8426/E8 PERIODICAL SERVICES INCL SMART PERIODICALS TO MD ACCN AT STN BAREILLY UNDER GE (EAST) BAREILLY

Amount

M & L for preparation of putty / plastered surfaces of walls and applying a coats of cement base paint on external wall surfaces all as specified in SSR Part I and directed.

M & L for complete removal of existing treatment by brooming down or steel wire brushing, scrapping down and applying two coat of cement based paint on old decorated or undecorated wall surface, complete all as specified and directed.

M&L for preparation of putty / plastered surfaces of walls and applying two coats of oil bound distemper using roller complete all as specified and directed.

M&L for complete removal of existing treatment, and applying 1 to 1.5mm thick wall care putty on wall surfaces even and smooth complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of walls and applying one coat of distemper oil emulsion using roller complete all as specified and directed.

M & L applying two coat of white wash on old decorated or undecorated ceiling surfaces including preperation of surfaces, complete all as specified.

M&L for complete removal of existing treatment, preparation of old decorated plastered or unplastered surfaces of walls / roof projections including facia,cornices etc. and applying two coat of white putty and applying one coat of primer by using Airless spray techonology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressue and paint usage and certified by paint manufacturer and accessories for applying Primer, should be able to spray in hard to reach areas and penetration of Primer, on the surface to achieve excllent application using limited manpower complete all as specified and directed. Note : - Sanding of old decorated surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.

M&L for applying two coats of exterior weather proof acrylic based anti-fungal paint (100% acrylic) smooth emulsion with silicon additives that offer anti alge high performance exterior wall finish with 6 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and accessories for applying Paint, should be able to spray in hard to reach areas and penetration of Paint on the surface to achieve excellent application using limited manpower complete all as specified and directed.

M & L for preparation of old painted wooden surface of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint (any tint/shade) complete all as specified and directed

M & L for one coat of synthetic enamel paint (any tint/shade) including preparation of old decorated steel surfaces of any description over 10 Cm width or girth not otherwise described.

Taking down cement or lime plaster of any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc from ground floor complete all as specified and as directed. Note :Cost of scafolding for taking down is deemed to be incuded in this item

M&L applying two coats of Apex paint over a coat of primer on old decorated or undecorated Roof/Wall surfaces/jaffery including preparation by brooming down or steel wire brushing, scrapping down, brushing, washing rubbing down and stoping of distempered and painted surfaces, complete all as specified and directed.

M & L for rendering 5mm thick in cement plaster 1:3 on fair faces of brick work or concrete surfaces as in ceilings complete all as specified

M & L for rendering 15mm thick on oher than fair faces of brick work or concrete surfaces (Cement plaster 1:6) finished even and fair without using extra cement complete all as specified and directed

M&L for 15mm thick rendering CM 1:4 on fair faces of brick work or concrete surfaces finished even and fair without using extra cement for height exc. 3 m and not exc 15m from ground level complete all as specified and directed (Note: Rate included fir necessary scaffolding and arrangements for working)

M&L for 15mm thick rendering CM 1:4 on fair faces of brick work or concrete surfaces finished even and fair without using extra cement for height n.exc 3 metre from ground level complete all as specified and directed. Note :Cost of scafolding for taking down is deemed to be incuded in this item

M & L for cutting chases of hanging chajjas, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of sunshades, shelves, lintels, Chajja ( up to IInd floor) etc making good, cutting out exc 10cm and not exc 40cm girth in RCC chajjas upto height not exc 12m from ground level in brick walls complete all as specified and as directed. Note :Cost of scafolding for taking down is deemed to be incuded in this item

M & L for preparing new surfaces of ceiling, plastered or unplastered and applying 3 coats of white wash to ceilings all as specified and as directed.

M&L for preparation of new plastered surface and applying two coat of distemper oil emulsion after preparation of wall surface applying with 2mm thick in two layer wall Putty all as specified and directed

M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coat of cement base paint on external wall surfaces complete all as specified in SSR Part I and directed.

S&F in repair 10 mm thick PVC board for marking of quarter/ bldg numbers including writing letters, figures, stops, commas, dashes, hypen, brackets etc with all necessary fittings complete all as specified and directed. Note-Design, colour, size of boards and letters shall be approved by GE.

Dismantling of concrete by chiseling from RCC members like column , beam, parapet facia, chajja, ceiling,etc exposingthe reinforcement without disturbing the reinforcement free from rust by sand blasting/using chemical , apply a coat of rustolin to remove rust and acralic polymer on old rusted reinforcement proving at places addl reinforcement welding with existing reinforcement as directed wherever required binding RCC 50 mmx50 mm (10 mm gauge welded mesh ) & tack , securing with clips / blinding wire, welding & provision guniting pressure 2.2 to 2.5 kg /sqm with admixer 1 cement 3.5 of sand of thickness 25 to 40 mm including stripping floating with wooden strippers for proper dimension control neccssary form work & scaffolding up to three storey and including height of head room complete surface of guniting to be finished fair with 10 mm thick plaster in cement mortar 1:4 with water proofing compound @3% by weight of cement and construction fibre as per manufacturer instruction cleaning & removing of waste meterial etc as dirply two coat of water proofing liquid new coat ezee at interval of 8 hours cure for the surfaces complete all as spd as directed

M/S Gupta Builders (BID ID -3436044)

M M CONSTRUCTIONS (BID ID -3436594)

M/S ARORA ENTERPRISES (BID ID -3435972)