Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.9 LAccepted-AOC | ₹6.9 L | L1 | Accepted-AOC L1 |
| 2 | L2₹6.9 LSame as L1Rejected-Finance | ₹6.9 LSame as L1 | L2 | Rejected-Finance L2 |
| 3 | L3₹7.2 L+₹34,674.24 (5.05%)Rejected-Finance R 40 VIKAS MARG SAKAR PUR DELHI 92 | ₹7.2 L+₹34,674.24 (5.05%) | L3 | Rejected-Finance L3 |
| 4 | L4₹7.2 L+₹34,674.24 (5.05%)Rejected-Finance | ₹7.2 L+₹34,674.24 (5.05%) | L4 | Rejected-Finance L4 |
| 5 | L5₹7.5 L+₹62,882.20 (9.15%)Rejected-Finance | ₹7.5 L+₹62,882.20 (9.15%) | L5 | Rejected-Finance L5 |
Tender Value
₹9.4 L
EMD Value
₹19,000
Closing Date
23 Apr 2026, 10:45 amClosed
Ex. Engineer(Elect.)/CNZ
C-Block, Defence Colony, New Delhi 110024
Installation of Semi High Mast Poles with LED Lighting in Sangam Vihar, Ward No. 168 (Central Zone)
2026_MCD_275172_1
EE(Elect.)/CNZ/2026-27/02-08
Open Tender
Electrical Works
Percentage
90 days
Ward 168
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
₹19,000
20 Jul 2026
20 Apr 2026
23 Apr 2026
20 Apr 2026
23 Apr 2026
20 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Meter long etc. with charcoal/ coke and salt as required. | 4 | nos. | - | - |
| 2 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. | 20 | PM | 287 | ₹5,740 |
| 3 | Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size in the existing RCC/HUME/METAL pipe as required. Up to 35 sqmm | - | PM | 47 | - |
| 4 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Up to 35 sqmm | - | PM | 36 | - |
| 5 | Supplying and fixing of light class G.I. pipe of 50 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required. | 4 | nos. | - | - |
| 6 | S/L of following size DWC HDPE Pipe ISI marked along with all accessories like socket ,bend ,couplers etc.conforming to IS 14930 ,part II complete with fitting and cutting ,jointing etc .direct in ground (75 cm below ground level )including excavation and refilling the trench but excluding sand cushioning and protective covering etc, complete as required (a)63mm dia (OD-63mm ID -51mm nominal ). | 175 | PM | 289 | ₹50,575 |
| 7 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.63 mm dia (OD-63 mm & ID-51 mm nominal) | 40 | PM | 136 | ₹5,440 |
| 8 | Supply of XLPE insulated and PVC sheathed Al. Conductor Armored cable 1.1 KV grade conforming to IS 7098 of 2x6 sqmm as reqd. | 320 | PM | 95 | ₹30,400 |
| 9 | Providing and laying of HDPE pipe of 40 mm outer dia with PN 4 rating by hand moling/ manual method confirming to IS 4984. | 100 | meter | 592 | ₹59,200 |
| 10 | Fabrication, Supplying, Installation, testing, Commissioning of 12 metres semi high mast System with its accessories, Mast shaft shall be in one section, hot dip galvanized 4mm thick(Single dip) Inside & out sides &sultable for wind velocity as per IS 875 part3.There shall be in longitudinal seam weld per section and No circumferential weld. It should also included accessories For seml High Mast head frame,2 point suspension system,5 X 2.5 sqmm Copper conductor with steel wire rope 5mm dia. (7/19 construction) single drum winch ,galvanized lantern carriage arrangement suitable for 4/6 Nos. Flood Light luminaries symmetrically and its control gears boxes and lighting finial,the mast shall have integral type manual tool mounted at the base compartment of its raising and lowering operation with foundation bolts and Anchor plate and control panel housing suitable RCC (1:2:4) shallow foundation of size 1m(L) x 1m wide and 2m deep i/c excavation of earth, providing cutting, bending and placing in position, reinforcement of cold twisted bars of 12 mm dia -2100mm long (approx.) 16 nos.and reinforcement of cold twisted bar of 8 mm dia 3700 mm (approx.) 13 nos. (with 150 mm spacing) as required with positioning of foundation bolts and providing DWC HDPE pipe for cable entry & exit as required for the semi high mast considering the safe soil bearing capacity at site as 10T/sqm at 2mts. Depth with all material i/c 4 Nos S.P MCB,1 . Double pole 16Amp. MCB etc as reqd. Logo/Name of manufacturer shall be either embossed or Rivited plate on the pole. Galvanization as per relevant IS. | 4 | nos. | 1,54,138 | ₹6,16,552 |
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 12.40 MB
Tendernotice_2.pdf
PDF • 5.98 MB
Tendernotice_3.pdf
PDF • 0.59 MB
Tendernotice_4.pdf
PDF • 0.10 MB
BOQ_321413.xls
BOQ • 2.69 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .