NIT NO. 29 ITEM NO. 02

Supply of Horizontal split casing pump, suitable for clear water having min. 38 mtr. Head, discharge 150 m3/hr. C.I. impeller, S.S. Shaft & sleeve, 1450 RPM suction/delivery size 150mm X 100mm,the pump coupled by pin type coupling with 30 HP squirrel cage induction motor. 3 phase, TEFC IE2 415 Volts, AC supply, F-Class Insulation, 1500 RPM, mounted on M.S. base frame and including coupling guard. Make: Pump- KBL/M&P/DJB Approved & Motor- ABB/Crompton/DJB Approved

Supply of CIDF swing type Non return valve as per IS 5312 (Part 1&2), PN 1.0, size 100 mm. Make: - KBL/IVC/DJB Approved

Supply of CIDF non rising spindle sluice valve, PN 1.0, IS: 14846 size 100 mm. KBL/IVC/DJB Approved

Supply of CIDF non rising spindle sluice valve, PN 1.0, IS: 14846 size 150 mm. KBL/IVC/DJB Approved

Supply of nut bolt with washers of good quality

Supply of Rubber insertion sheet 50% synthetic. Make: Jyoti/Duratuf/DJB Approved

Providing of MS pipe 100 mm dia, ‘B’ class as per IS: 1239, Make:-Jindal/Tata/DJB Approved

Providing of MS pipe 150 mm dia, ‘B’ class as per IS: 1239, Make:-Jindal/Tata/DJB Approved

Supply of MS flange of 100mm of Medium Class

Supply of MS flange of 150mm of Medium Class

Providing/Fabricating of MS Tee of size 150MM Medium Class Conforming to IS-1239.

Providing/Fabricating of MS Tee of size 100MM Medium Class Conforming to IS-1239.

Providing/Fabricating of MS Bend, Size 100 MM, Medium Class Conforming to IS-1239.

Providing/Fabricating of MS Bend, Size 150 MM, Medium Class Conforming to IS-1239.

Supply of MS foundation bolt of size 450 X 16 MM.

Providing & Fixing of the Pressure Gauge of dia. 100mm & range from 0-60 Psi on delivery side including providing all the material /accessories such as GI fittings, Bib cock etc. required complete the work including as per site requirement. Make:-Hguru/fibeg/DJB approved make.

PVC insulated copper flexible cable single core 25 sq.mm Make: Havells/Gloster/DJB Approved

Supply of Flexible Spiral-reinforced PVC Conduit of suitable size for 25 sq. mm single core cable.

Supply of Insulating Rubber Mats for Floor for Safety Purpose Size- 2 mtr*1 mtr*10 mm Black/Red/Blue Plain Chequered confirming to IS 5424:1969

Providing & Fixing of Fire Fighting equipment Co2 type Fire Extinguishers ISI Marked Conforming to IS15683, Complete with Delivery hose horn, wheel type release valve locking arrangement, operation manual and bracket, operating Temperature -30 degree Celsius to +60 degree Celsius of 02 Kg. Make Life Guard/Kanex/DJB approved

Earthing made for Existing LT distribution Panel with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt) as per site requirements.

Providing and fixing 25 mm*05 mm G.I. strip on surface or in recess for connections etc. as required

Painting G.I./M.S. pipes and fittings with synthetic enamel white/dark blue paint with two coats over a ready mixed priming coat, both of approved quality for new work 100 mm diameter pipe and 150 mm Diameter pipe including fittings.

Making of all safety arrangement i.e. Safety Belt, gum boots, helmet, Gloves etc for all work

Dismantling the existing complete Electrical & Mechanical connections from Supply meter/ Main Switch/Change Over/Starter /Motor and Old Motor Pump Sets. Removing suction and delivery lines, Sluice Valve, NRV etc as per instruction of Engineer In-Charge by electric cutter, tool & Tackle, manual labour and shifting the same to JE Store as per Engineer In-Charge,where required including Cartage. Incomer Switch Fuse Unit disconnecting the Incoming / outgoing cables etc. Dismantling the switchgear in the complete shut down and safe conditions as per the availability of shut down at site.

Excavation for foundation in soft soil including dressing of side sand ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil directed by Engineer In-Charge

Demolishing lime concrete manually/ by mechanical means anddisposal of material within 50 metres lead as per direction of Engineer-in-charge.

Providing and laying in position reinforced cement concrete1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) in foundation of pump, DG set etc including form work etc as required (excluding reinforcement).

Installation of above 01 No. 30 HP motor pump Set and Installation/adjustment of Old installed pump set of 30 HP according to space available along with installation /all piping works 150 mm and 100 mm, fixing of suction/Delivery lines, valves, gap pieces for old and new by electric welding set, manual labour ,alignment the pump/motor, fixing of M.S delivery line in the existing pumping main and also making electric connection of the pump sets etc, executing allied electrical, mechanical and civil works i/c watch and ward, cartage, taking all safety precautions, Arranging all tools and tackles i/c welding set, gas cutter etc as required to complete the work as per direction of Engineer In-Charge

Making proper connection for all Electrical equipments, with proper support as per site requirements and as per guidance of Engineer In-Charge. Making the Incoming cable connections from the existing LT Panel including providing all the material as required such as main cable etc as per site requirement.Testing and commissioning with existing Panel and its accessories. the installed E&M equipments for operations first at NO load and then at ON load including operation as per the satisfaction of the engineer in charge

HYDROCON ENGINEERS