Tender for Wire-Free City network works — involving conversion of overhead lines into underground networks, covering supply, laying, testing, and commissioning of 11KV/22KV UG XLPE cables (to be supplied by DGVCL) with cable terminations and straight-through joint kits (to be supplied by the contractor), along with erection and maintenance of overhead HT/LT lines and transformer center structures, including dismantling of poles and transformer centers, under SI scheme or any other scheme for Laskana Subdivision or any other subdivision under Surat Rural Division

Name of Work :-Tender for Wire-Free City network works — involving conversion of overhead lines into underground

networks, covering supply, laying, testing, and commissioning of 11KV/22KV UG XLPE cables (to be supplied by

DGVCL) with cable terminations and straight-through joint kits (to be supplied by the contractor), along with erection

and maintenance of overhead HT/LT lines and transformer center structures, including dismantling of poles and

transformer centers, under SI scheme or any other scheme for Laskana Subdivision or any other subdivision under

Surat Rural Division.

Item Code Item Unit FY 2024-25

HT TAPPING FROM THE EXISTING POLE INCLUDING FIXING OF

CROSS ARMS, CLAMPS ANTI-CLIMBING DEVICES, DANGER BOARD,

INSULATORS ETC. COMPLETE AND PAINTING OF FABRICATED

MATERIALS AND NUMBERING COMPLETE WITH COST OF PAINTS AS

PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF

GUY SET AND EARTHING.

ERECTION OF PSC POLES OF 8 *200 KG INCLUDING EXCAVATION

OF PIT AND REFILLING OF EARTH, FIXING OFCROSS ARMS, TOP

FITTING CLAMPS ANTI-CLIMBING DEVICES, INSULATORS ETC.

2 9926000002 COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON No.

THE POLES AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY

SET AND EARTHING.

ERECTION OF STEEL POLES OF 9 TO 11 METERS INCLUDING EXCAVATION OF

PIT AND REFILLING OF EARTH, FIXING OFCROSS ARMS, TOP FITTING CLAMPS ANTI-

CLIMBING DEVICES, DANGER BOARD, INSULATORS ETC. COMPLETE AND PAINTING OF

STEEL POLE, FABRICATED MATERIALS USED ON THE POLEAND NUMBERING WITH COST

OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET

ERECTION OF STEEL POLE OF 13 METERS FOR RAILWAY

CROSSING ON BG/MG/NG LINE FOR 0.400/11/22KV OVERHEAD LINES

I.E INCLUDING EXCAVATION OF PIT & REFILLING OF EARTH, FIXING

CROSS ARMS, TOP FITTING CLAMPS,ANTI-CLIMBING DEVICES

4 9926000004 DANGER BOARD, INSULATORS ETC. COMPLETE AND PAINTING OF No.

STEEL POLES, FABRICATED MATERIALS USED ON THE POLES AND

NUMBERING WITH COSTOF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND

ERECTION OF DOUBLE POLE STRUCTURE OF 8 METERS 200 KG

PSC POLES INCLUDING EXCAVATION OF PITS & REFILLING OF

EARTHING, FIXING OF CHANNELS, SUPPORTING ANGLES,CLAMPS,

ANTI-CLIMBING DEVICES DANGER BOARDS,INSULATORS

ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USED

ON THE POLES AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY

SETS AND EARTHING.(WITHOUT AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE OF 9 TO 11 METERS.STEEL

POLE INCLUDING EXCAVATION OF PITS & REFILLING OFEARTH, FIXING OF CHANNELS,

SUPPORTING ANGLES, CLAMPS,ANTI-CLIMBING DEVICES DANGER BOARDS,

INSULATORS ETC.COMPLETE & PAINTING OF POLES,FABRICATED MATERIALSUSED ON

THE POLES AND NUMBERING WITH COST OF PAINTSAS PER STANDARD SPECIFICATION

BUT EXCLUDING ERECTION OF GUY SET AND EARTHING.(WITHOUT AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB

SWITCH, HG FUSES OF 8 MTRS 200 KG PSC POLES INCLUDING

EXCAVATION OF PITS AND REFILLING OF EARTH,FIXING OF

CHANNELS SUPPORTING ANGLES, CLAMPS, ANTI-CLIMBING

7 9926000007 DEVICES, DANGER BOARDS, INSULATORS,DOFUSES ETC. No.

COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON

THE POLES AND NUMBERING WITH COSTOF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDINGOF ERECTION OF GUY

SET AND EARTHING.(WITH AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB

SWITCH,HG FUSES, 9 TO 11 METERS STEEL POLES INCLUDING EXCAVATION OF

PITS AND REFILLING OF EARTH, FIXING OFCHANNEL, SUPPORTING ANGLES, CLAMPS,

8 9926000008 ANTI-CLIMBING DEVICES , DANGER BOARDS, INSULATORS, ETC. COMPLETE AND No.

PAINTING OF POLES FABRICATED MATERIALS USED ON THE POLES AND NUMBERING

WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF

GUY SET AND EARTHING.(WITH AB SWITCH)

ERECTION OF DOUBLE POLE STRUCTURES WITH MOUNTING OFAB

SWITCH, HG FUSES, TRANSFORMERS, LIGHTENING ARRESTORS,

DISTRIBUTION BOX. OF 8 METER,200KG PSC POLE METERS

POLES INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH,

CARTING OF TRANSFORMERS FROMSTORES TO SITE, FIXING OF

9 9926000009 CHANNELS, SUPPORTING ANGLES,BRACINGS CROSS ARMS No.

CLAMPS, ANTICLIMBING DEVICES DANGER BOARDS, CONDUCTOR

AND CABLE WIRING ETC.COMPLETE AND PAINTING OF FABRICATED

MATERIALS USEDON THE POLES AND NUMBERING WITH COST OF

PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SETS AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB

SWITCH,HG FUSES TRANSFORMERS, LIGHTENING ARRESTORS,

DISTRIBUTION BOX 9 TO 11 METERS STEEL POLES INCLUDING EXCAVATION OF

PITS & REFILLING OF EARTH CARTING OF TRANSFORMERS FROM STORE TO SITE,

10 9926000010 FIXINGOF CHANNELS SUPPORTING ANGLES, BRACING, CROSS ARMS,CLAMPS, No.

ANTICLIMBING DEVICES, DANGER BOARDS,CONDUCTOR AND CABLE WIRING ETC.

COMPLETE AND PAINTING OF POLES FABRICATED MATERIALS USED ON THE POLES AND

NUMBERING AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTIONS OF GUY

SETS AND EARTHING.

ERECTION OF GUY SET INCLUDING EXCAVATION OF PITS &

REFILLING OF EARTH AS PER STANDARD SPECIFICATION WITH

11 9926000011 STAY CLAMPS, STAY WIRE, ANCHOR ROD, TURN BUCKLE, EYEBOLT, No.

GUY INSULATOR, CEMENT CONCRETE BLOCK ETC. BUT EXCLUDING

CONCRETING OF POLES, GUYS, ETC. INCLUDING COST OF CEMENT

12 9926000012 SAND METAL (1:2:4) AND WATER ETC. AS PER STANDARD CMT

SPECIFICATION.(cement Should be 53 grade) used for Concreting.

ERECTION OF COIL TYPE EARTHING INCLUDING COST OF

13 9926000013 COAL,SALT ETC. BUT WITHOUT COST OF GI WIRE AS PER No.

STANDARD SPECIFICATION(20kg solt+20kg coal)

ERECTION OF GI PIPE/CI PLATE TYPE EARTHING INCLUDINGCOST

14 9926000014 OF COAL SALT ETC. BUT WITHOUT COST OF PIPE/GIPLATE GI WIRE No.

AS PER STANDARD SPECIFICATION.(20kg solt+20kg coal)

Item Code Item Unit FY 2024-25

ERECTION OF STREET LIGHT FIXTURE COMPLETE WITH CLAMPS,

BRASS NIPPLE, BRASS HOLDER TECK WOOD BUSH,REFLECTORS

FUSE, WIRING ETC. AS PER STANDARD SPECIFICATION BUT

EXCLUDING COST OF MATERIALS.

STRINGING OF(30mm2)ACSR/34MM@,55MM2 AAA CONDUCTOR for

ALL TYPE OF CONDUCTOR (EXCEPT DOG CONDUCTOR) FOR ONE COND

11/22KV & LT LINES INCLUDING FIXING OF INSULATORS, BINDING PER KM

STRINGING OF GI WIRE 8 SWG INCLUDING BINDING JUMPERING

PROVIDING SINGLE PHASE SERVICE CONNECTION WITH PVC

2.5/4MM2 TWIN CORE CABLE FROM TERMINAL POLE TO METERING

18 9926000018 POINT INCLUDING FIXING OF METER WITH METER EARTHING No.

COMPLETE WORK AS PER STANDARD SPECIFICATION BUT

EXCLUDING COST OF MATERIALS.

PROVIDING THREE PHASE 4 WIRE SERVICE CONNECTION WITH

PVC 4MM2/10MM2 FOUR CORE CABLE FROM TERMINAL POLE TO

19 9926000019 METERING POINT INCLUDING FIXING OF METER WITH METER No.

EARTHING COMPLETE WORK AS PER STANDARD SPECIFICATION

BUT EXCLUDING COST OF MATERIALS.

ADDITIONAL COST FOR EXCAVATION OF PIT IN HARD ROCK AREA

FOR ERECTION OF POLE/ GUY ETC. AS PER STANDARD

SPECIFICATION OVER & ABOVE NORMAL COST COVERED AGAINST

EXCAVATION OF PIT UNDER NORMAL SOIL FOR ERECTION OF

POLE,GUY, DOUBLE POLE STRUCTURE EARTHING WITH THE

APPROVAL OF SUPDT.ENGINEER.

21 9926000021 PROVIDING GUARDING TO HT LINE ON ROAD/ RAIL CROSSING. MTR

22 9926000022 PROVIDING GUARDING OF LT LINES ON ROAD/RAIL CROSSING. MTR

23 9926000023 LT LINE TAPPING- SINGLE PHASE No.

24 9926000024 LT LINE TAPPING- THREE PHASE No.

Stringing/LAYING OF OVER HEAD LT CABLE FOR ROAD

25 9926000025 CROSSING,HT LINE CROSSING AND TELEPHONE LINE CROSSING No.

ERECTION OF SINGLE POLE STRUCTURES WITH , HG

FUSES,TRANSFORMERS, LIGHTENING ARRESTOR, DISTRIBUTION

BOX. ON 8 METERS 200 KGAND PSC POLE INCLUDING EXCAVATION

OF PITS AND REFILLING OF EARTH, CARTING OF TRANSFORMERS

FROM STORES TO SITE, FIXING OF CHANNELS, SUPPORTING

26 9926000026 ANGLES,BRACINGS CROSS ARMS CLAMPS, ANTICLIMBING DEVICES No.

DANGER BOARDS, CONDUCTOR AND CABLE WIRING

ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USED

ON THE POLE AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OFGUY

SETS AND EARTHING.

ERECTION OF SINGLE POLE STRUCTURES WITH MOUNTING OFAB

SWITCH , HG FUSES,TRANSFORMERS, LIGHTENINGARRESTOR,

DISTRIBUTION BOX. ON 9 to 11 METERS RSJ POLE INCLUDING EXCAVATION

OF PITS AND REFILLING OF EARTH, CARTING OF TRANSFORMERS FROM STORES TO

27 9926000027 SITE, FIXING OF CHANNELS, SUPPORTING ANGLES,BRACINGS CROSS ARMS CLAMPS, No.

ANTICLIMBING DEVICES DANGER BOARDS, CONDUCTOR AND CABLE WIRING

ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE POLE AND

NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OFGUY SETS AND EARTHING.

ERECTION OF PSC POLES OF 10 *270 KG INCLUDING EXCAVATION

OF PIT AND REFILLING OF EARTH, FIXING OF CROSS ARMS, TOP

FITTING CLAMPS ANTI-CLIMBING DEVICES, INSULATORS ETC.

28 9926000028 COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON No.

THE POLES AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY

SET AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE OF 10 METERS 270 KG

PSC POLES INCLUDING EXCAVATION OF PITS & REFILLING OF

EARTHING, FIXING OF CHANNELS, SUPPORTING ANGLES,CLAMPS,

ANTI-CLIMBING DEVICES DANGER BOARDS,INSULATORS

ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USED

ON THE POLES AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY

SETS AND EARTHING.(WITHOUT AB SWITCH)

STRINGING OF 100MM2 ACSR/100MM2 AAAC CONDUCTOR FOR

30 9926000030 11/22KV & LT LINES INCLUDING FIXING OFINSULATORS, BINDING

STRINGING OF DOG CONDUCTOR FOR 11/22KV & HT LINES ONE COND

INCLUDING FIXING OF INSULATORS, BINDING JUMPERING ETC. PER KM

ERECTION OF DOUBLE POLE STRUCTURES WITH MOUNTING OF AB

SWITCH, HG FUSES, TRANSFORMERS, LIGHTENING ARRESTORS,

DISTRIBUTION BOX. OF 10 METERS 270 KGAND PSC POLES

INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH,

CARTING OF TRANSFORMERS FROMSTORES TO SITE, FIXING OF

32 9926000032 CHANNELS, SUPPORTING ANGLES,BRACINGS CROSS ARMS No.

CLAMPS, ANTI-CLIMBING DEVICES,DANGER BOARDS, CONDUCTOR

AND CABLE WIRING ETC.COMPLETE AND PAINTING OF FABRICATED

MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF

PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SETS AND EARTHING.

DISMENTALLING OF 8 MTR PSC POLE WITH CREDITING OF

33 9926000033 FABRICATION AT STORE & STACKING OF POLE SAFELY ON ROAD No.

SIDE OR CREDITING TO DEPARTMENTAL STORE

DISMENTALLING OF 10 MTR PSC POLE WITH CREDITING OF

34 9926000034 FABRICATION AT STORE & STACKING OF POLE SAFELY ON ROAD No.

SIDE OR CREDITING TO DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER CENTRE (8 MTR PSC POLE)

(WITH TRANSFORMER) WITH CREDITING OF FABRICATION &

TRANSFORMER AT STORE & STACKING OF POLE SAFELY ON ROAD

SIDE OR CREDITING TO DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER CENTRE (8 MTR PSC POLE)

(WITHOUT TRANSFORMER) WITH CREDITING OF FABRICATION AT

STORE & STACKING OF POLE SAFELY ON ROAD SIDE OR

CREDITING TO DEPARTMENTAL STORE

Item Code Item Unit FY 2024-25

STRINGING OF LT ABC OF 1*35 SQ MM + 1*25 SQ MM INCLUDING

FITTING OF ALL ACESSARIES I.E. SPECIAL DESIGN SUSPENSION /

TENSION CLAMP, FIXING OF CROSS ARM, LT SHACKLE INSULATOR

37 9926000037 ETC. FOR FIXING OF MESSENGER WIRE AND TO PROVIDE SERVICE KM

CONNECTION ON AERIAL BUNCH CABLE BY INSULATED PIERCEING

CONNECTORS THROUGH SERVICE CONNECTION BOX COMPLETE

AS REQUIRED & DIRECTED BY ENGINEER IN CHARGE.

STRINGING OF LT ABC OF 3*50 SQ MM +1*25 SQ MM+1*35 SQ MM

INCLUDING FITTING OF ALL ACESSARIES I.E. SPECIAL DESIGN

SUSPENSION / TENSION CLAMP, FIXING OF CROSS ARM, LT

38 9926000038 SHACKLE INSULATOR ETC. FOR FIXING OF MESSENGER WIRE AND KM

TO PROVIDE SERVICE CONNECTION ON AERIAL BUNCH CABLE BY

INSULATED PIERCEING CONNECTORS THROUGH SERVICE

CONNECTION BOX COMPLETE AS REQUIRED & DIRECTED BY

ENGINEER IN CHARGE.

STRINGING OF 11KV ABC OF 3*95 SQ MM +80 SQ MM INCLUDING

FITTING OF ALL ACESSARIES I.E. SPECIAL DESIGN SUSPENSION /

39 9926000039 TENSION CLAMP, FIXING OF CROSS ARM, BINDING TO PIN KM

INSULATOR,PREPARING SHACKLE POINT,JUMPERS ETC. AS

REQUIRED & DIRECTED BY ENGINEER IN CHARGE

STRINGING OF 22 KV ABC OF 3*70 SQ MM +95 SQ MM INCLUDING

FITTING OF ALL ACESSARIES I.E. SPECIAL DESIGN SUSPENSION /

40 9926000040 TENSION CLAMP, FIXING OF CROSS ARM, BINDING TO PIN KM

INSULATOR,PREPARING SHACKLE POINT,JUMPERS ETC. AS

REQUIRED AND DIRECTED BY ENGINEER IN CHARGE

STRINGING OF LT ABC OF 2*50 SQ MM +1*25 SQ MM+ 35 SQ MM

INCLUDING FITTING OF ALL ACESSARIES I.E. SPECIAL DESIGN

SUSPENSION / TENSION CLAMP, FIXING OF CROSS ARM, LT

SHACKLE INSULATOR ETC. FOR FIXING OF MESSENGER WIRE AND

TO PROVIDE SERVICE CONNECTION ON AERIAL BUNCH CABLE BY

INSULATED PIERCEING CONNECTORS THROUGH SERVICE

CONNECTION BOX COMPLETE AS REQUIRED & DIRECTED BY

ENGINEER IN CHARGE.

DISMENTALING OF RSJ (9/11 METER) POLE AND CREDITING THE

OLD MATERIAL TO STORE

DISMENTALING OF TRANSFORMER CENTER ON 10MTR,270KG PSC

POLE(WITHOUT TRANSFORMER) WITH CREDITING OF FABRICATION

AT STORE AND STACKING OF POLE SAFELY ON ROAD SIDE OR

CREDITING TO DEPARTMENTAL STORE

DISMENTALING OF TRANSFORMER CENTER ON 10MTR,270KG PSC

POLE(WITH TRANSFORMER) WITH CREDITING OF FABRICATION AT

STORE AND STACKING OF POLE SAFELY ON ROAD SIDE OR

CREDITING TO DEPARTMENTAL STORE

DISMENTLING OF 11KV ABC OF 3*95 SQ MM +80 SQ MM AND

45 9926000045 CREDITING FITTING OF ALL ACESSARIES AND FABRICATION TO KM

DEPARTMENTAL STORE

DISMENTLING OF 22 KV ABC OF 3*70 SQ MM +95 SQ MM AND

46 9926000046 CREDITING FITTING OF ALL ACESSARIES AND FABRICATION TO KM

DEPARTMENTAL STORE

DISMENTALING OF LT ABC OF 1*35 SQ MM + 1*25 SQ MM AND

47 9926000047 CREDITING FITTING OF ALL ACESSARIES TO DEPARTMENTAL KM

Item Code Item Unit FY 2024-25

DISMENTALING OF LT ABC OF 3*50 SQ MM +1*25 SQ MM+1*35 SQ

48 9926000048 MM AND CREDITING FITTING OF ALL ACESSARIES TO KM

DEPARTMENTAL STORE.

DISMENTALING OF LT ABC OF 2*50 SQ MM +1*25 SQ MM+ 35 SQ MM

49 9926000049 AND CREDITING FITTING OF ALL ACESSARIES TO DEPARTMENTAL KM

RESTRINGING OF ALL TYPE OF CONDUCTOR (EXCEPT DOG

50 9926000050 CONDUCTOR) FOR 11/22KV & LT LINES INCLUDING FIXING OF

INSULATORS, BINDING JUMPERING ETC.

RESTRINGING OF DOG CONDUCTOR FOR 11/22KV HT LINES ONE COND

INCLUDING , BINDING JUMPERING ETC. PER KM

LABOUR CHARGE FOR THE INSTALLATION OF NEW DTR METER.

(METER WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR THE REPLACEMENT OF DTR METER AND

53 9926000053 OLD METER SHOULD BE CREDITED TO SDN STORE. (METER WILL No.

BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR PROVIDING CT COIL FOR DTR METER

CONNECTION. (CT COIL WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR REPLACEMENT OF CT COIL FOR DTR METER

55 9926000055 CONNECTION AND OLD CT SHOULD BE CREDITED TO SDN STORE. PER CT

(CT COIL WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR FIXING OF MMB FOR DTR METER (MMB

WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR REPLACEMENT OF DTR METER BOX.

(METER WILL BE PROVIDED BY DGVCL)

PROVIDING / REPLACEMENT OF 1.5 SQ MM 10 CORE COPPER

CABLE 3.5 METER (CABLE TO BE PROVIDED BY AGENCY)

LABOUR CHARGE FOR PROVIDING/RECONNECTION OF TERMINAL PER

59 9926000059 CONNECTION WITH PROPER SIZE OF LUGS. (LUGS COST IS BORNE TERMINATI

LABOUR CHARGE FOR THE SPOT READING OF DTR METER WITH

DETAIL SURVEY OF DEFECT IF ANY. A DULY SIGN COPY BY

SURVEYOR PERSON OF AGENCY IN PRO-FORMA REPORT SHOULD

BE SUBMITTED TO SDN OFFICE.(* ONLY IF ALL PARAMETER OF

VOLTAGE, CURRENT & LOAD AS SHOWN IN PER-FORMA IS FILLED)

AS PER THE INSTRUCTION OF ENGINEER IN-CHARGE.

LABOUR CHARGE FOR THE SPOT READING OF DTR METER WITH

DETAIL SURVEY OF DEFECT IF ANY. A DULY SIGN COPY BY

SURVEYOR PERSON OF AGENCY IN PRO-FORMA REPORT SHOULD

BE SUBMITTED TO SDN OFFICE. (DULY FILL PER-FORMA IN FAULT

CONDITION IN WHICH READING PARAMETER IS NOT SHOWN IN

INSTALLATION OF DTR METER INCLUDING METER BOX, PROVIDING

& FIXING OF 1.5SQ MM SINGLE STRAND 10 CORE ARMOURED

62 9926000062 COPPER CABLE (3.5METER), TERMINATION IN METER & COIL No.

ETC.(METER, METER BOX, C.T./P.T. COIL WILL BE PROVIDED BY

INSTALLATION OF DTR METER INCLUDING METER BOX,

TERMINATION IN METER & COIL ETC. (WITHOUT 10CORE COPPER

CABLE) (METER, METER BOX, C.T./P.T. COIL WILL BE PROVIDED BY

Binding of messanger Conductorat with a distance not more than 0.75 mtr

64 9926000064 with 6 turns minimum on XLPE Cable with single strand binding wire No

(including cost of binding wire)

Supply and Installation of 11/22 kV Distribution Transformers HT Terminal

65 9926000086 protector (UV Resistance) with using 95/120/150 sq.mm long barrel PER SET

aluminum lug. (1Set = 3 Nos i.e. on R, Y, B)

Supply & Installation of HT EPR Tap on 11/22 kV Distribution Transformer

with replacement of bare conductor by HT ABC conductor (DO bottom side

to transformer) after removal of semi conductor by HT ABC (6 inch both

side). HT ABC to be supplied by DGVCL. (1Set = 3 Nos i.e. on R, Y, B)

Supply, Installation, Testing and Commissioning of Maintenance Free,

Ready Capsule, Pipe-In-Cage (Pic) Type, Earth Electrodes for HT Feeder

Pole Having 2000 mm Electrode Length as per the Tender Specifications

and Drawing. (All Materials Will Be Supplied By Agency)

Supply, Installation, Testing and Commissioning of Maintenance Free,

Ready Capsule, Pipe-In-Cage (Pic) Type, Earth Electrodes for HT Feeder

Pole Having 3000 mm Electrode Length as per the Tender Specifications

And Drawing. (All Materials Will Be Supplied By Agency)

Supply and Installation of 25 X 3 mm GI Strip having hot dip- galvanized-

zinc coating of 80-100 microns without any joints or welding. Both the end

of the GI strip should be connected with GI nut bolts and required

fabrication work for giving separate earthing connections to

69 9926000090 (1) Neutral of the transformer Meter

(2) MS structures of the transformer center (Approximately 25 meter GI

strip per transformer centre

- as per requirement and instruction of Engineer in- charge) (All

Materials will be supplied by Agency)

Supply and Installation of uPVC standard make Pipe of 1.25" diameter for

covering GI strip with UV protected Cable Ties of 550 X 7.6 mm size to bind

70 9926000092 with pole face(Approximately 25 meter uPVC pipe for GI strip covering per Meter

transformer centre -as per requirement and instruction of Engineer in-

Supply & fixing of upto 33 kV Conductor sleeve for Busbar to Drop out

Fuse and Drop out fuse to Transformer H.T. including Busbar (12 mm

sleeve) as per technical specification. (All Materials will be supplied by

Supply & fixing of upto 33 kV Conductor sleeve for Busbar to Drop out

Fuse and Drop out fuse to Transformer H.T. without Busbar (12 mm

sleeve) as per technical specification. (All Materials will be supplied by

Supply & fixing of upto 33 kV Conductor sleev for Bus bar to Drop out

73 9926000094 Fuse and Drop out fuse to Transformer H.T.including Busba r(15mmsleev) Per TC

as per technical specification. (All Materials will be supplied by Agency)

Item Code Item Unit FY 2024-25

Supply & fixing of upto 33 kV Conductor sleeve for Busbar to Drop out

74 9926000101 Fuse and Drop out fuse to Transformer H.T. without Busbar(15 mm sleeve) Per TC

as per technical specification. (All Materials will be supplied by Agency)

Supply & fixing of Disc type Red Color FRP(Non-flammable)

material with Weather resistant, Non-conductive bird guard OD=300

MM, ID=33 MM, Width =1.25 MM, one

side cut from ID to OD. (All Materials will be supplied by Agency)

Providing and fixing of LT Terminal protectors i.e. Re-useable boot

(LT Side 1.1 Kv) including LT (1.1 kV) insulating taps. All live part at

LT side shall be covered with fixing

of LT insulating taps.

77 Nylon Net around Transformer Center

77.1 9926000097 Nylon Net (12 * 15 ft) Per Net

77.2 9926000098 Nylon Dori Per TC

Labour charge for fitting Nylon Net (All fabricated material for fitting nylon

net shall be provided by DGVCL)

78 9924000001 Cutting of Tree branches surounding HT/LT line Per Tree

Replacement of old jumpers & providing new double jumpers with 8"

binding [D Type] & capsuling with PVC pipe etc

80 9924000005 Support pole for Stay PSC/STP/RSJ No.

81 9924000006 Pin binding of conductor 11/22kv Pin insulator No.

Pin binding of conductor 11/22kv Pin insulator per pole in costle area with

83 9924000008 Pin binding of conductor LT shakel insulator No.

84 9924000009 Replacement of one/both disc.insulator at strain pole No.

85 9924000010 Replacement of LT shackle insulator at cut point No.

86 9924000011 Refixing of V cross Arm No.

87 9924000012 Replacement of V cross Arm (With Transportation & Painting) No.

88 9924000013 Refixing of Top fitting in proper position No.

89 9924000014 Replacement of Top fitting No.

90 9924000015 Replacement of LT cross Arm No.

91 9924000016 Providing DO fuse on DP with carting & jumpuring(ONE DO FUSE) No.

Numburing of pole with paint by preparing back ground of one colour and

have lettering(height 3" * width 0.5") using stensil

93 9924000018 Fixing of MMB(1PH.) at consumer end No.

94 9924000019 Fixing of MMB(3PH.) at consumer end No.

95 9924000020 Replacement of (1ph.) meter for Urban area No.

96 9924000021 Replacement of (1ph.) meter for Rural area No.

painting consumer no. on MMB (Urban) (with letter size height 40mm*

painting consumer no. on MMB (Rural) (with letter size height 40mm*

99 9924000024 Replacement of deteriorated Single phase Service line No.

100 9924000025 Fixing of new dist. Box with complete wiring including clamps,nut bolts etc. No.

Reparing of guarding involving reshaping of bearer wire cross lacing

102 9924000027 Painting of steel fabricated material of RSJ DO DP structure with paint No.

Painting of steel fabricated material of RSJ pole mounted transformer

double pole structure with paint

104 9924000029 Painting of steel fabricated material of RSJ single pole with paint No.

105 9924000030 painting of steel fabricated material of PSC Single pole (HT line) with paint No.

106 9924000031 painting of steel fabricated material of PSC DO DP double pole with paint No.

painting of steel fabricated material of PSC double pole at pole mounted

transformer with paint

108 9924000033 Providing line seperater single phase No.

109 9924000034 Providing line seperater three phase No.

Replacement / Providing of stay insulator along with adjustment of tension

Replacement of deteriorated /providing LT dist. Box with new up to

100KVA capacity & crediting it to store.

Replacement of deteriorated /providing LT dist. Box with new above

100KVA capacity & crediting it to store.

113 9924000038 Adjustment of tension in stay wire No.

114 9924000039 Refitting of LA No.

Converting pin point to Shackle point including dismentaling & restringing

115 9924000040 location

116 9924000041 replacement of 11KV Pin insulator with providing new double pin binding No.

replacement of 22KV Pin insulator by new 11kv pin insulator with spares &

providing new double pin binding

118 9924000043 Providing 11kv double disc insulators with binding & restringing No.

Replacement of existing 11kv conductor (all size) with new double pin

120 9924000046 Plumbing of PSC Pole with straightening at pin point No.

121 9924000047 Plumbing of PSC Pole with straightening at tension point No.

Plumbing of tilted DP structure (PSC/RSJ/STP) with refilling of stone

Providing new 11kv AB /GO switch with fabrication and insulated colour

code jumper, binding, lugs etc

Replacement of old 11kv AB /GO switch with providing new insulated

jumper, binding, lugs etc

Providing cage type loop guard in verticle LT line with using PVC reel

125 9924000052 per pole

Labour charges for replacement /providing of MMB & service with all

accessories for three phase connection

Labour charges for replacement /providing of MMB & service with all

accessories for single phase connection

Dismentalling of existing Dist.X'mer center(RSJ /STP POLE) 25/63/100/200

KVA with all fabrication & creditig the old material to store

Disconnection from LT pole 1 phase

Reconnection from LT pole 1 phase

( payment after receipt of R/C charges)

Disconnection from LT pole 3 phase

Reconnection from LT pole 3 phase

( payment after receipt of R/C charges)

Item Code Item Unit FY 2024-25

Dismentaling & removing of service line from pole & crediting to S/dn (1

Dismentaling & removing of service line from pole & crediting to S/dn (3

135 9924000062 Reconnection of service line complete with PVC cable (1 Ph) No.

136 9924000063 Reconnection of service line complete with PVC cable (3 Ph) No.

Providing spiral type earthing by G.I. NO 8(weight 2kg -5mtr in length) with

salt and coal 10kg each, including pvc rigid pipe 20mm dia( 1.5mtr length)

to pass exposed part of G.I. wire at consumer end with all materials, earth

resistance should be less than 2 ohms

Providing and fixing of signle core 1.5 sq mm single strand copper

insulated cable with cable nail clip for spiral type earthing at consumer end.

The end of G.I. no 8 is to be connected by connector with copper cable of

138 9924000070 which other end shall be connected to the earth terminal of meter box. This per meter

item shall be used in location where there is more distance between earth

terminal and earthing terminal of meter. (All materials supplied by

Stringing of LT ABC of 1*35 SQ MM + 1*25 SQ MM including fitting of all

acessaries i.e. special design suspension / tension clamp, fixing of cross

arm, LT shackle insulator etc. for fixing of messenger wire and inclusive of

dismantling charge of existing bare conductor and crediting in to store &

dismentaling of service line from LT bare conductor and to provide service

connection on Aerial Bunch Cable by insulated pierceing connectors

through service connection box complete as required & directed by

Engineer in Charge.

Stringing of LT ABC of 3*50 SQ MM +1*25 SQ MM+1*35 SQ MM including

fitting of all acessaries i.e. special design suspension / tension clamp, fixing

of cross arm, LT shackle insulator etc. for fixing of messenger wire and

inclusive of dismantling charge of existing bare conductor and crediting in

to store & dismentaling of service line from LT bare conductor and to

provide service connection on Aerial Bunch Cable by insulated pierceing

connectors through service connection box complete as required &

directed by Engineer in Charge.

Stringing of 11KV ABC of 3*95 SQ MM +80 SQ MM including fitting of all

acessaries i.e. special design suspension / tension clamp, fixing of cross

141 9924000067 arm, binding to pin insulator,preparing shackle point,jumpers etc. and KM

inclusive of dismantling charge of existing bare conductor and crediting in

to store complete as required & directed by Engineer in Charge

Stringing of 22 KV ABC OF 3*70 SQ MM +95 SQ MM including fitting of all

acessaries i.e. special design suspension / tension clamp, fixing of cross

142 9924000068 arm, binding to pin insulator,preparing shackle point,jumpers etc. and KM

inclusive of dismantling charge of existing bare conductor and crediting in

to store complete as required & directed by Engineer in Charge

Stringing of LT ABC of 2*50 SQ MM +1*25 SQ MM+ 35 SQ MM including

fitting of all acessaries i.e. special design suspension / tension clamp, fixing

of cross arm, LT shackle insulator etc. for fixing of messenger wire and

inclusive of dismantling charge of existing bare conductor and crediting in

to store & dismentaling of service line from LT bare conductor and to

provide service connection on Aerial Bunch Cable by insulated pierceing

connectors through service connection box complete as required &

directed by Engineer in Charge.

Labour charge for excavation of cable trench of 400mm

width x 1200mm depth, in any type of soil for laying of cable

144 9925000001 of size up to 240 mm2 (For additional cable 200 mm Meter

additional width shall be considered i.e. half trench length is

to be considered)

Labour charge for excavation of cable trench of 600mm

width x 1200mm depth, in any type of soil for laying of cable

145 9925000002 of size up to 240 mm2 (For additional cable 200 mm Meter

additional width shall be considered i.e. half trench length is

to be considered)

Labour charge for excavation of cable trench of 400mm

width x 1500mm depth, in any type of soil for laying of cable

146 9925000003 of size up to 240 mm2 (For additional cable 200 mm Meter

additional width shall be considered i.e. half trench length is

to be considered)

Labour charge for laying of 11kV / 22 kV XLPE Cable of size up to

240 mm2 & preparation of sand layer 100mm thick, in the cable

trench & covering the cable with 150 mm dia (Inner), thickness

mm, 1.0 meter long RCC half round muffs and providing and fixing

of 4inch width yellow colour polyethylene tape with printing

"CAUTION ELECTRIC CABLE BELOW" at 0.75 m depth from

ground surface after laying cable in trench. This will provide

indication that electric cable is passing underground so as to protect

cable from mechnical injuries, refilling the same, as per Instruction of

Engineer in Charge (EIC).

Labour charge for horizontal drilling using Auger machine without

damage to surface road at max 2.0 mtrs depth & putting of

kg/cm2 , class-4,Green color, 110mm O.D. , 8.5mm thickness

H.D.P.E. pipe confirms to IS 4984-1987(3rd revision) and BIS

certification and laying of 11KV/22KV XLPE cable of size up to

148 9925000005 mm2 in HDPE pipe, as per Site Condition (excluding cost of pipe). Meter

The detail map obtained from HDD machine and excell sheet(hard

and soft copy) indicating the respective depth and distance from

adjacent landmark for each segment for HDD is must required to be

submitted. HDD to be carried out at depth 1.5 mtrs to 2.0 mtrs as per

site conditions and as per instruction of EIC.

Item Code Item Unit FY 2024-25

Labour charge for horizontal drilling manually without damage to

surface road at max 2.0 mtrs depth & putting of 6.11 kg/cm2 , class-

4,Green color, 110mm O.D. , 8.5mm thickness H.D.P.E. pipe

confirms to IS 4984-1987(3rd revision) and BIS certification and

laying of 11KV/22KV XLPE cable of size up to 240 mm2 size, as

per Site Condition (excluding cost of pipe). The detail map and excell

sheet(hard and soft copy) indicating the respective depth and

distance from adjacent landmark for each segment of cable to be

submitted. Drilling to be carried out at depth Minimum 1.2 mtrs to

2.0 mtrs as per site conditions as per instruction of EIC.

Supply of 6.11kg/cm2 , class-4,Green color, 110mm O.D.

8.5 mm thickness H.D.P.E. pipe confirms to IS 4984 and BIS

certification for laying of underground 11KV / 22KV XLPE

cable up to 240 mm 2 size.

Labour work for RCC concreting on disputed location and

repairing of damage portion of road crossing for the work

carried out for roads crossing as well as concreting & muffing

of ploes including all materials (1:2:4)

Providing & fixing concrete stone route marker of 300 mm width x

150 mm thick x 650 mm height embedded in earth at least 300 mm

below & 350 mm above ground level respectively at distance approx

50 meters along the length of cable. The RCC concreting (1:2:4)(all

necessary maeterials will be in bidder's scope) of route marker is to

be carried out 300 mm width x 150 mm thick x 300 mm below

ground level as per instruction of EIC. The route marker should

be with name of company with approved yellow colour-DGVCL. The

distance from marker to cable and cable depth with feeder name

etc., marked with arrow sign is to be painted on it.The route marker

is to be fixed at location near to any fixed permanent location (not

necessary to fix exact on top of cable) as per instruction of EIC.

Erection of D.P. (double pole) structure using 9 / 11 Mtr. RSJ

pole with cable connection arrangement along with fitting of

153 9925000010 necessary fabrication for 11KV cable including excavation of No.

pit & refilling of earth as per instruction of EIC. (Exclusive of

concreting & muffing of poles)

Erection of Single pole structure using 9 / 11 Mtr RSJ pole

with cable connection arrangement along with fitting

154 9925000011 ofnecessary fabrication for 11KV/22 KV cable including No.

excavation of pit & refilling of earth as per instruction of EIC.

(Exclusive of concreting & muffing of poles)

Erection of D.P. (double pole) structure using 8.0 Mtr. PSC

pole with cable connection arrangement along with fitting of

155 9925000012 necessary fabrication for 11KV cable including excavation of No.

pit & refilling of earth as per instruction of EIC. (Exclusive of

concreting & muffing of poles)

Erection of Single pole structure using 8.0 Mtr PSC pole with

cable connection arrangement along with fitting ofnecessary

156 9925000013 fabrication for 11KV/22 KV cable including excavation of pit & No.

refilling of earth as per instruction of EIC. (Exclusive of

concreting & muffing of poles)

Labour charge for erecting of 11kV / 22 kV XLPE cable of

157 9925000014 size up to 240 mm 2 on DP Structure with fixing of 02 Nos Per Job

polymer cleats on top and middle part.Polymer cleats, nut

bolts etc. fixing material to be provided by contractor.

Providing & fixing of 6.11kg/cm2 , class-4,Green color, 110mm O.D.

, 8.5mm thickness H.D.P.E. pipe confirms to IS 4984 and BIS

certification on the erected DP structure for the mechanical

protection of cable by inserting the cable inside HDPE pipe. The

HDPE pipe shall be erected in such a way that 300mm shall be

below the ground level and the rest 2700 mm shall be supported

on the DP Structure with 01 No Polymer cleat.All materials

including polymer cleat and Nut bolt to be provided by contractor.

Providing and fixing of pipe type earthing from 80 mm dia class-B GI

pipe with pit to be filled with salt & coke and construction of chamber

159 9925000016 as per DGVCL Drg. No. dg /100 for DP and cable. The earthing pit No.

should be joined with cable by G.I. strip of size 1” width & 2 mm

thick. All material GI pipe, Coke, Salt etc will be supplied by bidder.

Supply & fixing of heat shrink type end terminations (outdoor) for

160 9925000017 upto 11kV 3C x 185 mm2 size XLPE cable as per DGVCL technical No.

Supply & fixing of heat & shrinkable end terminations (outdoor) for

161 9925000018 upto 22 kV 3C x 185 mm2 size XLPE cable as per DGVCL technical No.

Item Code Item Unit FY 2024-25

Supply & fixing of heat shrink type end terminations (indoor) for upto

162 9925000019 11kV 3C x 185 mm2 size XLPE cable as per DGVCL technical No.

Supply & fixing of heat & shrinkable end terminations (indoor) for

163 9925000020 upto 22 kV 3C x 185 mm2 size XLPE cable as per DGVCL technical No.

Supply & fixing of heat shrinkable straight through joint for upto 11kV

164 9925000021 3C x 185 mm2 size XLPE cableas per DGVCL technical No.

Supply & fixing of heat shrinkable straight through joint type for upto

165 9925000022 22kV 3C x 185 mm2 size XLPE cable as per DGVCL technical No.

Labour charge for excavation of 2100mm long x 1200mm wide x

1200 mm deep joint pits for installation of 11kV / 22kV Straight

166 9925000023 through joints as per instruction of engineer-in-charge & covering the No.

cable with 150 mm dia (Outer), thickness 25 mm, 1.0 meter long

RCC half round muffs & refilling same as per instruction of EIC .

Providing and fixing of insulating bus bar, made from 11KV/22KV

XLPE cable after removal of semi conducting layer and applying of

PVC heat shrinkable anti-tracking core insulating tubing (1.1KV), on

both end terminal using Aluminium long barrel heavy duty up to

167 9925000024 sq mm lugs, Aluminium bus connector. Taping with PG- clamp for No.

bus conductor as per drawing and as per instruction of EIC. The

Alluminium lugs and PG clamp shall be covered with 11KV/22KV HT

insulating tapes.(11KV/22KV XLPE cable will be in scope of DGVCL

while all other materials will be in bidder's scope)

Testing of cable at various points and commissioning the feeder as

168 9925000025 per instruction of engineer-in-charge.Test result shall be submitted No.

by contractor with bill.

Preparation and submission of 6 (six) copies, of complete layout

169 9925000026 drawings with GIS mapping as per actual cable routing showing road Set

crossing, HDPE pipe sleeving, jointing locations, markers etc.

Providing and fixing of Sign Board at junction point Made out of

mm aluminium sheet size 750x300 mm (2.5 x 1ft) rectangle, as per

design, pre treated with phosphate process and acid etching coated

with one coat of epoxy primer and two coats of best quality paints,

refloctrorised with Hi-Intensity retro – reflective sheeting as per the

latest and frame fabricated from suitable size iron angle. The Sign

Board is to be fixed on the base prepared from channel and bracing

angles which is grouted by means of cement concreting of 1:2:4 for

size of 300 mm dia x 800 mm height (500 mm to be grouted in

ground). The details to be displayed on sign board will be given by In-

charge Engineer.

(a) Hi intensity Micro prismatic Grade

Providing and fixing of Sign Board (Danger Board) on Distribution

Transformer Centers

Made out of 2mm aluminium sheet size 300x300mm (1x1ft) as per

design, pre treated with phosphate process and acid etching coated

with one coat of epoxy primer and two coats of best quality paints,

refloctrorised with Hi-Intensity retro-reflective sheeting as per the

latest and frame fabricated from suitable size iron angle. The Sign

Board (Danger Board is to be fixed at the location as per instruction

of In-charge Engineer.

(a) Hi intensity Micro prismatic Grade

Providing & fixing of aluminium tag of size 250 mm (L) x 75 mm (W)

from 3 mm aluminium sheet along with 1.0 mm dia aluminium

binding wire for fixing of aluminium tag near end termination joint at

DP structure for identifyng the cable. The details of feeder i.e. 11 /

22 KV with feeder name shound be punched on the tag by letter

punch of size 16 mm as per instruction of In-charge Engineer.

Supply & fixing of heat shrink type end terminations (outdoor) for

173 9925000030 11kV 3C x 240 mm2 size XLPE cable as per DGVCL technical No.

Supply & fixing of heat & shrinkable end terminations (outdoor) for

174 9925000031 22 kV 3C x 240 mm2 size XLPE cable as per DGVCL technical No.

Supply & fixing of heat shrink type end terminations (indoor) for

175 9925000032 11kV 3C x 240 mm2 size XLPE cable as per DGVCL technical No.

Supply & fixing of heat & shrinkable end terminations (indoor) for

176 9925000033 kV 3C x 240 mm2 size XLPE cable as per DGVCL technical No.

Supply & fixing of heat shrinkable straight through joint for 11kV 3C x

240 mm2 size XLPE cableas per DGVCL technical specification.

Supply & fixing of heat shrinkable straight through joint type for 22kV

178 9925000035 3C x 240 mm2 size XLPE cable as per DGVCL technical No.

Installation, Testing and commissioning of 11 KV,630 A SCADA

Compatible, RRL type- 3 Way RMU including Two numbers of

earthings as per Drawing (material is in bidder's scope) and as per

DGVCL Technical specification.

Installation, Testing and commissioning of 11 KV,630 A SCADA

Compatible, RRLL type- 4 Way RMU including Two numbers of

earthings as per Drawing (material is in bidder's scope) and as per

DGVCL Technical specification.

Installation, Testing and commissioning of 22KV,630 A SCADA

Compatible, RRL type-3 Way, RMU including Two numbers of

earthings as per Drawing (material is in bidder's scope) and as per

DGVCL Technical specification.

Item Code Item Unit FY 2024-25

Installation, Testing and commissioning of 22KV,630 A SCADA

Compatible, RRLL type-4 Way, RMU including Two numbers of

earthings as per Drawing (material is in bidder's scope) and as per

DGVCL Technical specification.

Construction of plinth for 11KV, RRL type- 3 Way (i.e Two numbers

of Isolator & One number of Breaker) Ring Main Unit as per

DGVCL's technical specification mentioned in drawing no: Drg. 11kv-

01. All required material will be supplied by contractor.

Construction of plinth for 11KV, RRLL type- 4 Way (i.e Two numbers

of Isolator & Two number of Breaker)Ring Main Unit as per

DGVCL's technical specification mentioned in drawing no:Drg. 11kv-

02.All required material will be supplied by contractor.

Construction of plinth for 22KV, RRL type- 3 Way (i.e Two numbers

of Isolator & One number of Breaker) Ring Main Unit as per

DGVCL's technical specification mentioned in drawing no: Drg. 22kv-

01. All required material will be supplied by contractor.

Construction of plinth for 22KV, RRLL type- 4 Way (i.e Two numbers

of Isolator & Two number of Breaker)Ring Main Unit as per

DGVCL's technical specification mentioned in drawing no:Drg. 22kv-

02.All required material will be supplied by contractor.

Modifications e.g.Providing and fixing of Terminal protectors i.e. Re-use

able boot (HT Side 11/22KV, LT Side 1.1KV) including 11/22 KV insulating

taps and L.T.(1.1 KV) insulating taps ,Busbar, Tapping from Bus Bar

(11/22 KV XLPE cable) through P.G. Clamp for H.T. Jumper to D.O. Fuse

to bushings of Transformer Center, providing & Fixing of jumper and

providing & fixing of Heat Shrinkable Anti Tracking Core Insulating Tubing

187 9925000046 (Insulation Level 11/22 KV) in H.T. jumper , Clamping arrangement of cable No.

support frame on both side of existing Over Head type Distribution

Transformer to utilize in Under Ground cable network as per drawing & as

per instruction of Engineer incharge. All live parts i.e. PG-Clamp,

connections of D.O.fuses, HT bushings etc . shall be covered with fixinng

of 11/22 KV HT insulating tapes. ( 11/22 KV XLPE cable will be in scope of

DGVCL while all other materials will be in bidder's scope ) .

Laying of any size of 11/ 22 KV XLPE /PILC Cable in redaymade trench or Per Cable

in open space Per Mtr

189 9925000060 Labour charges for Lying of O/H XLPE cable pole to pole KM

Supply of 150 mm dia (Inner), thickness 25 mm, 1.0 meter long RCC half

191 Dismental OF 100MM2 AAAC CONDUCTOR KM

Binding of messanger Conductorat with a distance not more than 0.75 mtr

192 9926000064 with 6 turns minimum on XLPE Cable with single strand binding wire NO

(including cost of binding wire)

193 Supply and fixing of Suspenssion clamp to Hold the cable (J-Hook) NO

1.DGVCL will provide key material like M.S. materials,ABC/Bare conductors,PSC/RSJ

Poles,Insulators,Fabricated

materials etc. to the contractor.

2.All fabricated items shall be fabricated as per DGVCL approved drawing and by welding

rods confirming to the relevent ISI specification and as directed by Engineer in charge.

3.Necessary electricity connection for fabrication items shall be provided by DGVCL on

payment of required charge for connection & electricity bill of the same shall be paid by

4.All the rates are inclusive of PF & Exclusive of GST applicable time to time.

194 5.All steel material are to be painted as below:

(a) Scrubbing of rusted surface properly before applying the paints on to the RSJ poles &

steel fabricated materials of RSJ/PSC poles is must required.

(b) Two coats of approved ISI mark red oxide (primer) is to be properly painted for the

RSJ poles & steel fabricated materials of RSJ/PSC poles.

(c) Two coats of approved ISI mark silver paint (i.e. triple mangoes or equivalent quality

silver paint) is to be properly painted on to the RSJ poles & steel fabricated materials of

6.BidderwillhavetoprovideastickeronHDPEPIPEatcablerisinglocationdescribingrouteofcabl

easperinstructionofEngineerIn-charge.

EXECUTIVE ENGINEER

Surat Rural Division