Construction of Giran Khad Nodkut Jarpal Upper Amlela to Amlela road joining Amlela Ghar Jarot road km. 0/0 to 5/500 (Portion 1/795 to 3/665 Phase-II) under Nabard RIDF-XXVI in Tehsil Jawali District Kangra (HP) under Nabard RIDF-XXVI

Amount

Excavation in hilly area in all heights and depths and in all kind of soil by manual/mechanical means including saturated soil comprising of ordinary soil, soft rocks, hard rocks, chiseling/ wedging out of rock ( where blasting is prohibited) and their intermediate classification of soil complete including setting out true to the required line, grades cutting and trimming of side slopes , camber, super elevation and level shown as per the drawing and as directed by the Engineer-in- Charge at site according to the M.O.R.D. technical specification section 1600 and 300 and sorting out usefull materials and stacking the same in all leads and lifts in acquired width of the road and transportation of un-useful material for filling in road ways, camber, embankments for grade improvements and disposal of all surplus material to the approved dumping sites through all modes of transporation including head load or animals transport or by mechanical means along with its leveling fine dressing and carriage of machineries, materials, tools equipments and safety measures and other incidential necessary to complete the work by mechanical means / labour if required. All useful materials such as stone, shingles, aggregates, sand and slates etcetera shall be sorted out and stacked in proper stack. Recovery of stones to the tune of 951.24 cubic metre quantity at the rate of Rupees 300/- (Rupees three hundred) only per Cubic Metre shall be effected from the contractor running bills on pro-rata basis as per quantity actually executed. Any loss to the public / private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be compensated by him in all cases. The rate in including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Construction of embankment with approved materials deposited at site obtained from approved sources or from road way cutting and excavation from drains and foundations of all other structures, graded and compacted in 200mm (Two hundred milimetres) thickness with three wheel roller 80-100 (eighty-hundred) KN static weight roller to meet the requirement of tables 300.1 and 300.2 as per M.O.R.D. technical specification section 1300 and 1600 including carriage of materials with all leads, lifts and other incidental and as per the entire satisfaction and direction of the Engineer- In –Charge. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drains and parapets etcetera and other similar structure in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock chiseling /wedging out rocks ( Where blasting is prohibited) complete in accordance with the line and dimensions shown in the drawings as per M.O.R.D. technical specification section 300 and 1600 and as per direction of the Engineer- In – Charge including setting out shoring and bracing , removal of stumps and other deleterious materials and disposal of materials upto any lead and upto any lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers but exceeding 150mm (One hundred fifty milimetres) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water ) upto any depth and any quantum of water including cleaning of slush which may arrise out during dewatering as per entire satisfaction and direction of Engineer-in-Charge. Including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete for all type of structure nominal mix 1:4:8 ( One cement : four sand : eight graded crushed/ broken stone aggregate 40mm ( forty millimeter) nominal size on ground or under water including curing complete including pumping or bailing out water , dewatering (surface and sub soil water) and removal of slush as required at site which may arise at the time of laying concrete complete for all heights/ depths including the cost of form work in retaining wall, breast wall etcetera as per drawings and M.O.R.D. technical specification section 800,900, 1200 and 1600 as per the direction and entire satisfaction of Engineer-in-Charge Including carriage of material within all leads, lifts and other incidental . The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Back filling with granular material behind abutments, wing wall return walls, and retaining walls/ Breast walls complete as per drawing and MORD technical specifications section 1200 and 1600 as per directions and entire satisfaction of Engineer-in-Charge, including carriage of materials within all leads and lifts, other incidental. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing 100mm (One Hundred millimeter) dia ISI marked PVC pipe weep holes in brick masonry/ stone masonry, plain/reinforced concrete abutment, wing wall, return wall and retaining/breast walls extending through the full width of the structures with slope of 1(V): 20(H) towards draining face complete as per drawing and M.O.R.D. technical specifications section 700, 1200 and as per direction and entire satisfaction of Engineer – in- Charge, including the cost of collar etcetera complete, including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain concrete in open foundation for all type of structure complete grade M-10 ( M Ten) nominal mix 1:3:6 ( One cement : three sand : six graded crushed/ broken stone aggregate 40mm ( Forty millimeter) nominal size on ground or under water including curing complete including pumping or bailing out water , dewatering removal of slush as required at site which may arise at the time of laying concrete complete for all heights/ depths and curing complete including the cost of form work as per drawings and M.O.R.D. technical specification section 800, 900 and 1200 as per the direction and entire satisfactions of Engineer-in-Charge Including carriage of material within all leads, lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete M-15 (M-Fifteen) nominal mix 1 : 2 ½ : 5 ( one cement : two & half sand : five graded crushed /broken stone aggregate 40mm ( forty millimetre) nominal size) on ground or under water including pumping or bailing our water/ dewatering surface and sub soil water and removal of the slush which may arise at the time of laying concrete for all heights/ depths in for (concrete cradle) type-A bedding as per drawings and M.O.R.D. technical specifications section 800,900 and 1100 including the cost of form work and curing complete including carriage of materials within all leads, lifts and other incidental or as per the entire specification and directions of Engineer-in-Charge . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete M-15 (M-Fifteen) nominal mix 1 : 2 ½ : 5 ( one cement : two & half sand : five graded crushed /broken stone aggregate 40mm ( forty millimetre) nominal size) in sub structure such as toe wall and parapets etcetera as per drawings and M.O.R.D. technical specifications section 800, 900 and 1200 including the cost of form work and curing complete including carriage of materials with in all leads, lifts and other incidental or as per the entire satisfaction and directions of Engineer-in-Charge . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibarted plain cement concrete grade M-20 (M-twenty) design mix with cement contents not less than 330kg (three hundred thirty kilogrammes) per cubic metre with 20mm (twenty milimetres) nominal size graded crushed stone aggregate in sub structure as per drawing and MORD technical specifications section 800, 900 and 1200 including the cost of form work in abutmentetcetera and curing complete including hauling of materials within all leads, lifts and other incidental as per the entire satisfaction and directions of the Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for reinforced concrete in sub structure design mix R.C.C. grade M-20 (M-twenty) with graded crushed stone aggregate 20mm (Twenty milimetres) nominal size having cement contents not less than 330kg (Three hundred thirty kilogrammes) per cubic metre and curing complete for all heights/ depths including the cost of form work but excluding the cost of reinforcement for reinforced concrete work in bed block, dirt wall, as per drawings and M.O.R.D. technical specifications section 800, 900 and 1200 complete including carriage of materials within all leads, lifts and other incidental and as per the entire specification and directions of Engineer-in-Charge . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete in super structure as per drawing and M.O.R.D. technical specification section 800, 900 and 1400 R.C.C. Grade M-25 (M-twenty five) design mix cement contents not less than 400 kg. (four hundred kilogrammes) per cubic metre with 20mm ( twenty millimeter) nominal size graded crushed stone aggregate and curing complete including the cost of form work but excluding the cost of reinforcement for reinforced concrete work in deck slab, wheel guard etcetera as per the direction and entire satisfactions of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Supplying fitting and placing HYSD bars reinforcement in super structure complete as per drawing and MORD technical specification section 1000 and 1400 including cutting, bending binding and placing in position complete in all respect including cost of binding wire as per directions and entire satisfactions of Engineer-in-Charge, including carriage of materials with in all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Supplying fitting and placing HYSD bars reinforcement in sub structure complete as per drawing and M.O.R.D. technical specifications section 1000 and 1200 including cutting, bending, binding and placing in position complete in all respect including cost of binding wire of as per the direction and entire satisfaction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Construction of reinforced cement concrete mechanically mixed and vibrated railing of Grade M-25 (M- twenty five) design mix with cement content not less than 400kg (four hundred kilogrammes) per cubic metre using 20mm (twenty milimetres) nominal size graded crushed stone aggregate with cast insitu vertical post and precast horizontal post (Top Middle and Bottom) as per drawing true to line and grade and curing complete, tolerance of vertical railing post not to exceed 1 in 500 (one in five hundred) centre to centre spacing between vertical post not to exceed 2000mm (Two thousand millimeter)leaving adequate space between vertical post for expansion complete including the cost of reinforcement and form work as per drawing and MORD technical specification section 800, 900, 1000 and 1200 complete in all respect as per direction and entire satisfactions of Engineer-in-Charge, Including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing drainage spouts complete with 100mm (One hundred millimeter) dia galvanized mild steel down pipe corrosion resistant structural steel grating complete as per drawing and M.O.R.D. technical specifications section 1400 and as per direction and entire satisfaction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying filter media with granular crushed aggregate as per specification to a thickness of not less than 600mm ( six hundred millimeter) with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing walls return walls and retaining / breast walls to the full height compacted to firm condition complete as per drawing and M.O.R.D. technical specifications section 1200 and 1600 and as per direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidential . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete designed mix RCC grade M-30 (M-thirty) with cement contents not less than 430 kg. (Four hundred thirty kilogrammes) per cubic metre with graded crushed stone aggregate 20 mm ( Twenty millimeter) nominal size and curing complete in wearing course including cost of form work and reinforcement complete as per drawing and M.O.R.D. technical specification section 800, 900, 1000 and 1400 as per the direction and entire satisfactions of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete in open foundation for all type of structures Grade M-20 (M-twenty) nominal mix 1:2:4 (One cement : two sand : four graded crushed/ broken stone aggregate 40mm (Forty milimetres) nominal size on ground or under water including pumping or bailing out water / dewatering, removal of slush as required at site which may arise at the time of laying concrete complete for all heights/ depths including cost of form work in flooring as per Drawing and M.O.R.D. technical specification section 800, 900 and 1200 as per entire satisfaction and directions of the Engineer-in-Charge including haulage of material within all leads and lifts and other incidental charges. The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete Grade M-25 (M-Twenty five)designed mix with cement contents not less than 400 kg (four hundred kilogrammes) per cubic metre with 20 mm ( Twenty millimeter) nominal size graded crushed stone aggregate and curing complete in approach slab including the cost of reinforcement and form work complete as per drawing and M.O.R.D. technical specification section 800, 900, 1000 and 1400 including carriage of materials within all leads, lifts and other incidental as per the direction and entire satisfaction of Engineer-in-Charge The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete Grade M-15 (M-Fifteen) nominal mix 1:2½:5 (one cement : two and half sand : five graded stone aggregate 40mm (forty milimetres) nominal size) levelling course below approach slab as per drawing and MORD technical specifications section 800, 900 and 1200, including carriage of materials within all leads, lifts and other incidental as per the direction and entire satisfaction of Engineer-in-Charge The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying(to level or slope) 900mm dia (Nine hundred milimetre diameter) reinforced cement concrete heavy duty non pressure pipe IS class NP3 for culverts on First class bedding or granular material in single row including fixing collars with cement mortar 1:2 (One cement : two sand) and curing complete but excluding the cost of excavation, protection work, back filling, concrete bedding and masonry work in head walls and parapets as per Drawing and MORD technical specification section 1100, including hauling of material within all leads, lifts and other incidental and as per the entire satisfaction directions of the Engineer-in-Charge. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain concrete in open foundation for structure like drain complete of grade M-10 ( M- Ten) nominal mix 1:3:6 ( One cement : three sand : six graded crushed/ broken stone aggregate 20mm ( Twenty millimeter) nominal size on ground or under water and curing complete including pumping or bailing out water , dewatering removal of slush as required at site which may arise at the time of laying concrete complete for all heights/ depths including the cost of form work as per drawings and M.O.R.D. technical specification section 800, 900 and 1200 as per the direction and entire satisfaction of Engineer-in-Charge Including carriage of material within all leads and lifts other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Loosening of the ground upto a level of 300mm (Three hundred milimetres) below the sub grade level watered, graded with motor grader and compacted in layers to meet requirement of tables 300.1 and 300.2 with power road roller 8-10 Tonne (eight desh ten tonne) capacity for sub grade construction as per M.O.R.D. technical specification section 300, and as per the entire satisfaction and direction of Engineer-in-Charge, including carriage of materials within all leads and lifts other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Construction of sub grade and earthen shoulders with approved materials obtained from borrow pits with in all leads and lifts transporting to site, spreading grading to required slope and compacted with three wheel 80-100 (eighty-hundred) KN static rollerto meet requirement of table 300.1 and 300.2 as per M.O.R.D. technical specifications section 400, including hauling of materials in all leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying granular sub base by providing well graded material as per table 400.1 spreading in uniforms layers with tractor mount grader on prepared surface mixing by mix in place method with rotavator at OMC and compacting with smooth three wheel roller 80-100 (eighty-hundred KN static roller to achieve the desired density complete as per MORD technical specifications section 400 for grading-I material including carriage of materials within all leads, lifts other incidental . The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing, laying spreading and compacting by mechanical means stone aggregate/ specified size to water bound Macadam specification including spreading in uniform thickness hand packing, rolling with three wheel 80-100 (Eighty/Hundred) K.N. static Road roller in stages to proper grade and camber including applying and brooming stone screening type-B of size 11.2mm (eleven point two milimetres) for Grading-II at the rate of 0.20 (zero point two zero cubic metre per 10 sqmt (Ten square metre) of road surface and binding material of approved quality at the rate of 0.06 (zero point zero six) cubic metre per 10sqmt (ten square metre) of road surface to fill up the interstices of course aggregate, watering and compacting to the required density grading –II 63mm to 45mm ( Sixty three millimetres to forty five millimetres) size 75mm (Seventy Five millimetres) compacted thickness as per M.O.R.D. technical specifications section 400 including hauling of material within all leads, lifts as per the entire satisfaction and direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing, laying spreading and compacting by mechanical means stone aggregate/ specified size to water bound Macadam specification including spreading in uniform thickness hand packing, rolling with three wheel 80-100 (Eighty/Hundred) K.N. static Road roller in stages to proper grade and camber including applying and brooming stone screening type-B of size 11.2mm (eleven point two milimetres) for Grading-III at the rate of 0.18 cum ( zero point one eight cubic metres) per ten square metres, to fill up the interstices of course aggregate, watering and compacting to the required density grading –III 53mm to 22.4mm ( fifty three millimetres to twenty two point four millimetres) size 75mm (Seventy Five millimetres) compacted thickness as per M.O.R.D. technical specifications section 400 including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government.

Providing and applying primer coat with BITUMEN emulsion (SS-1) on the prepared surface of granular base including cleaning of road surface with Hydraulic brooms and spraying primer with bitumen emulsion pressure distributer at the rate of 0.85 kg (zero point eight five kilograme) per square metre using mechanical means as per M.O.R.D. technical specifications section 500 as per the entire satisfaction and direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and applying tack coat with bitumen emulsion (RS-I) using emulsion distributor at the rate of 0.275 kgs. (Zero decimal two seven five kilogrammes) per square metre on the prepared granular surfaces treated with primer and cleaned with hydraulic broom as per MORD technical specification section 500 as per the entire satisfaction and direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing laying and rolling of open graded premix carpet of 20mm ( twenty millimeter) compacted thickness, composed of 13.2mm ( thirteen decimal two millimeter) to 5.6mm ( five decimal six millimeter) aggregate at the rate of 0.27 cubic metre (Zero point two seven cubic metre) mixed with Bitumen VG-10 (Viscosity grade- ten) at the rate 14.60 Kilograme (fourteen point six zero kilograme) per ten square metre of road surface to the required line grade and level to serve as wearing course on a previously prepared base, including mixing and heating binder and aggregate in Hot Mix Plant of 30/40 (Thirty / Forty) tonne per hour capacity, transporting mixed material with tipper and laying with paver finisher to the required grade and camber and rolling with a three wheel 80-100 (Eighty-Hundred) KN static road roller finished to required level and grades to be followed by seal coat complete as per M.O.R.D. technical specifications section 500 as per the entire satisfaction and direction of Engineer – in- Charge excluding the cost of tack coat and seal coat including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying seal coat type-B for sealing the voids in a bituminous surface laid to the specified level, grade and cross falls using 0.06 ( zero point zero six) cubic metre of fine aggregate per 10 Sqm. ( Ten square metre) premixed with VG-10 (Viscosity grade ten) bitumen binder at the rate of 6.8 kg (six point eight zero kilograme) per ten square metre of road surface heated in Hot Mix plant and laying manually of mixed material and rolling with Three Wheel road roller 8-10 ( eight to ten) tonne capacity) as per MORD technical specification section 500 and as per the direction and satisfaction of Engineer-in-Charge, including carriage of material labour and equipment required to execute the work to the site of work complete in all respect . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

SEWA SINGH

Ravinder Kumar

Dinesh Construction Works

V S SAINI