Construction of Girls toilet block and Shed at Government Senior Secondary School Pabupura Jodhpur. SH Allied electrical works

Amount

Supply of hot dip galvanized 5 meter nominal length octagonal pole with 130 mm bottom, 70 mm top, 3 mm section thickness, G.I. socket with suitable bolts at top, 1 mtr long hot dip galvanized single arm standard bracket made up of 40 mm nominal dia GI pipe suitable to mount on pole, suitable degree of bending angle between pole and arm, reducer for fixing below LED fittings, MS base plate of size 200 x 200 x 12mm thick welded with the base of pole, inbuilt flush type junction box alongwith double pole 6 A, 10 kA, “C” curve, MCB, 10 amp 4 pole terminal block, bakelite sheet etc complete with all accessories as required. (length of bracket shall be based on design) for installation of LED street light luminaire suitable for wind velocity as per IS 875 (but not less than 50 m/sec.).

Assembling, installation testing and commissioning of 5 Mtr. height G.I. octagonal pole, welded MS plate at bottom, fixing G.I. socket with suitable bolts at top, installation of overhang bracket and bolts on pole, making M20 cement concrete foundation of size 400 mm x 400 mm x 1.3 m (1.1 mtr below the ground & 0.2 Mtr above the ground) with reinforcement, supply and fixing of 4 nos of M16 X 450 mm long J type bolts, nuts, template etc., supply and fixing of 1 m long 63 mm dia DWC HDPE pipe in foundation, finishing of foundation, white cement painting of exposed foundation, earth connections of pole with GI wire etc complete as per OEM recommendations as required.

Pole numbering with reflective coloured 3M or equivalent sheets or reflective Paint etc., as required as per site conditions.

Supply of 30 W nominal capacity LED integral street light fitting outdoor type having pressure die cast alluminium housing with epoxy powder coated finish, IP66 protection, LEDs, inbuilt convertor, accessories etc. suitable for installation with existing bracket / pole and use on 230 volts, 50 Hz, single phase, A.C. supply complete with all accessories as required and as per technical specification.

Installation, testing and commissioning of LED street light luminaire on existing street light pole of 5 mtr heigh including connection by supply and drawing of 3Cx 1.5 sqmm PVC insulated and FR PVC Round Sheathed, Copper Conductor (flexible) industrial cable conforming to IS: 694, with upto date amendements from loop-in-loop-out box (junction box) upto the individual street light fittings, connection etc. complete as required & as specified.

Supply of 20W 6500K Wall mounted batten extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete with all necessary accessories & lamp as required.

Installation, testing and commissioning of pre-wired, LED Luminaire of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supply of 230 Volts, 50 Hz, 80 Watt LED Canopy Light / Luminaire made of Pressure die-cast aluminium alloy for housing (heat sink) for effective thermal management and heat dissipation, sturdiness & excellent corrosion resistant with IP 66 protection, equipped with four screws and cradle for ease of installtion etc. meeting minimum technical specifications as laid down in the tender etc. complete as required.

Installation, Testing & Commissioning of 230 Volts, 50 Hz, Canopy LED Luminaires, making suitable arrangements of GI/MS stiprs or any other arrangement as directed by EIC for proper installation of fixture under the existing canopy including connection etc. complete as required.

SITC of wall mounted electrically operated Sanitary Napkin Incinerator of burning capacity 02 Napkins per cycle operatable on 230V, 50 Hz input supply with digital temperature control, Auto Cut off after completion of process, auto thermal cut off and Smoke outlet metal hose (upto 2 Metres) including making suitable opening for smoke outlet hose, making good the damage, connection, Minor civil works etc.complete as required.

SITC of energy saving High Volume Low Speed (HVLS) ceiling fan with maximum speed 120 rpm, minimum air delivery 7550 CFM, maximum power 0.4 kW, consisting of 5/6 airfoil blades, 8 feet sweep size, geared/gearless design with low maintenance and low noise level, energy efficient motor, speed control through Variable Frequency Drive (VFD) with inbuilt protective module, including supply & fixing of power and control cabling along with earth wire, termination glands/lugs etc. from VFD upto fan motor, suitable down rod as per site requirement, safety ropes, supports and mounting arrangements i/c welding, drilling, providing staging, ladders, boom lift, scaffolding, labour etc. complete including all components and accessories as required as per actual site requirements and as per specifications.

Supply of 4C x 10 sqmm, XLPE insulated, PVC sheathed aluminimum multi stranded conductor armoured power cable of 1.1 KV grade confiring to IS 7908 (part I) with upto date amendements etc as required.

Supply of 3.5C x 35 sqmm, XLPE insulated, PVC sheathed aluminimum multi stranded conductor armoured power cable of 1.1 KV grade confiring to IS 7908 (part I) with upto date amendements etc as required.

Supply of 63 mm (OD), PN-6, PE 80 size ISI marked, HDPE pipe confirming to IS-4984-1995 with up to date amendments and confirming to tender’s technical specifications, terms & conditions i/c loading, unloading etc. complete as required.

Laying of 63 mm Dia HDPE pipe in the road crossing / rocky area/ ground including trenching (80 cm deep & 30 cm Wide), refilling & making good the same as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL/HDPE pipe as requried. Upto 35 sq.mm

Supplying and drawing 3 X 1.5 sqmm 1.1kV PVC insulated & PVC Round Sheathed Copper Conductor as per IS:694-1990 from the looping loopout cable termination box to Street light fittings inside the lighting pole etc. as required.

Supplying and making end termination with brass compression gland and copper/aluminium lugs according to the cable for 4 x 10 sqmm (25mm) aluminimum cable. size for PVC/ XLPE insulated and PVC sheathed armoured copper/ aluminium conductor cable of 1.1 KV grade as required.

Supplying and making end termination with brass compression gland and copper/aluminium lugs according to the cable for 3.5C X 35 sq. mm (32mm) aluminimum cable. size for PVC/ XLPE insulated and PVC sheathed armoured copper/ aluminium conductor cable of 1.1 KV grade as required.

SITC of Feeder panel (Size 300mm X 600mm X 170mm) made out of polycarbonate box with IP 66 rating suitable for installation of MCBs DIN rail with provision of In/Out cable entry at top & bottom with following :- 1) 32A 4P MCB as Incommer - 01 No 2) Digital time switch - 1no (Austrominical Timer) 3) Contactor 3Pole MCX 25- 1 No. 4) Input and output terminal block. 5)16A DP MCBs as outgoung - 02 Nos. Power and Control wiring between incomming MCB, time switch, contactor and output terminals complete as required for operation of street light circuits.

Design, Supply, Installation,Testing and Commissioning of outdoor type double door cubical panel suitable for 3-Phase, 415Volts, 50 Hz power supply, fabricated from 2 mm thick CRCA powder coated sheat, dust & vermin proof pedestal mounted, front openable door with locking arrangement and providing following switch gears and accessories with suitable supports etc as required including civil works for constructuction of cement concrete pedestal suitable for mounting of cubical panel: (A) INCOMER (i) 4P, 50 Amp MCCB, breaking capacity 30 kA with adjustable overload setting Make: L&T Cat. No. DU100H or Equivalent. - 01 Nos. (ii) LED type Phase indication (RYB) - 1 Set (iii) 6 Amp Control MCBs - Set (B) Bus bars (i) Suitable for 75 A TPN,Aluminium (C) OUTGOINGS (i) MCB 4P, 32A -2 Nos. (ii) MCB 4P, 25A -2 Nos. (iii) MCB 2P, 25A -4 Nos. (iv) Suitable size connectors (D) Metering (i) 3 Nos. CT CL-1 15 VA 100/5 amp - 1 Set (ii) LED Display Type 3 Phase Single Function Voltmetre (iii) LED Display Type 3 Phase Single Function Ammetre

Earthing with GI earth pipe 4.5 m long x 40 mm dia. Including accessoried, providing masonry enclosure with cover plate having locking arrangement and watering pipe, charcoal, salt etc. including drilling of hole to accommodate the pipe etc complete as required.

Providing and laying earth connection from earth electrode with 6 SWG dia GI Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Supply of 300mm sweep, heavy duty Exhaust fan suitable for use on single phase, 50 Hz., AC Supply of size 300mm sweep along with all accessories complete as required as per the specification mentioned in Tender Document.

Installation, testing and commissioning of exhaust fan in the existing opening, including making good the damage, connection and dismentaling old exhaust fan etc. as required.

Awasthi Electric Works