MID/AN/04

Design Supply Installation and testing of HC Pump set 4.5 cusec x 150 HP motor x 60 MH with allied work of LIS Thandapani The job involves dismantling of Pumping unit no. 02 from RCC foundation block by means of complete dismantling of pumping unit from the suction and delivery lines by cutting of damaged/worn-out nuts and bolts using blade cutter and manual labour, and then de-coupling the pump and the motor, removing the electrical connections from the motor by means of removal of insulations and then removal of nuts and bolts from the connection thimbles using appropriate tools tackles. Dismantling the pump and motor individually from the base frame and then lifting of pump and motor with the help of chain pulley block and tripod stand using manual labour from its position and stacking them at an appropriate place. Removing the old damaged base frame from the RCC foundation block by means of cutting of damaged/worn-out foundation nuts and bolts using suitable cutting arrangement and stacking at an appropriate place. Providing/Fitting and installation of Raw water H.C pump of 4.5cusec discharge, 60-meter head (preferable split casing due to site conditions) on the installed base frame compatible with induction motor 3 phase 1500 rpm. Type of Pump: ISI Marked split casing Type Horizontal Centrifugal pump. Material to be used 1. Impeller- Cast Iron. 2. Pump Shaft - carbon steel. 3. Wearing Ring - Stainless steel. 4. Pump casing - Cast iron. 5. Base frame – Mild steel. 6. Vertical suction lift- 4.5m The pump should have preferably the suction and delivery size of 250/200 mm each or as per the designed pump inlet/outlet. providing /fitting, installation, testing and commissioning of 150HP Motors with allied works at LIS Thandapani. The job also involves design, fabrication and Fitting and Installation of new base frame as per requirement of pumping unit. Fitting of new pump and motor assembly on the base frame. Providing / Fitting of new coupling, coupling the pump & motor with the help of rubber bushes, nuts & bolts. Complete job includes cost of HC Pump, material, transportation charges, hiring charge of welding set and any other tools and tackles required for executing the job and labor charges at site. Testing of the newly installed pump. Any alteration required during the execution of the job will be done by the firm itself in consultation with site in charge. Complete Job Note: The tenders should visit the site before quoting the rates.

Electrification of pump room and outside of pump room with allied work at LIS Thandapani by way of using standard quality material as per site requirement for lightning circuit. Heating circuits and by providing and fitting of allied points with LED bulbs 02 No, heating point 15 AMP 01 No, Roadways LED flood lights 02 No and LED flood light in pump room 02 Nos with complete superior quality accessories with on/of switch 32 AMP baton holder 05 No, 3 pin socket 5AMP 02 No, Main switch 32 AMP 01 No using PVC multi stand copper cable of suitable current charring capacity, tape rolls, nails, screws, conduit pipe, PVC Copper cable of suitable size, plastic PVC pipes, wooden boxes/ iron boxes, Bakelite sheets, switch junction boxes, Pipe bend, Steel wire, service line etc

N B Engineering and Electric Works

Rishabh Electricals and Mechanical Works

M/S FASTTRACK ENGINEERS

N B Engineering and Electric Works