REPAIR TO ROOFING ROLLING SHUTTERS POST CONSTRUCTION ATT PERIODICAL SERVICES AND VARIOUS MISC WORKS TO CERTAIN BLDGS IN TECH AREA AND PERIODICAL SERVICES REPAIR TO ROLLING SHUTTERS FLOORING JOINERY AND MISC WORKS AT SK RANGE UNDER GE AF HALWARA

Amount

Taking down chowkhats or frame of any description (without taking off shutter from the frame) area n. exc 1.5 sqm complete all as specified and directed.

All as per Sl item No 1 above but exc 1.5 sqm and n. exc 4 Sqm

Dismantling wrought iron work or mild steel work of any description not otherwise provided for complete all as specified and directed.

Taking down of shutter of any description of exc 1 sqm but n. exc 2 sqm each leaf complete all as specified and directed.

All as per Item Ser No. 04 above here-in-before but n. exc 1 Sqm

Hacking out broken glass (any size shape, thickness, quality or description) from wooden/metal frame glazed with putty or fixed with beads having area not exc 0.50 sqm in each pane complete all as specified and directed.

Taking up or down 15mm bore steel water tubing and connection including cleaning for re fixing or removal to store complete all as specified and directed.

All as per Sl item No 7 above but 20mm bore

Taking down cement plaster on brick or stone walls etc, including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving’s n exc 15cm thickness below or above ground level & removal out side MoD land complete all as specified and directed.

Dismantling floor hearth or wall tiles including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises of MoD complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness including cover fillets of any description all as specified and as directed

Demolition of Brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified

Dismantling of AC/fibre glass translucent corrugated or semi corrugated sheet including ridges, hips, valley etc of any description and thickness in roof coverings all as specified and as directed

Dismantling of plain or corrugated steel sheets of any gauge, thickness in any position all as specified and as directed

Preparation of old decorated plastered & unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot mould moss and efflorescent salts trading oil and greasy spots, filling holes cracks with wall care putty all and applying a coat of white wash complete all as specified and directed

All as per Sl item No 16 above but on ceiling surfaces

All as per Sl item No 16 above but one coat of distemper oil emulsion on wall

Complete removal of existing treatment of walls by brooming down or steel wire brushing, scrapping down smoke soot mould moss and efflorescent salts trading oil and greasy spots, filling holes cracks with wall care putty all and applying two coat of distemper oilemulsion on wall complete all as specified.

M & L for preparation of old painted wood or wooden based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified

All as per Sl item No 20 above but on steel and iron surfaces

S & F 105x60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including filling hollow portion of frame with PCC 1:3:6 type C0 (using 12.5mm graded stone aggregates) complete all as specified and as directed

S&F 40 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides complete all a sspecified and as directed.

S & F Solid PVC door frame of size 50mm x 47 mm made ot of 5 mm plain colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing complete all as specified and directed.

Supply and fixing factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for TOP rail Panelling of plain colour PVC sheet to be fitted in MS Frame welded/sealed to the stiles & rails with suitable PVC shet beading and jointed together with solvent cemnt supply and fixing in frame complete all as specified and as directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S&F in repairs 1.25mm thick mild steel ,plain black sheet in wall cladding , steel gates and similar work cut to size holes punched including round headed screws, dlout nails or rivets and fixed and required welding complete all as specified and directed.

S & F in repair steel window 1.25 mm thick box type (primer coated) ERW hollow P section of size 60mmx25mm single rebated comprises glazed skeleton shutter including guard bars ERW sec 50mmx20mm and 1mm thick with two openable leaf consisting two Nos sash bars of T-section 20mmx3mm complete welded to frame with one verticle mulion of ERW box type T-section of size 60mmx25mm and 1.25mm thick incl cutting holes and making good dismantled portion PCC (1:2:4) type B-1 four Nos for Each window) including following fittings welded to frame shutter: - (a) Hold fast, 150mm long of 12mmx3mm made to shape-02 Nos per window. (b) Handle of z section 20mmx25mm, 100mm long 01 Nos per leaf (c) MS tower bolt 150mm long-2 Nos per leaf (d) z section 20mmx25mm, 100mm long stopper - 01 No per leaf (f) MS pintal hinges of size 75mmx12mm- 2 Nos per leaf (g) M S guard bars 12 mm square bars @ 150 mm C/C fixed horizontally (h) Fabrication & fixing arrangement as per Drg No CEJZ/TD-06/07. make/manufacture by 1. M/S Tee Pee enterprises, Amritsar 2. M/S Ram Fabricator 'P' ltd Panchkula. Note: glass and painting shall be measured & paid separately under appropriate item.

S&F in repairs framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars complete all as specified and directed.

S&F Powder Coating aluminium frame for doors, windows, (minimum thickness of powder coating 50 micron) ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S & F Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, zing clips, ruber neoprene packing, handles 2 Nos in each door,tower bolt, hinges, anodised aluminium snap beading screws complete all as specified (minimum thickness of powder coating 50 micron)

S & F Powder coating aluminium window and ventilator shutters,side hung/fixed type without sash bars, aluminium section weighing 0.55 kg/ m including necessary joining cleats, zing clips, ruber neoprene packing, anodised aluminium snap beading screws anodised aluminium fittings such as peg stay, Tower bolt 150mm long 1 No. hinge type B-21 100 mm long 2 Nos, suitable handle 1 No complete all as specified and as directed (minimum thickness of powder coating 50 micron).

Supply and fixing power coated Anodised aluminium grill of any pattern fixed to the window frame with screws , cutting the grill to proper opening size for fixing and operaton of handles complete as per requried and direction of Engineer-in-charge

S&F 9mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination &, fixed with screws to aluminium door complete all as specified and directed.

S & F Stainless steel steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 7-8mm thick hollow PVC wall lining of any color ,PVC sheet inclusive of solvent cement and all other accessories compete all as specified and as directed by Engineer-in-Charge.

S & F in repairs 150mm long aluminium anodised, barrel tower bolt of extruded section and fixed complete all as specified and directed.

S & F 150mm long aluminium anodised, barrel tower bolt of extruded section and fixed complete all as specified and directed.

All as per Sl item No 39 above but 125 mm

S & F in repairs 150mm size extruded section aluminium alloy handles, fabricated type anodised complete all as specified and directed.

S & F 150mm size extruded section aluminium alloy handles, fabricated type anodised complete all as specified and directed.

All as per Sl item No 42 above but 125 mm

S & F300mm long alumunium alloy sliding door bolt with hasp & staple and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S & F in repair 300mm long alumunium alloy sliding door bolt with hasp & staple and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S & F 100mm long mild steel butt hinges cold rolled medium weight complete all as specified and directed.

S&F Door closer Cast iron body hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

All as per Sl item No 47 above but fixed in repairs

S & F Aluminium Mortice lock vertical type 100mm 4 Levers complete all as specified and directed.

S & F 4 mm thick sheet glass ordinary quality and fixing in frame with glass putty or fixed with wooden beads having area of any description in each pane complete all as specified

All as per Sl item No 50 above but 3mm thick

S &F in repairs MS coloured hollow curtain rod 19/20 mm dia with two Nos decorative type brackets knobs for each rod of length not exceeding 1.80 mtr including fixing with suitable arrangements including taking down existing complete all as specified and directed.

S & F 750 Ltrs capcity Rotational moulded polythylene water storage tank (Cylindrical vertical with closed top) triple layer wall construction, hoisted and fixed in position all as specified in SSR Part-I including dismantling existing water tank complete all as spcified as as directed.

S & F in repairs 20 mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S & F in repair wash down water closet (Pedestal pattern) including seat cover and connection to drain pipe (outgoing pipe) and to flush pipe, antisyphonage pipe etc complete all as specified.

S&F in repair vitreous china urinal half stall type white excluding flushing cistern, flush pipe and waste pipe but including providing and fixing of plugs, bedding urinal against the wall with cement mortar 1:2 securing urinal to plugs with and including 60 cm long brass screws pointing around urinal back in cement, fixing grating and unions and discharge pipe complete all as specified and directed.

S&F in repair vitreous china squatting pan Orissa pattern of size 580x440mm white with integral foot rest excluding flishing cistern and flush pipe complete including provision of cement concrete 1:5:10, type E-2 using 40mm graded aggregates in bedding complete all as specified and directed.

S&F 10 ltrs capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S & F in repair vitreous china wash hand basin white flat back size 550mmx400m excluding , waste chaina and plug and porcelain stopper but including brackets, cutting for and pinning in ends of brackets or erecting stand , fancy type pillar taps cast copper alloy chromium plated of 15mm bore, wate coupling and waste pipe complete all as specified.

S & F in repairs 15mm bore fancy type pillar taps cast copper alloy chromium plated Swan neck screwed down high pressure with crutch or butterfly handlecomplete all as specified and as directed

S & F in repairs 15mm bore fancy type stop valve cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle complete all as specified and as directed

S & F in repairs 15mm bore fancy type bib tap cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle for iron pipe or brass ferrule complete all as specified and as directed

M & L for 15mm bore GI tubing medium grade with all fittings complete fixed to wall, ceiling or laid in floors complete all as specified.

All as per Sl item No 63 above but 20mm bore

Fixing only 15mm bore GI tubing of any grade with all fittings complete fixed to walls, ceilings or laid in floors in old or new position complete all as specified

All as per Sl item No 65 above but 20mm bore

S&F in repairs brass chromium plated Tubular towel rail, 20mm dia, 60 cm long bitween flange fancy type

S&F 450mm long PVC connection pipe 15mm dia with PTMT nut complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

M&L for 25mm thick cement concrete type B-0 using 12.5mm graded crushed stone aggregate as in sub base finished even and fair surfaces without using extra cement complete all as specified and directed..

M&L coloured joint less Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and screed bed or bedding layer of mortar 15mm thick for laying floor finished in CM 1:6 complete all as specified and directed.

Allas per Sl item No 71 above but in vertical surfaces as Dedo/Skirting and rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 rough finished surfaces to receive tiles

M&L Vitrified ceramic tiles light shade10 mm thick (Square/Rectangular) polished area of ech tiles n. exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles and screed bed or bedding layer of mortar 15mm thick for laying floor finished in CM 1:6 complete all as specified and directed.

All as per Sl item No 73 above but as in skirting, dados/Vertical surfaces and rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 rough finished surfaces to receive tiles

M&L for Coloured Glazed ceramic tiles 300x200x7mm/450X350X7mm thick in vertical surfaces etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 rough finished surfaces to receive tiles complete all as specified and directed..

M&L 75mm thick Cement concrete type B- 2,1:2:4 (40mm graded aggregate) as in sub base or similar work finished fair and even complete all as specified and directed.

M & L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in With grey cement and no pigment and screed bed or bedding layer of mortar 15mm thick for laying floor finished in CM 1:6 complete all as specified and directed.

S & F in repairs Anodised aluminium snap grid frame work for false ceiling, size of grid 605x605mm including hangers, cleats, fastenerscomplete all as specified and as directed

S & F Gypsum Board 8mm thick in ceiling fixed with screw as per manufacturers instructions, 60x60cm in size all as specified and as directed

M & L for bricks works with sub class 'B' bricks straight or curved on plan exc 6m mean radious, built in CM 1:6 complete all as specified and directed. .

All as per Sl item No 80 above but except bricks Note : Serviceable bricks obtained from demolition/dismantling shall be reused in the work after cleaning.

M&L for rendering 12 mm thick plaster in CM (1:6) on brick or concrete surfaces, finished even and fair without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces, using WPC all as specified and directed & finished even and smooth without using extra cement

M&L for rendering 5mm thick on fair faces of ceiling in CM 1:3 finished surfaces even and smooth without using extra cement complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-290 (Gde E-165) complete all as specified and as directed

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixing with self taping screws complete all as specified and as directed

S & F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F 0.80mm thick Galvanised, corrugat mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 fixed with L-type or J-type or cranked hook bolts in lieu of screws complete all as specified and directed.

S & F in repair 1.25mm thick steel rolling shutters with ball bearing , guide channel as specified including top covers anchoring rod, hasp and staple and one shop coat of primer erect in position as indicated complete push or pull or manual type having thickness of laths 1.25 mm including taking down/ dismantling of unserviceable rolling shutter complete all as specified and as directed

All as per Sl item No 89 above but gear operated type with bevel gear box and crank handle including Safety lever locks mild steel with 4 levers

Repairing gear operated rolling shutterof any opening after minor welding, straighting, easing, adjusting, greasing and making good the disturbed surfaces complete all as specified and directed..

All as per Sl item NO 90 above but of manual operated

S & F in repair springs of manually operated rolling shutter complete all as specified and as directed including taking down shutter complete all as specified and directed..

M&L for preparation of new plastered surfaces of walls, applying birla putty compound, one coat of primer coat & two coats of distemper oil emulsion, white or tinted, complete all as specified and as directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and as directed.

M&L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint complete all as specified

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over on coat of red oxide primer in camoflaging pattern to match with the existing pattern using min 3 or 4 tint or in any color, complete all as specified and as directed complete all as specified

M&L for preparation of new plaster surfaces of wall and applying two coats of synthetic enamel paint over a coat of solvent base primer in camoflaging pattern to match with the existing pattern using min 3 or 4 tint, complete all as specified and as directed.

Dismantling Brick tiles or terracing tiles, single layer on roofs complete all as specified and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for roof complete all as specified and directed.

M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry @ 3.00 Kg/Sqm complete all as specified and directed.

M&L for avg 40mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) PCC padding to be provided to maintain slope complete all as specified and directed.

M&L for screeding 10mm thick on fair faces of concrete surfaces cm 1:4 with water proofing compound as per manufacturer's instructions, finished even and fair complete all as specified and directed.. Note : water proofing compound will measured and paid separately under other item

Supply only Integral waterproofing compound

M&L for preparation of roof top surfaces, providing and applying single component elastic cold applied polyurethene modified acrylic roofing system ,co elastic technology (CET) based on modified polyurethene and fully fibre reinforced , having Sun Reflectivity index (SR) of 106 on top of concrete roof surfaces. All cracks upto 3 mm at corner joints, channel and parapets should be treated with crack seal . Applying three coats including one coat of primer of Shali Urethne BTD/ Sikalastic 560/ smart care damp proof ultra having coverage @ min 0.75kg/m2 and dilution upto 10% and laying reinforced fibre net and applying two coats of of shaliurethene BTD/Sikalastic 560/smart care damp proof ultra @ total consupmtion 2 kg/m2 in two coats for maintaining minimum dry film thickness 1.5mm and elongation at break of free film of approx 350%. The materials shall be applied with brush or roller, complete in all respect as per the direction of Engineer-in-charge/Consultant (Note :6 Hrs interval between two coat will be mantain ) . All auxilary and accessories involved during applacation should be supplied by single manufacturer as a part of system. Make: STP/Sikka/Asian paint or equvalent as approved by GE. (i) The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators duly approved by GE in writing. (ii) 5% amount of the total amount of water proofing treatment shall be retained as a guarantee and shall be released after 10 years. However contractor may deposit the FDR of same amount in favour of GE. If contractor fail to rectify the defect pointed out during this period in writing, the defect shall be got rectified at contractor' risk and cost and the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee. The contractor's quoted rates for this item shall deemed to be inclusive of this aspect

Demolition and breaking up rainwater pipes including bands and other items of any description complete all as specified and directed.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts complete all as specified and directed.

S&F 110mm dia bore PVC (SWR) pipe single socketed in any length with rubber ring jointes fixed to walls complete all as specified and directed.

S&F 110 mm dia bore PVC (SWR) bends complete all as specified and directed.

M&L for Elegant tile of any color made of perforated Cement Fibre composite 595x595/295x1195/595x1195x5mm with square edge density 1050kg/m3 covered with absorbtive microfiber coating on the front side and Acoustics fibre on the back side,water resistance, fire resistant, absorption coffecient upto upto 0.89 at 160 Hz tested as per ISO 354. The tiles are anti sag and are to be installed on T24 grid system of 0.6mm thick ,Main 'T' length minimum 3000mm, web minimum 35mm to be placed at 600mm centre to centre and secondary cross 'T' of length 600mm, web minimum 35 mm, inter locked, Wire Support for Main T to be taken at every 1200mm length wise and 600mm width wise,witth a backing of 50mm 1000 GSM thick absorbwool tested as per Fire Retardant IS 15061-2002 for excellent results. Note: Rate to be quoted by contractor includes all framework item and other connecting items.

M&L for cement fibre elegant wood tile of any color ,600x600/600x1200x5mm with square edge density 1050kg/m3 covered with absorbpttive microfiber coating on one side and accoustic fibre on other side, thus making it water resistance, fire resistance at 160hz tested as per ISo 354 and accousticaly absorptive . The tiles are anti sag and are to be installed with Aluminium H profile directly installed on walls Note: Rate to be quoted by contractor includes all framework item and other connecting items.

M&L for preparation of old treated surfaces of any description over 10cm width or girth not otherwise described over, applying one coat in camouflage pattern using minimum 3 different approved tint/ colour of synthetic enamel paint complete all as specified.

M&L for preparation of old painted surfaces of steel and iron of any description over 10cm width or girth and applying one coats of synthetic enamel paint using minimum 3 or 4 different approved tint/ colour as approved by GE complete all as specified.

S&F annodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S & F annodised aluminium window and ventilator shutters,side hung/fixed type without sash bars, aluminium section weighing 0.55 kg/ m including necessary joining cleats, zing clips, ruber neoprene packing, anodised aluminium snap beading screws anodised aluminium fittings such as peg stay, Tower bolt 150mm long 1 No. hinge type B-21 100 mm long 2 Nos, suitable handle 1 No complete all as specified and as directed (minimum thickness of powder coating 50 micron).

Deol Builders