REPAIR TO BOUNDARY WALL OF CHILDREN PARKS, HARD STANDING, PAVER BLOCKS AND CHEQUERED TILES IN FOOTPATH WITH KERB STONE IN DOMESTIC AREA AT AF STN HALWARA

Amount

Demolition of brick work built in cement mortar including all quoins, arches, pillers etc, complete all as specified and directed.

M&L brick work with sub class B bricks, straight or curved on plan exceeding 6 cm mean radius built in cement mortar 1:6, complete all as specified and directed.

All as per item No 2 above but with except bricks.

Taking down cement plaster of any description including racking out joints hacking for key scrubbing down with water etc and removing the debris outside the MOD land, complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surface including even and smooth surfaces without using extra cement, complete all as specified and directed.

M&L for applying two coats of cement based paint over a coat of primer including preparation of newly plastered surfaces, complete all as specified and directed.

M&L for complete removal of existing treatment of walls by brooming down or steel wire brushing, scrapping down smoke soot mould moss and efflorescent salts trading oil and greasy spots, filling holes cracks with wall care putty all and applying two coat of cement based paint on wall, complete all as specified and directed.

S&F providing precast cement concrete louvers and jallies 45mm thick (measured solid) of any design as approved by Engg-in-Charge including all mouldings but excluding frame setting in cement mortar 1:4 precast cement concrete jalli type B-0 1:2:4 (12.5mm graded stone aggregate), complete all as specified and directed.

M&L providing cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in bands, copings, bed plates, kerbs including form work, complete all as specified and directed.

Dismantling floor, path, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, including removing the debris out side the MOD land, complete all as specified and directed.

M&L for Cloured Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment including 20mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and directed.

M&L for hard core of gauge not exc 63 mm deposited spread and compacted in layers not exc 15 cm, complete all as specified and directed.

M&L for providing PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate), 75 mm thick as in sub base below pavings, floors, paths etc, complete all as specified and directed.

M&L PCC 25mm thick 1:2:4 type B-1, using 20mm graded stone aggregate and finishing the surface rough and even to receive top layer as under tiles etc, complete all as specified and directed.

M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dense soil, complete all as specified and directed.

S&F in repair chain link fencing including line wires, any mesh size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire, complete all as specified and directed. Note :-The weight of the chain link fencing after arrival at site shall be ascertained by a Board of Officers to be detailed by the Accepting Officer before incorporation in the work.

Dismantling iron work of any description, complete all as specified and directed.

S&F MS angle iron as in posts and struts as in fencing including cutting tops to shape as directed, drilled holes notching for wire etc including all necessary drilling, bolting or riveting etc including fixing of flat iron and horizontal bars round/TMT bars for strenthning of chain link fencing and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.

S&F rolled MS framed work as in doors or gate of angle or other section with gusset plate, rail, brases etc ornamental and intricate design, including either hooks and hinges or steel hanging door fitting to be prepared for hanging and also fastening conforming to Fe 410-W (Gde-E-250) quality-B, complete all as specified and directed.

M&L for preparing of new steel surface of any description not otherwise described over 10cms width or girth and applying 2 coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

S&F in replacement Fibre glass reinforced translucent corrugated sheeting 2mm thick with two corrugations side lap fixed with L-type or J-type in roof, wall etc, complete all as specified and directed.

M&L in repair stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and directed.

M/S DEV ASSOCIATES (BID ID -3149599)