Construction of chowkidar quarter and tapping of spring at Sadnar by way of laying / fitting of D.I. pipes upto 0.50 lac gallons capacity S.R. at Syed Mirza Bagh Colony for WSS Ahil Chatterhama (NABARD)

Amount

Earthwork in excavation by mechanical means (Hyd. Excavator) over areas (exceeding 30cm in depth 1.5 mtr. in width as well as 10 sqm. plan) including disposal of excavated earth lead upto 50 mtr. and lift upto 1.5 mtr. disposed earth to be leveled and neatly dressed:

In all kinds of soils

Ordinary rock

E/W in excavation by manual means in trenches for foundations, drains, pipes, cables etc (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5 mtr including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be leveled and neatly dressed

In all kinds of soils

Ordinary rock

Dumping stones excluding cost of stones in horizontal on level.

P/L in position cement concrete of specified grade excld. the cost of centering and shuttering – All work upto plinth level; 1:4:8 (1 Cement: 4 fine sand: 8 graded stone aggregate 40 mm nominal size) (Crushed)

Providing and laying in position cement concrete of specified grade excld. the cost of centering and shuttering- all work upto plinth level.1:1.5:3 (1 cement : 1.5 coarse sand :3 graded stone Agg. 20 mm nominal size) Crushed

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 150 , landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excld. the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone agg. 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete excld. cost of centring, shuttering, finishing and reinforcement – All work upto plinth level: 1:2:4 (1 cement : 2 coarse sand: 4 graded stone agg. 20 mm nominal size)

Centering and shuttering including strutting, propping etc and removal of form work for:

Foundations, footings, basis of columns etc

Lintels, beams, plinth beams, girders, bressumers & cantilevers

Suspended floors, roofs, landings, balconies and access platform.

Edges of slabs & breaks in floors and walls, under 20cm wide.

Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 75 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

Extra for brick work in superstructure above plinth level upto floor V level by manual means

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone agg.) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete : 25 mm thick with 12.5mm nominal size stone agg. (Crushed)

Reinforcement for RCC work including straightening cutting, bending, placing in position and binding all complete. (T.M.T Bars).

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) :Kiln seasoned and chemically treated hillock wood

Providing and fixing glazed shutters (30 mm thick) for doors, windows and clerestory windows using 10kg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt hinges bright finished of required size with necessary screws. second class Kail wood

Providing and fixing 30 mm thick wire gauze shutters using galvanised MS wire gauze of avg width for aperture 1.4mm in both directions with wire of dia 0.63mm for doors, windows and clerestory windows: ISI marked MS pressed but hinges bright finished butt hinges of reqd size with necessary screws: Kiln seasoned and chemically treated hollock wood

12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand)

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providing and fixing Ceramic glazed floor tiles 300x300mm (thickness to be specified by the manufactures) of 1st quality conforming to IS: 13755 of NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in color such as white, lvory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete.

P/F water closet squatting pan (Indian type W.C. pan) with 100 mm sand cost iron P or S Trap 10 litre low level P.V.C flushing Citern including flush pipe (of approved make) manually controlled device (handle lever) conforming to IS:7231, with all fitting and fixtures complete, including cutting and making good the walls and floors wherever required. Long pan pattern white vitreous china W.C. pan of size 580 mm.

Providing and fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

P/F of salem stainless steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets & stainless steel plug 40 mm including painting the fitting and the brackets, cutting and making good the wall wherever required: 510x1040 mm bowl depth 178 mm

Providing/ fixing of PVC waste pipe for Sink or wash basin including PVC waste fitting complete. 40 mm dia

Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms.

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.: INTERNAL WORK-Exposed on wall 15 mm dia. nominal bore (Light)

Providing and fixing brass bib cock of approved quality : 15 mm nominal bore

Providing and fixing ball valve (brass) of approved quality complete 15 mm nominal bore

Providing / fixing of 50 lit. capacity Geysers of reputed make especially Venus (ISI specified) including all carrages complete job.

Supply and installation of PVC water storage tanks of IS specifications triple layer of 500 liter capacity incld. supply and fixing of jam nuts, union, nipples & bib cocks complete. The job includes all sorts of carriages upto site of work

Providing and fixing lSI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete.

Providing 40x5 mm flat iron hold fast 40 cm long incld. fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cum 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone agg. 20 mm nominal size)

Providing and fixing lSI marked oxidised M.S. handles conforming to IS : 4992 with necessary screws etc. complete:

Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surface) excluding the cost of purlins, rafters and trussers and including cutting to size and shape sherever required. 0.63mm thick with zinc coating not less than 275 gm/m2

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.63mm thick with zinc coating not less than 275gm/ m2

Providing and fixing flashing of40cm overall width in plain G.S. sheets fixed with polymer coated J or L hooks, bolts and nuts G. I. limpet and bitumen washers complete, bent to shape and fixed in wall with cement mortar 1:3 (1 cement : 3 coarse sand) 1.00mm thick with zinc coating not less than 275gm/m2

Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200GVirgin Polythene Bags fixed to wall with screw, rawel plug & washers and held in position by criss crossing Gl wire etc. complete as per directions of Engineer-in-Charge. 250x32 mm (nominal size)

Providing wood work incld cutting, hoisting and fixing in position for trussed and framed work using safaida wood.

Providing heating point in room one, heating point incld wiring for heating ponts in 2.5 sqm, PVC insulated multi stranded copper wire 84 sqm, PVC insulated multistranded copper wire for heating sub main, 16 Amp switch socket combined 2 mm thick PVC conduit / channel with Bends, junction boxes etc, 10 Amp S-Pole MCB, 2 way DB for housing MCB and hylem sheets with wooden box in walls

Heating points.

Lighting points

Random Rubble masonry with hard stone from nallah in foundation and plinth including levelling up with cement concrete 1 :6:12 ( 1 Cement: 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with cement mortar 1:6 (1 Cement: 6 coarse sand)

Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipe)

Providing push-on-joints to Centrifugally (Spun) Cast iron pipes or Ductile iron Pipes including testing of joints and including the cost of rubber gasket

100 mm dia pipes

125 mm dia pipes

Laying and fitting of GI pipes complete excld. cost of pipes and earthwork:

50 mm dia G.I. pipes

40 mm dia G.I. pipes

25 mm dia G.I. pipes

20 mm dia G.I. pipes

Filling available excavated earth excluding rock in trenches, plinth, sides of foundation etc in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering lead up to 50m and lift up to 1.5m.

Dismentalling / reconstruction of existing garden walls, complete

Carriage of materials from divisional store/ source upto dumping site of work, incld. loading, unloading and stacking etc. complete by Mechanical Transport

Cement / pipe for an avg. lead of 20 Kms

Cement / Steel for an avg. lead of 15 Kms

Sand / Agg. (20mm) for an avg. lead of 20 Kms

Sand / Agg. (20mm) for an avg. lead of 15 Kms

Aggreagate (40mm) for an avg. lead of 15 Kms

Stone for an avg. lead of 15 Kms

Bricks for an avg. lead of 35 Kms

125 mm dia pipe for avg. lead of 20 Kms

100 mm dia pipe for avg. lead of 20 Kms

Carriage of materials from dumping upto actual site of work, incld. loading, unloading and stacking etc. complete by manual labours.

Cement for an avg. lead of 1000 mtr.

Sand / Agg. (20 mm) for an avg. lead of 1000mtr.

125 mm dia pipe for avg. lead of 1000 mtrs.

100 mm dia pipe for avg. lead of 1000 mtrs.

Cement for an avg. lead of 100 mtr.

Steel for an avg. lead of 100 mtr.

Sand / Agg. (20mm) for an avg. lead of 100 Mtrs.

Aggreagate (40mm) for an avg. lead of 100 mtrs.

Bricks for an avg. lead of 100 mtrs.

Stone for an avg. lead of 100 mtrs.