RESURFACING OF ROAD AT CERTAIN LOCATIONS AT AF STN BAREILLY

Amount

M&L for repair to potholes of any depth n exc 1 Sqm each including sweeping free from dust and mud or water scoring sunken surface in roads, path etc, cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 kg per 10 sqm using paving bitumen VG-10 putting in premixed bituminous macadam well rammed and sealed with binder i.e. paving bitumen grade VG-30 6.80 kg per 10 Sqm and blinded with 0.09 Cum of stone chippings 6.3 mm size, again well rammed depth of potholes n exc 30 cm complete all as specified and directed.

M&L for preparation of black top surface of road by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose material/dirt etc complete all as specified and directed.

M&L for applying evenly a tack coat with bituminous primer @ 5 kg per 10 Sqm using paving bitumen grade VG-10 with mechanical sprayer complete all as specified and directed .

M&L for providing bitumen premix semi dense asphatic concrete 30 mm consolidated thickness with 5.50% binder (paving bitumen VG-30) by weight of total mix, mixed in computrized hot mix plant, laid, rolled and compacted to required gradient and camber with the help of mechanical paver and power roller 8 to 10 ton capacity complete all as specified and directed. NOTE:- (i) The mix design shall be got done from approved lab and got approved from GE before commencement of work. (ii) in the event of variation in the mix design in the percentage of binder content on minus side the difference in quantity of binder content will be adjusted through supply only rate or procurment rate whichever is more paving bitumen VG-30. (iii) No adjustment shall be applicable if excess quantity of binder content is used /approved in the execution of work under this item.

M&L for premix bituminous macadam (consolidated thickness 75 mm or less) with crushed and graded stone aggregate mixed together with VG-30 graded paving bitumen (4% by weight of total mix) to meet the disired requirement as mentioned in Particular Specification, mixing bitummnious concrete in computerized hot mixing plant, laying and spreading uniformly by means of mechanical paver and rolled and compacted to required gradient and camber by 8 to 10 tonne vibratory road roller complete all as specified and directed. NOTE : No adjustment shall be applicable if excess quantity of binder content is used/approved in the execution of work under this item.

M&L for preparing of old/new black top surface of road and applying one coat of reflective thermoplastic road marking paint (white or yellow) 2 mm thick for longer durability and paint material shall be conforming to MOST (Min of surface transport) specification complete all as specified and directed.

S&F in repairs road stud of aluminium alloy die casted dynamically designed very high impact strength and fitted with 2 Nos. highly reflective reflectors and 2 Nos. eye balls each on both sides including fixing with epoxy complete all as specified and as directed. (Make 3M/SHAKTI NEW DELHI / TATA BP/DARK EYE)

S&F in repairs solar stud 125 x125 x 25 mm made from aluminium alloy body, powered by nionocrystal solar panel with high capacity Ni-Cd rechargeable battery, LEDs-010 mm, 3 pieces each side and total 6 pieces are used for high brightness of different colours back-up for 12 hours of continues lighting at night of any colour including fixing with epoxy all as specified and directed. (Make 3M/SHAKTI NEW DELHI / TATA BP/DARK EYE)

Shri Siddhi Vinayak Constructions

M/s Agarwal Builders