Kg.

Quantity Discription Rate in words Per Amount Rs

173 1.00 (B) Cement Mortar (1:1) Grouting 149.48 Rupees One Kg.

174 1.00 Providing and placing in position FE 500D TMT bar 74728.50 Rupees MT

reinforcement including cutting, bending, hooking, Seventy Four

and tying complete as per detailed drawing.(C) Thousand

Balanced cantilever box type supersturcture.(I)

Deck slab (II) Webs,Bottom slabs and

Diaphragms And Paise Fifty

175 1.00 Steel work, welded in built up sections framed 9108.48 Rupees Nine Qtl

work including cutting, hoisting, fixing in position and Thousand One

applying a priming coat of red lead paint. (A)In beams Hundred Eight

and joists, channels angles Tees, flats, with connecting

plates or angle cleats as in main and cross beams. Hip

and jack rafters, purlins conneted to common rafters

176 1.00 Shuttering, Providing, erecting and removing proper, 899.64 Rupees Eight Sq.mt.

safe and leak proof shuttering using plywood, steel Hundred

plate to facilitate any type of concrete repair work etc Ninety Nine

as directed by Engineer in charge.

177 1.00 Providing and casting in situ controlled cement 5052.03 Rupees Five Cu.mt.

concrete M-200 for R.C.C. return as per drawings Thousand Fifty

including centering shuttering, scaffolding where Two And Paise

necessary, laying vibrating, curing and finishing

complete.(A) Height from 0.0 to 5.0 M. (1) Piers (2)

178 1.00 Provding and laying precast R.C.C foothpath slab in 1100.81 Rupees One Sq .mt

controlled cement concrete of M-200 grade (7.0Cm. Thousand One

thickness including necessary reinforcement and Hundred And

providing and setting cement chequerd tiles in

C.M. 1:5 as per drawing including necessary

formwork, curing and finishing complete.

179 1.00 Providing and laying - Fitter Media 600mm thick 1239.35 Rupees One Sq.mt.

directed at the back of abutments, returns and wing Thousand Two

walls as per detailed specifications. Hundred

Quantity Discription Rate in words Per Amount Rs

180 1.00 Supply of Readymade Bitumenous Cold Mix Pothole 25418.77 Rupees MT

Patching Material for B.T. Surface patch using Twenty Five

Medium curing Cut-back Bitumen MC-800 At the rate Thousand

of 5.6% of Total Mix and it shall be conforming to IS L

2017 specification, including heating the material as

specified in section 4 and materials stacked at site of Seven Only

work by contractor's own dumper as and where

directed within

K.M. Lead inciduing providing all materials

equipment T&P Oil kerosene. labour charges including

Labour charges for Patch work by Conventiona!

method including cleaning the patch, filling potholes

by readumade bitumenous Consolidation by Tempering

181 1.00 Provide Traffic Management periphery of work in 19089.35 Rupees Day

progress for 24x7 including all required safety boards, Nineteen

Sinages & person as per requirement & Instruction of Thousand

Engineer in charge.

182 1.00 Providing and Supplying ready to use free flow, non 714.00 Rupees Seven Bag

shrink, high strength Micro Concrete material having Hundred

3 days compressive strength not less than M35 at site. Fourteen Only

183 1.00 Applying pre-packed cement based polymer mortar of 227.25 Rupees Two Sqm

strength 45 Mpa at 28 days for replacement of spalled Hundred

concrete Twenty Seven

184 1.00 Replacement of bearings complete as per Technical 17794.18 Rupees Each

specification as instruction Seventeen

185 1.00 Rectification of bearings as per Technical specifications 6375.12 Rupees Six Each

Quantity Discription Rate in words Per Amount Rs

186 1.00 Replacement of Expansion Joints complete as per 2733.06 Rupees Two Mtr

drawings Thousand

187 1.00 Replacement of damaged concrete railing. 372.24 Rupees Three Mtr

188 1.00 Replacement of crash barrier 649.43 Rupees Six Mtr

189 1.00 Replacement of damaged mild steel railing 313.10 Rupees Three Mtr

190 1.00 Brick work using common burnt clay building 4214.33 Rupees Four Cmt

bricks having crushing strength not less than 35 Thousand Two

kg./Sq.Cm. in foundation and plinth in Cement Hundred

Mortar 1:6 (1- Cement : 6 -fine sand)(B)

191 1.00 Demolition of Brick work and stone masonry including 562.89 Rupees Five Cmt

stacking of serviceable materilas and disposal of Hundred Sixty

unserviceable materials with all lead and lift.(ii) In Two And Paise

192 1.00 Milling of Existing Bituminious surface 50 mm 81.00 Rupees Eighty Smt

depth including stacking useful materials on road side One Only

and disposing off remaining stuff.

193 Hire charges for Engaging various Machinery on Road Rupees Nil

Site as and where required including Diesel, lubricant,

driver etc.as directed by Engineer in Charge.

1.00 (A) Dumper { Hydrolic} 1162.00 Rupees One Hrs.

1.00 (B) Truck 1162.00 Rupees One Hrs.

1.00 (C) J.C.B. Machine 1250.00 Rupees One Hrs.

Quantity Discription Rate in words Per Amount Rs

1.00 (D) Tendon Road Roller 1278.00 Rupees One Hrs.

1.00 (E) 8 to 10 tonne Vibrator static Roller 2091.00 Rupees Two Hrs.

1.00 (F) Tractor with Trolly 581.00 Rupees Five Hrs.

1.00 (G) Tractor with Pavda 524.00 Rupees Five Hrs.

1.00 (H) Tractor with Broomer 814.00 Rupees Eight Hrs.

1.00 (I) Tractor with Tranker 872.00 Rupees Eight Trip

1.00 (J) Hydra 2731.00 Rupees Two Hrs.

1.00 (K) Crane Machine 834.00 Rupees Eight Hrs.

1.00 (L) Hitachi Pockland Machine 2672.00 Rupees Two Hrs.

1.00 (M) Motor Grader 1561.00 Rupees One Hrs.

1.00 (N) Generator Set 1278.00 Rupees One Hrs.

194 1.00 Vibratory soil compactor (10 tonnes) 2424.00 Rupees Two Hrs.

Quantity Discription Rate in words Per Amount Rs

195 1.00 Air compressor -250 cfm 606.00 Rupees Six Hrs.

196 1.00 Hire of 76 HP Loader machine for cleaning road site by 707.00 Rupees Seven Hrs.

removing of ganda bavals, akadas, bordies etc. Hundred

including making earth work on road side shoulder Seven Only

including filling raincut etc. complete also all type of

work can done by loader part of machine as directed at

work siteincluding Machine Operators, fuel,

maintainance and all taxes.

197 1.00 Cleaning of Road Surface including engaging Labour/ 4.52 Rupees Four Smt

Tractor/Trolly/Pavada as required and throwing the And Paise Fifty

stuff within all lead and lift as directed by engineer in Two Only

198 1.00 Clearing and grubbing the road side shoulders (both 16343.82 Rupees Hect.

side in 2.0 mtr. width) including uprooting rank, Sixteen

vegetation grass bushes, shrubs, sapling and tree girth Thousand

upto 300mm , by using Tractor mounted Fodder

Reaper (Mover) of 6' Long cutting blade. Removal of

stumps of trees cut earlier, disposal of unserviceable Paise Eighty

material, guide the traffic with required warning Two Only

sigs by using of labour with safety jacket and

equipments etc. complete as directed by Engineer in

199 1.00 Applying White Wash and Geru to trees in three coats 9608.13 Rupees Nine K.M.

as and where directed incl. all cost of materials and Thousand Six

labour charges in the work etc.complete as directed. Hundred Eight

200 1.00 Providing oil paint colour to Center verge (Kerb) by 166.04 Rupees One Smt

Yellow and Black patta (Three Coat) one coat of priming Hundred Sixty

& two coat of oil Paint including cost of material Six And Paise

required for paint and all labour work etc complete as

201 1.00 Painting lines, deashes, arrows, letters etc on roads, Air 129.61 Rupees One Smt

fields and like in two coats with road marking paint, Hundred

brushing including cleaning the surface of all dirt, dust Twenty Nine

and other foreign matter. (i) Over 10cm in width

202 Painting and lettering with enamel paint 3-coats etc Rupees Nil

a 1.00 (i) Ordinary K.M. Stone for N.H. S.H. and M.D.R. 205.29 Rupees Two No

Quantity Discription Rate in words Per Amount Rs

b 1.00 (ii) Ordinary K.M. Stone for O.D.R. and V.R. 158.37 Rupees One No

c 1.00 (iii) Fifth K.M. Stone . 392.99 Rupees Three No

d 1.00 (iv) Hectometer stone. 52.79 Rupees Fifty No

e 1.00 (v)Junction board. 1466.40 Rupees One No

203 1.00 Numbering the C.D. work with approved 58.80 Rupees Fifty Each

paint including all materials for painting Eight And

etc. complete. Paise Eighty

204 1.00 White washing with lime on Head wall / Parapet etc of 18.55 Rupees Smt

RCC wall surface (three coats) to give an even shade Eighteen And

including thoroughly booming the surface to remove all Paise Fifty Five

dirt, dust; mortar drops and other foreign matter.

205 1.00 Carrying out Traffic Census Survey work as continious 3 - 18483.00 Rupees No

Day & Night shift using Skill Person with all material on Eighteen

Various count post of Various Road under R & B Sub Thousand

Division Deodar including Preparing & Submitting

Traffic PCU data report etc in 2 hard Copies as directed

by Engineer in Chage.

206 Opening all size pipe of CD works for pipe monsoon

treatment including removing the jungle up to 15 mt on

boths sides U/S & D/S of CD work by JCB machine

providing the gutter on boths side up to 10 mt opening

the pipes by labour & opening the water way etc

a 1.00 1 Row CD work Cleaning 2241.19 Rupees Two No

Quantity Discription Rate in words Per Amount Rs

b 1.00 2 Row CD work Cleaning 2947.18 Rupees Two No

c 1.00 3 Row CD work Cleaning 3654.18 Rupees Three No

d 1.00 4 Row CD work Cleaning 4361.18 Rupees Four No

e 1.00 5 Row CD work Cleaning 5067.17 Rupees Five No

f 1.00 6 Row CD work Cleaning 5774.17 Rupees Five No

207 1.00 Opening all size Box Culvert works for monsoon

treatment including removing the jungle up to 50 mt on

boths sides U/S & D/S of Box Culvert / by JCB

machine,Removing unncesesarry soil, grass, Vegitation

etc cleaning and disposing incluidng all labour and

machinery etc complete of Box Cell as per direction and

instruction of engineer incharge.

a 1.00 1 Row Box Cell Cleaning 5307.55 Rupees Five No

Paise Fifty Five

Quantity Discription Rate in words Per Amount Rs

b 1.00 2 Row Box Cell Cleaning 6307.45 Rupees Six No

c 1.00 3 Row Box Cell Cleaning 7307.35 Rupees Seven No

d 1.00 4 Row Box Cell Cleaning 8307.25 Rupees Eight No

e 1.00 5 Row Box Cell Cleaning 9307.15 Rupees Nine No

208 1.00 Opening all size Slab Drain works for monsoon Rupees Nil

treatment including removing the jungle up to 50 mt on

boths sides U/S & D/S of Slab Drain by JCB

machine,Removing unncesesarry soil,grass,Vegitation

etc cleaning and disposing incluidng all labour and

machinery etc complete below Slab Drain as per

direction and instruction of engineer incharge..

a 1.00 1 Span Cleaning 7547.73 Rupees Seven No

b 1.00 2 Span Cleaning 8547.63 Rupees Eight No

Quantity Discription Rate in words Per Amount Rs

c 1.00 3 Span Cleaning 9547.53 Rupees Nine No

d 1.00 4 Span Cleaning 10547.43 Rupees Ten No

e 1.00 5 Span Cleaning 11547.33 Rupees Eleven No

209 1.00 Dewatering of flood water by using Tractor Operated 1027.20 Rupees One Hr

Pump set from flood affected villages with pipe Thousand

arrangements including labours as directed with all lead Twenty Seven

and lifts etc. comp.

Quantity Discription Rate in words Per Amount Rs

210 1.00 Providing and applying primer coat at 7.5 kg per sqmt 95.86 Rupees Ninety Sqmt

over prepared surface of granular baase WMM with Five And Paise

emulsion heated in bitumen boiler fitted with spray set Eighty Six Only

including cleaing of road surface etc complete

I / We am / are willing to carry out the work at …………….% below / above ( Should be

written in figure and words ) of the tender rates mentined above Amount of my / our tender works

Tender amount Rs…………………. Tender amount

Add…….% above Rs…………………. Less…….% below

Net in words Rs……………….... Net in words

1 The Contractor Shall Exhibit a board with detailed Specification and details of work as

directed by the Engineer-in-Charge for which no extra payment shall be made.

2 The Labour cess will be deducted as per prevailing rules i.e.1% of the work done.

3 GST and Income tax TDS will be deducted as a source while making payments of bills.

4 In all R.C.C.Items in Rate Analysis Standard Cement Consumption has been taken as

per GOVT.G.R.PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in

S.O.R.therefore in R.C.C. items where there is a changes as per actual mix design the

Signature of Contractor

Deputy Executive Engineer Executive Engineer

R & B Sub Division R & B Division

Tharad Vav-Tharad