PROVN OF PT SHED WITH HIGH PLINTH AND KOTA STONE AT NO.1 TRG BN, BEG AND C ROORKEE UNDER GE ROORKEE

Amount

Site Clearance soft/loose soil complete all as specified and as directed.

Excavation in trenches,n exc 1.5m wide and n exc 1.5m in depth : for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed.

M&L P.C.C type D-2 1:4:8 (40mm graded aggregate) in foundation filling and mass concrete complete all as specified and as directed.

Use & waste Formwork to sides of rough finished flat surface of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.

Use & waste Formwork to sides of rough finished flat surface of concrete sides of pillars, posts, struts, piers, columns and stanchionsr complete all as specified and as directed.

Use & waste Formwork to sides of rough finished flat surface of concrete Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide complete all as specified and as directed.

Use & waste Formwork to soffits of flat suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

Use & waste Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L Mild steel TMT bar 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

M&L for Reinforced Cement Concrete (Design Mix) M20 (using 20 mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for Reinforced Cement Concrete (Design Mix) M20 (using 20 mm graded stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and as directed.

M&L for RCC (Design Mix) M20 (using 20mm graded granite stone aggregates) as in Beams, lintels and etc., complete all as specified and as directed.

M&L brick work Old size sub class B bricks in CM 1:6 straight or curved on plan exc 6m mean radius complete all as specified and as directed.

M&L brick work Old size sub class B bricks in CM 1:4 straight or curved on plan exc 6m mean radius in half brick walls complete all as specified and as directed.

M&L Rendering 15mm thick on fair faces of brick work in CM 1:6 or concrete sur faces finished even and smooth without using extra cement complete all as specified and as directed.

M&L Rendering 15mm thick on fair faces of brick work in CM 1:4 or concrete sur faces fini;shed even and smooth without using extra cement complete all as specified and as directed.

M&L two coats of cement based paint over a coat of primer including preparation on new surface of wall complete all as specified and as directed.

M&L Hardcore of broken bricks of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L 100mm Cement concrete type B- 2, 1:4:8 (40mm graded aggregate) as in sub floor complete all as specified and as directed.

S&F butt hinges, medium weight ,mild steel of 100mm long size acomplete all as specified and as directed.

S&F for aluminium, anodised, barrel tower bolt of extruded section, 150mm long, complete all as specified and as directed.

S&F extruded aluminium alloy handles, 150mm long size, fabricated type, anodised complete all as specified and as directed.

Providing and laying 60mm thick factory made (ISI Marked) chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laquer finish laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.

Material and Labour for Steel tubular Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections, Plate for joining angle, cleat, etc) including distance pieces, cleats etc conforming to I. S.1161- 1979 grade Fe-290 (Gde St.-165 complete all as specified and as directed.

M&L for applying two coat of synthetic enamel paint over a coat of red oxide on steel surface exceeding 10 cm in width or girth including preparation of new surfaces and including necessary sacffolding complete all as specified and as directed

Material and Labour, for pre-painted, galvalume aluminium zinc coating GI based profiled steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F 0.50mm thick pre-painted galvalume zinc coated GI based plain sheet of any colour having tensile strength of 550 Mpa, AZ-150 fixed as in roof covering/ cladding to wall, ridges, valley gutter etc with self tapping screws complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm soft/loose soil complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

M&L two coats of OBD over a coat of primer including preparation on new surface of wall ccomplete all as specified and as directed

M&L for machine cut Kota stone slab 18-20 mm thick, laid over and including 20mm thick screed bed in cement mortar (1:6) using coarse sand as in flooring, set & jointed in neat grey cement slurry and ponted in white cement mixed with pigment to match including grinding and polishing to granite finish complete all as specified and directed.

M&L machine cut kota stone slab 18-20mm thick in riser of step, skirting, dado and piller over cement screed base 10 mm thik 1:6 cm laid and jointed with grey cement slurry mixed with pigment to match the shade of the the slab including grinding ,rubbing and polishing complete all as specified and as directed

M&L 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone agg). Plinth protection laid to a slope of 1 in 24 in alternate basis system. Each bay shall not exceed 3m in length. 12mm wide & 75mm deep joint shall be formed between the bays which shall be filled with mastic filling to full depth comprising a mixture of 1 part of hot blow bitumen 85/25 portion and two parts of heated badrapur sand (by volume) etc complete all as specified and directed.

M&L for factory made Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, tower bolt complete with glazing bars, dovetailed or welded including soap coat complete all as specified and directed.

M&L for factory made Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, towe bolt complete with gauzed bars, dovetailed or welded including soap coat complete all as specified and directed.

S&F framed work such as grills gratings, etc with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bars barred iron doors, door chowkat, ladders; framed balusters; walk ways; railings; framework of water tanks, hold fast, sheet and similar work conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S&F factory made 35mm thick 2nd class hard wood glazed and skelton shutter (two or more panel) single or double leaf open rebated and prepared to receive glass gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc, size of members of shutters as specified in SSR Pt-I, section-8, clause 8.24(a) supplied and fitted to chowkats complete all as specified and directed.

S&F 300mm long Aluminium sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with beads in square n.exc. 0.5 sqm in each pane complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplesor MS beads size 2mm to 3mm complete all as specified and directed.

M&L for applying two coat of synthetic enamel paint In new surface over a coat of pink primer on wooden surface exceeding 10 cm in width or girth including preparation of surfaces and including necessary sacffolding complete all as specified and directed.

S&F 6mm thick designer non asbestos cement building board of size 60 cm x60cm fixed of laid inserted to GI frame work using main tee of size 24x38x0.5 mm and cross tee of size 24x28x0.5 mm made out of PGI sheet 0.30 mm thick doubled at web and single flange ,flange cover with powder coated sheet 0.25 mm thick for ceiling suspended with GI wire 4 mm dia upto 2 mtr long complete all as speified and directed. (Note:- If any minor electricial fittings and fixtures disturbed their-in will be match and fixed as existing).

M&L Providing, cement concrete 1:2:4 B1 (20 mm graded agg) in roof kerbs or mud stops, rounded orchamfered on edgec lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs ater troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directedomplete all as specified and directed.

Material and labour for point wiring with 1.5 sq mm PVC insulated, unsheathed, stranded copper conductor (FRLS) cable single core 1100 Volt grade in and including rigid PVC conduit medium grade 20mm dia or more ISI Marked concealed conduit/ casing caping and conduit accessories and cutting chases of suitable girth where required on brick/concrete surface & making good disturbed surface,provision of GI/Pressed steel terminal switch box with plastic laminated sheet 3 mm thick fixed with brass screw and washers along with 1.5 sq mm PVC insulated unsheathed stranded copper conductor cable (FRLS) as earth wire connected with main common earth dolly complete all as specified and directed for the following :-

One light/fan/bell/exhaust fan point controlled by one, one-way Piano type switch 5/6 Amp complete all specified and directed.

One 3pin/5pin 5/6 Amps socket outlet on same board controlled by one, one-way Piano type switch complete all specified and directed.

One 3pin/5pin 5/6 Amps socket outlet on independent board controlled by one, one-way Piano type switch complete all specified and directed.

S&F switch piano flush type white finish 5/6 Amps, single pole one way , 230 volts, 50 hz complete all as specified & directed.

S &F socket out let 2 pin 5/6 Amps & 3 pin 5/6 Amps flush type, 230 volts, 50 hz all as specified and directed.

M&L ceiling rose 3 terminal / PVC/ polycarbonate, isolated body complete all as speccified and directed.

S & F Distribution board (DB) made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 8 way IP 43 (double door) with 200 Amps rated copper bus bar neutral bar ,earth bar ,single pole and neutral 250 volts, flush to wall complete all as specified and directed.

Supply & fixing MCB, SP, AC, 240 volts of 06 to 32 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.

Supply & fixing MCB, SPN, AC, 240 volts of 40 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.

S&F LED tube light batten 20 watts 4 fts extruded polycarbonate housing, translucent diffuser with LED light source, 2000 lumen, natural white ,surge protection range- 2KV, voltage protection range 120-280 VAC with intergrated driver and surge protection complete all as specified and directed.

S&F LED light fitting 1 x 9W / 1 x 10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix in replacement of recessed mounted LED panel light 2'x2' size, 36 watts, full white / warm white as per site requirement with electronic driver in CRCA sheet steel body with polycarbonate diffuser suitable for POP / Amstrong / grid false ceiling complete with all fixing accessories including making electrical connection with pvc insulated and pvc sheathed twisted two core wire of suitable size complete all as specified and as directed.

Supply and fix galvanised 20 mm bore GI water tubing medium grade including all fittings such as bends, elbows, tees, reducers, sockets, union etc and laid in floor fixed on wall or ceiling complete all as specified and directed.

Supply and fix galvanised GI water tubing 25mm dia medium grade laid in floor / trenches including all fittings such as bends, elbows, tees, reducers, sockets, union etc and laid in trench complete all as specified and directed.

Supply and fix galvanised GI water tubing 50mm dia medium grade laid in floor / trenches including all fittings such as bends, elbows, tees, reducers, sockets, union etc and laid in trench complete all as specified and directed.

Drilling and tapping GI water mains 50mm bore (in position) for branch connections of the internal dia 20mm, complete all as specified and directed.

S&F straight plain brass ferrules (or connecting screws) screwed both ends and fixed to water mains for tapping branch connection of 25 mm bore pipe, complete all as specified and directed.

S&F gun metal gate valves for 50mm nominal bore (Class-1) with iron wheel head, srewed both ends for iron pipe ISI marked, complete all as specified and directed.

Supply installation, commisioning of water cooler cooling capacity 60 Ltr per hour and storage capacity 120 Ltr, stainless steel of cooler cabinet sheet material, High impact Polystreme (HIP) sheet water tank cover and lid bottom sheet material, stainless steel of cooler cabinet sheet material, electric driven single phase having approx storage and nominal capacity of 60 / 120 ltrs, complete all as specified and directed.

Supply and install Voltage stabilizer for automatic operation,single phase naturally air cooled indoor type & designed for input variation between 170 V to 270 V with output voltage stabilized at 230V with accuracy of ±2.5% , complete all as specified and directed.

M&L Point wiring with 2.5 Sqmm (Nominal area) PVC insulated and PVC unsheathed FRLS multi stranded copper conductor single core cable drawn through and including PVC non metallic conduit of 20mmdia ISI marked with complete accessories,including sunk mild steel 1.6mm thick terminal boxes with 3mm thick bakelite sheet top cover ISI marked complete including PVC insulated and unsheathed single core multistranded copper conductor cable of size 2.5 sqmm green in colour as earth continuity conductor connected to common earth and earth dolly, making good surface with white wash or distember complete all as specified and directed for water cooler.

As per item No-63 here in before but 1.5 Sqmm for 5 / 6 Amps independent socket point, complete all as specified and directed.

Supply and fix, Switch piano flush type 5 / 6 Amps, single pole one way complete all as specified and directed.

S&F socket outlet 3/5 pin 5 / 6 Amps flush type complete all as specified & directed.

Supply and fix galvanised iron 15 mm bore water tubing medium grade including all fittings such as bends, elbows, tees, reducers, sockets, union etc and laid in floor fixed on wall or ceiling complete all as specified and directed .

S&F 15 mm dia Gun metal, globe or gate valve,with iron wheel head,screwed both ends, complete all as specified and directed.

Supplying, laying, jointing and testing LT XLPE underground cable of size 35 Sqmm 4 core, heavy duty, 1100 Volts, PVC insulated and sheathed, armoured with multi-stranded aluminium conductor cable conforming to latest IS , laid in trenches/ducts or fixed to poles/walls or laid under roads/ paths/ drains/ culverts including taking up of old existing cable, all complete all as specified and directed.

Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls/pole including all for protection of LT cable complete all as specified and directed.

Labour and T&P for horizontal boring of hole passing through pavement/road/hardstanding by manual or mechanical means suitable for 50mm bore complete all as specified and directed

Supply and laid GI medium grade pipe for cable protection of size 40 mm dia complete all as specified and directed

Supply & installation of 20M high mast shaft in two section suitbale for 44 m/sec wind speed bearing capacity along with head frame, luminiaries carriage suitable for 08 luminiaries in symmetrical arrangement and other accesories manufactured in factory with raising lowering system comprising double drum winch, 5mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box, lightining finial, (Wiring material from JB to individual luminiare & MCB in base compartment are not included and are a part of installation), with supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template and outdoor stand mounted feeder pillar with 32A TPN MCB incomer, single dial time switch, 25A TP contactor for the automatic switching of luminiaries, power tool control with 2 No 9A contactors and raise lower push button, Incoming 25 sqmm and out going 16 & 2.5 sqmm terminals including one number aviation obstruction light (along with reqd wiring) & lightening arrester spike (along with 6 sq mm copper cable connect to earthing). Make- Bajaj, Crompton, Philips, Havells.

HIGH MAST SYSTEM MAKE : Approved Make Height of mast : 20 Meter No. of Section : Two Plate Thickness : Top - 3 MM, Bottom- 4 MM Material Construction : HT Steel as per BS-EN10 025 Base dia and top diameter (A/F) : Top : 150mm Bottom : 410 mm Cross section of Mast : 20 side polygon Standard for Galvanisation : A per BS EN ISO 1461 Size of Opening and door at base : 1200 x 250 mm Diameter of base plate : 570 mm Thickness of base plate : 25 mm Lighting protection finial : GI single spike of length 1200mm Max. wind speed : 44m/s as per IS 875 (Part III) Number of foundation bolts : 12 Nos PCD of foundation bolts : 490 mm Type / diameter / length of foundation bolts : TS 600/30mm dia/ 850 mm long

FOUNDATION DETAILS 1. Excavation dimensions 2800 x 2800 x 1500mm size 2. Lean Concrete 100 mm thick ( 1: 4: 8) D2 (using 40mm graded Aggregate) 3. Matt bars 12mm dia TMT Bars @ 200C/C both ways in double layers 4. RCC (1: 1.5 : 3) 2600 X 2600 X300MM as in footing 5. RCC (1 : 1.5 : 3) 1000 X 1000 X 1400 MM (1100MM below GL and 300 mm above GL) 6. 8 Nos 16mm dia TMT Bars 4 at corners 4 at centres of pedastal col as main bar with 600mm long craking at bottom over matt bars 7. 16 Nos 12mm dia TMT main bars (4 Nos each at 4 side with 600mm long cranking at bottom over matt bars. 8. 10mm dia TMT bars @ 150mm C/C as Stirrups 9. 300mm dia 850mm long foundation bolts 08 Nos inserted in to 16 mm thick anchoring plate 590mm dia at bottom with pointed galvanised nut one each at bottom and top of plate. 10. Foundaiton bolt min clearance 150mm above pedestal col to rest high mast base plate 25mm thick over the bolts. Galvanished nuts 01 number at bottom of base plate 2 Nos at top of base plate. Note : The unit rate is inclusive of necessary formwork, RFR removal of surplus earth, external finishes and other unforeseen items all as directed by Engr - in- Charge

LUMINAIRES CARRIAGE Material of construction : 50 NB ERW Class B-M.S Pipe Diameter of carriage ring (mm) : 710 mm (ID) Construction : 09 Arm, Welded Load carrying capacity : 09 Luminaire

TRAILING CABLE Conductor : Copper, 5 core, 2.5 Sqmm Insulation : EPR insulated PCP scheathed No.of circuits per mast : One

WINCH / POWER TOOL Type /SWL of winch : single gear Double drum, SWL 500 Kg Method of Operation : Integral Motor Motor Capacity : 2 HP ( Including suitable starter) No of Speeds : 6 Pole, Single speed Torque Limitor : With Mechanical Tripping Facility

STAINLESS STEEL WIRE ROPE Grade / construction : AISI 316, 7/19 Construction Number of Ropes : Two Continuous Diameter (mm) : SS304 Grade, 6 mm Breaking load Capacity : 2350 Kg (minimum)

Supply and fix LED flood light of 150W made of pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP66 protection with system efficiency ,complete all as specified and directed.

Supply, Installed & fix maintenance free earthing copper bonded steel earth rod of 10 feet long having diameter of 17.2mm with copper bonding thickness of 250 micron,UL listed,CPRI Tested at 25 KA fault current for one second and is provided with universal clamp made of SS earth enhancing compound shall be of 50kg/pit (resistivity is less than 0.12 Ohm meter) tested as per IEC 62561-7.The above arrangements shall be provided with heavy duty earth poly plastic pit cover of 6000 kg load bearing capacity (Size:270 x 240 x 200mm) and FRLS insulated copper conductor of size 6 sqmm, single core cable drawn through and including medium grade rigid PVC conduit upto 7 mtr incl cutting and chases on wall / floor and making good using PCC work complete all as specified and directed.

M/s Inderlal

G.H. INFRASTRUCTURE PRIVATE LIMITED

AMAR NATH SHARMA

M/s MAA SHAKTI CONSTRUCTIONS AND SUPPLIERS

IRFANAHMAD CONTRACTOR

CHITTER MAL & CO

ANEJA AND COMPANY