Supply Installation Testing Commissioning and Technical Support of Network Active and Passive Components and UPS wiring

Amount

Outdoor O. F. Cable 6 core SM

12 Port Fully loaded LIU Rack mountable

6 Port Fully loaded LIU Rack mountable

LC to SC Patch cord. SM

Cat6 4 Pair UTP Cable: 23 AWG

Cat6 Information Outlet

Face plate Singlex - Cat6

3 x 3 Surface mount box for Cat6 Outlet

Cat6 patch cord,3 mtr

Cat6 patch cord, 1 mtr

Cat6 patch panel 24 port Fully Loaded

Cat6A 4 Pair UTP Cable

Cat6A Information outlet

Face plate Duplex.- Cat6 A

3 x 3 Surface mount box for Cat6A Outlet

Cat6A patch cord,3 mtr

Cat6A patch cord, 1 mtr

Cat6A patch panel 24 port Fully Loaded

15U Wallmount Rack with Accessories

12U Wallmount Rack with Accessories

9U Wallmount Rack with Accessories

Supply of 25mm ISI PVC Conduit with accessories - Ivory

Perforated Cable tray 200X 60 MM including all accessories

L2 Fully Managed 24 Port Network Switch with 2*10G SFP+ uplink with 5 year 24X7 support pack

10G SFP Module for Core Switch (SM)

10G SFP Module for Distribution & Access Switches (SM)

1G SFP Module for Core Switches (SM)

1G SFP Module for Distribution & Access Switches (SM)

Design, Fabrication, Supply, Erection, Testing and Commissioning of Cubicle type fully compartmentalised, free standing type Switch boards, dust tight and vermin proof, fabricated out of 14/16 SWG CRCA sheet, painted with 2 coats of anti corrosive primer and 2 coats of stoving enamel paint of approved shade and oven baked/powder coated.The switch boards should have a set of suitably rated TPN Copper busbars with specified current and fault level, insulated with heat shrinkable, colour coded PVC sleeves and supported using DMC/SMC pillar or finger type busbar supports. The design will be as per the standards of Kerala State Electrical Inspectorate and Kerala State Electricity Board and the panel fabricator should have CPRI certification. Fabricated with 16SWG CRCA sheet and comprising the following:- a) Incomer :- 200 A, TPN MCCB as incomers - 01 No. b) Outgoing :- 1) 100A, TPN MCCB - 06 Nos. 2) All MCCBs shall be 25KA. 3) Indication lamps shall be provided. 4) 400A TPN Cu busbar one set shall be provided. 5) Neutral bus bar should have the same size of phase.

Supply of the following 1100V, Aluminium Cable, XLPE / AYFY in the existing cable trenches/cable trays / pipes/ etc. including supply and fixing of necessary clamping materials. 4 X 35 Sq.mm , 415 V

Supply of the following 1100V, Aluminium Cable, XLPE / AYFY in the existing cable trenches/cable trays / pipes/ etc. including supply and fixing of necessary clamping materials. 2 X 16 Sq.mm , 415 V

Supply of all materials for termination of the following PVC insulated Armoured Aluminium LT cables (AYFY/A2XFY) using single compression type cadmium plated brass cable glands , Copper crimped type cable lugs, cable identification tags and including gland earthing using copper conductor of adequate size, Al-Cu strip for termination of cables etc.4 X 35 Sq.mm , 415 V ( One set for one end)

Supply of all materials for termination of the following PVC insulated Armoured Aluminium LT cables (AYFY/A2XFY) using single compression type cadmium plated brass cable glands , Copper crimped type cable lugs, cable identification tags and including gland earthing using copper conductor of adequate size, Al-Cu strip for termination of cables etc. 2 X 16 Sq.mm , 415 V ( One set for one end)

Supply of the 50 Sq.mm / 1100 V , Insulated Flexible Copper Cable in the existing cable trenches/cable trays / pipes/ etc.

Supply of Termination Materials for 50 Sq.mm / 1100 V , Insulated Flexible Copper Cable ( One set for one end)

Supply of 4 way double door 100A MCCB VDB

Supply of 16 way SP DB

Supply of 12 way SP DB

Supply of 8 way SP DB

Supply of 2 Pole Isolator 40A

Supply of 2 Pole ELCB 40A 100ma Leakage

Supply of 1 Pole MCB 40A

Supply of 1 Pole MCB 16A

Supply of 1 Pole MCB 6A

Supply of 2 nos of 4 sq mm and 1 nos of 2.5 sq mm PVC insulated Copper Wire

Supply of 2 nos of 2.5 sq mm and 1 nos of 1.5 sq mm PVC insulated Copper Wire

Supply of 2 X 10 SWG Bare Copper

Supply of 3 nos 6A socket controlled by 2 switch with back box and cover

Supply of 2 nos 6A socket controlled by 2 switch with back box and cover

Supply of 1 nos of 16A socket controlled by 1 switch with back box and cover

Supply of 1 nos of 6A socket controlled by 1 switch with back box and cover

Supply of 20 mm PVC Conduit with all accessories - Black

Supply of All materials for Plate(Galvanised Iron) Earthing as per IS-3043-1987

Supply of 25X 6 MM GI earthing strip inclusive of providing earthing terminations and bracing of the terminations using necessary clamps, screws and bolts, PVC sleeves, etc.

Supply of 25 X 6 MM Cu Strip for Earth Bunch

Laying of OF Cable through PVC Conduit/ HDPE Pipe

Splicing of OFC

Termination of LIU

Laying of 4 Pair UTP Cable Cat6

Laying of 4 Pair UTP Cable Cat6A

Fixing and termination of Information outlet with SMB- Cat6

Fixing and port termination of patch panel- Cat 6

Fixing and termination of Information outlet with SMB- Cat6A

Fixing and port termination of patch panel- Cat 6A

Fixing & Dressing of wallmount Rack

Laying of PVC Conduit

UTP Node testing using Fluke Meter

Fibre Testing using OTDR Meter

Laying of the following 1100V, Aluminium Cable, XLPE / AYFY in the existing cable trenches/cable trays / pipes/ etc. including supply and fixing of necessary clamping materials. 4 X 35 Sq.mm , 415 V

Laying of the following 1100V, Aluminium Cable, XLPE / AYFY in the existing cable trenches/cable trays / pipes/ etc. including supply and fixing of necessary clamping materials. 2 X 16 Sq.mm , 415 V

Termination of all materials and termination of the following PVC insulated Armoured Aluminium LT cables (AYFY/A2XFY) using single compression type cadmium plated brass cable glands , Copper crimped type cable lugs, cable identification tags and including gland earthing using copper conductor of adequate size,Al-Cu strip for termination of cables etc. 4 X 35 Sq.mm , 415 V

Termination of all materials and termination of the following PVC insulated Armoured Aluminium LT cables (AYFY/A2XFY) using single compression type cadmium plated brass cable glands , Copper crimped type cable lugs, cable identification tags and including gland earthing using copper conductor of adequate size,Al-Cu strip for termination of cables etc. 2 X 16 Sq.mm , 415 V

Laying of 50 Sq.mm / 1100 V , Insulated Flexible Copper Cable in the existing cable trenches/cable trays / pipes/ etc.

Termination of all materials and termination of the 50 Sq.mm / 1100 V , Insulated Flexible Copper Cable with necessary clamping material and copper lugs.

Fixing of 6 way double door 100A MCCB VDB

Fixing of 16 way SP DB

Fixing of 12 way SP DB

Fixing of 8 way SP DB

Fixing of 2 Pole Isolator 40A

Fixing of 2 Pole ELCB 40A 100ma Leakage

Fixing of 1 Pole MCB 40A

Fixing of 1 Pole MCB 16A

Fixing of 1 Pole MCB 6A

Laying of 2 nos of 4 sq mm and 1 nos of 2.5 sq mm PVC insulated Copper Wire

Laying of 2 nos of 2.5 sq mm and 1 nos of 1.5 sq mm PVC insulated Copper Wire

Laying of 2 X 10 SWG Bare Copper

Fixing of 3 nos 6A socket controlled by 3 switch

Fixing of 2 nos 6A socket controlled by 2 switch

Fixing of 1 nos of 16A socket controlled by 1 switch

Fixing of 1 nos of 6A socket controlled by 1 switch

Laying of 20 mm PVC Conduit accessories

Fixing of All materials for Plate(Galvanised Iron) Earthing as per IS-3043-1987

Laying of 25X 6 MM GI earthing strip inclusive of providing earthing terminations and bracing of the terminations using necessary clamps, screws and bolts, PVC sleeves, etc.

Fixing 25 X 6 MM Cu Strip for Earth Bunch

RR INFOCOM

UL Technology Solutions Pvt. Ltd.