Renovation of Executive flat complex, Sec-4, bounda wall development of Park under the work of Various Civil Electrical Water Supply Horticu

D Total Amount i/c GST (DSR + Non-DSR):- 74,500,628

BILL OF QUANTITY

Renovation of Executive flat complex, Sec-4, boundary wall & development of Park under the work of Various Civil, Electrical, Water Supply, Horticulture, Hospitality jobs required for Hockey World Cup-2023

and other jobs in Steel Township at Rourkela (Odisha).

SL No DSR/MR ITEM DESCRIPTION Unit Qty RATE AMOUNT

1 2.8 Earth work in excavation by mechanical means (Hydraulic excavator) /

manual means in foundation trenches or drains (not exceeding 1.5 m

in width or 10 sqm on plan), including dressing of sides and ramming

of bottoms, lift upto 1.5 m, including getting out the excavated soil and

disposal of surplus excavated soil as directed, within a lead of 50 m.

2.8.1 All kinds of soil Cum 696.00 302.22 210343.01

2 2.25 Filling available excavated earth (excluding rock) in trenches, plinth,

sides of foundations etc. in layers not exceeding 20cm in depth,

consolidating each deposited layer by ramming and watering, lead up

to 50 m and lift upto 1.5 m.

3 1.0 CARRIAGE OF MATERIAL

1.1 By Mechanical Transport including loading, unloading and stacking

4 MR-1 Supplying and filling in plinth with sand under floors, including

watering, ramming, consolidating and dressing complete.

5 4.1 Providing and laying in position cement concrete of specified grade

excluding the cost of centering and shuttering - All work up to plinth

4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources

: 8 graded stone aggregate 40 mm nominal size derived from natural Cum 84.00 6664.95 559855.43

6 4.1 Providing and laying in position cement concrete of specified grade

excluding the cost of centering and shuttering - All work up to plinth

4.1.3 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources

: 4 graded stone aggregate 20 mm nominal size derived from natural Cum 10.00 7759.71 77597.12

7 5.1 Providing and laying in position specified grade of reinforced cement

concrete, excluding the cost of centering, shuttering, finishing and

reinforcement - All work up to plinth level :

5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural

sources : 3 graded stone aggregate 20 mm nominal size derived from Cum 176.00 8812.28 1550961.66

natural sources)

8 5.2 Reinforced cement concrete work in walls (any thickness), including

attached pilasters, buttresses, plinth and string courses, fillets,

columns, pillars, piers, abutments, posts and struts etc. above plinth

level up to floor five level, excluding cost of centering, shuttering,

finishing and reinforcement :

5.2.1 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural

sources : 3 graded stone aggregate 20 mm nominal size derived from Cum 59.00 10730.68 633109.98

natural sources).

5.9 Centering and shuttering including strutting, propping etc. and removal

9 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete Sqm 1267.00 324.45 411074.76

10 5.9.3 Suspended floors, roofs, landings, balconies and access

11 5.9.4 Shelves (Cast in situ) Sqm 1.00 807.62 807.62

12 5.9.5 Lintels, beams, plinth beams, girders, bressumers and

13 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts Sqm 450.00 847.33 381300.67

14 5.22/ Steel reinforcement for R.C.C. work including straightening, cutting,

5.22A bending, placing in position and binding all complete upto plinth level./

Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete above plinth level

5.22.6/ Thermo-Mechanically Treated bars of grade Fe-500D or more.

15 6.36 Brick work with modular extruded brunt fly ash clay sewer bricks

(Conforming to IS: 4885 ) in cement mortar 1:4 (1 cement : 4 Coarse

sand) in foundation and plinth :

6.36.1 Cement Mortar 1:4 ( 1 cement : 4 coarse sand) Cum 10.00 6878.45 68784.52

16 6.32 Brick work with clay flyash F.P.S. (non modular) brick of class

designation 7.5 in superstructure above plinth level up to floor five

6.32.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 287.00 8629.70 2476723.39

17 13.4 12 mm cement plaster of mix :

18 13.6 20 mm cement plaster of mix :

19 13.87 White washing with lime to give an even shade :

13.87.1 Old work (two or more coats) Sqm 1000.00 20.02 20017.86

BILL OF QUANTITY

Renovation of Executive flat complex, Sec-4, boundary wall & development of Park under the work of Various Civil, Electrical, Water Supply, Horticulture, Hospitality jobs required for Hockey World Cup-2023

and other jobs in Steel Township at Rourkela (Odisha).

SL No DSR/MR ITEM DESCRIPTION Unit Qty RATE AMOUNT

20 13.43 Applying one coat of water thinnable cement primer of approved

brand and manufacture on wall surface :

13.43.1 Water thinnable cement primer Sqm 4000.00 67.90 271610.71

21 13.48A Finishing walls with 100% Premium acrylic emulsion paint having VOC

less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali &

fungal resistance, dirt resistance exterior paint of required shade

(Company Depot Tinted) with silicon additives

13.48A.1 New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and

including priming coat of exterior primer applied @ 0.90 litre/10 sqm. Sqm 4000.00 162.72 650896.43

22 13.50 Applying priming coat:

13.50.1 With ready mixed pink or Grey primer of approved brand and

manufacture on wood work (hard and soft wood)

23 13.61 Painting with synthetic enamel paint of approved brand and

manufacture to give an even shade :

13.61.1 Two or more coats on new work Sqm 98.00 138.49 13572.21

24 10.2 Structural steel work riveted, bolted or welded in built up sections,

trusses and framed work, including cutting, hoisting, fixing in position

and applying a priming coat of approved steel primer all complete.

25 15.7 Demolishing brick work manually/ by mechanical means including

stacking of serviceable material and disposal of unserviceable material

within 50 metres lead as per direction of Engineer-in-charge.

15.7.4 In cement mortar Cum 10.00 1789.44 17894.38

26 15.2 Demolishing cement concrete manually/ by mechanical means

including disposal of material within 50 metres lead as per direction of

Engineer - in - charge.

15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) Cum 10.00 1306.01 13060.07

27 15.3 Demolishing R.C.C. work manually/ by mechanical means including

stacking of steel bars and disposal of unserviceable material within 50 Cum 10.00 3084.96 30849.63

metres lead as per direction of Engineer - in- charge.

28 2.8 Earth work in excavation by mechanical means (Hydraulic excavator) /

manual means in foundation trenches or drains (not exceeding 1.5 m

in width or 10 sqm on plan), including dressing of sides and ramming

of bottoms, lift upto 1.5 m, including getting out the excavated soil and

disposal of surplus excavated soil as directed, within a lead of 50 m.

29 2.25 Filling available excavated earth (excluding rock) in trenches, plinth,

sides of foundations etc. in layers not exceeding 20cm in depth,

consolidating each deposited layer by ramming and watering, lead up

to 50 m and lift upto 1.5 m.

30 MR-1 Supplying and filling in plinth with sand under floors, including

watering, ramming, consolidating and dressing complete.

31 1.1 By Mechanical Transport including loading,unloading and stacking

32 6.36 Brick work with modular extruded brunt fly ash clay sewer bricks

(Conforming to IS: 4885 ) in cement mortar 1:4 (1 cement : 4 Coarse

sand) in foundation and plinth :

6.36.1 Cement Mortar 1:4 ( 1 cement : 4 coarse sand) Cum 65.00 6878.45 447099.37

33 6.32 Brick work with clay flyash F.P.S. (non modular) brick of class

designation 7.5 in superstructure above plinth level up to floor five

6.32.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 104.00 8629.70 897488.61

34 6.45 Half brick masonry with non modular fly ash bricks of class designation

10, conformingio IS :12894, in super structure above plinth and upto

6.45.2 Cement mortar 1 : 4 (1 cement : 4 coarse sand) Sqm 244.00 1021.60 249269.31

35 4.1 Providing and laying in position cement concrete of specified grade

excluding the cost of centering and shuttering - All work up to plinth

4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources

: 8 graded stone aggregate 40 mm nominal size derived from natural Cum 314.00 6664.95 2092792.90

36 4.1 Providing and laying in position cement concrete of specified grade

excluding the cost of centering and shuttering - All work up to plinth

4.1.3 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources

: 4 graded stone aggregate 20 mm nominal size derived from natural Cum 255.00 7759.71 1978726.46

BILL OF QUANTITY

Renovation of Executive flat complex, Sec-4, boundary wall & development of Park under the work of Various Civil, Electrical, Water Supply, Horticulture, Hospitality jobs required for Hockey World Cup-2023

and other jobs in Steel Township at Rourkela (Odisha).

SL No DSR/MR ITEM DESCRIPTION Unit Qty RATE AMOUNT

37 5.1 Providing and laying in position specified grade of reinforced cement

concrete, excluding the cost of centering, shuttering, finishing and

reinforcement - All work up to plinth level :

5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural

sources : 3 graded stone aggregate 20 mm nominal size derived from Cum 10.00 8812.28 88122.82

natural sources)

38 5.2 Reinforced cement concrete work in walls (any thickness), including

attached pilasters, buttresses, plinth and string courses, fillets,

columns, pillars, piers, abutments, posts and struts etc. above plinth

level up to floor five level, excluding cost of centering, shuttering,

finishing and reinforcement :

5.2.1 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural

sources : 3 graded stone aggregate 20 mm nominal size derived from Cum 10.00 10730.68 107306.78

natural sources).

5.9 Centering and shuttering including strutting, propping etc. and removal

39 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete Sqm 22.00 324.45 7137.84

40 5.9.2 Walls (any thickness) including attached pilasters, butteresses, plinth

and string courses etc.

41 5.9.3 Suspended floors, roofs, landings, balconies and access

42 5.9.4 Shelves (Cast in situ) Sqm 1.00 807.62 807.62

43 5.9.5 Lintels, beams, plinth beams, girders, bressumers and

44 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts Sqm 13.00 847.33 11015.35

45 5.22/5.22A Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete upto plinth level./

Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete above plinth level

5.22.6/5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 1668.00 94.45 157547.07

46 22.5 Providing and laying water proofing treatment in sunken portion of

WCs, bathroom etc., by applying cement slurry mixed with water

proofing cement compound consisting of applying :

a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water

proofing cement compound @ 0.253 kg/ sqm. This layer will be

allowed to air cure for 4 hours.

(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water Sqm 100 544.28 54427.50

proofing cement compound @ 0.126 kg/sqm. This layer will be

allowed to air cure for 4 hours followed with water curing for 48 hours.

The rate includes preparation of surface, treatment and sealing of all

joints, corners, junctions of pipes and masonry with polymer mixed

47 MR-71 Cleaning the surface by chipping of lose materials etc. and provide

two coat of Sika Topseal 107(Two pack acrylic cementitious water

proofing coating system) with glass fiber on the surface (3kg per sqm Sqm 823.00 343.72 282879.21

for two coats) or equivalent and as per direction of Engg-In-Charge.

Water proofing treatment of RCC sunshade with Zycosil/equivalent

water proofing Solution (1 litre of Zycosil/equivalent & 20 litres of

water stirred first & 2 litres of Zycoprime/equivalent added and stirred

(total 23 litres)) till it meets the saturation level and testing as per

RILEM or by water drops test in which water drops do not absorb but

drops remain or rolls.

49 14.75 Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5

sqm and under, including cutting the patch in proper shape, raking out

joints and preparing plastering the wall surface with white cement

based polymer modified self curing mortar, including disposal of

rubbish, all complete as per the direction of Engineer-In-Charge.

50 MR Providing damp proof elastomeric coating on wall/roof surface for

water proofing with Asian Smart care/ Sika XT/ Choksey futura 5 with

primer and min two coats of elastomeric paint as per manufacturer

specification along with cleaning, scrapping and surface preparation

including cost of all materials, labours, tools and tackles, lead, lift etc

complete as per direction of the Engineer-in-charge

51 MR-52 Providing & mixing chemical admixture such as "SIKA LATEX" or

equivalent in cement concrete / mortar and bonding work as per

manufacturer's specification and as directed by Engineer- in - Charge.

52 17.35 Providing and fixing soil, waste and vent pipes :

BILL OF QUANTITY

Renovation of Executive flat complex, Sec-4, boundary wall & development of Park under the work of Various Civil, Electrical, Water Supply, Horticulture, Hospitality jobs required for Hockey World Cup-2023

and other jobs in Steel Township at Rourkela (Odisha).

SL No DSR/MR ITEM DESCRIPTION Unit Qty RATE AMOUNT

17.35.1.2 Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989

53 17.60 Providing and fixing trap of self cleansing design with screwed down or

hinged grating with or without vent arm complete, including cost of

cutting and making good the walls and floors :

17.60.1 100 mm inlet and 100 mm outlet

17.60.1.1 Sand cast iron S&S as per IS: 3989 Each 108.00 1690.03 182523.66

54 17.38 Providing and fixing bend of required degree with access door,

insertion rubber washer 3 mm thick, bolts and nuts complete.

17.38.1.2 Sand cast iron S&S as per IS - 3989 Each 217.00 629.61 136626.30

55 17.39 Providing and fixing plain bend of required degree.

17.39.1.2 Sand cast iron S&S as per IS - 3989 Each 108.00 463.31 50037.27

56 17.43 Providing and fixing single equal plain junction of required degree with

access door, insertion rubber washer 3 mm thick, bolts and nuts

17.43.1.2 Sand cast iron S&S as per IS - 3989 Each 108.00 770.58 83222.87

57 MR-65 To fill the peripheral gap between pipe and concrete/brick surface

with free flow, ready to use, Sika Rep Microcrete 4 of Sika or

equivalent of Fosroc,Pidilite,BASF and sealing the mouth of annual gap

in 10 mm x 10 mm with moisture insensitive, two component, epoxy

based Sikagard 694 FI of Sika or equivalent of Fosroc,Pidilite,BASF as

58 14.72 Providing and fixing double scaffolding system (cup lock type) on the

exterior side, up to seven story height made with 40 mm dia M.S. tube

1.5 m centre to centre, horizontal & vertical tubes joining with cup &

lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S.

staircase system in the scaffolding for working platform etc. and

maintaining it in a serviceable condition for the required duration as

approved and removing it there after .The scaffolding system shall be

stiffened with bracings, runners, connection with the building etc

wherever required for inspection of work at required locations with

essential safety features for the workmen etc. complete as per

directions and approval of Engineer in-charge .The elevational area of

the scaffolding shall be measured for payment purpose .The payment

will be made once irrespective of duration of scaffolding. sqm 285.00

Note: - This item to be used for maintenance work judicially, necessary

deduction for scaffolding in the existing item to be done.

59 15.56 Dismantling old plaster or skirting raking out joints and cleaning the

surface for plaster including disposal of rubbish to the dumping ground Sqm 1706.00 47.46 80972.55

within 50 metres lead.

60 13.4 12 mm cement plaster of mix :

61 13.6 20 mm cement plaster of mix :

62 13.16 6 mm cement plaster of mix :

63 13.91 Removing dry or oil bound distemper, water proofing cement paint

and the like by scrapping, sand papering and preparing the surface Sqm 3579.00 21.97 78619.77

smooth including necessary repairs to scratches etc. complete.

64 13.88 Removing white or colour wash by scrapping and sand papering and

preparing the surface smooth including necessary repairs to scratches Sqm 3000.00 17.23 51677.68

65 13.43 Applying one coat of water thinnable cement primer of approved

brand and manufacture on wall surface :

13.43.1 Water thinnable cement primer Sqm 3868.00 67.90 262647.56

66 13.80 Providing and applying white cement based putty of average thickness

1 mm, of approved brand and manufacturer, over the plastered wall

surface to prepare the surface even and smooth complete.

67 13.48A Finishing walls with 100% Premium acrylic emulsion paint having VOC

less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali &

fungal resistance, dirt resistance exterior paint of required shade

(Company Depot Tinted) with silicon additives.

13.48A.1 New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and

including priming coat of exterior primer applied @ 0.90 litre/10 sqm Sqm 7158.00 162.72 1164779.16

68 13.50 Applying priming coat:

BILL OF QUANTITY

Renovation of Executive flat complex, Sec-4, boundary wall & development of Park under the work of Various Civil, Electrical, Water Supply, Horticulture, Hospitality jobs required for Hockey World Cup-2023

and other jobs in Steel Township at Rourkela (Odisha).

SL No DSR/MR ITEM DESCRIPTION Unit Qty RATE AMOUNT

13.50.1 With ready mixed pink or Grey primer of approved brand and

manufacture on wood work (hard and soft wood)

69 13.61 Painting with synthetic enamel paint of approved brand and

manufacture to give an even shade :

13.61.1 Two or more coats on new work Sqm 532.00 138.49 73677.73

70 12.50 Providing and fixing precoated galvanised iron profile sheets (size,

shape and pitch of corrugation as approved by Engineer-in-charge)

0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams

per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy

primer on both side of the sheet and polyester top coat 15-18 microns.

Sheet should have protective guard film of 25 microns minimum to

avoid scratches during transportation and should be supplied in single Sqm 219.00 707.53 154948.17

length upto 12 metre or as desired by Engineer in-charge. The sheet

shall be fixed using self drilling /self tapping screws of size (5.5x 55

mm) with EPDM seal, complete upto any pitch in horizontal/ vertical

or curved surfaces, excluding the cost of purlins, rafters and trusses

and including cutting to size and shape wherever required.

18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipes & fittings

with one step CPVC solvent cement, trenching, refilling & testing of

joints complete as per direction of Engineer in Charge

73 15.7 Demolishing brick work manually/ by mechanical means including

stacking of serviceable material and disposal of unserviceable material

within 50 metres lead as per direction of Engineer-in-charge.

15.7.4 In cement mortar Cum 72.00 1789.44 128839.56

74 15.2 Demolishing cement concrete manually/ by mechanical means

including disposal of material within 50 metres lead as per direction of

Engineer - in - charge.

15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) Cum 18.00 1306.01 23508.13

75 15.18 Dismantling steel work in built up sections in angles, tees, flats and

channels including all gusset plates, bolts, nuts, cutting rivets, welding

etc. including dismembering and stacking within 50 metres lead.

76 15.1 Demolishing lime concrete manually/ by mechanical means and

disposal of material within 50 metres lead as per direction of Cum 9.00 739.55 6655.99

Engineerin- charge.

77 15.3 Demolishing R.C.C. work manually/ by mechanical means including

stacking of steel bars and disposal of unserviceable material within 50 Cum 9.00 3084.96 27764.66

metres lead as per direction of Engineer - in- charge.

78 14.79 Disconnecting damaged overhead/terrace PVC water storage tank of

any size from water supply line and removing from the terrace

including shifting at ground level as per direction of Engineer-in-charge

79 10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow

tubes, channels, plates etc., including welding, grinding, buffing,

polishing and making curvature (wherever required) and fitting the

same with necessary stainless steel nuts and bolts complete, i/c fixing

the railing with necessary accessories & stainless steel dash fasteners ,

stainless steel bolts etc., of required size, on the top of the floor or the

side of waist slab with suitable arrangement as per approval of

Engineer-in charge, (for payment purpose only weight of stainless

steel members shall be considered excluding fixing accessories such as

nuts, bolts, fasteners etc.).

80 MR-3 Fabricating and erecting structural steel like joist/ channel/ angle in

trusses/ posts/ rafter/ purlins in true to line and level including cutting

required length. drilling holes and welding etc complete as per the Kg 1464.00 40.50 59290.95

direction of the Engr-In-charge. (Excluding cost of structural steel).

81 MR-66 Supplying and spreading of moorum / Stone Crusher dust at the work

site as per the instruction of site engineer in charge

82 11.39 Providing and laying rectified Glazed Ceramic floor tiles of size

300x300mm or more (thickness to be specified by the manufacturer),

of 1st quality conforming to IS : 15622, of approved make, in colours

White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement Sqm 7.00 1204.02 8428.15

mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry

@ 3.3 kg/ sqm including grouting the joints with white cement and

matching pigments etc., complete.

BILL OF QUANTITY

Renovation of Executive flat complex, Sec-4, boundary wall & development of Park under the work of Various Civil, Electrical, Water Supply, Horticulture, Hospitality jobs required for Hockey World Cup-2023

and other jobs in Steel Township at Rourkela (Odisha).

SL No DSR/MR ITEM DESCRIPTION Unit Qty RATE AMOUNT

83 8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to

IS: 15622 (thickness to be specified by the manufacturer), of approved

make, in all colours, shades except burgundy, bottle green, black of

any size as approved by Engineer-in-Charge, in skirting, risers of steps

and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3

coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,

including pointing in white cement mixed with pigment of matching

shade complete.

84 11.41A Providing and laying Vitrified tiles in floor in different sizes (thickness

to be specified by the manufacturer) with water absorption less than

0.08% and conforming to IS:15622, of approved brand &

manufacturer, in all colours and shade, laid on 20 mm thick cement

mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry

@3.3 kg/sqm including grouting the joints with white cement and

matching pigments etc. The tiles must be cut with the zero chipping

diamond cutter only . Laying of tiles will be done with the notch

trowel, plier, wedge, clips of required thickness, leveling system and

rubber mallet for placing the tiles gently and easily.

11.41A.3 Glazed Vitrified tiles Matt/Antiskid finish of size

85 16.68 Providing and laying 60mm thick faciory made cement concrete

interlocking paver block of M -30 grade made by block making

machine with strong vibratory compaction, of approved size, design &

shape, laid in required colour and pattern over and including 50mm Sqm 153.00 1001.95 153297.80

thick compacted bed of coarse sand, filling the joints with line sand

etc. all complete as per the direction of Engineer-in-charge.

86 11.56 Providing and laying Polished Granite stone flooring in required design

and patterns, in linear as well as curvilinear portions of the building all

complete as per the architectural drawings with 18 mm thick stone

slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement

: 4 coarse sand) laid and jointed with cement slurry and pointing with

white cement slurry admixed with pigment of matching shade

including rubbing, curing and polishing etc. all complete as specified

and as directed by the Engineer-in-Charge

11.56.1 Polished Granite stone slab colour of Black, Cherry/Ruby Red or

87 16.90 Providing and laying tactile tile (for vision impaired persons as per

standards) of size 300x300x9.8mm having with water absorption less

than 0.5% and conforming to IS:15622 of approved make in all colours

and shades in for outdoor floors such as footpath, court yard, multi

modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 Sqm 153.00 1811.09 277096.66

cement : 4 coarse sand) in all shapes & patterns including grouting the

joints with white cement mixed with matching pigments etc. complete

as per direction of Engineer-in-Charge.

88 13.18 Neat cement punning. Sqm 70.00 71.43 5000.25

89 16.17 Fencing with R.C.C. post placed at required distance, embedded in

cement concrete blocks, every 15th post, last but one end post and

corner post shall be strutted on both sides and end post one side only,

provided with horizontal lines and two diagonals of barbed wire

weighing 9.38 kg per 100 metres (minimum), between the two posts

fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire

tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts,

struts, earth work and concrete to be paid for separately) :- Payment

to be made per metre cost of total length of barbed wire used.

16.17.1 Providing and fixing of barbed wire of thickest barb two ply, four

points @4" c/c for fencing with the existing R.C.C./angle iron/wooden

fence posts true to line and as per the direction of the Engr-In-charge.

90 16.70 Providing and fixing G.I. chain link fabric fencing of required width in

mesh size 50x50 mm including strengthening with 2 mm dia wire or

nuts, bolts and washers as required complete as per the direction of

Engineer-in-charge.

16.70.1 Made of G.I. wire of dia 4 mm Sqm 1703.00 905.54 1542142.53

BILL OF QUANTITY

Renovation of Executive flat complex, Sec-4, boundary wall & development of Park under the work of Various Civil, Electrical, Water Supply, Horticulture, Hospitality jobs required for Hockey World Cup-2023

and other jobs in Steel Township at Rourkela (Odisha).

SL No DSR/MR ITEM DESCRIPTION Unit Qty RATE AMOUNT

91 MR-49 Lettering sign board/ display board/ border/ symbol etc. with single or

multi colour fluorescent sticker in any language ( hindi, odiya,english)

on a prepared base /surface. the measurement will be paid as per the

length/width of sentence/symbol/border and height of stickers with

complete all lead & lift as per instruction of engr.-in-charge. where

there will be difference of height of letters in sentence, the height of

small letter shall be considered for measurement.

92 21.1 Providing and fixing aluminium work for doors, windows, ventilators

and partitions with extruded built up standard tubular sections/

appropriate Z sections and other sections of approved make

conforming to IS: 733 and IS: 1285, fixing with dash fasteners of

required dia and size, including necessary filling up the gaps at

junctions, i.e. at top, bottom and sides with required EPDM rubber/

neoprene gasket etc. Aluminium sections shall be smooth, rust free,

straight, mitred and jointed mechanically wherever required including

cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass /

stainless steel screws, all complete as per architectural drawings and

the directions of Engineer-in-charge. (Glazing, paneling and dash

fasteners to be paid for separately) :

21.1.1 For fixed portion

21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50

93 21.1.2 For shutters of doors, windows & ventilators including providing and

fixing hinges/ pivots and making provision for fixing of fittings

wherever required including the cost of EPDM rubber / neoprene

gasket required (Fittings shall be paid for separately)

21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50

94 21.2 Providing and fixing 12 mm thick prelaminated particle board flat

pressed three layer or graded wood particle board conforming to IS:

12823 Grade l Type ll, in panelling fixed in aluminum doors, windows

shutters and partition frames with C.P. brass / stainless steel screws

etc. complete as per architectural drawings and directions of

engineer in-charge.

21.2.2 Pre-laminated particle board with decorative lamination on both sides

95 21.3 Providing and fixing glazing in aluminium door, window, ventilator

shutters and partitions etc. with EPDM rubber / neoprene gasket etc.

complete as per the architectural drawings and the directions of

engineer-in-charge . (Cost of aluminium snap beading shall be paid in

21.3.2 With float glass panes of 5 mm thickness (weight not less than 12.50

Total Amount (Civil) (A):- 36,721,980 1,421,830

Total Amount (Civil) (A):- 36,721,980 1,421,830

DSR 2022 ELECTRICAL

Supplying and fixing following rating, double pole, 240 V,

isolator in the existing MCB DB complete with connections,

testing and commissioning etc. as required

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C"

curve, miniature circuit breaker suitable for inductive load of

2 2.10 following poles in the existing MCB DB complete with

connections, testing and commissioning etc. as required

2.10.2 Single pole and neutral Each 530 631.09 334477.32

Supply and fixing of 240/415V, AC Make: Standard Electricals Limited/

3 MR Indo-Asian/ L&T/Havels /schneide. ‘C’ Series/ Curve single pole with Each 100 2212.50 221250.00

Wiring for circuit/ submain wiring alongwith earth wire with the

4 1.7 following sizes of FRLS PVC insulated copper conductor, single core

cable in surface/ recessed steel conduit as required.

BILL OF QUANTITY

Renovation of Executive flat complex, Sec-4, boundary wall & development of Park under the work of Various Civil, Electrical, Water Supply, Horticulture, Hospitality jobs required for Hockey World Cup-2023

and other jobs in Steel Township at Rourkela (Odisha).

SL No DSR/MR ITEM DESCRIPTION Unit Qty RATE AMOUNT

Supply and laying of 25 mm(1") dia.of thickness 1.5mm tough PVC

pipe with ISI marked (make: Berlia Electricals Polymers/Poly Cab/

Prestige Plastics or any other make approved by the Deptt.)

6 MR concealed on wall/ ceiling/structure with proper saddling 14 SWG Mtr 16000 116.95 1871142.86

Al.ECC and other accessories on wall/ceiling surface with necessory

connections etc.complete as required including masonry work to its

Supplying and fixing following size/ modules, GI box alongwith

7 1.27 modular base & cover plate for modular switches in recess etc.

Supply & fixing of 1x16w/20W , LED T/L Fitting (Philips/Bajaj/GE/CG/

C&S/MESCAB/Lighting Technology) with mounting channel,bi-pin

8 MR holder & tube on existing wooden board/round block Each 900 479.38 431437.50

with necessary connections.

Supply & Fixing of bakelite angle holder/pendent holder/batten holder

on the existing wooden board/round block/bakelite sheet with all

connection complete as required. (ANCHOR make holders are to be

Supply & fixing of down rod for ceiling fan upto 3 feet whereever

required as per direction of Executive-in-charge

Supply & fixing of flexible Twin Cu.wire 16/020 mm size for

11 MR buzzer/calling bell/tube light/fan Mtr 3500 65.32 228625.00

etc.connection.

Supply & fixing of backelite ceiling rose on existing wooden round

12 MR block/ wooden board/bakelite Each 500 77.96 38982.14

sheet including all connection complete as required.

Supply & laying of 19 mm (3/4") dia.of thickness 1.5mm tough PVC

pipe with ISI marked (make: Berlia Electricals Polymers/Poly Cab/

Prestige Plastics & any other make approved by the Deptt.) with

proper saddling and other accessories such as RJ, Round Sheet and

PVC Bend on wall/ceiling surface with necessory connections

etc.complete as required including masonry work to its original.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre

below ground as strip earth electrode, including connection/

terminating with G.I. nut, bolt, spring, washer etc. as required.

(Jointing shall be done by overlapping and with 2 sets of G.I. nut

bolt & spring washer spaced at 50mm)

Supplying and fixing following modular switch/ socket on the

15 1.24 existing modular plate & switch box including connections but

excluding modular plate etc. as required.

1.24.4 3 pin 5/6 A socket outlet Each 900 128.54 115682.14

1.24.5 6 pin 15/16 A socket outlet Each 150 207.55 31133.04

Supplying and fixing modular blanking plate on the existing modular

plate & switch box excluding modular plate as

required.(make:LEGRAND,ANCHOR,L&T,SIEMENS,HAVELS,ABB,SCHNEI

Providing, laying and fixing following dia G.I. pipe (medium

class) in ground complete with G.I. fittings including trenching

(75 cm deep)and re-filling etc as required

SUPPLY & FIXING OF 50MMX6MM MS DOUBLE CLAMP SET FORFIXING

ALONG RCC POST/TUBLER POST WITH 12MM DIA GI BOLT & NUT AS

Installation of exhaust fan in the existing opening, including

19 1.50 making good the damage, connection, testing, commissioning

etc. as required.

BILL OF QUANTITY

Renovation of Executive flat complex, Sec-4, boundary wall & development of Park under the work of Various Civil, Electrical, Water Supply, Horticulture, Hospitality jobs required for Hockey World Cup-2023

and other jobs in Steel Township at Rourkela (Odisha).

SL No DSR/MR ITEM DESCRIPTION Unit Qty RATE AMOUNT

Supply&fixing of ceiling fan 48"sweep including all

necessaryconnections for proper functioning of

fans.(make:usha/orient/khaitan)

Supplying and fixing two module stepped type electronic fan

regulator on the existing modular plate switch box including

connections but excluding modular plate etc. as required.

Supplying and fixing following rating, four pole, (three phase

and neutral), 415 volts, residual current circuit breaker (RCCB),

22 2.15 having a sensitivity current 30 mA in the existing MCB DB

complete with connections, testing and commissioning etc. as

Supply of 240/415V, AC 50Hz Miniature Circuit Breaker Isolator,

capacity & no. of poles as mentioned or as per the direction of

Engineer in-charge. Make: Standard Electricals Limited,

Indo-Asian, L&T, Hagger, Siemens.(c)Four pole 100A.

Supplying and fixing following way, single pole and neutral,

sheet steel, MCB distribution board, 240 V, on surface/ recess,

complete with tinned copper bus bar, neutral bus bar, earth

bar, din bar, interconnections, powder painted including

earthing etc. as required. (But without MCB/RCCB/Isolator)

Dismantling & transportation to store of assorted size cable upto 16

25 MR sq.mm (SC/TC/3C) on or Mtr 5000 31.61 158035.71

PUNCHING OF THE ROAD SUITABLE FOR LAYING UP TO 4" DIAMETER

Removal of existing defective ceiling fan/cabin fan with or without

27 MR regulator from the residential Qrs/other premises and transportation Each 240 347.68 83442.86

& deposit at Elect. Maint. Stores

Supply and Fixing of 70 to 250A TP contactor including time clock

inside the panel board/wall surface including making holes in the

M.S sheet with supply and fixing of required nut and bolts including

all connections.

Supplying and fixing MOTOR STARTER-25A on the existing modular

plate switch box including connections but excluding modular plate

required(make:C&S,ANCHOR,L&T,SIEMENS,HAVELS,ABB,SCHNEIDER)

Excavation of new cable trench of 1.5 feet deep & 1 feet width in all

kinds of soil (including cutting of cement concrete, pitch road, rail line

crossing, wet soil, hard & rocky soil etc.) & back filling to the reqd.

30 MR extent. (wihout brick and sand) including supply & laying HDPE pipe, Mtr 250 653.74 163435.27

the HDPE pipe shall confirm to P-63 grade, dia 50mm, wall thickness

more than 4mm with ISI mark as per direction of Engineer-in-charge.

Supply and laying of cable 4 x 25mm2 al. The cable 1100v grade shall

confirm to is:1554(part-1) with standard aluminum conductor

confirming to class-2 of is:8130/84. The cable shall be with armour of

galvanised round wire/flat steel strip. Cable shall confirm to the is

indicated with its latest amendment. Cable shall be with ISI

certification mark. Cable shall be laid in existing trench

Excavation of NEW cable trench of 1000mm deep & 500mm width in

all kinds of soil (including cutting of cement concrete, pitch road, rail

line crossing, wet soil, hard & rocky soil etc.), laying of required

quantity of side PCC slab (1:1.5:3) (1 cement: 1.5 sand: 3 graded stone

aggregate 20 mm nominal size) having size: 500mm(L) x 200mm(W) x

100mm(T) in the both side of cable and Top RCC slab (1:1.5:3) (1

cement: 1.5 sand: 3 graded stone aggregate 20 mm nominal size)

having size: 500mm(L) x 300mm (W) x 50mm(T), sand etc. & back

filling to the required extent as per standard practice. All the materials

required are to be arranged by the contractor.

BILL OF QUANTITY

Renovation of Executive flat complex, Sec-4, boundary wall & development of Park under the work of Various Civil, Electrical, Water Supply, Horticulture, Hospitality jobs required for Hockey World Cup-2023

and other jobs in Steel Township at Rourkela (Odisha).

SL No DSR/MR ITEM DESCRIPTION Unit Qty RATE AMOUNT

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick

including accessories, and providing masonry enclosure with

33 5.4 cover plate having locking arrangement and watering pipe of each 20 7872.29 157445.71

2.7 metre long etc. with charcoal/ coke and salt as required.

Supply and fixing of fabricated feeder pillar ofsize 850mm(h) x

500mm(l) x 400mm (w) made out of 2mm thick ms sheet with front

opening two doors( for housing cable and termination kit kat

fuse/catridge fuse base of size- 0 & size-1, neutral bus and 2 nos.

stud bolts for earth connection) fabricated on ms angle

structure/frame of size 850mm +300mm (h) x 500mm (l) x 400mm (w)

made out of 50x50x6mm ms angle(300mm exetended for legs).the

34 MR feeder pillar should have dust and water ingress protection each 5 341351.88 1706759.38

conforming to ip:54. the feeder pillar should be duly spray painted

on both inner and outer side with one coat of red oxide primer & 2

coats of alminium paint. feeder pillar to be fixed at site with

concreting 4 nos of exetended legs. fitting & fixtures required for

feeder pillar against for feeder piller are as follows.( drawing to be

collected if required )

SUPPLY AND FIXING OF COOL WHITE 60 W LED STREET

LIGHTFITTING.LUMINARIES TYPE :LED, POWER RATED 60W, VOLTAGE

RATED:240V AC 50HZ, PF>0.9.HERMETICALLY SEALED, LED EFFICIENCY

>90LM/W, FOR STREET LIGHT FITTINGS HAVING PRESSURE DIE-CAST

ALUMINUM HOUSING & FRAME, MANUFACTURE WORD MARK/NAME

ENGRAVED/EMBOSSING ON THE DIE -CAST HOUSING,HEAT RESISTANT

TOUGHENED GLASS/POLY CARBONATE COVER WITH IP66 PROTECTION

OF (MAKE: PHILIPS/BAJAJ/GE/CG/SYSKA/MESCAB/LIGHTING

Supply and fixing of ICTPN/MCTPN 100 Amp.Main switch 440v

of make JJ-Delux/HELCON / HAVEL S/ ELMECK or, any other suitable

make with ISI marked approved by the Deptt. on the existing M.S

36 MR frame or wall surface on wooden board including all connection Each 15 10250.20 153752.95

complete as required with cable end sockts.All contacts and carrying

screws should be made out of electrolytic copper/brass.

Supply and fixing of Recessed Mounting cool white/warm

white LED fitting (Philips/Bajaj/GE/CG/C and S/MESCAB/Lighting

37 MR Technology) of 30w with suppy voltage 100V - 265 V,50HZ, Pre- Each 60 2181.95 130916.79

treated CRCA frame in Powder coated white finish,LED Efficacy: >90

lm/W, Weather protection: IP 20

Supply & fixing of 38mm dia heavy gauge GI pipe bracket of 2mtr

length on the pole surface with necessary clamping arrangement

for LED/MV/SV fitting with necessary cold bending as per site

39 MR viii) Bell push Each 80 128.54 10282.86

Dismantling of the existing damaged battens separating the wiring

with ECC and rewiring with new superior quality PVC CASHING and

CAPING with proper fixing on the ceiling/wall /structural surface with

necessary connection etc.complete as required. PVC CASHING and

CAPING to be supplied by party. 1/2" size PVC cashing and caping