GENERAL

Augoring and boring of holes in site for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils without under reams as per IS 2911-1980 as per approved designs including all operations, incidental, labour charges, hire charges of Machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diameters - 1 Rmt. up to 300 mm dia

Under-reaming for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils with Augoring and boring equipment in site as per IS 2911 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diametres.(350 mm dia 450 mm dia)

Supply and placing of the Design Mix Concrete for M-20 Grade corresponding to IS 456 using CONCRETE MIXER with 20mm H.B.G Metal including cost and conveyance of all Material like cement, Sand, water etc., to site, operational, incidental and Labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete (APSS No.402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc., complete (BLD-CSTN-2-14)

Earthwork excavation in Ordinary soil by Manual Means upto 3 m depth for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH (RBR-FNDN-1(A)) - 1 Cum

Manufacture, Supply and Delivery of R.C.C. Collars conforming to B.I.S. 458/2003 (rate per each collar) suitable for R.C.C. Plain ended pipes including transportation but excluding all taxes. MAT-05683

Filling with dust for trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH (revised RBR-FNDN-2.i)

Providing concrete for plain/reinforced concrete (M10) in open foundations using 20 mm Graded hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.

Construction of granular sub-base (GSB) by providing Well graded material for Grading III mixing in a Mechanical Mix Plant at OMC carriage mixed material to work site spreading in uniform layers with motor grader on prepared surface and compacting with 80-100 kN Vibratory Roller to achieve the desired density, complete as per Technical Specification of MORTH.

Providing, laying, spreading and compacting graded HBG Crushed stone aggregate to Wet mix macadam specification including cost, seigniorage of all material and including premixing the material with water at OMC in mechanical mixer Plant carriage of mixed material by tipper to site, laying in uniform layers with paver in base course on well prepared surface and compacting with Vibratory roller of 8 to 10 to achieve the desired density etc., as directed by the Engineer-in-Charge and as per MORTH & H Specification for finished item of work. (RBR-SBBS-11)

Supply of precast concrete blocks for paving of M-40 grade and thickness not less than 80 mm for Medium traffic areas conforming to IS 15658:2006 in all shapes and designs as per the manufacturer’s specification

Labour charges for laying & fixing of precast concrete blocks for paving of all grades, any thickness, all sizes & shapes including all labour charges for loading & unloading, laying to desired lines and levels complete excluding cost of cement, sand, water, electricity etc (LAB-01180, BMT-D.17)

Supply and placing of the Design Mix Concrete for M-20 Grade corresponding to IS 456 using CONCRETE MIXER with 20mm H.B.G Metal including cost and conveyance of all Material like cement, Sand, water etc., to site, operational, incidental and Labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete (APSS No.402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc., complete (BLD-CSTN-2-14)

File Cps Footings

Chajjas-Sunshades

Providing High Yield Strength Deformed (HYSD) Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. ( APSS No.126)

Providing impervious coat to exposed R.C.C Roof Slab surface with C.M (1:3), 20mm thick with 1 kg of water proof compound per bag of cement laid over roof when it is green including cost of all Material, excluding conveyance charges of Material and including all operational, incidental and Labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work - 10 Sq.M.

Brick Masonary in C.M (1:6) using 2nd Class well burnt ground moulded traditional size bricks of locally available having a crushing strength of not less than 35 Kg./Sq.Cm & size of 23x11x7 Cm including cost & conveyance of Material to site, mixing of Cement Mortar & laying of bricks & mortar to specified thickness, watering, curing, including all scaffolding, hire & operational charges of Machinery, all Labour charges & all water lead charges etc. complete for finished item of work. (BLD-CSTN-3-1)

Plastering in C.M (1:4) 12 mm thick including cost and conveyance of all Material, Labour for mixing Material, laying and curing etc., complete - 10 Sq.M. (BLD-CSTN-6.2)

Ceiling Plaster: Ornamental Plastering 12mm thick in two coats, first with 8mm thick in C.M (1:6) prop and second with 4mm thick in C.M (1:3) prop including cost and conveyance of all Material to site, Screening and mixing, laying finishing with sponge finish and watering, curing including all Labour charges ,hire and operational charges etc., complete for finished item of work - 10 Sq.M.

RCM facia 5cm thick in C.M (1:3) for drop walls, fins with rabbit wire mesh & nominal reinforcement as directed by Engineer-in-charge with dubara sponge finishing, including cost & conveyance of all Material to site, operational & incidental, cost and conveyance of cement, wire mesh, water to work site, centering, scaffolding and form work, lift charges etc., complete for finished items of work (APSS No.403 & 903) (BLD-CSTN-6-11) - 10 Sq.M.

Flooring with vitrified tiles of 1st quality, set over base coat of C.M (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kg/sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete for finished item of work (BLD-CSTN-7-5) - 10 Sq.M.

Dadooing to walls with Glazed red or white full body ceramic wall tiles of size 200 x 300mm and thickness 6mm 1st quality set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete.

(I) Providing and applying wall putty of white cement or polymer or cement based of average 1 to 2mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, sand the surface, clean and wipe off loose dust, applying knifing paste filler by putty knife/muslin pad, air dry for 2-3 hours, sand with 180 and 320 No. emery paper for the surface preparation, ii) Primary coat with appropriate water based cement primar of Interior gragde -1 of approved brand and iii) Painting to New Walls with two coats of plastic emulsion paint of synthetic polymer luxury plastic emulsion paint of superior grade having VOC (Volatile Organic Compound) content less than 50 grams per litre of approved brand and shade over a base coat making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental charges, labour charges etc., complete for finished item of work as directed by the department for INTERNAL WALLS and Ceiling

Painting to the walls with 2 coats of Plastic emulsion paint of exterior Grade having VOC (Volatile Organic Compound) antain less than 50 Grams per liter of approved brand and shads including one coat of cement primer after throughly brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyaance of all materials to work site and all operational incidental, labour charges etc., complete for finished item of work as per SS 911 for Internal Walls and Celling. (Thrree Coats)

Painting to the walls with 2 coats of Acrylicemulsion paint of exterior Grade having VOC (Volatile Organic Compound) antain less than 50 Grams per liter of approved brand and shads including one coat of cement primer after throughly brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyaance of all materials to work site and all operational incidental, labour charges etc., complete for finished item of work as per SS 911 for External Walls. (Three Coats)

Providing and fixing 30mm thick BRAND FACTORY MADE BOTHSIDE PRELAM SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of MS. Tubes of 19gauge thickness and size of 19mmX19mm for stiles, top and bottom rails. MS. Frame shall have a coat of steel primers of approved make and manufacture. MS. Frame covered with 5mm thick heat moulded Prelam Pac ‘C’ channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 450 angle on either side forming stiles; and 5mm thick, 95mm wide Prelam Pac sheet out of which 75mm shall be flat and 20mm shall be tapered in 450 on the inner side to form top and bottom rail 115mm wide Prelam Pac sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rail shall be provided either side of the panel. 10mm (5mmX2) thick, 20mmwide cross Pac sheet shall be provided as gap insert for top and bottom rail. Panelling of 5mm thick both side Prelam Pac sheet to be fitted in the MS. Frame welded/ sealed to the stiles & rails with 7mm(5mm+2mm) thick X 15mm wide Pac sheet beading on inner side, and joined together with solvent cement adhesive etc. an additional 5mm thick Pac strip of 20mm width is to be stuck on the interior side of the ‘C’ channel using Pac solvent cement adhesive etc. complete as per direction of Engineer – in-charge, manufacture specification and drawing. MAT-01332 BMT-N.03.

Providing and fixing factory made uPVC white colour casement/casementcum fixed glazed windows comprising of uPVC multi-chambered frame,sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), uPVC extruded glazing beads of appropriate dimension, EPDMgasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size forfixing frame to finished wall, plastic packers, plastic caps and necessarystainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusionwelded including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approveddrawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealant . Note: For uPVC frame, sash and mullion extruded profiles minus 5%tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made. Casement window double panels with top fixed with S.S. frictionhinges (350 x 19 x 1.9 mm) made of (small series) frame47 x 50mm, sash 47 x 68 mm & mullion 47 x 68 mm allhaving wall thickness of 1.9 ± 0.2 mm and single glazing beadofappropriate dimension. ( Area of window upto 2.50 sqm). MAT-05444, BMT-P.78.A

Providing and fixing factory made uPVC white colour casement/casementcum fixed glazed windows comprising of uPVC multi-chambered frame,sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), uPVC extruded glazing beads of appropriate dimension, EPDMgasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size forfixing frame to finished wall, plastic packers, plastic caps and necessarystainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusionwelded including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approveddrawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealant . Note: For uPVC frame, sash and mullion extruded profiles minus 5%tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made. Casement window double panels with top fixed with S.S. frictionhinges (350 x 19 x 1.9 mm) made of (small series) frame47 x 50mm, sash 47 x 68 mm & mullion 47 x 68 mm allhaving wall thickness of 1.9 ± 0.2 mm and single glazing beadofappropriate dimension. ( Area of window upto 2.50 sqm). MAT-05444, BMT-P.78.A

Supply and fixing of Mild Steel and its fabricatin charges etc., complete for grills - 1 Kg.

Supplying and fixing of Teak Wood Door Frame of section 100 mm x 75 mm (2 Vertical & 2 Horizontal) to accommodate 30mm thick Door Shutter. The Frame of section suitable to Single Leaf Flush Door Shutter Solid bond Wood black Board type with Commercial ply on both faces of 35mm thick conforming to IS.2202 including painting to frame with primary coat and including cost of fixtures such as (i) 2 Nos.-250mm long M.S.powder coated Aldrops, (ii) 1 No.-250mm long 10mm M.S.Powder Coated Tower Bolt, (iii) 2 Nos.-150mm long M.S.poder coated Door Handles and (iv) 1 No. M.S.Powder Coated Door Stopper (v) 3 Nos. of butt hinges (vi) Anchor Fastings and supplying and fixing of Single Leaf Flush Door Shutter Solid bond Wood black Board type with teak ply on both faces of 35mm thick conforming to IS.2202 including cost of fixtures such as (i) 2 Nos.-250mm long M.S.powder coated Aldrops, (ii) 1 No.-250mm long 10mm Dia. M.S.Powder Coated Tower Bolt, (iii) 2 Nos.-125mm long M.S.powder coated Door Handles and (iv) 1 No. Aluminium Door Stopper and including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the department. (with sill)

Painting with Synthetic Enamel paint TWO Coats of approved quality colour & graded-I over a primary coat of read oxide paint of grade-II to new steel works after the surface are thoroughly cleaned & scrapped including primary coat item of work, cost & conveyance of all Material, Labour charges etc. as per S.S & as directed by the departmental authorities for finished item of work - 1 Sq.M.(Total Three Coats)

Painting with Synthetic Enamel paint TWO Coats of approved quality colour & graded-I over a primary coat of read oxide paint of grade-II to new steel works after the surface are thoroughly cleaned & scrapped including primary coat item of work, cost & conveyance of all Material, Labour charges etc. as per S.S & as directed by the departmental authorities for finished item of work - 1 Sq.M.(Total Three Coats)

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes 6 Kgs/cm2 for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding Excise duty and Sales Tax etc.

suply and delivery SWR(PVC) 160mm Plain Bend (87.5"), Drainage, Elbow

Supreme 160mm dia PVC SWR Door Bend is a specialized plumbing fitting designed for soil, waste, and rainwater (SWR) drainage systems

suply and delivery 160mm PVC TEE

Supplying & fixing oval shape basin white (520x410mm)parry or equivalent (BMW-I.129)

Supply and Fixing of steel body tap 12.7 mm (1/2") Indian Make heavy duty including all type of necessary charges etc., complete as per SS (BMW-E.09)

Supplying & Fixing low down porcelain flushing tank 10 Lit Capacitywith internal components BMW-D.11

Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 ofwhite glazedwith 'P' trap (BMW-D.13)

Supplying & Fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with internal flushing rim fixed with screws complete Indian make conforming to IS:2556-1995 (BMW-D.33)

Supplying & Fixing of concealed stop cock 12.7mm (1/2") Indian make heavy duty (BMW-E.03)

Supply and fixing of 20W, 2400 lumens, T8 not less than 1100 mm length LED retrofit tube light with aluminum anodized body, input voltage AC 220 - 260 Volts, having luminous efficacy >120 lumens/ watt, with PF>0.9, surge protection: 2KV, THD<10%, with inbuilt driver and frosted cover CCT: 3000K-5700K, minimum CRI>70, etc., as per IS 10322 (Part 5/ Sec 1), 2012, complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category I. ELEC-3.8.16

Supply of 48" (1200mm) Sweep decorative Ceiling Fan, with double ball bearings with all accessories without Regulator. Makes: As per list of recommended brands. ELEC-5.1.4

Step type Electronic Regulator, Socket size of wattage 100/120W. MAT-02817

Supplying and fixing of 25mm Outer Dia. heavy duty (2.00 to 2.20 mm thickness) grade with IS.9537, Part-3 regid PVC Pipe of VIP/Besto plast/Goldmedal/Million plast/GM/Sudhakar/Polyline of ISI mark for CONCEALED IN ROOF SLAB with all required accessories including chisiling the wall where ever necessary including masonry work for Light/Fan Points and seperate plug point with MS deep junction boxes including all labour chartges etc. complete.

Supplying and fixing of 25mm Outer Dia. heavy duty (1.60 to 1.80 mm thickness) grade with IS.9537, Part-3 regid PVC Pipe of VIP/Besto plast/Goldmedal/Million plast/GM/Sudhakar/Polyline of ISI mark for CONCEALED IN WALLS with all required accessories including chisiling the wall where ever necessary including masonry work for Light/Fan Points and seperate plug point with junction boxes and bends of makes Gold medal/Million plast/GM/Sudhakar/Polyline /Bestoplast.Including all labour chartges etc. complete.

Wiring with 2 runs of 14/0.3mm (1.00 Sq.mm) PVC insulated F.R flexible copper cable (ISI Mark) make of Havells/KEI/Polycab/Bonton/Gold Medal/V-Guard/GM Million/HPL/Finecab/Orbit in the existing pipe with 6-A/10-A 1 way 1 module switch make of Legrand Arteor/Schneider Zencelo/ Honeywell/Blenge plus, Ceiling rose of make Anchore/Gold Medal Oliv`e/Million Zoom and 8 modular horizontal/vertical cover frame make of Legrand Myrius/Cabtree Thames platinum/GM Four Five/Mullion Logus/Gold Medal Curve/CPL/Panasonic vision/Salzer S.90,Series covering to module box including all labour charges etc., complete for LIGHT POINTS, FAN POINTS & BELL POINTS in Residental Building.

Supply and fixing of Batten Holder/Slanting Holder of Anchor/Gold medal olive/Millon Zoom in lieu of ceiling rose of light point complete with all connections and all labour charges etc., complete (for New installation) without bulbs for finished item of work..

Supply and fixing of 6-A/10-A 3/2 Pin 2 Module Modular Socket with shutter of make Legrand Arteor/Schneider Zen celo/Honeywell Blenge plus with 6-A/10-A, 1 Way 1 Module Modular switch of make Legrand Arteor/Schneider Zencelo/ Honeywell/Blenge plus 6-A Switch Control on a common switch board of with earth continuity including wire leads, earth connections along with all labour charges etc., complete.

Supply and fixing of 4 Way SPN Distribution Board with IP-43 Protection (Metal Door) as per 13032 and suitable for Single Phase ECCB/RCCB/DP Isolator as Incomer Incommer of make of Gold Medal/GM/ Milltec/Sputnik/Benlo/Vimal/Fybros by Kundan cab and 6-32A 10KA SP MCB C/D curve as OUTGOING make of Gold medal/Milltec/Sputnik/Benlo/GM/Vimal including internal connections and all labour charges for surface/flush mounting etc., complete for finished item of work as directed by the department. (40A DP Isolator/RCCB/ELCB=1 No. for Incomer {and} 10KA-6-32A SP MCBs = 4 Nos for Outgoing).

Supply and Fixing Of Fan Hooks including all labour Charges etc.,

Supply, Transportation and installation of Desktop with fully loaded software as desired, with the following configuration. 1. Processor: Intel® Core™ i7-12th Generation or Higher version Processor with Intel® HD Graphics 770 (2.9 GHz base frequency, up to 4.9 GHz with Intel® Turbo Boost Technology, 25 MB L3 cache, 12 cores 20 threads) Intel Q670 Chipset 2. Memory: 8 GB DDR4-3200 MHz SDRAM (1 x 8 GB) memory slots 2 DIMM 3. Hard drive 512GB SSD (Hard Drive 2 nd 1 TB 7200 SATA HDD ) 4. 1 audio line in; 1 audio line out; 1 HDMI; 1 RJ-45; 1 VGA; 4 USB 3.0; 4 USB 2.0 5. Operating Systems: Windows 11 Pro professional 64 bit with product key License. 6. communications (intel Wi-Fi & Blue tooth) 7. Preloaded with latest version of Antivirus Symantec/ McAfee / NOD32 / e-Trust / Avast Internet Security / Kaspersky / Quick heal / eScan / Msecure with following features: Antivirus, Antispyware, intrusion Prevention Browser protection with single management console with 3 year subscription with support updates and patches. 8. Accessories: With required connecting cables and driver media should be supplied. 9. Warranty: 3 Year Standard On-Site Comprehensive Hardware Warranty (including O.S support, Spares- Parts/Service/Labour/On-site) Makes: As per list of recommended brands. ELEC-7.3.1 HP ProDesk or its equivalent in Dell.

Supply, Transportation and installation of All-in-One (Print, Copy, Scan) with duplex, auto document feeder features: -Print Resolution 600 x 600dpi -Print Speed (A4) 27ppm -Auto Duplex Printing Standard -Available Paper Size for Auto Duplex Print A4, Letter, Legal (*1), Indian Legal, Fulllscape -COPY Copy Speed (A4) 27ppm Maximum Number of Copies Up to 999 copies Scan Type Colour Contact Image Sensor Scan Resolution Optical Up to 600 x 600dpi Pull Scan Yes, USB and Network Makes: As per list of recommended brands. ELEC-7.3.4 Canon imageCLASS MF244dw /HP or its equivalent.

Supply and installation of 2000 VA, 36 V DC Inverter(home UPS system) pure sine wave out put, single phase input / Single phase output.Makes : As per list of recommended brands. (ELEC-11.1.1)Makes: Exide / Amar Raja / Samhitha/ Microtek

Supply and Delivery of Iron Safe Locker (Iron Beeruva) Local Made size upto size 6.5' x 2.5' x 1.6' (22 gage) As per Locoal Quotation

Supply of S type wired chair as per specification including cost and conveyance of materials…complete etc.( As per Local Quotation)

Supply of Office Table Table as per specification including cost and conveyance of materials…complete etc.( As per Local Quotation)

Supply of Desktop ComputerTable as per specification including cost and conveyance of materials…complete etc.( As per Local Quotation)

Provision for Seignorage Charges

Towards Merit 2% on Seignorage Charges

Towards Consideration amount 100% Seignorage Charges

Towards DMF 30% on Seignorage Charges

Provision for NAC @ 0.10%

Provision for GST @ 18%

Provision for TPQA @ 0.739 %

Unforeseen item