MAINTENANCE_REPAIRS TO STEEL_WOODEN FURNITURE AT INS KALINGA MARCOS E AND NAD BHEEMUNIPATNAM

Amount

M&L for preparation, removing all dents making the surface smooth and applying one coat synthetic enamel paint of approved make, quality and shade on old steel surfaces of Almirah steel large with shelves as per Drg. No.FD-67 (M) complete all as specified and as directed by the Engineer-in-Charge.

All as per item No.1 above but Almirah steel medium with shelves as per Drg. No.FD-67 (M).

All as per item No.1 above but Locker steel as per Drg. No.FD-1029.

All as per item No.1 above but Table office officers steel as per Drg. No.FD-84 (M).

All as per item No.1 above but Table office clerk steel as per Drg. No.FD-84 (M).

All as per item No.1 above but Table office Asst. steel as per Drg. No.FD-84 (M).

All as per item No.1 above but Table typist steel as per Drg. No.FD-84 (M).

All as per item No.1 above but Chair tubular steel with Arms as per Drg No. FD-75 (M).

All as per item No.1 above but Chair tubular steel without Arms as per Drg No. FD-75 (M).

All as per item No.1 above but Stool steel 1'x1'x2' as per Drg. No.FD-81 (M).

All as per item No.1 above but Steel Rack adjustable open type 6 tier as per Drg. No.FD-106 (M).

All as per item No.1 above but Steel Rack adjustable 6 tier as per Drg. No.FD-106 (M).

M&L for removing the existing worned out canning from Chair Dining and re-canning the same with new cane of 2mm wide 0.4mm thick finishing with 4mm cane at order of approved quality and size complete as per drawing No.FD-228 complete all as specified and as directed by the Engineer-in-Charge.

All as per Item No.13 above but for Chair Easy as per drawing No.FD-229 complete all as specified and as directed by the Engineer-in-Charge.

All as per Item No.13 above but for Chair Writing as per drawing No.FD-250 complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, the top of book case wooden, of first class hard wood (Teak) and new prelaminated particle board as per drawing No.FD-237 complete all as specified and as directed by the Engineer-in-Charge

S&F in repairs, wooden legs of bed plywood top with MNF Set of first class hard wood (Teak) of same size and applying two or more coat of French polish to match with the existing surface including prepration of surfaces as per drawing No.FD-246 complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs the 12mm thick plywood top of bed plywood top with fixing of screws approved quality including polishing to match with the existing surface, as per drawing No.FD-246 complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, the head board both sides of bed ply wood with Veneer of approved quality as per drawing No.FD-246 complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, the foot board both sides of bed ply wood with Veneer of approved quality as per drawing No.FD-246 complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, rear wooden legs of chair dining of first class hard wood (Teak) of same size and applying two or more coat of French polish to match with the existing surfaces including preparation of surfaces as per drawing No.FD-279 including hard rubber rings/PVC toes provided at the bottom of the legs complete all as specified and as directed by the Engineer-in-Charge.

All as per item No.21 above but front wooden legs of chair dining as per drawing No.FD-279.

All as per item No.21 above but side wooden rail of chair dining as per drawing No.FD-279.

All as per item No.21 above but wooden stiffeners of chair dining as per drawing No.FD-279.

S&F in repairs, front wooden legs of chair easy of first class hard wood (Teak) of same size and applying two or more coats of french polish to match with the existing surfaces including preparation of surfaces as per drawing No.FD-229 complete all as specified and as directed by the Engineer-in-Charge.

All as per item No.25 above but rear wooden legs of chair easy as per drawing No.FD-229.

All as per item No.25 above but wooden hand rest of chair easy as per drawing No.FD-229.

S&F in repairs, front wooden legs of chair writing of first class hard wood (Teak) of same size and applying two or more coats of french polish to match with the existing surfaces including preparation of surfaces as per drawing No.FD-250 complete all as specified and as directed by the Engineer-in-Charge.

All as per item No.28 above but rear wooden legs of chair wiriting as per drawing No.FD-250.

All as per item No.28 above but wooden hand rest of chair wiriting including drilling holes of canning to match the existing frame work as per drawing No.FD-250 complete all as specified and as directed by the Engineer-in-Charge.

All as per item No.28 above but stiffeners of chair wiriting as per drawing No.FD-250.

S&F in repairs, 6mm thick plywood bottom of chair wooden bottom of approved quality and the same size as per drawing No.FD-225 complete all as specified and as directed by the Engineer-in-Charge

All as per item No.30 but stiffeners of chair wooden bottom as per drawing No.FD-225 complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, locks of almirah medium steel of approved quality as per Drg. No.FD-67 (M) complete all as specified and as directed by the Engineer-in-Charge.

All as per item No.34 above but handle of almirah large/ medium steel as per Drg. No.FD-67 (M) complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, legs of almirah large steel with shelves, of approved quality steel members of same size and applying two coats of synthetic enamel paint over a coat of red oxide primer to match with existing surfaces including preparation of surfaces complete as per Drg. No.FD-67 (M) complete all as specified and as directed by the Engineer-in-Charge.

All as per item No.36 above but legs of almirah medium steel as per Drg. No.FD-67 (M) complete all as specified and as directed by the Engineer-in-Charge..

S&F in repairs, shelves of Almirah steel large with shelves of approved quality steel members of same size and applying two coats of synthetic enamel paint over one coat of red oxide primer to match with the existing surfaces including preparation of surfaces as per Drg. No.FD-67 (M) complete all as specified and as directed by the Engineer-in-Charge.

All as per item No.38 above but shelves of almirah medium steel as per Drg. No.FD-67 (M).

S&F in repairs, back side of almirah large steel with shelves of approved quality steel sheet of same size and applying two coats of synthetic enamel paint over a coat of red oxide primer to match with existing surfaces including preparation of surfaces as per Drg. No.FD-67 (M) complete all as specified and as directed by the Engineer-in-Charge.

M&L for grinding and welding of broken chair tubular steel with or with out arms and bringing to its original shape, applying two coats of synthetic enamel paint over one coat of red oxide primer to match with the existing steel surfaces surface and applying two or more coats of French polish on wooden surfaces including preparation of surfaces as per Drg. No.FD-75 (M) complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, seat of chair tubular steel with arms of same material, quality and size as per Drg. No.FD-75 (M) complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, seat of chair tubular steel with out arms of same material, quality and size as per Drg. No.FD-75 (M) complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, back of chair tubular steel with arms of same material, quality and size as per Drg. No.FD-75 (M) complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, back of chair tubular steel with out arms of same material, quality and size as per Drg. No.FD-75 (M) complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, hand rest of chair tubular steel with arms of same material, quality and size as per Drg. No.FD-75 (M) complete all as specified and as directed by the Engineer-in-Charge.

M&L for removing the existing worned out canning of chair verandah and re-canning the same with new cane of approved quality and size including repairing the broken frame by proper welding and two coats of synthetic enamel paint over one coat of red oxide primer as per Drg. No.FD-254 complete all as specified and as directed by the Engineer-in-Charge.

M&L for repairing the dents/broken frame of teapoy verandah by proper welding and brining the same to the original shape by carrying out petty repairs including two coats of synthetic enamel paint over one coat of red oxide primer as per Drg. No.FD-255 complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, top of teapoy verandah of approved quality of the same size and material as per Drg. No.FD-255 complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, legs of Table office clerk steel of approved quality steel members of same size and quality duly welding or rivetting whereever required and applying two coats of synthetic enamel paint over one coat of red oxide primer to match with existing surfaces as per Drg. No.FD-84 (M) complete all as specified and as directed by the Engineer-in-Charge.

All as per Item No.50 but legs of table office asst. steel as per Drg. No.FD-84 (M).

All as per Item No.50 but legs of table office typist steel as per Drg. No.FD-84 (M).

All as per Item No.50 but legs of table office officers steel as per Drg. No.FD-84 (M).

S&F in repairs, drawer of table office clerk steel of approved quality steel members of same size and quality duly welding or rivetting wherever required and applying two coats of synthetic enamel paint over one coat of red oxide primer to match with the existing surfaces as per Drg. No.FD-84 (M) complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, top of table office officers steel of new prelaminated particle board conforming to the existing quality and size including teak wood beading as per Drg. No.FD-84 (M) complete all as specified and as directed by the Engineer-in-Charge.

All as per Item No.55 but top of table office clerk steel as per Drg. No.FD-84 (M).

All as per Item No.55 but top of table office asst. steel as per Drg. No.FD-84 (M).

All as per Item No.55 but top of table office typist steel as per Drg. No.FD-84 (M).

M&L for removing dents of existing dislocated/ disorder drawers of table office clerk steel and bring it to good condition including petty repairs duly providing locking system (Lock&Keys) and applying two coats synthetic enamel paint over one coat of red oxide primer to match with the existing surfaces as per Drg. No.84 (M) complete all as specified and as directed by the Engineer-in-Charge.

All as per Item No.59 but table office officers steel as per Drg. No.FD-84 (M).

All as per Item No.59 but table office asst. steel as per Drg. No.FD-84 (M).

S&F in repairs, top of peg table of prelaminated particle board of same size as per Drawing No.236 (M) complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, legs of stool dressing of first class hard wood (Teak) of same size including provision of hard rubber rings/PVC toes to the bottom of all legs with screw and applying two or more coats of French polish to match with the existing surfaces including preparation of surfaces as per Drawing No.252 complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, materials like tapestry cloth, springs, cotton, Hessian cloth, broken wooden parts etc. including polishing of sofa set five seater conforming to the same quality, material and size as per Drawing No.FD-258 & FD-281 complete all as specified and as directed by the Engineer-in-Charge.

All as per item No.64 above but sofa set four seater as per drawing Nos.FD-234 & FD-281.

S&F in repairs, top of table bed side conforming to the same quality and size as per drawing No.FD/E6/MAP/15 complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, right/left side of the table bed side and replacing the same items conforming to the same quality and size as per drawing No FD/E6/MAP/15 complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, front door and knobs of table bed side conforming to the same quality and size as per drawing No.FD/E6/MAP/15 complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, 6mm thick plywood back side of table bed side conforming to the same quality and size as per drawing No.FD/E6/MAP/15 complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, prelaminated particle board top of tea poy conforming the same quality and size as per drawing No.FD-232 complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, legs of tea poy of first class hard wood (teak) conforming the same quality and size and applying two or more coats of French polishing to match with the existing surfaces including preparation of surfaces as per drawing No.FD-232 complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, prelaminated particle board top of table centre conforming the same quality and size as per drawing No.FD-235 complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, legs of table centre conforming the same quality and size as per drawing No.FD-235 complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, prelaminated particle board top of table with drawer (900x600mm) conforming to the same quality and size as per drawing No.FD-224 complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, prelaminated particle board top of table dining 8 persons conforming to the same quality and size as per drawing No.FD-239 (M) complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, prelaminated particle board top of table dining 6 persons conforming to the same quality and size as per drawing No.FD/MAP-II/03 complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, plywood & laminated sheets including polishing etc. of table dressing ladies conforming to the same quality, material and the size as per drawing No FD-252 complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, mirror of table dressing ladies of the same size and approved quality as per drawing No.FD-252 complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, plywood & laminated sheets including polishing etc. of table dressing gents conforming to the same quality, material and the size as per drawing No.FD-230 (M) complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, prelaminated particle board top of table office officers laminated top of size 1800x900 conforming to the same quality, material and size as per drawing No.FD-84 (M) complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, prelaminated particle board top of table typist wooden conforming to the same quality, material and the size as per drawing No DB-4020 complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, prelaminated particle board top of table writing conforming to the existing quality and size including teak wood beading as per Drg. No.FD-283 complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, shelves of steel shelving cabinet large adjustable type of approved quality steel member of same size and applying two coats of synthetic enamel paint over one coat of red oxide primer to match with the existing surfaces complete all as specified and directed by Engineer-in-Charge.

All as per item No.83 above but steel shelving cabinet small adjustable type.

All as per item No.83 but steel rack adjustable 3 tier as per Drg. No.FD-106 (M).

All as per item No.83 but steel rack adjustable 4 tier as per Drg. No.FD-106 (M).

All as per item No.83 but steel rack adjustable closed type 1875x900x500mm as per Drg. No.FD-106 (M).

S&F in repairs, top of table office officers conforming to the same quality, material and the size as per drawing No.FD-1003 complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, prelaminated particle board hand board of Chair school with hand board conforming to the same size, quality and fixed with teak wood beading as per Drg. No.FD/E6/MAP/05 complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, PVC seat of Chair school with hand board conforming to the same size, quality and fixed with teak wood beading as per Drg. No.FD/E6/MAP/05 complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, plastic seat of Chair Verandah of approved quality, conforming to the same size, quality and fixed with screws as per Drg. No.FD/E6/MAP11 complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, plastic back of Chair Verandah of approved quality, conforming to the same size, quality and fixed with screws as per Drg. No.FD/E6/MAP11 complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation, removing all dents making the surface smooth and applying two coat synthetic enamel paint over one coat of red oxide primer of approved make, quality and shade on exposed steel surfaces of Chair school with hand board as per Drg. No.FD/E6/MAP/ 05 complete all as specified and as directed by the Engineer-in-Charge.

All as per item No.93 above but chair verandah as per Drg. No.FD/E6/MAP/11.

S&F in repairs, short rail of charpoy GI pipe 32mm dia. on both ends as shown on drawing No.FD-220 complete all as specified and as directed by the Engineer-in-Charge.

All as per item No.95 above but long rail of charpoy GI pipe 32mm dia. as shown on drawing No.FD-220.

S&F in repairs, legs of charppoy GI pipe 32 mm dia. with 3mm thick MS plate welded at bottom of leg including threading on top and painting of clamps with two coats of sythetic enamel paint over one coat of red oxide zinc chrome primer all as shown on drawing No.FD-220 complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, three way GI elbow 32mm dia. medium grade (ISI marked) complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, check nuts of 32mm dia. 6mm thick of best quality complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, second class hard wood bush suitable for the legs of Charppoy GI pipe 32 mm dia. round type fixed with nail/screws all as shown on drawing No.FD-220 complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, cushion with cover of chair executive type revolving/tilting with arms all as per Drg. No.HFD-2047 complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, wheels of chair executive type revolving/tilting with arms all as per Drg. No.HFD-2047 complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, materials like new timber, plywood sheets and knobs of side board and replacing the same item along with polishing confirming to same quality, materials and size complete as per Drawing No FD-241 complete as specifed and directed by Engineer-in-Charge.

S&F in repairs, new cushion seat of chair dining, approved make and quality all as per drawing No.FD/E6/ MAP/10 complete as specifed and directed by Engineer-in-Charge.

S&F in repairs, new cushion seat of chair dining officers, approved make and quality all as per drawing No.FD/MAP-II/04 complete as specified and directed by Engineer-in-Charge.

S&F in repairs, new platic seat 4mm thick with holes of chair dining JCO/ ORS, approved make and quality, fixed with screws complete all as per drawing No.FD/MAP-II/05 as specified and directed by Engineer-in-Charge.

S&F in repairs, top of bench steel with cushioned top, of approved make and quality plywood complete all as per Drg No.FD-78 (M) as directed by the Engineer-in-Charge.

M&L for repairing the dents/broken frame of rack shoe steel by proper welding and brining the same to the original shape by carrying out petty repairs like replacement of steel parts including two coats of synthetic enamel paint over one coat of red oxide primer all as per Drg No.FD/E6/MAP/02 complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, 1mm thick laminated sheet brown colour approved quality fixed with fevicoal complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, 1mm thick veneer sheet of approved quality and pattern fixed with fevicoal complete all as specified and as directed by the Engineer-in-Charge.

POLISHING OF WOODEN FURNITURES: M&L for cleaning the surface of wooden furniture by sand papering and applying putty where ever required to make the surface smooth and again sand papering and there after applying two or more coats of French polish using with malmal cloth to obtain glossy finish including finishing smooth the hidden /un-exposed surfaces by sand papering and applying one coat of wood primer as preservative etc. for Hat stand with mirror as per drawing No. FD-1110 complete all as specified and as directed by the Engineer-in-Charge.

All as per item No.111 above but Rack Map Wooden as per drawing No. FD-2.

All as per item No.111 above but Chair Dinning as per drawing No. FD-279.

All as per item No.111 above but Chair Easy as per drawing No. FD-229.

All as per item No.111 above but Chair Writing as per drawing No. FD-250.

All as per item No.111 above but Table Dining 8 persons as per drawing No. FD-239.

All as per item No.111 above but Table Dressing Ladies with Mirror as per drawing No. FD-251.

All as per item No.111 above but Table Dining 6 persons as per drawing No. FD-239.

All as per item No.111 above but Table Dressing Gents with Mirror as per drawing No. FD-230.

All as per item No.111 above but Stool Cushioned 530mm as per drawing No. FD-81.

All as per item No.111 above but Stool Library as per drawing No. FD-123 (M).

All as per item No.111 above but Table 1520x860x 760mm as per drawing No. FD-139 (M).

All as per item No.111 above but Table Center as per drawing No.FD-235.

All as per item No.111 above but Peg Table as per drawing No.FD-236.

All as per item No.111 above but Table Card as per drawing No.FD-91(M) revised.

All as per item No.111 above but Table 1830x760x 1905mm as per drawing No.FD-239.

All as per item No.111 above but Table wooden 1600x800x760mm as per drawing No. FD-43(M).

All as per item No.111 above but Bin Soiled Linen Large as per Drg. No.FD-244.

All as per item No.111 above but Wooden Cabinet 1300x750x800mm as per drawing No. MISC-32.

All as per item No.111 above but Chair 'D' Man as per drawing No. FD-3(M).

All as per item No.111 above but Bed Ply wood Top as per drawing No. FD-246.

All as per item No.111 above but Side Board as per drawing No. FD-241.

All as per item No.111 above but Stool Dressing as per drawing No. FD-252.

All as per item No.111 above but Bed Side Table of size 450x450x450mm as per drawing No. FD-248.

All as per item No.111 above but Table Study of size 1200x600x750mm as per TP.

All as per item No.111 above but Chair Study as per TP.

All as per item No.111 above but Table Corner of size 450x450x400mm as per TP.

All as per item No.111 above but Table Corner of size 900x525x400mm as per TP.

All as per item No.111 above but Sofa Single Seater as per TP.

All as per item No.111 above but Dressing Counter of size 500x1350x300mm with Mirror as per TP.

All as per item No.111 above but Wardrobes of size 1050x500x2100mm as per TP.

All as per item No.111 above but Book Shelf with Sliding Glass Door of size 900x400x750mm as per TP.

All as per item No.111 above but Board Notice 900x 600mm as per Drg. No.SK/CWE/37.

All as per item No.111 above but Board Notice 1830x 1220mm as per Drg. No.FD-99 (M).

All as per item No.111 above but Board Notice 2440x 1220mm as per Drg. No.FD-99 (M).

All as per item No.111 above but Teapoy Wooden as per drawing No.FD-232/FD-278.

All as per item No.111 above but Table with Drawer 900x600mm as per drawing No.FD-283.

All as per item No.111 above but Table without Drawer 900x600mm as per drawing No.FD-231 (M).

All as per item No.111 above but Table Dining 4 Persons as per drawing No.FD-MAP-II/03.

M/s.Kissenlal Daga

S A R CONSTRUCTIONS

singh traders

Chitturi Associates