Construction of 01 Class room in Sara Bhil faliya Primary School @ Village Sara Ta, Vansda Dist.Navsari

Name of Work:- New Gujrat Pattern 2025-26 Construction of 01 Class room in Sara Bhil faliya Primary

School @ Village Sara Ta, Vansda Dist.Navsari.

: : BILL OF QUANTITY.' : :

Percentage Rate Tender

It. Description of Item (with brief Specification and Rate In

Quantity Unit Amount

No. reference to book of specifications) Figures

1 Excavation for foundation upto 1.5 m depth including sorting 12.28 Cum. 261.82

out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(C) Hard Murrum

2 Excavation for foundation for depth from 1.5 m to 3.0 m 14.18 Cum. 292.87

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead. (D) Soft

rock not requiring Blasting

3 Filling available excavated earth (excluding rock in trenches 13.23 Cum. 133.66

plinth, slides of foundations etc. in layers not exceeding 20 cm

in depth consolidating each deposited layer by ramming and

4 Filling in foundation and plinth with murrum or selected soil in 24.88 Cum. 296.30

layers of 20cm thickness including watering ramming and

consolidating etc. complete

5 Providing and laying cement concrete 1:2:4 (1- Cement : 2- 6.95 Cum. 3713.67

Coarse sand : 4- graded stone aggregates 20 mm nominal

size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth (more than 10 ton)

6 Providing and laying controlled cement concrete M.200 and 9.96 Cum. 4248.87

curing complete including the cost of formwork but excluding

reinforcement for reinforced concrete work in (A) Foundations,

footings, Base of columns and Mass concrete.

7 Providing and laying controlled cement concrete M-200 and 2.38 Cum. 8070.48

curing complete including the cost of form work but excluding

cost of reinforcement for reinforced concrete work for

Column upto plinth level.

8 Providing and laying controlled cement concrete M.200 and 9.13 Cum. 5882.11

curing complete including the cost of formwork but excluding

reinforcement for reinforced concrete work in (D) Columns,

Pillars posts and struts, upto floor two level. (more than 10 ton

9 Brick work using common burnt clay building brick having 2.45 Cum. 4121.55

crushing strength not less than 35 kg/sq. cm. in foundation

and plinth in cement mortar 1:6 ( 1 Cement: 6 fine sand) (B)

10 Providing and laying cement concrete 1:2:4 (1- Cement : 2- 8.67 Cum. 4083.72

Coarse sand : 4- graded stone aggregates 20 mm nominal

size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth (more than 10 ton)

11 Providng TMT bars renforcement of FE 500/500D for R.C.C. 5327.23 kg 77.29

work including bending binding and placing in position

complete for all floor.

12 Providing and laying controlled cement concrete M.200 and 4.25 Cum. 8070.48

curing complete including the cost of formwork but excluding

reinforcement for reinforced concrete work in (D) Columns,

Pillars posts and struts, upto floor two level. (more than

13 Providing and laying controlled cement concrete M.200 and 0.81 Cum. 8151.72

curing complete including the cost of formwork but excluding

reinforcement for reinforced concrete work in (D) Columns,

Pillars posts and struts, upto floor two level. (more than

14 Providing and laying controlled cement concrete M.200 and 5.42 Cum. 6355.22

curing complete including the cost of formwork but excluding

reinforcement for reinforced concrete work in (C) Slabs,

landing, shelves, Balconies, Lintels, Beams, Girders and

Cantilever upto floor two level.

15 Providing laying controlled cement concrete M 200 R.C.C 0.20 Cum. 9539.55

lintel including finishing smooth with,curing etc. complete

including the cost of formwork but excluding the cost of

16 Providing and laying controlled cement concrete M.200 and 7.94 Cum. 6758.24

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (C)

Slabs,landing,shelves,Balconies, Lintels, Beams, Girders and

Cantilever upto floor two level. (more than 10 ton)

17 Brick work using common burnt clay building brick having 16.41 Cum. 4403.40

crushing strength not less than 35 kg/sq. cm. in super

structure above plinth level up to floor two level in cement

mortar 1:6 ( 1 Cement: 6 fine sand) (B) Convention for G.F

18 Brick work using common burnt clay building brick having 6.13 Cum. 4685.25

crushing strength not less than 35 kg/sq. cm. in super

structure above plinth level up to floor two level in cement

mortar 1:6 ( 1 Cement: 6 fine sand) (B) Convention for F.F

19 Providing and laying Machine cut, Free edges, Machine 6.90 Sqmt 2451.88

polished Granite stone slab 18 mm thick Single Piece For

doors and Windows Cill and Jambs Cladding as per design

including Full moulded Round front edge and 1 cm nosing

and laid on 20 mm thick cement mortar 1:6 (1 cement :

coarse sand) and jointed with gray cement slurry including

rubbing and polishing etc. complete (As per R.A.)

20 Providing and fixing 35mm thick factory made moulded door 5.04 Sqmt 2152.31

shuter consisting of solid core single/two leaf flush door of

30mm thickness, lipped with 15mm (5mm x 3) thick x 30mm

width on one stiles and top rail and 10mm (5mm x 2) thick x

30mm width on the other stiles and bottom rails. The inner

panel laminated with 2mm thick termite proof, water proof and

fire resistant moulded PVC sheet with 2,4,6 raised panel

design in different plain and /or prelim colours on one side

after routing the moulded design on flush door and 2mm plain

and/or prelim PVC sheet on other side using rubber adhesive

on flush door and solvent cement adhesive on the PVC liping

etc. complete as per direction of Engineer in charge,

manufacture’s specification and drawing

21 Providing and fixing window having extruded aluminum Colour 3.00 Sqmt 1583.96

anodized section frame main outer size 95mm x 24mm x

1.17mm @ wt.of 0.738 Kg/mt , horizontal Three track member

size 92mm x 31.75mm x 1.30mm,@ Wt.1.07 Kg/mt , vertical

member of size 92mm x 31.75mm x 1.50mm @ Wt.

Kg/mt with sliding shutters of horizontal member size

mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical member of

size 40mm x 18mm x 1.29 mm @ wt.of 0.456Kg/mt/ with 5 mm

thick transparent bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details etc

22 Providing & fixing M.S. grill / M.S. door of required pattern to 497.70 kg 159.58

wooden frames of windows/ brick masonry with necessary

M.S. angle, M.S. pipe, M.S. flats and other structural steel at

required spacing and frame alround square or round bars with

round headed bolts and nuts or by screws (Plain Grills)

Including primer coat of approved quality and two coats of oil

paintings etc. complete as directed.

23 Providing 15mm thick cement plaster in single coat on Rough 130.27 Sqmt 176.10

(Similar)side of single or half brick walls for interior plastering

upto floor two level and finished even and smooth in (ii)

Cement mortar 1:4 (1-cement :4-sand)

24 Providing 10mm thick cement plaster in single coat on 63.19 Sqmt 145.12

brick/conceret wall for interior plastering finished even and

smooth (ii) cement mortar 1:3(1 cement:3 sand) and mala

trovel finished etc. complete.GF

25 20 mm thick sand faced cement plaster with on wall upto all 114.34 Sqmt 339.15

height above ground level consisting 12 mm thick backing

coat of c.m. 1:3 (1 cement : 3 sand ) and 8 mm thick finishing

coat of cm 1:1 (1 cement : 1 sand) etc. complete.all height etc.

26 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm 53.16 Sqmt 1053.32

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse

sand) on new surface or fixing on existing flooring by adhesive

material including dismentaling of existing flooring and jointed

with color cement slurry including finised with flush pointing &

cleaning the surface etc. complete for light shade (more than

27 Providing Green Marble for Stair Toppa & Riser storage cabat 6.52 Sqmt 2469.45

partion,self complate with material like cement,marble,camical

etc complate including all Labour work complate as per

drawing and direction by Site Engineer

28 Providing and laying broken chine mosaic flooring for terrace 49.88 Sqmt 765.98

using 12 mm to 20 mm broken pieces of glazed tiles to be laid

over cement mortar 1:3 to plain or slope and to be tempered to

bring mortar creme out upto surface using white cement

including rounding off junctions and extending them upto

cm along the wall,clearing with water and oxalic acid etc. as

29 (A) Providing and laying internal cement based water proofing 49.88 Sqmt 898.50

treatment including preparation of surface as required for

tretment of roofs, balconies, terrace,etc. consisting of following

(a) Applying and grouting a slurry coat of neat cement using

2.75 kg/sqm of cement admixed with proprietary water

proofing compound conforming to IS : 3645 over the R.C.C.

slab including cleaning the surface before tretment.

(b) Laying cement concrete using brocken bricks/brickbats

mm to 100 mm size with 50% of cement mortar 1:5 admixed

with proper water proofing compound confirming to IS :

over 20 mm thick layer of cement mortar of mix 1:5 admixed

with proprietary water proofing compound confirming to IS :

2645 to required slope and treting simillary the adjoining walls

up to 300 mm height including of junction of walls and slabs.

(c) After two days of proper curing applying a second coat of

cement slurry admixed with proprietary water proofing

compound confirming to IS :

(d) Finishing the surface with 20 mm thick joinless cement

mortar of mix 1:4 admixed with proprietary water proofing

compound confirming to IS : 2645. and finally finishing the

surface with neat cement slurry and making of 300 x 300 mm

(e) The whole terrace so finished shall be flooded with water

for a minimum period of two weeks for curring and for final

test. all above operations to be done in order and as directed

and specified by the Eng-in-charge.

30 Finishing wall with water proofing cement paint of on wall 114.34 Sqmt 117.41

surface ( Two coats) to give an approved brand manufacture

and of requred shape even shade after throughtly brushing of

loose powered materials.

31 Wall painting (two coats) with plastic emulsion paint of 193.46 Sqmt 86.60

approved brand and manufacture with on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth along ceilings and sloping