Raising of High Security Wall by 15 feet and Construction of additional Watch Tower in between tower no. 01 to 04 ( Balance Work) at District Jail Rajouri.( C. No. 73)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering with C.C. (1:3:6) (1 cement : 3 coarse sand : 6 Cr. Stone Agg) . All works upto plinth level.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 degree, landings, balconies, shelves, chajas, lintels, bands, plain window sills, staircases and spiral staircases upto five level including curing but excluding the cost of centering, shuttering, finishing and reinforcement with (1:1.5:3) mix (1:1.5:3) (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc and removal of form for: Lintels, beams, plinth beams, girders, bressumers and cantilevers

Brick work with common burnt clay F.P.S. (non-modualar) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:6 (1 cement : 6 coarse sand).

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level.

15 mm cement plaster on single or half brick wall of mix 1:6 (I cement : 6 fine sand).

Finishing walls with acrylic smooth exterior paint of required shade on new work (two or more coats applied @ 1.67 ltr. / 10 sq.m. over and including priming coat of exterior primer applied @ 2.20 Kg/10 sq.m.)

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc as required in gratings, frames guard bar, ladder, railings, brackets, gates and similar works.

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete.

Providing and fixing in position powder coated aluminium (min. 16 gauge ) in Doors, windows and Ventlator including cost of aluminium frame, acessories, fixtures, glazing (5 mm thick plain glass), wire guage, etc. all complete, including all leads, lifts, costs and carriages of all materials involved. (Section of Aluminium as directed by EIC with prior approval)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete (Size of tile 600x600 mm )

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work.

Carriage of materials by mechanical means and head load : Carriage of sand approx. 150 Km by mech. Means and 50 mtr. By head load.

Carriage of Stone Agg. Approx. 10 Km. by mech. Means and 50 mtr. By head load.

Carriage of Bricks approx. 15 Km. by mech. Means and 50 mtr. By head load.

Structural steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc. including, cutting, welding, hoisting, fixing in position and applying a priming & paint coat and including welding and bolted with special shaped washers etc. complete with hot finished welded type tubes, including all leads, lifts, costs and carriages of all materials involved, as directed by EIC.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia. 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required as per the direction of EIC, including all leads, lifts, costs and carriages of all materials involved and also including cost of form work / staging/ shuttering platform etc. all complete.

Providing and fixing 10 mm x 200 mm GI fasteners in the 20'0" high security wall for fixing MS sheets, including all leads, lifts, costs and carriages of all materials, tools involved in the work, drilling holes, scaffolding, chemical anchoring etc all complete at work site as directed by EIC.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular type switch, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required Anchor Roma Plus/GM/Legrand.

Group-C

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required (as per Schedule)Finolex/Polycab/Havells/RR kabel/Anchor make

2x1.5 Sq mm * 1x1.5 Sq mm

2x2.5 Sq mm * 1x2.5 Sq mm

2x4 Sq mm * 1x4 Sq mm

Providing and fixing of Ceiling rose 3 plates including necessary terminations as required.

Supply and fixing modular dummies suitable for Anchor plus series/ GM/ Great white make

Providing and fixing of Fan rod 2.5'

Providing and fixing of Fan hook fastner

Providing and fixing of following type of Modular type switch Socket combine with gang box and allied accessories including terminations complete Anchor Roma Plus/GM/Legrand make.

5/6 A Modular

15/16 A Modular

Providing and fixing of modlular stepped type fan dimmers Heavy duty including necessary terminations as requried Anchor Roma Plus/GM/Legrand make.

Providing and fixing of 48" Sweep ceiling allied accessories complete including necessary terminations crompton/ Havells/Orient/Usha Make.

Supplying and fixing 12 way double door, single pole and neutral, sheet steel MCB distribution board, 240 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc as required. ( But without MCB/RCCB/Isolator)

Providing and fixing of following type of MCB's/switch gear of L&T/Havells/ Anchor/Schnedier/Legrand/indo asian opti pro of 10 KA or more capacity series including testing and necessary terminations.

6A-32A MCB's

Providing and fixing of LED lights of following type Phillips/Crompton/Havells make surface mount type including necessary terminations as required.

T.5 LED 4' Long 20 watt

LED 12 Watt Bulb

Providing and fixing of Angle/straight modular holders including terminations GM/Havells/Krant /Great white make

Providing and laying of 2 core 50 sq.mm aluminium armoured cable to be laid from source to pannel including routing underground in HDPE pipe and to be fixed on walls etc via clamps, saddles etc including terminations as required.

Providing and fixing PVC conduit 2 mm thick of phenolex high power or equivalent make of 25 mm dia.

Providing and fixing Junction boxes/deep including all carriages and cost of material involved.

Providing and fixing fan boxes including all carriages and cost of material involved.

Providing and fixing LED flood lights of 100 watt of orient, Syska, Phillips or equivalent make complete including cost of brackets and other accessories involved.

Providing and fixing of maintanance free chemical earthing including digging/ drilling of 3mtr. / 10 ft. deep pit in hard / semi hard soil, chemical material and laying of pipe electrode with external dia of 80 mm GI with back fill compound 50 kg in the pit and disposal of unwanted material from earthing site to disposal site and earthing should provide desirable earth resistance value as per IS standards.

Please Enable Macros to View BoQ information