RENOVATION OF TALUK HEAD QUARTERS HOSPITAL

Amount

building

10.1 : Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

50.10.1 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

od341957/2019_2020 : Roofing with G.I. hard colour powder coated trfford sheet 's 35mm thick or nearest available thickness with over lap's of 150 mm at end's and G.I hook's or crank C.I.bolts and nut's including plain washer and bitumen washer's etc complete.<br>

12.51.1 : Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600 mm)

od341958/2019_2020 : Supplying and 150mm dia PVC rain water gutter semi circular section including fixing with 32 x 5mm flat support's at 1m intervel etc. complete.

50.6.2.2 : Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

od341959/2019_2020 : Providing and fitting Aliminium door with partely glazed and partly laminated 5mm thick shutter fixing with brass pivot and frame with 50 x 25 mm and 100 x 25 mm adonised aluminium square tube with glazing clip rubber beeding etc.

od341960/2019_2020 : Poviding aluminium fixed window's using powder coated aluminium section's including cost of materials labour charge's etc. complete.

od342094/2019_2020 : Providing and fixing of good granite name board with lettering including of all cost conveyance labour charge etc. complete.

Santhosh.K.N

Thottunkal Constructions

Bidder Name

Thottunkal Constructions

Santhosh.K.N

SURYA HARDWARE &ENGINEERINGS