NIBMG/Furniture/2026-27/018

Single Bed Length: 2100 mm x Width 900 mm, Thickness of Head Board and Leg Board will be (19+19+1+1) mm comprising on 19 mm BWR Ply (Sylvan/ Century/ Green) pasted over parallel with Adhesive (Fevicol) finished with 1 mm Laminate (Aica / Formica / Greenlam) both side . Size of Head Board: 900 mm (W) x 750 mm (Ht.) & Leg Board: 900 mm (W) x 600 mm(Ht.) Side Connector will be 125 mm x 41 mm Sal Wood and outer side of which will be finished with 6 mm Ply with 1 mm Laminated. 03 no of Tana (s) between two connector made of 50 x 37 mm Sal Wood, Bed top: Made by 19 mm BWR Plywood. All exposed edges and teak wood beading will be polish finish.

Supplying and fixing Study Table, Size : 1350 mm (L) x 600 mm (W) x 750 mm (H) made of 19 mm Thick BWR Ply with 1 mm laminate and inside polish finish. Modesty (Ht: 600 mm) will be made of 12 mm thk. BWR ply. Table will have 1 no lockable drawer operating on telescopic channel (Size: 400 mm L x 150 mmH x 450 mm (D) and 1 no. pedestal (Size: 400 mm L x 450 mmH x 450 mm (D) at right hand side. All exposed edges and teak wood beading will be polish finish.

Supplying and Fixing 2 Door Wardrobe of size : 2100 mm (H) x 900 mm (L) x 600 mm (D) having 2 shelves and 3 compartment ,1 locker (300 mm Ht x 300 mm L x 600 mm D) and 1cloth hanging rod made of 1" dia 20 swg SS 304 pipe. Total structure made of 19 mm thk BWR Ply (Sylvan / Century / Green) with 1 mm Laminate and inside polish finish. Back side will be made of 6 mm thk BWR Ply. One door will be fitted with mirror size: 48¾ " (H) x 13¾ " (W) with beat outside. All exposed edges and teak wood beading will be polish finish.

Supplying and Fixing wall hanging Rack- Open Type having 4 nos. compartment made of 19 mm BWR Ply (Sylvan / Century / Green) & back side with 12 mm ply . Size: 1350 mm (L) x 300 mm (D) x 750 mm (Ht.). Inside and teak wood beading will be polish finish.

Chair made of standard C.P Teak wood, with arm. Back Leg-2"x1.5"x3'2"(From Floor Back Top)- 2 nos. Front Leg-2"x1.5''x1'5"-2 Nos. Back-1.5"x 3/4"- 4 Nos. (Vertical Curve Connector); 3"x1"x1.6"- 1 No. Top runner (Below Seat)-3"x 1"x required length 4 Nos; Bottom connector- H Shape with 1"x1" are required size. Seat width front side-22" Seat width Back side-18" seat- 3/4" thick plunk with 2 No. joint. Seat Depth-18"with complete polish.