Loading…
Loading…
Tender Value
₹7.6 L
EMD Value
₹7,700
Closing Date
10 Aug 2026, 1:00 pmClosed
Deputy Executive Engineer Morbi Electrical (R&B) Sub Division, MORBI
A & A to EI Work for City Mamlatdar office at Gibsan Middle school At Morbi,
330462
04/03 of 2026/2027
Open
Electrical
Works
Morbi
7 documents required · 7 mandatory
₹900
The Executive Engineer, Electrical R&B Division, Bhuj
₹7,700
2 Aug 2026
2 Aug 2026
2 Aug 2026
10 Aug 2026
2 Aug 2026
Name of Work:- A & A to EI Work for City Mamlatdar office at Gibsan Middle
school At Morbi,
Rate at which the
materials will be
Sr. No. Quantity Particulars charged to the
Signature of the Contractor Deputy Executive Engineer
Morbi Electrical R&B Sub Division
Executive Engineer
Electrical R&B Division
Name of Work:- A & A to EI Work for City Mamlatdar office at Gibsan Middle school At Morbi,
Sr. Quantities Estimated Rate
No. estimated but Total
may be more or amount
less Description of Item.
In Figures In Words according to
1 26 Pt. Point wiring for Light / Bell with 2-1.5 sq.mm & 450.46 Rupees Four
earth wire of 1.5 sq.mm (Green) both are of ISI
And Paise Forty
marked 1.1 kV grade FRLS PVC insulated multi Six Only
strand copper wires up to 10 mtr length , in below
type of pipe erected with 6A Modular type switch /
bell push & accessories and earth continuity of
following type, erected on PVC / Metallic/Wooden
box, single mounting base frame covered with
textured/metallic/white front plate modules erected
on / in wall / ceiling as per pipe erected, with
necessary Lamp holder/ceiling rose / H.D.Connector
(e) in existing pipe erected flushed on wall/ceiling
2 12 Pt. Point wiring for FAN with 2-1.5 sq.mm & earth 626.20 Rupees Six
wire of 1.5 sq.mm (Green) both are of .ISI marked
1.1 kV Grade FRLS PVC insulated multi strand Twenty Only
copper wires up to 10 mtr length, in below type of
pipe erected with 6A Modular type switch and
hum free EME step type electronic fan regulator
mounted and accessories with earth continuity of
following type erected on PVC / Metallic/Wooden
box, single mounting base frame covered with
textured/metallic/white front plate modules erected
on / in wall / ceiling as per pipe erected. with
necessary ceiling rose / H.D.Connector as directed.
(e) in existing pipe erected flushed on wall/ceiling
3 11 Pt. Point wiring for Individual Plug with & earth wire 466.62 Rupees Four
Hundred Sixty Six
of 1.5 sq.mm (Green) both are of ISI marked 1.1 kV
And Paise Sixty
grade FRLS PVC insulated multi strand copper Two Only
wires up to 10 mtr length, in below type of pipe
erected complete with Modular type switch & 5 pin
Plug erected on PVC / Metallic/Wooden box
covered with appropriate front plate modules
erected on / in wall / ceiling as per pipe erected with
following type of accessories.
[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm
Cu. Wire from nearby switchboard/mcb db board
(e) in existing pipe erected flushed on wall/ceiling
4 11 Pt. Point wiring for Individual Plug with & earth wire 637.31 Rupees Six
of 1.5 sq.mm (Green) both are of ISI marked 1.1 kV
Seven And Paise
grade FRLS PVC insulated multi strand copper Thirty One Only
wires up to 10 mtr length, in below type of pipe
erected complete with Modular type switch & 5 pin
Plug erected on PVC / Metallic/Wooden box
covered with appropriate front plate modules
erected on / in wall / ceiling as per pipe erected with
following type of accessories.
[II] For 16A Plug and 16 amp switch with 2-2.5
sq.mm Cu. Wire from mcb db board.
(e) in existing pipe erected flushed on wall/ceiling
5 18 Pt. Point wiring for on board Looped Plug with 6A 309.06 Rupees Three
Modular type switch & 5 pin socket erected on PVC
/ Metallic/Wooden box, single mounting base frame Only
covered with textured / metallic/white front plate
modules erected on / in wall / ceiling with
following type accessories
6 27 Ea Providing following type of Modular Type 160.59 Rupees One
Accessories mounted with PVC / metallic/Wooden
And Paise Fifty
box, single mounting base frame covered with Nine Only
textured / metallic/white front plate , modules
erected with necessary connections as per site
situation directed by Engineer In charge.
(8) Computer RJ-45 socket
7 970 Mtr. Providing and erecting ISI mark Medium class 24.24 Rupees Twenty
RIGID PVC PIPES of following size complete to be
Twenty Four Only
erected on/in wall or ceiling erected with necessary
PVC fittings & Junction boxes fixed with adhesive
solution & Clamps with following dia of pipes, in
approved manner as directed
8 40 Mtr. Providing & erecting PVC Corrugated Flexible 17.17 Rupees Seventeen
Conduit with required nos. of coupling, PVC
bushes, Check-nuts etc. complete of following sizes.
9 219 Mtr. Providing and erecting Mains with 1.1 kV grade 58.58 Rupees Fifty Eight
And Paise Fifty
FRLS PVC insulated ISI marked stranded Copper
conductor wire in following type of pipe to be
erected concealed in /flushed on wall/ceiling, with
1.5 sq. mm copper conductor FRLS PVC insulated
stranded wire of green colour for earth continuity of
(E) in existing pipe
(a) 2 wire 1.5 sq. mm
10 394 Mtr. Providing and erecting Mains with 1.1 kV grade 78.78 Rupees Seventy
Eight And Paise
FRLS PVC insulated ISI marked stranded Copper
conductor wire in following type of pipe to be Only
erected concealed in /flushed on wall/ceiling, with
1.5 sq. mm copper conductor FRLS PVC insulated
stranded wire of green colour for earth continuity of
(E) in existing pipe
(b) 2 wire 2.5 sq. mm
11 16 Mtr. Providing and erecting Mains with ISI marked, 295.93 Rupees Two
1.5kV grade electrolyte multi stranded, annealed
copper conductor with heat resistant PVC insulated Ninety Three Only
conforms to IS 694, IEC - 227 erected in existing
pipe of following size (Specifically for control
panel, relays, power switchgears, motor starters &
control wiring) with required size of copper lugs,
nuts and bolts if required.
(h) One wire 25.00 sq. mm
12 4 Mtr. providing and erecting Mains with ISI marked, 837.29 Rupees Eight
1.5kV grade electrolyte multi stranded, annealed
Seven And Paise
copper conductor with heat resistant PVC insulated Twenty Nine Only
conforms to IS 694, IEC - 227 erected in existing
pipe of following size (Specifically for control
panel, relays, power switchgears, motor starters &
control wiring) with required size of copper lugs,
nuts and bolts if required.
(k) One wire 70.00 sq. mm
13 24 Mtr. Supplying and erecting Flexible PVC insulated 58.58 Rupees Fifty Eight
And Paise Fifty
multi strand multi core 1.1 kV grade ISI marked
copper wires of following size to be erected as
(e) 1.50 Sq.mm 3 core round PVC sheathed
14 532 Mtr. Supplying & erecting approved make LAN cable of 47.47 Rupees Forty
Seven And Paise
following size in existing pipe as per direction
Forty Seven Only
15 27 Ea Providing & erecting Switch board for Computer 1133.22 Rupees One
or electric apparatus consisting of following
modular type accessories mounted with PVC / Three And Paise
Metallic concealed/open box with single mounting Twenty Two Only
base frame covered with textured/metallic /white
front plate,modules erected with necessary
connections as directed
1 no. 6A/16A universal plug-switch combined.
3 nos. 6A Switch
3 nos. 6A 5 pin Plug
For Modular Type Accessories
16 3 Ea Decorative call bell Ting-tong box type 250 volts 71.71 Rupees Seventy
complete erected
Seventy One Only
17 137 Ea. Supplying and erecting LED indoor fittings with 535.30 Rupees Five
LEDs of wattage 0.2 Watt to 0.5 Watt assembled on
single MCPCB, with housing used as a heat sink Thirty Only
shall be made of thick sheet Steel conforming to IS:
513/CRCA/ aluminium die cast powder coated and
high U.V. & corrosion resistance with diffuser
with company mark/name 160V to 270V, Power
Factor more than 0.95, THD < 15%,
CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt ,LED
LED driver efficiency > 85 %
( fitting required LM-79 & LM-80
Certificates)(NOTE: Below description have shown
ranges of Wattage capacity of LED fittings.The
Engineer incharge may select any wattage capacity
between the ranges shown.)
(A) Tube Light with integral driver
(v) 36-40 Watts, Surge-2 kV, IP-20, conventional
18 8 Ea. Supplying and erecting led lamps with following 112.11 Rupees One
wattage capacity of 220 to 240 voltage, minimum
And Paise Eleven
15000 burning hours life, 500 V in built-surge Only
protection,Polycarbonate diffuser, mounting suitable
for E14 / E27 / B22 lamp holders, pf >= 0.5 (A)
LED Lamps integral type, with PC diffuser suitable
(ii) 5 to 8 watts. Cat. III
19 108 Ea. Supplying and erecting LED indoor fittings with 589.84 Rupees Five
LEDs of wattage 0.2 Watt to 0.5 Watt assembled on
single MCPCB, with housing used as a heat sink Eighty Four Only
shall be made of thick sheet Steel conforming to IS:
513/CRCA/aluminium pressure die cast powder
coated and high U.V. & corrosion resistance with
diffuser housed in aluminium casted body with
company mark/name
160V to 270V,Power Factor more than 0.95, THD <
CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt
LED driver efficiency > 85 %
( fitting required LM-79 & LM-80
Certificates)(NOTE: Below description have shown
ranges of Wattage capacity of LED fittings.The
Engineer incharge may select any wattage capacity
between the ranges shown.)
(A) Square/ Circular shaped Surface/Recessed
Mount Downlight with provision for spring loaded
mounting clips complete.IP20.
(iii) 16-20 watts, Surge-2 kV.
20 12 Ea. Supplying and erecting LED street light / Flood 6177.16 Rupees Six
light fittings with High power White LEDs wattage
Hundred Seventy
of 3 Watt and above assembled on single MCPCB, Seven And Paise
efficiency more than 130 lm/w and corrosion free Sixteen Only
High pressure die cast aluminum housing with
smooth finish powder coated and heat sink extruded
aluminium with diffuser and Polycarbonate optics/
lenses, with toughened glass with company
mark/name engraved or embossed 160 to
V,Power Factor more than 0.95, THD < 10 %, CCT
3000 K to 5700K,Uniformity ratio >0.45, Luminaire
efficacy> 100 lumens/watt . LED driver efficiency >
85 %.( fittings required LM-79 & LM-80
certificates)(NOTE: Below description have shown
ranges of Wattage capacity of LED fittings.The
Engineer incharge may select any wattage capacity
between the ranges shown.)
(B) Flood Light (IP-65), Surge protection -4kV
integral and ,Light must have 440VAC line supply
with over-voltage protection.
(iv) 90 - 119 watts. Cat-lll
21 4 Ea Providing and erecting Approved make Four pole 6790.23 Rupees Six
moulded case circuit breaker having breaking
capacity ICU of 25 KA. at 415 V,having normal And Paise Twenty
current rating up to 25 A to 100A. with Fixed Three Only
thermal & magnetic release suitable to work on
A.C. supply 50 Hz. with all internal connections,
spreader tinned copper & complete erected in
existing 16 G.M.S. housing.
ICS=100% of ICU only Cat III
22 1 Ea Providing and erecting Approved make Four pole 17843.67 Rupees Seventeen
moulded case circuit breaker having breaking
capacity ICU of 35 KA. at 415 V. having Normal Three And Paise
current rating 200A.with variable Thermal & Sixty Seven Only
magnetic release suitable to work on A.C.supply
Hz. with all internal connections, spreader tinned
copper & complete erected in existing
ICS=100% of ICU only Cat III
23 1 Ea Providing and erecting Approved make Four pole 19628.04 Rupees Nineteen
moulded case circuit breaker having breaking
capacity ICU of 35 KA. at 415 V. having Normal Eight And Paise
current rating 200A.with variable Thermal & Four Only
magnetic release suitable to work on A.C.supply
Hz. with all internal connections, spreader tinned
copper & complete erected in existing
ICS=100% of ICU only Cat III
(10% Rate Added For Enclosure )
24 1 Ea Providing and erecting Approved make Earth fault 5482.28 Rupees Five
Relay suitable to mount with inter connection
suitable to following size of moulded case circuit Two And Paise
breaker having CT ratio & MCCB rating as Twenty Eight
following along with shunt trip 220V AC. with all Only
internal connections & complete erected in existing
25 12 Ea providing and erecting Miniature circuit breaker 297.95 Rupees Two
single pole 0.5A to 2A system and having breaking
Seven And Paise
capacity 10 KA to be erected in existing box. Ninety Five Only
confirming to IS 8828/1996 with ISI Mark
26 1 Ea Providing & erecting 415V MCB Four Pole Switch 702.96 Rupees Seven
for Lighting Load (B curve) having 10KA breaking
And Paise Ninety
capacity & confirms to IS :8828 in existing box Six Only
having following capacity
27 2 Ea Plastic enclosure fitted with DIN rail suitable for 108.07 Rupees One
incorporating Three /Four nos. MCB
And Paise Seven
28 2 Ea Sheets steel powder coated enclosure suitable for 176.75 Rupees One
Hundred Seventy
incorporating One/Two nos. MCB.
Seventy Five Only
29 1 Ea providing and erecting Approved make RCCBs 2166.45 Rupees Two
conforming to IS: 12640 and having sensitivity of
Hundred Sixty Six
30 mA and Short Circuit withstand capacity of 10 And Paise Forty
KA and suitable for operation on single phase 240 Five Only
V,50Hz. having characteristic of quick action &
tripping with all advance feature & do not
incorporate any electronic component. for following
Max. rating erected as directed
30 10 Kg Providing and erecting HOT deep Galvanised iron 77.77 Rupees Seventy
Seven And Paise
strip/wire 4.064mm to 1.626mm.
31 1 Ea Supplying & erecting earth pit of minimum bore 4591.46 Rupees Four
dia.150mm size approved make Earthing Electrode
consisting Pipe-in-Pipe Technology as per IS 3043- One And Paise
1987 made of corrosion free hot dipped G.I.Pipes Forty Six Only
having Outer pipe dia of 50mm having 80-200
Micron galvanising, Inner pipe dia of 25 mm having
200-250 Micron galvanising, connection terminal
dia of 12mm with constant ohmic value surrounded
by highly conductive compound with high charge
dissipation suitable for following type of
applications with chamber and heavy duty cover.
(A)(approved make OEM has to submit test
certificate including value of earth resistance of
installation duly stamped and signed by agency and
officer Incharge has to ensure the value of earthing
resistane mentioned in test Certificate) & having
back filling compound of (B) Inner chemical (CCM
Compound)- Resistivity:- 0.2 ohm / meter testing as
per IEC 62561-2017, Voltage drop:- < 1 volt at no
load & dry form, Sulphar content:- <2%(C) Back
fill Compound :- Earthing compound should be
capable to retain moisture for long time Necessary
test report must be submitted by Agency.
32 48 Kg Providing , erecting , fabricating the M.S. structure 77.77 Rupees Seventy
Seven And Paise
as per requirement on site incorporating proper size
of M.S. angles,square,round, flats, bars, channels, Only
sections complete with cutting, welding, grinding &
finishing duly painted with one coat of red oxide
with erection on site as per direction of engineer in
charge with necessary grouting, cementing,
plastering & finishing complete.
33 15 Mtr. Providing and erecting FRLS-XLPE(IS:7098)(I)-88 589.84 Rupees Five
ISI armoured cable multistrand Aluminium
conductor for 1.1 kV. to be laid on wall with Eighty Four Only
necessary clamps or in existing trench / pipe of
following size of cables
(E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core)
34 216 Mtr. Providing and erecting FRLS-XLPE (IS:7098)(I)-88 168.67 Rupees One
ISI armoured cable multistrand / Solid Aluminium
Eight And Paise
conductor for 1.1 kV. to be laid on wall with Sixty Seven Only
necessary clamps or in existing trench / pipe of
following size of cables
(C) 4 core 10 Sq. mm
35 1 Ea Providing and, fixing heavy duty flange type brass 38.38 Rupees Thirty
Eight And Paise
cable gland with rubber ring for PVC insulated
Thirty Eight Only
armoured cable complete with out going tails,
insulating tape etc for following size of cables.
(C) 2 to 4 core 10 Sq. mm
36 4 Ea Providing and, fixing heavy duty flange type brass 131.30 Rupees One
double compression type cable gland with rubber
ring for PVC insulated armoured cable complete Thirty Only
with out going tails, insulating tape etc for following
size of cables.
(D) 3 & 1/2 core 95 Sq. mm
37 4 Ea Solder less crimping type Aluminium lugs 13.13 Rupees Thirteen
conforming to IS suitable for cable of following size
evenly crimped with high pressure tool & connected
to switchgear terminals with brass/cadmium plated
nut bolts in an approved manner.
38 4 Ea Solder less crimping type Aluminium lugs 20.20 Rupees Twenty
And Paise Twenty
conforming to IS suitable for cable of following size
evenly crimped with high pressure tool & connected
to switchgear terminals with brass/cadmium plated
nut bolts in an approved manner.
39 12 Ea Solder less crimping type Aluminium lugs 40.40 Rupees Forty And
Paise Forty Only
conforming to IS suitable for cable of following size
evenly crimped with high pressure tool & connected
to switchgear terminals with brass/cadmium plated
nut bolts in an approved manner.
40 70 Ea. Providing & erecting Approved make Power Saving 1948.29 Rupees One
45 - 50 Watt Ceiling Fan with double ball bearing
ISI mark with Condenser 230 volt A.C. 50 Hz Eight And Paise
1200 mm sweep complete having 3blades with Twenty Nine Only
aluminium blades with , canopy & 30 cm. down rod
erected with earthing.
41 35 Mtr. Supplying and erecting 19 / 20 mm. nominal bore 108.07 Rupees One
Medium Class M.S. Pipe down rod erected duly
And Paise Seven
painted for fan complete with proper insulation Only
without leakage and earthing.
42 70 Ea Providing 2.5mm.thick laminated acrylic sheet to 18.18 Rupees Eighteen
cover the fan hook or Fan box.
43 12 Ea Supplying & erecting approved make SMC press 524.19 Rupees Five
moulded composite FRP. loop-in, loop-out approx.
2mm thick box complete with Bakelite connector Nineteen Only
strip 5way(3P+N+E),DIN rail for mounting mob &
hinged doors as per requirement having locking
arrangements with mounting clamp with nuts, bolts
& washers suitable for erection on pole with cable
clamps& earth bolt of following size of box.
(E) 200mm x 140mm x 125mm [deep]
44 1 Ea Supplying & erecting approved make Digital time 3168.37 Rupees Three
switch having lithium cell 6 years operative and
operate battery backup 1 channel day clock with 14 Eight And Paise
memory programme, suitable to operate on 240V + Thirty Seven Only
5%, 16A with, floating contacts Minimum
switching setup time 1 minimum & LCD display.
Also comprised permanent ON/OFF switching.
Programming switches & housed in fire proof
thermoplastic enclosure & transparent cover erected
as required with necessary connection erected as
45 1 Ea Supplying & erecting power contactor ,AC3 duty 2782.55 Rupees Two
for time switch complete erected as per direction
Cat III Two And Paise
(D) 4 pole 440V 40 Amp. Fifty Five Only
46 1 Ea. Providing & erecting water cooler having storage 61482.74 Rupees Sixty One
capacity 150 Ltr. & cooling capacity 150 Ltr.per
hour @ an ambient temp of 45˚ C. The outlet temp. Two And Paise
of the water should drop by 15˚C within a hour, The Seventy Four
water cooler should be comprising of hermetically Only
sealed compressor, fan motor, condensing unit,
water tank surrounded by evaporating, coil,
thermostats, relay etc.complete with necessary inlet
& outlet connection. The body of water cooler will
be made from Stainless Steel and ISI Certified.
47 1 Ea. Supplying & erecting 5 stage single reverse osmosis 29187.99 Rupees Twenty
water purification system with M.S. powder coated
frame, prefilter housing with 'O' ring presediment Eighty Seven And
filter GAC filter, carbon filter suitable buster DC Paise Ninety Nine
pump capacity 80 psi, mention with 40 psi inline Only
type post carbon filter auto low & high pressure
switches with following size of storage tank & LPH
capacity & erected as directed .
[C] 50 Ltr / Hr with 150 psi 2 nos booster pump.
In Words : Rupees Seven Lakh(s) Sixty Three Thousand Nine Hundred Ninety Five And Paise One Only
I/We am/are willing to carry out the work at ____________% above/below (in Figures)__________________________
percent Above / below (in words) the estimated rates mentioned above amount of my\our tender works out as under :-
Estimated amount put to Tender Rs._________________
Deduct _____% below Rs._________________
(-)Less For Dismantle Material Rs._________________
Net Amount Rs._________________
Estimated amount put to Tender Rs. _________________
(-)Less For Dismantle Material Rs. _______________
Net Amount Rs. _________________
A I/We hereby declare that I/we have visited the site and fully acquainted my self / our selves with the local situation regarding
material,labour and other factors pertaining to the work before submitting this tender.
B I/We hereby declare that I/we carefully studied the conditions of contract, detailed technical specifications and other tender
documents of this work and agree to execute the same accordingly.
(Signature of the Contractor) Deputy Executive Engineer
Morbi Electrical R&B Sub Division
Executive Engineer
Electrical R&B Division
Note 1 Please strike out whichever is not applicable.
2 In the case of tendered amount being quoted incorrectly the quoted pered percentage Below/Above will be
considered as final.
Name Of A & A to EI Work for City Mamlatdar office at Gibsan Middle school At Morbi,
Sr.No. Item Name Make Remarks
1 Light Point & Mains RR, KEI, Finolex, Polycab, GreatWhite
2 Pipe Anchor, Polycab, Nihir, Greatwhite
3 Accessories ( Swich Legrand, Schnider, Greatwhite
Bord, Computer Board
4 LED Tube Light, LED Cropmton, Pyrotech, Philips, Havells, jaquar, Osram
Lamp, Street Light
5 MCB, MCCB, DB, C/o Legrand, Schnider, Siemens, L&K, Greatwhite,
6 Aluminium arm Cable Adcab, Allcab, RR, Havells, Polycab
7 Ceiling Fan, Wall Fan , Usha, Bajaj, Havells, Orient, Crompton
8 Water Cooler Usha, Voltas
9 Inverter Luminous, Microtech, or Rnb Approved
10 Motor Starter L&T, Seimens, Schnider
11 Motor Amrut, Lubi, Silver
12 Flate Cable Adcab, Allcab, RR, Havells, Polycab
13 Earthing Vasudha, Yansi, Or RnB Approved
Dy. Executive Engineer
RnB (Elect) Sub Division
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
3 City Mamlatdar At gibsan middle school Morbi.pdf
GR AND GST LTR.pdf
NOTICE NO 04 OF 2026 2027.pdf
STANDARD BIDDING DOCUMENTS.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .