Construction of 2x5MVA 33/11KV Substation at Shri Kedarnath Dham Ji on turnkey basis and AMC of Project for 5 years

Amount

33 KV MATERIAL 33/11 kV, 5 MVA power transformer with an on-load tap changer (OLTC) designed for special purpose applications. The transformer shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C with 5 year warranty. The transformer shall be manufactured/ assembled at site, with considerations for high-altitude effects on dielectric strength and thermal performance. It shall include features to ensure efficient operation under low-temperature,high/low humid conditions, appropriate insulation, cooling & heating arrangement systems, and provisions for Air lifting. with all required transformer earthing. i) 5 MVA, 33/11 kV power transformer all raw material including all fittings & accessories

33/0.433 KV 100 KVA Station Transformer Level-2 copper wound. The transformer shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C with 5 year warranty.It has to ensure efficient operation under low-temperature,high/low humid conditions, appropriate insulation, cooling & heating arrangement systems, and provisions for Air lifting.

Steel tubular Pole 11 mtr. Long (STP-410 )SP-55 ( complete galavanized)

MS Channel 125x65x6mm, 2.800mtr. long (Top Channel) with all fixing arrangment Nuts & Bolts all galvanized

PP & clamps for suitable size for Top portion of STP-410, SP-55 Pole

MS Channel 125x65x6mm, 2.800 mtr. Long (for Transformer Base) with all fixing arrangment Nuts & Bolts all galvanized

PP of suitable size for Bottom portion of STP-410, SP-55 Pole

33 KV Line isolater Vertical Type with all accessories( complete galavanized)

33 KV Fuse set

PP of suitable size for Middle portion of STP-410, SP-55 Pole

33 KV lightening arrestor

33 KV 3x50 sq. mm.,Al conducterTr-XLPE insulated,Cu screened, armoured,PVC sheathed Power cable . The equipment shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C. (As per TS of UPCL).

33 kV Danger board with clamp Bolts & Nuts (all galavanized)

GI pipe 4" dia. 3mtr long ( for double pole & bus bar gantry) (all galavanized)

Touch proof Cable jointing kit outdoor type suitable for 3Cx50 mm TR-XLPE cable 33 KV.

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole)

Clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized for Anti climbing device (on SP-55 Pole)

Rod type earthing complete for pole,LT Panel & metering Cubical with GI wire 6 SWG

Compound filled earthing/Chemical Earthing(with G.I. Strip 35x6mm for Neutral Earthing of Transformer .

Compound filled earthing/Chemical Earthing of Transformer Body(with G.I. Strip 35x6mm),Other structure& Equipment( with GI Wire of 8 SWG) .

Compound filled earthing/Chemical Earthingof Lightning Arrestor with G.I. Strip 35x6mm .

Alluminium paint (Double Coat)

Red Oxide paints

33 KV Lightening Arrester

36 kV, 1250A, 26.3 kA for 3 sec., 3 Pole, 50 Hz., (Single Break per Pole), Gang operated, Permanent Magnetic Actuator Operated, Outdoor, Solid Dielectric Insulated, Compact, Vacuum Circuit Breakers, including in-built epoxy resin-cast Dry Type Current Transformers (600-300/1-1A, Core 1: Class 0.5/5VA & Core 2: Class 5P10/7.5VA),Scada operated. The equipment shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C with 5 year warranty.. (As per TS of UPCL).Eraction charges includes complete earthing of Structure. (i) Incomer

(ii) Outgoing (2O/G+1 spare)

(ii) Bus coupler

Control & Relay Panel with SCADA operated and relay as per IEC-61850 with PRP with ed.2 for 33 KV .with 5 year warranty.Eraction charges includes complete earthing of pannel. (i) Incomer Fedder

(ii) Outgoing for Transformers.(2O/G+1 spare)

(ii) Bus coupler

36kV, 800A, 26.3kA/3 sec., outdoor type, 3-Ph gang operated complete with operating mechanism & supporting structure (Single Break per Pole), Maually and motarised Operated, Hook-stick Operated, Off-load Isolator with Earth Switch and suitable for Double Pole Structure Mounting/structure. The equipment shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C with 5 year warranty. . (As per TS of UPCL).Eraction charges includes complete earthing of pannel. (i) Incomer

(ii) Outgoing

(ii) Bus coupler

33 KV Al Conductor ,TR-XLPE insulated,Cu tape screened,armoured,PVc sheathed 1Cx630 sq. mm power cable . The equipment shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C. (As per TS of UPCL).

33 KV Touch proof jointing kit outdoor type suitable for 1Cx630 mm TR-XLPE cable

33 KV Touch proof jointing kit indoor type suitable for 1Cx630 mm TR-XLPE cable

33/110-v KV PT 1 phase oil cooled. The equipment shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C. (As per TS of UPCL).Eraction charges includes complete earthing of pannel. Eraction charges includes complete earthing of pannel.

Electro Atomospheric Compensator: A intellgent passive sensor providing protection against lightening and real time monitoring of weather via Software covering the entire substation area.

11KV MATERIAL 12 kV, 26.3 kA for 3 sec., 3 Pole, 50 Hz., (Single Break per Pole), Gang operated, Permanent Magnetic Actuator Operated, Outdoor, Solid Dielectric Insulated, Compact, Vacuum Circuit Breakers, including in-built epoxy resin-cast dry type current transformer Scada operated. The equipment shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C with 5 year warranty. (As per TS of UPCL).Eraction charges includes complete earthing of pannel. (i) 12kV, 1250A, 26.3kA/3 sec. For Incomer

(ii) 12kV, 1250A, 26.3kA/3 sec. For outgoing Feeders

(iii) 12kV, 1250A, 26.3kA/3 sec. For Bus Coupler

Control & Relay Panel with SCADA operated and relay as per IEC-61850 with PRP ed. 2 for 11 KV.with 5 year warranty. Eraction charges includes complete earthing of pannel. (i) For Incomer (900/1-1-1A, Core 1: Class 0.5/5VA & Core 2: Class 5P10/7.5VA).

(ii) For Feeders (400-200/1-1A, Core 1: Class 0.5/5VA & Core 2: Class 5P10/7.5VA).

(iii) For Bus Coupler (400-200/1-1A, Core 1: Class 0.5/5VA & Core 2: Class 5P10/7.5VA).

12kV, 800A, 26.3kA/3 sec., outdoor type, 3-Ph gang operated, complete with operating mechanism & supporting structure (Single Break per Pole), Maually Operated, Hook-stick Operated, Off-load Isolator with Earth Switch and suitable for Double Pole Structure Mounting ,Scada operated. The equipment shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C with 5 year warranty.. (As per TS of UPCL). Eraction charges includes complete earthing of pannel. (i) Isolator for Incomer

(ii) Isolator for Feeders

11KV, 1Cx630 Sq. mm. TR-XLPE Cable with cleat from Transformer to incomer VCB, VCB to 11 kv Bay & its laying in trench.The equipment shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C with 5 year warranty.. (As per TS of UPCL).

11 KV Touch proof jointing kit outdoor type suitable for 1Cx630 mm .

11 KV Touch proof jointing kit indoor type suitable for 1Cx630 mm .

11 KV ,3x300 sq. mm. TR-XLPE cable with cleat from outgoing VCB to out going feeder poles .

11 KV ,3x300 sq. mm. TR-XLPE cable with cleat for 11 KV underground Line .

11 KV Touch Proof Cable jointing kit for 3x300 sq. mm (Outdoor)

11 KV Touch Proof Cable jointing kit for 3x300 sq. mm (indoor)

11 KV XLPE HS J/K 3X300 SQ.mm Touch Proof STRAIGHT THROUGH

Concrete route marker for HT cable having emboss "DANGER UPCL 11 KV CABLE BELOW" and directional arrows

B-Class GI pipe 150 mm as per IS 1239, at culverts , crossings, by side of bridges with support hangers, fastners , complete in all respects.(galavananized)

Supply and Laying of HDPE pipe (PN-6, PE-80 of outer dia size 160 mm.) with coupler, , short and long bends in open cut trenches IS :7634 Part -2 for installation of power cables as per the code of practice for installation and maintenance of power cables as per IS 1255 :1983 or latest amendments.

HT cable Warning Tape

11/.433 kV, 2 MVA distribution transformer designed for special purpose applications. The transformer shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C with 5 year warranty. The transformer shall be assembled at site, with considerations for high-altitude effects on dielectric strength and thermal performance. It shall include features to ensure efficient operation under low-temperature,high/low humid conditions, appropriate insulation, cooling & heating arrangement systems, and provisions for Air lifting.with all required transformer earthing. i) 2 MVA, 11/.433 kV DTR all raw material including all fittings & accessories

12 kV SCADA compatible HT switchgear, 01 No FPI , LV switchgear consisting of 3200A, 4P microprocessor based ACB and 04 Nos 800 A microprocessor controlled MCCB (d) outdoor enclosure to protect equipments from heavy snow fall and rain.All accesories / protections as per specification. with 5 year warranty.

11 KV PT 1 phase . The equipment shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C with 5 year warranty.. (As per TS of UPCL).

IP CCTV camara 10 nos. (AI Based)

Duct sealing material / sealing length upto 15 cm with expanding polyurethane filler or other sealant material suitable for PVC / HDPE sheathed cables to seal all duct openings.

LT MATERIALS LT Power Cable 3.5Cx70 sq. mm. from station T/F to AC/DB along with suitable lugs and its laying double circuit.The equipment shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C. (As per TS of UPCL).

i) 2x2.5 Sq.mm LT Control Cable

ii) 4x2.5 Sq.mm LT Control Cable

iii) 10x2.5 Sq.mm LT Control Cable

LT PVC Cable 2Cx6 sq. mm

LT PVC Cable 4Cx10 sq. mm

DC INSTRUMENTS 24V, DC 300 AH Battery, Tubular ,C10

Float cum boost battery charger cum inverter 24V with trickle charging arrangement with all meters of AC/DC voltage & ammeter etc. of prescribed specifications.

D.C. Distribution Board of prescribed specification.

AC INSTURMENTS AC Power distribution board of prescribed specification & lighting system consisting of AC Power Distribution Board

1400 mm sweep ceiling fan with electronic regulator.

Pedestal fans

Exhaust fan with controls

40W industrial type T/L Lightning fixture.

150W, LED lamp with Control Gear (for peripheral lighting including mounting accessories)

250W, LED lamp with Control Gear (for switchyard lighting including mounting accessories)

Steel Tubular Poles 8 m long (STP 8 M, 410 MPa , SP-10) as per IS 2713 (Parts 1 to 3): 1980 (All galvanized)

EARTH MAT/CIVIL WORK Earth Mat MS round 32 mm dia 6.21 Kg/mtr for laying earth mat/ 32 No electrodes

Gravel Pitching of size 1/2" to 3/4"

a) 75mmx8mm G.I. Strip for earthing

b) 50mm x 5 mm G.I. Strip for earthing

Rod type earthing of pole by MS earthing rod 20ɸx2500mm & GI wire 8 SWG with Bolts Clamp, & Nuts All Galvanised.(For Fencing, ACDB & DCDB) Annexure C37

MISCELANEOUS GI (RS Joist, Channel, angle, Rail as per RESPO drawings enclosed) for Misc. structures for 33 KV & 11 KV Terminal Gantry Bay, bus bar gantry,with copper conductor for bus, LA, PT, PI, Isolators etc. as per drawings & design and site conditions including fabrication, welding, nut & bolt All Galvanised.The equipment shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C & can withstand harsh weather condition inclusi(As per TS of UPCL). with earthing of all structure.

ACSR Panther conductor

Fire fighting accessories including i) 4 sand bucket with angle iron chuggi type stand.

ii) Carbon dioxide (CO2) type fire extinguishers conforming to IS 2878 - 1976 and cylinders fully charged of 4.5 Kg capacity.

iii) Foam type fire extinguishers, Portable type 5 lit capacity hanged on wall with bracket complete as required

33KV LINE MISCELLANEOUS MATERIALS Wedge connector for Panther to Panther

Wedge connector for Panther to Dog

Connectors suitable for Panther. i) For LA suitable for Panther

ii) For Isolators suitable for Panther

iii) For CT/PTs suitable for Panther

iv) For SF-6 CB suitable for Panther

v) For Transformers suitable for Panther.

vi) Connector Panther For P.I.

vii) For Fuse suitable for panther

vii)Reinforcement steel M.S. Bar 12mm

Perforated tray 400mm width for cable trench

Perforated tray 200 mm width for cable trench

Perforated tray 100 mm width for cable trench

11KV LINE MISCELLANIOUS MATERIALS 11 kV Outgoing Double Pole structure of SP-23 complete with Top channel for holding cable & necessary clamps etc. S.T. Pole 8.5 mtr. Long SP-23 ( complete galavanized)

11 kV top channel 100x50x6mm 2.24 mtr. Long with nuts & bolt all galvanized ( for Double pole)

PP of suitable size for Top portion of STP-410, SP-23 Pole ( complete galavanized)

11 KV lightening arrestor

11 KV TPMO complete 400 Amp ( complete galavanized)

11 kV, 3-ph, Drop Out fuse units (set of 3 units) along with Support Insulators,fuse barrel etc.

11 kV channel 100x50x6mm 2.24 mtr. Long with nuts & bolt all galvanized (for SP-23 pole)for AB Switch and DO Fuse

PP of suitable size for Middle portion of STP-410, SP-23 Pole

11 kV Base channel 100x50x6mm 2.24 mtr. Long with clamps,nuts & bolt all galvanized for Cable GI Pipe Support

PP of suitable size for Bottom portion of STP-410, SP-23 Pole

GI pipe 4" dia. 3mtr long ( for double pole & bus bar gantry)

11 kV Polymer Pin Insulator complete

11 kV Compsite Polymer Disc Insulator B & S type

Disc fitting for Dog 70 KN B&S type

11 kV Danger Board with Clamp with N&B

Wedge connector for DOG

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole)

Clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized for Anti climbing device.(on SP-23 Pole)

Rod type earthing of pole by MS earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete .

Alluminium paint (Double Coat)

Red Oxide paints

11 kv line material including CC work,with all accessories erection, complete in all respect S.T. Pole 8.5 mtr. Long SP-23 for single pole structure ( complete galavanized)

S.T. Pole 8.5 mtr. Long SP-23 Double pole structure ( complete galavanized)

S.T. Pole 8.5 mtr. Long SP-23 for four pole structure ( complete galavanized)

Cross Bracing set 65x65x6 mm MS angle

x arm 11 kv ( complete galavanized)

F bracket for 11kV

11 KV Polymer disc insulator B & S

11 KV disc fitting for weasel

11 KV Polymer Pin Insulator with Pin (N&B)

Earth wire clamps With N&B

PG Clamps for Dog

11 KV TPMO complete ( complete galavanized)

G.S. Stay set GI 1800x16 mm comp.

Stay wire 7/10

MS Earthing rod 20x2500mm

GI Wire 6 SWG

11 KV lightening arrestor

11 KV fuse set omplete.

M.S. Bolt & Nut Off size ( complete galavanized)

P.P. & Clamps for S.T. Pole-sp-23 ( complete galavanized)

Bracing Clamp for ST Pole -sp-23 ( complete galavanized)

Stay clamp for ST Pole -sp-23 ( complete galavanized)

Clamp of required size for holding hdpe pipe for cable supporting angle, ( complete galavanized)

11 KV Danger board with clamp ( complete galavanized)

Number plate for sp-23 ( complete galavanized)

Stone Pad 300x300x75

ACSR Dog conductor

7/16 SWG Earth wire

11 KV Line Material for Guarding Guarding angle 65x65x6 mm,1900 mm long with holding clamp, packing piece, nut & bolts etc.

G.I. Wire No. 6 SWG along the span (For 1 Km. line)

G.I. Wire No. 8 SWG accross the span (For 1 Km. line)

Turn Buckle

Eye Bolt

G.I. Wire No. 16 SWG for binding

Design, fabrication, and installation of a pre-engineered steel shed structure, utilizing prefabricated components for efficient assembly of 14mtrs. X 40 mtrs. The shed will have a clear internal height of 9 meters, ensuring unobstructed space for various applications. The construction will incorporate structural steel framing, high-strength roofing, and wall cladding materials, with provisions for optimal load-bearing, durability, and weather resistance. Installation of ice melting system on the inner side of roof of above pre-engineered steel shed, utilizing suitable technology to prevent ice accumulation and ensure safe, consistent operation during freezing conditions. The system will include heating elements (electric or hydronic, depending on project requirements) embedded or mounted along roof edges, gutters, and drainage pathways to facilitate efficient melting and prevent ice dams. This solution shall be designed to operate automatically or be activated as needed, incorporating thermostatic controls and sensors to detect temperature and moisture levels,along with rail arrangement for movement of power T/F across the yard.with 5 year warranty.including suitable painting, cc work for all structures /equipments.

Items for substation office of reputed make i) Steel office Table

ii) Steel Chairs

iii) Steel Almirah

iv) Steel Cabinet

v) Rubber mat Class C 3 mm Synthetic Insulating Mat- Confirming to IS 15652 : 2006. Along the all equipments in Control Room.

vi) Shock treatment charts

vii) Danger Board,

viii) Single Line Diagram Board

ix) First Aid Box

x) Sub-station Name Board

xi) Shut down / Break down board (Bi-lingual Hindi & English)

xiii) Max. Min. load Board

xiv) Instruction Board

single line diagram board of size 2 1/2x 1 1/2 polyflex board with frame,duly painted & writing

Name plate of equipment TG, LI, BI, PI, BG, CT, PT, CB, LA etc. (Size 9"x5" with white base, red border & letter written in red color)

Sundries items Cable tie, Alu lug, Copper lug & HT, LT tape, pvc compound, ferrule, pvc flexible pipe, paint writing on panels, HT LT diff size cable gland.

xv) Equipment & feeder name plate

xvi) HT Hand Gloves 4 pair for 11 kv & 4 pair for 33 kv suitable fot operation at negative tempratures

xvii) Wall Clock

xviii) Insulated electrical Plier Taparia

xix) D-Spanner Set Taparia

xx) 3 cells Torch

xxi) Pipe wrench, 12" Taparia

xxii) Earth chain brass 12 mtr. Length

xxiii) Dust bin branded make

xxiv) Doormat (5'x3')

Testing equipments of reputed make i) 5 KV Megger Digital

ii) 2.5 KV Megger Digital

iii) Earth Megger Digital

iv) Turn Ration Meter

v) oil fillter machine 1000 GL with all fittings

vi) High voltage testing set 100 KV

vii) Automatic Oil BDV tester machine

viii) Winding residance meter for HV and LC

ix) DG set 125 KVA

ix) empty oil drum 209 ltr for diesel storage

x) Industrial blower10 hp

Sign Board 1 No. 6x4 feet (lengh x breadth) made of MS sheet 14 Gauge(1.6mm thickness) with angle suport of (3"x3",6mm) and height of board 6 feet from ground level to bottom of board and length of angle to be buried in the ground 1.50 feet with 1 feet hole pass inside,painting on board ( enamel paint with red oxide base coat)and printing on board (colour printing by Screen printing method)to indicate Name of scheme.

Description of Work / Item(s)

Amount

33 KV MATERIAL 33/11 kV, 5 MVA power transformer with an on-load tap changer (OLTC) designed for special purpose applications. The transformer shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C with 5 year warranty. The transformer shall be manufactured/ assembled at site, with considerations for high-altitude effects on dielectric strength and thermal performance. It shall include features to ensure efficient operation under low-temperature,high/low humid conditions, appropriate insulation, cooling & heating arrangement systems, and provisions for Air lifting. with all required transformer earthing. i) 5 MVA, 33/11 kV power transformer all raw material including all fittings & accessories

33/0.433 KV 100 KVA Station Transformer Level-2 copper wound. The transformer shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C with 5 year warranty.It has to ensure efficient operation under low-temperature,high/low humid conditions, appropriate insulation, cooling & heating arrangement systems, and provisions for Air lifting.

Steel tubular Pole 11 mtr. Long (STP-410 )SP-55 ( complete galavanized)

MS Channel 125x65x6mm, 2.800mtr. long (Top Channel) with all fixing arrangment Nuts & Bolts all galvanized

PP & clamps for suitable size for Top portion of STP-410, SP-55 Pole

MS Channel 125x65x6mm, 2.800 mtr. Long (for Transformer Base) with all fixing arrangment Nuts & Bolts all galvanized

PP of suitable size for Bottom portion of STP-410, SP-55 Pole

33 KV Line isolater Vertical Type with all accessories( complete galavanized)

33 KV Fuse set

PP of suitable size for Middle portion of STP-410, SP-55 Pole

33 KV lightening arrestor

33 KV 3x50 sq. mm.,Al conducterTr-XLPE insulated,Cu screened, armoured,PVC sheathed Power cable . The equipment shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C. (As per TS of UPCL).

33 kV Danger board with clamp Bolts & Nuts (all galavanized)

GI pipe 4" dia. 3mtr long ( for double pole & bus bar gantry) (all galavanized)

Touch proof Cable jointing kit outdoor type suitable for 3Cx50 mm TR-XLPE cable 33 KV.

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole)

Clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized for Anti climbing device (on SP-55 Pole)

Rod type earthing complete for pole,LT Panel & metering Cubical with GI wire 6 SWG

Compound filled earthing/Chemical Earthing(with G.I. Strip 35x6mm for Neutral Earthing of Transformer .

Compound filled earthing/Chemical Earthing of Transformer Body(with G.I. Strip 35x6mm),Other structure& Equipment( with GI Wire of 8 SWG) .

Compound filled earthing/Chemical Earthingof Lightning Arrestor with G.I. Strip 35x6mm .

Alluminium paint (Double Coat)

Red Oxide paints

33 KV Lightening Arrester

36 kV, 1250A, 26.3 kA for 3 sec., 3 Pole, 50 Hz., (Single Break per Pole), Gang operated, Permanent Magnetic Actuator Operated, Outdoor, Solid Dielectric Insulated, Compact, Vacuum Circuit Breakers, including in-built epoxy resin-cast Dry Type Current Transformers (600-300/1-1A, Core 1: Class 0.5/5VA & Core 2: Class 5P10/7.5VA),Scada operated. The equipment shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C with 5 year warranty.. (As per TS of UPCL).Eraction charges includes complete earthing of Structure. (i) Incomer

(ii) Outgoing (2O/G+1 spare)

(ii) Bus coupler

Control & Relay Panel with SCADA operated and relay as per IEC-61850 with PRP with ed.2 for 33 KV .with 5 year warranty.Eraction charges includes complete earthing of pannel. (i) Incomer Fedder

(ii) Outgoing for Transformers.(2O/G+1 spare)

(ii) Bus coupler

36kV, 800A, 26.3kA/3 sec., outdoor type, 3-Ph gang operated complete with operating mechanism & supporting structure (Single Break per Pole), Maually and motarised Operated, Hook-stick Operated, Off-load Isolator with Earth Switch and suitable for Double Pole Structure Mounting/structure. The equipment shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C with 5 year warranty. . (As per TS of UPCL).Eraction charges includes complete earthing of pannel. (i) Incomer

(ii) Outgoing

(ii) Bus coupler

33 KV Al Conductor ,TR-XLPE insulated,Cu tape screened,armoured,PVc sheathed 1Cx630 sq. mm power cable . The equipment shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C. (As per TS of UPCL).

33 KV Touch proof jointing kit outdoor type suitable for 1Cx630 mm TR-XLPE cable

33 KV Touch proof jointing kit indoor type suitable for 1Cx630 mm TR-XLPE cable

33/110-v KV PT 1 phase oil cooled. The equipment shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C. (As per TS of UPCL).Eraction charges includes complete earthing of pannel. Eraction charges includes complete earthing of pannel.

Electro Atomospheric Compensator: A intellgent passive sensor providing protection against lightening and real time monitoring of weather via Software covering the entire substation area.

11KV MATERIAL 12 kV, 26.3 kA for 3 sec., 3 Pole, 50 Hz., (Single Break per Pole), Gang operated, Permanent Magnetic Actuator Operated, Outdoor, Solid Dielectric Insulated, Compact, Vacuum Circuit Breakers, including in-built epoxy resin-cast dry type current transformer Scada operated. The equipment shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C with 5 year warranty. (As per TS of UPCL).Eraction charges includes complete earthing of pannel. (i) 12kV, 1250A, 26.3kA/3 sec. For Incomer

(ii) 12kV, 1250A, 26.3kA/3 sec. For outgoing Feeders

(iii) 12kV, 1250A, 26.3kA/3 sec. For Bus Coupler

Control & Relay Panel with SCADA operated and relay as per IEC-61850 with PRP ed. 2 for 11 KV.with 5 year warranty. Eraction charges includes complete earthing of pannel. (i) For Incomer (900/1-1-1A, Core 1: Class 0.5/5VA & Core 2: Class 5P10/7.5VA).

(ii) For Feeders (400-200/1-1A, Core 1: Class 0.5/5VA & Core 2: Class 5P10/7.5VA).

(iii) For Bus Coupler (400-200/1-1A, Core 1: Class 0.5/5VA & Core 2: Class 5P10/7.5VA).

12kV, 800A, 26.3kA/3 sec., outdoor type, 3-Ph gang operated, complete with operating mechanism & supporting structure (Single Break per Pole), Maually Operated, Hook-stick Operated, Off-load Isolator with Earth Switch and suitable for Double Pole Structure Mounting ,Scada operated. The equipment shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C with 5 year warranty.. (As per TS of UPCL). Eraction charges includes complete earthing of pannel. (i) Isolator for Incomer

(ii) Isolator for Feeders

11KV, 1Cx630 Sq. mm. TR-XLPE Cable with cleat from Transformer to incomer VCB, VCB to 11 kv Bay & its laying in trench.The equipment shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C with 5 year warranty.. (As per TS of UPCL).

11 KV Touch proof jointing kit outdoor type suitable for 1Cx630 mm .

11 KV Touch proof jointing kit indoor type suitable for 1Cx630 mm .

11 KV ,3x300 sq. mm. TR-XLPE cable with cleat from outgoing VCB to out going feeder poles .

11 KV ,3x300 sq. mm. TR-XLPE cable with cleat for 11 KV underground Line .

11 KV Touch Proof Cable jointing kit for 3x300 sq. mm (Outdoor)

11 KV Touch Proof Cable jointing kit for 3x300 sq. mm (indoor)

11 KV XLPE HS J/K 3X300 SQ.mm Touch Proof STRAIGHT THROUGH

Concrete route marker for HT cable having emboss "DANGER UPCL 11 KV CABLE BELOW" and directional arrows

B-Class GI pipe 150 mm as per IS 1239, at culverts , crossings, by side of bridges with support hangers, fastners , complete in all respects.(galavananized)

Supply and Laying of HDPE pipe (PN-6, PE-80 of outer dia size 160 mm.) with coupler, , short and long bends in open cut trenches IS :7634 Part -2 for installation of power cables as per the code of practice for installation and maintenance of power cables as per IS 1255 :1983 or latest amendments.

HT cable Warning Tape

11/.433 kV, 2 MVA distribution transformer designed for special purpose applications. The transformer shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C with 5 year warranty. The transformer shall be assembled at site, with considerations for high-altitude effects on dielectric strength and thermal performance. It shall include features to ensure efficient operation under low-temperature,high/low humid conditions, appropriate insulation, cooling & heating arrangement systems, and provisions for Air lifting.with all required transformer earthing. i) 2 MVA, 11/.433 kV DTR all raw material including all fittings & accessories

12 kV SCADA compatible HT switchgear, 01 No FPI , LV switchgear consisting of 3200A, 4P microprocessor based ACB and 04 Nos 800 A microprocessor controlled MCCB (d) outdoor enclosure to protect equipments from heavy snow fall and rain.All accesories / protections as per specification. with 5 year warranty.

11 KV PT 1 phase . The equipment shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C with 5 year warranty.. (As per TS of UPCL).

IP CCTV camara 10 nos. (AI Based)

Duct sealing material / sealing length upto 15 cm with expanding polyurethane filler or other sealant material suitable for PVC / HDPE sheathed cables to seal all duct openings.

LT MATERIALS LT Power Cable 3.5Cx70 sq. mm. from station T/F to AC/DB along with suitable lugs and its laying double circuit.The equipment shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C. (As per TS of UPCL).

i) 2x2.5 Sq.mm LT Control Cable

ii) 4x2.5 Sq.mm LT Control Cable

iii) 10x2.5 Sq.mm LT Control Cable

LT PVC Cable 2Cx6 sq. mm

LT PVC Cable 4Cx10 sq. mm

DC INSTRUMENTS 24V, DC 300 AH Battery, Tubular ,C10

Float cum boost battery charger cum inverter 24V with trickle charging arrangement with all meters of AC/DC voltage & ammeter etc. of prescribed specifications.

D.C. Distribution Board of prescribed specification.

AC INSTURMENTS AC Power distribution board of prescribed specification & lighting system consisting of AC Power Distribution Board

1400 mm sweep ceiling fan with electronic regulator.

Pedestal fans

Exhaust fan with controls

40W industrial type T/L Lightning fixture.

150W, LED lamp with Control Gear (for peripheral lighting including mounting accessories)

250W, LED lamp with Control Gear (for switchyard lighting including mounting accessories)

Steel Tubular Poles 8 m long (STP 8 M, 410 MPa , SP-10) as per IS 2713 (Parts 1 to 3): 1980 (All galvanized)

EARTH MAT/CIVIL WORK Earth Mat MS round 32 mm dia 6.21 Kg/mtr for laying earth mat/ 32 No electrodes

Gravel Pitching of size 1/2" to 3/4"

a) 75mmx8mm G.I. Strip for earthing

b) 50mm x 5 mm G.I. Strip for earthing

Rod type earthing of pole by MS earthing rod 20ɸx2500mm & GI wire 8 SWG with Bolts Clamp, & Nuts All Galvanised.(For Fencing, ACDB & DCDB) Annexure C37

MISCELANEOUS GI (RS Joist, Channel, angle, Rail as per RESPO drawings enclosed) for Misc. structures for 33 KV & 11 KV Terminal Gantry Bay, bus bar gantry,with copper conductor for bus, LA, PT, PI, Isolators etc. as per drawings & design and site conditions including fabrication, welding, nut & bolt All Galvanised.The equipment shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C & can withstand harsh weather condition inclusi(As per TS of UPCL). with earthing of all structure.

ACSR Panther conductor

Fire fighting accessories including i) 4 sand bucket with angle iron chuggi type stand.

ii) Carbon dioxide (CO2) type fire extinguishers conforming to IS 2878 - 1976 and cylinders fully charged of 4.5 Kg capacity.

iii) Foam type fire extinguishers, Portable type 5 lit capacity hanged on wall with bracket complete as required

33KV LINE MISCELLANEOUS MATERIALS Wedge connector for Panther to Panther

Wedge connector for Panther to Dog

Connectors suitable for Panther. i) For LA suitable for Panther

ii) For Isolators suitable for Panther

iii) For CT/PTs suitable for Panther

iv) For SF-6 CB suitable for Panther

v) For Transformers suitable for Panther.

vi) Connector Panther For P.I.

vii) For Fuse suitable for panther

vii)Reinforcement steel M.S. Bar 12mm

Perforated tray 400mm width for cable trench

Perforated tray 200 mm width for cable trench

Perforated tray 100 mm width for cable trench

11KV LINE MISCELLANIOUS MATERIALS 11 kV Outgoing Double Pole structure of SP-23 complete with Top channel for holding cable & necessary clamps etc. S.T. Pole 8.5 mtr. Long SP-23 ( complete galavanized)

11 kV top channel 100x50x6mm 2.24 mtr. Long with nuts & bolt all galvanized ( for Double pole)

PP of suitable size for Top portion of STP-410, SP-23 Pole ( complete galavanized)

11 KV lightening arrestor

11 KV TPMO complete 400 Amp ( complete galavanized)

11 kV, 3-ph, Drop Out fuse units (set of 3 units) along with Support Insulators,fuse barrel etc.

11 kV channel 100x50x6mm 2.24 mtr. Long with nuts & bolt all galvanized (for SP-23 pole)for AB Switch and DO Fuse

PP of suitable size for Middle portion of STP-410, SP-23 Pole

11 kV Base channel 100x50x6mm 2.24 mtr. Long with clamps,nuts & bolt all galvanized for Cable GI Pipe Support

PP of suitable size for Bottom portion of STP-410, SP-23 Pole

GI pipe 4" dia. 3mtr long ( for double pole & bus bar gantry)

11 kV Polymer Pin Insulator complete

11 kV Compsite Polymer Disc Insulator B & S type

Disc fitting for Dog 70 KN B&S type

11 kV Danger Board with Clamp with N&B

Wedge connector for DOG

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole)

Clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized for Anti climbing device.(on SP-23 Pole)

Rod type earthing of pole by MS earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete .

Alluminium paint (Double Coat)

Red Oxide paints

11 kv line material including CC work,with all accessories erection, complete in all respect S.T. Pole 8.5 mtr. Long SP-23 for single pole structure ( complete galavanized)

S.T. Pole 8.5 mtr. Long SP-23 Double pole structure ( complete galavanized)

S.T. Pole 8.5 mtr. Long SP-23 for four pole structure ( complete galavanized)

Cross Bracing set 65x65x6 mm MS angle

x arm 11 kv ( complete galavanized)

F bracket for 11kV

11 KV Polymer disc insulator B & S

11 KV disc fitting for weasel

11 KV Polymer Pin Insulator with Pin (N&B)

Earth wire clamps With N&B

PG Clamps for Dog

11 KV TPMO complete ( complete galavanized)

G.S. Stay set GI 1800x16 mm comp.

Stay wire 7/10

MS Earthing rod 20x2500mm

GI Wire 6 SWG

11 KV lightening arrestor

11 KV fuse set omplete.

M.S. Bolt & Nut Off size ( complete galavanized)

P.P. & Clamps for S.T. Pole-sp-23 ( complete galavanized)

Bracing Clamp for ST Pole -sp-23 ( complete galavanized)

Stay clamp for ST Pole -sp-23 ( complete galavanized)

Clamp of required size for holding hdpe pipe for cable supporting angle, ( complete galavanized)

11 KV Danger board with clamp ( complete galavanized)

Number plate for sp-23 ( complete galavanized)

Stone Pad 300x300x75

ACSR Dog conductor

7/16 SWG Earth wire

11 KV Line Material for Guarding Guarding angle 65x65x6 mm,1900 mm long with holding clamp, packing piece, nut & bolts etc.

G.I. Wire No. 6 SWG along the span (For 1 Km. line)

G.I. Wire No. 8 SWG accross the span (For 1 Km. line)

Turn Buckle

Eye Bolt

G.I. Wire No. 16 SWG for binding

Design, fabrication, and installation of a pre-engineered steel shed structure, utilizing prefabricated components for efficient assembly of 14mtrs. X 40 mtrs. The shed will have a clear internal height of 9 meters, ensuring unobstructed space for various applications. The construction will incorporate structural steel framing, high-strength roofing, and wall cladding materials, with provisions for optimal load-bearing, durability, and weather resistance. Installation of ice melting system on the inner side of roof of above pre-engineered steel shed, utilizing suitable technology to prevent ice accumulation and ensure safe, consistent operation during freezing conditions. The system will include heating elements (electric or hydronic, depending on project requirements) embedded or mounted along roof edges, gutters, and drainage pathways to facilitate efficient melting and prevent ice dams. This solution shall be designed to operate automatically or be activated as needed, incorporating thermostatic controls and sensors to detect temperature and moisture levels,along with rail arrangement for movement of power T/F across the yard.with 5 year warranty.including suitable painting, cc work for all structures /equipments.

Items for substation office of reputed make i) Steel office Table

ii) Steel Chairs

iii) Steel Almirah

iv) Steel Cabinet

v) Rubber mat Class C 3 mm Synthetic Insulating Mat- Confirming to IS 15652 : 2006. Along the all equipments in Control Room.

vi) Shock treatment charts

vii) Danger Board,

viii) Single Line Diagram Board

ix) First Aid Box

x) Sub-station Name Board

xi) Shut down / Break down board (Bi-lingual Hindi & English)

xiii) Max. Min. load Board

xiv) Instruction Board

single line diagram board of size 2 1/2x 1 1/2 polyflex board with frame,duly painted & writing

Name plate of equipment TG, LI, BI, PI, BG, CT, PT, CB, LA etc. (Size 9"x5" with white base, red border & letter written in red color)

Sundries items Cable tie, Alu lug, Copper lug & HT, LT tape, pvc compound, ferrule, pvc flexible pipe, paint writing on panels, HT LT diff size cable gland.

xv) Equipment & feeder name plate

xvi) HT Hand Gloves 4 pair for 11 kv & 4 pair for 33 kv suitable fot operation at negative tempratures

xvii) Wall Clock

xviii) Insulated electrical Plier Taparia

xix) D-Spanner Set Taparia

xx) 3 cells Torch

xxi) Pipe wrench, 12" Taparia

xxii) Earth chain brass 12 mtr. Length

xxiii) Dust bin branded make

xxiv) Doormat (5'x3')

Testing equipments of reputed make i) 5 KV Megger Digital

ii) 2.5 KV Megger Digital

iii) Earth Megger Digital

iv) Turn Ration Meter

v) oil fillter machine 1000 GL with all fittings

vi) High voltage testing set 100 KV

vii) Automatic Oil BDV tester machine

viii) Winding residance meter for HV and LC

ix) DG set 125 KVA

ix) empty oil drum 209 ltr for diesel storage

x) Industrial blower10 hp

Sign Board 1 No. 6x4 feet (lengh x breadth) made of MS sheet 14 Gauge(1.6mm thickness) with angle suport of (3"x3",6mm) and height of board 6 feet from ground level to bottom of board and length of angle to be buried in the ground 1.50 feet with 1 feet hole pass inside,painting on board ( enamel paint with red oxide base coat)and printing on board (colour printing by Screen printing method)to indicate Name of scheme.

Description of Work / Item(s)

Amount

33 KV MATERIAL 33/11 kV, 5 MVA power transformer with an on-load tap changer (OLTC) designed for special purpose applications. The transformer shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C with 5 year warranty. The transformer shall be manufactured/ assembled at site, with considerations for high-altitude effects on dielectric strength and thermal performance. It shall include features to ensure efficient operation under low-temperature,high/low humid conditions, appropriate insulation, cooling & heating arrangement systems, and provisions for Air lifting. with all required transformer earthing. i) 5 MVA, 33/11 kV power transformer all raw material including all fittings & accessories

ii) 5 MVA, 33/11 kV power transformer manufacturing at site.( manufacturer shall have to adhere all industrial specification during manufacturing process).

Concreting of power X'mer foundation including rail 90 Lbs,ms angle 50x50x6 mm, MS bar 12 mm dia,Excavation of earth in mixed soil,CC 1:4:8,Brick work in 1:4,RCC 1:1.5:3,Plaster in 1:4.As per approved drawing by UPCL. Minimum Height from ground level should be 3 feet.

33/0.433 KV 100 KVA Station Transformer Level-2 copper wound. The transformer shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C with 5 year warranty.It has to ensure efficient operation under low-temperature,high/low humid conditions, appropriate insulation, cooling & heating arrangement systems, and provisions for Air lifting.

Steel tubular Pole 11 mtr. Long (STP-410 )SP-55 ( complete galavanized)

MS Channel 125x65x6mm, 2.800mtr. long (Top Channel) with all fixing arrangment Nuts & Bolts all galvanized

PP & clamps for suitable size for Top portion of STP-410, SP-55 Pole

MS Channel 125x65x6mm, 2.800 mtr. Long (for Transformer Base) with all fixing arrangment Nuts & Bolts all galvanized

PP of suitable size for Bottom portion of STP-410, SP-55 Pole

33 KV Line isolater Vertical Type with all accessories( complete galavanized)

33 KV Fuse set

PP of suitable size for Middle portion of STP-410, SP-55 Pole

33 KV lightening arrestor

33 KV 3x50 sq. mm.,Al conducterTr-XLPE insulated,Cu screened, armoured,PVC sheathed Power cable . The equipment shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C. (As per TS of UPCL).

33 kV Danger board with clamp Bolts & Nuts (all galavanized)

GI pipe 4" dia. 3mtr long ( for double pole & bus bar gantry) (all galavanized)

Touch proof Cable jointing kit outdoor type suitable for 3Cx50 mm TR-XLPE cable 33 KV.

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole)

Clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized for Anti climbing device (on SP-55 Pole)

Rod type earthing complete for pole,LT Panel & metering Cubical with GI wire 6 SWG

Compound filled earthing/Chemical Earthing(with G.I. Strip 35x6mm for Neutral Earthing of Transformer .

Compound filled earthing/Chemical Earthing of Transformer Body(with G.I. Strip 35x6mm),Other structure& Equipment( with GI Wire of 8 SWG) .

Compound filled earthing/Chemical Earthingof Lightning Arrestor with G.I. Strip 35x6mm .

Alluminium paint (Double Coat)

Red Oxide paints

Grouting with Cement Concreating ratio with 1:4:8

33 KV Lightening Arrester

36 kV, 1250A, 26.3 kA for 3 sec., 3 Pole, 50 Hz., (Single Break per Pole), Gang operated, Permanent Magnetic Actuator Operated, Outdoor, Solid Dielectric Insulated, Compact, Vacuum Circuit Breakers, including in-built epoxy resin-cast Dry Type Current Transformers (600-300/1-1A, Core 1: Class 0.5/5VA & Core 2: Class 5P10/7.5VA),Scada operated. The equipment shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C with 5 year warranty.. (As per TS of UPCL).Eraction charges includes complete earthing of Structure. (i) Incomer

(ii) Outgoing (2O/G+1 spare)

(ii) Bus coupler

Control & Relay Panel with SCADA operated and relay as per IEC-61850 with PRP with ed.2 for 33 KV .with 5 year warranty.Eraction charges includes complete earthing of pannel. (i) Incomer Fedder

(ii) Outgoing for Transformers.(2O/G+1 spare)

(ii) Bus coupler

36kV, 800A, 26.3kA/3 sec., outdoor type, 3-Ph gang operated complete with operating mechanism & supporting structure (Single Break per Pole), Maually and motarised Operated, Hook-stick Operated, Off-load Isolator with Earth Switch and suitable for Double Pole Structure Mounting/structure. The equipment shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C with 5 year warranty. . (As per TS of UPCL).Eraction charges includes complete earthing of pannel. (i) Incomer

(ii) Outgoing

(ii) Bus coupler

33 KV Al Conductor ,TR-XLPE insulated,Cu tape screened,armoured,PVc sheathed 1Cx630 sq. mm power cable . The equipment shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C. (As per TS of UPCL).

33 KV Touch proof jointing kit outdoor type suitable for 1Cx630 mm TR-XLPE cable

33 KV Touch proof jointing kit indoor type suitable for 1Cx630 mm TR-XLPE cable

33/110-v KV PT 1 phase oil cooled. The equipment shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C. (As per TS of UPCL).Eraction charges includes complete earthing of pannel. Eraction charges includes complete earthing of pannel.

Electro Atomospheric Compensator: A intellgent passive sensor providing protection against lightening and real time monitoring of weather via Software covering the entire substation area.

11KV MATERIAL 12 kV, 26.3 kA for 3 sec., 3 Pole, 50 Hz., (Single Break per Pole), Gang operated, Permanent Magnetic Actuator Operated, Outdoor, Solid Dielectric Insulated, Compact, Vacuum Circuit Breakers, including in-built epoxy resin-cast dry type current transformer Scada operated. The equipment shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C with 5 year warranty. (As per TS of UPCL).Eraction charges includes complete earthing of pannel. (i) 12kV, 1250A, 26.3kA/3 sec. For Incomer

(ii) 12kV, 1250A, 26.3kA/3 sec. For outgoing Feeders

(iii) 12kV, 1250A, 26.3kA/3 sec. For Bus Coupler

Control & Relay Panel with SCADA operated and relay as per IEC-61850 with PRP ed. 2 for 11 KV.with 5 year warranty. Eraction charges includes complete earthing of pannel. (i) For Incomer (900/1-1-1A, Core 1: Class 0.5/5VA & Core 2: Class 5P10/7.5VA).

(ii) For Feeders (400-200/1-1A, Core 1: Class 0.5/5VA & Core 2: Class 5P10/7.5VA).

(iii) For Bus Coupler (400-200/1-1A, Core 1: Class 0.5/5VA & Core 2: Class 5P10/7.5VA).

12kV, 800A, 26.3kA/3 sec., outdoor type, 3-Ph gang operated, complete with operating mechanism & supporting structure (Single Break per Pole), Maually Operated, Hook-stick Operated, Off-load Isolator with Earth Switch and suitable for Double Pole Structure Mounting ,Scada operated. The equipment shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C with 5 year warranty.. (As per TS of UPCL). Eraction charges includes complete earthing of pannel. (i) Isolator for Incomer

(ii) Isolator for Feeders

11KV, 1Cx630 Sq. mm. TR-XLPE Cable with cleat from Transformer to incomer VCB, VCB to 11 kv Bay & its laying in trench.The equipment shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C with 5 year warranty.. (As per TS of UPCL).

11 KV Touch proof jointing kit outdoor type suitable for 1Cx630 mm .

11 KV Touch proof jointing kit indoor type suitable for 1Cx630 mm .

11 KV ,3x300 sq. mm. TR-XLPE cable with cleat from outgoing VCB to out going feeder poles .

11 KV ,3x300 sq. mm. TR-XLPE cable with cleat for 11 KV underground Line .

11 KV Touch Proof Cable jointing kit for 3x300 sq. mm (Outdoor)

11 KV Touch Proof Cable jointing kit for 3x300 sq. mm (indoor)

11 KV XLPE HS J/K 3X300 SQ.mm Touch Proof STRAIGHT THROUGH

Concrete route marker for HT cable having emboss "DANGER UPCL 11 KV CABLE BELOW" and directional arrows

B-Class GI pipe 150 mm as per IS 1239, at culverts , crossings, by side of bridges with support hangers, fastners, complete in all respects .(galavananized)

Supply and Laying of HDPE pipe (PN-6, PE-80 of outer dia size 160 mm.) with coupler, , short and long bends in open cut trenches IS :7634 Part -2 for installation of power cables as per the code of practice for installation and maintenance of power cables as per IS 1255 :1983 or latest amendments.

HT cable Warning Tape

11/.433 kV, 2 MVA distribution transformer designed for special purpose applications. The transformer shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C with 5 year warranty. The transformer shall be assembled at site, with considerations for high-altitude effects on dielectric strength and thermal performance. It shall include features to ensure efficient operation under low-temperature,high/low humid conditions, appropriate insulation, cooling & heating arrangement systems, and provisions for Air lifting.with all required transformer earthing. i) 2 MVA, 11/.433 kV DTR all raw material including all fittings & accessories

ii) 2 MVA, 11/.433 kV DTR manufacturing at site( manufacturer shall have to adhere all industrial specification during manufacturing process).

12 kV SCADA compatible HT switchgear, 01 No FPI , LV switchgear consisting of 3200A, 4P microprocessor based ACB and 04 Nos 800 A microprocessor controlled MCCB (d) outdoor enclosure to protect equipments from heavy snow fall and rain.All accesories / protections as per specification. with 5 year warranty.

Concreting of CSS/DTR foundation (with matching asthetics on side panels/walls and top canopy of adequate protection for hiding of electrical equipments like DTR, HT/LT breakers, cables etc) including rail 90 Lbs,ms angle 50x50x6 mm, MS bar 12 mm dia,Excavation of earth in mixed soil,CC 1:4:8,Brick work in 1:4,RCC 1:1.5:3,Plaster in 1:4.As per approved drawing by UPCL.(with matching asthetics on side panels/walls and top canopy for adequate protection for hiding of electrical equipments like DTR, HT/LT breakers, cables etc) Minimum Height from ground level should be 3 feet.

11 KV PT 1 phase . The equipment shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C with 5 year warranty.. (As per TS of UPCL).

IP CCTV camara 10 nos. (AI Based)

Duct sealing material / sealing length upto 15 cm with expanding polyurethane filler or other sealant material suitable for PVC / HDPE sheathed cables to seal all duct openings.

LT MATERIALS LT Power Cable 3.5Cx70 sq. mm. from station T/F to AC/DB along with suitable lugs and its laying double circuit.The equipment shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C. (As per TS of UPCL).

i) 2x2.5 Sq.mm LT Control Cable

ii) 4x2.5 Sq.mm LT Control Cable

iii) 10x2.5 Sq.mm LT Control Cable

LT PVC Cable 2Cx6 sq. mm

LT PVC Cable 4Cx10 sq. mm

DC INSTRUMENTS 24V, DC 300 AH Battery, Tubular ,C10

Float cum boost battery charger cum inverter 24V with trickle charging arrangement with all meters of AC/DC voltage & ammeter etc. of prescribed specifications.

D.C. Distribution Board of prescribed specification.

AC INSTURMENTS AC Power distribution board of prescribed specification & lighting system consisting of AC Power Distribution Board

1400 mm sweep ceiling fan with electronic regulator.

Pedestal fans

Exhaust fan with controls

40W industrial type T/L Lightning fixture.

150W, LED lamp with Control Gear (for peripheral lighting including mounting accessories)

250W, LED lamp with Control Gear (for switchyard lighting including mounting accessories)

Steel Tubular Poles 8 m long (STP 8 M, 410 MPa , SP-10) as per IS 2713 (Parts 1 to 3): 1980 (All galvanized)

EARTH MAT/CIVIL WORK Earth Mat MS round 32 mm dia 6.21 Kg/mtr for laying earth mat/ 32 No electrodes

Gravel Pitching of size 1/2" to 3/4"

a) 75mmx8mm G.I. Strip for earthing

b) 50mm x 5 mm G.I. Strip for earthing

Rod type earthing of pole by MS earthing rod 20ɸx2500mm & GI wire 8 SWG with Bolts Clamp, & Nuts All Galvanised.(For Fencing, ACDB & DCDB) Annexure C37

Straightening and laying of Earth mat of 32 mm M S round 0.6 mtr or 1 mtr deep in mixed soil according to drawing or as per UPCL direction or/and as per site requirement. Making T-joints, cross joint and Lap joints by welding of M S round bar together using cleats of MS Angles 65x65x6 mm, chipping the slag and painting of the joints with black bitumen paint (including supply of paint) to avoid rusting. Cutting & making electrode 2.5 mtr long with conical pointed bottom and driving of the electrode in ground so that the top of electrode remains 450 mm below ground level. Backfilling of soil in trenches, ramming and leveling of trench properly after completion of earthmat and earthing work is complete. Making of Delta/Bridge earthing for structure/panels i.e. 33 KV LA, 11 KV LA, 33 KV panels, 11 KV panels, ACDB, DCDB, Neutral of power & station transformer.

Special earthing by treatment of soil with highly conducted material like combination of bentonite, conductive cement, coke dust, sodium carbonate, MgSo4, NaCl & CaCl2 as per ISS 3043-1987(including of all Material & Labour)

MISCELANEOUS GI (RS Joist, Channel, angle, Rail as per RESPO drawings enclosed) for Misc. structures for 33 KV & 11 KV Terminal Gantry Bay, bus bar gantry,with copper conductor for bus, LA, PT, PI, Isolators etc. as per drawings & design and site conditions including fabrication, welding, nut & bolt All Galvanised.The equipment shall be suitable for continuous operation at an altitude of 4000 meters above sea level and in ambient temperatures as low as -40°C & can withstand harsh weather condition inclusi(As per TS of UPCL). with earthing of all structure.

Wire mesh fencing with gate, stay support, toe wall, duly painted on both site.(including of all Material & Labour)

ACSR Panther conductor

Fire fighting accessories including i) 4 sand bucket with angle iron chuggi type stand.

ii) Carbon dioxide (CO2) type fire extinguishers conforming to IS 2878 - 1976 and cylinders fully charged of 4.5 Kg capacity.

iii) Foam type fire extinguishers, Portable type 5 lit capacity hanged on wall with bracket complete as required

33KV LINE MISCELLANEOUS MATERIALS Wedge connector for Panther to Panther

Wedge connector for Panther to Dog

Connectors suitable for Panther. i) For LA suitable for Panther

ii) For Isolators suitable for Panther

iii) For CT/PTs suitable for Panther

iv) For SF-6 CB suitable for Panther

v) For Transformers suitable for Panther.

vi) Connector Panther For P.I.

vii) For Fuse suitable for panther

vii)Reinforcement steel M.S. Bar 12mm

Perforated tray 400mm width for cable trench

Perforated tray 200 mm width for cable trench

Perforated tray 100 mm width for cable trench

11KV LINE MISCELLANIOUS MATERIALS 11 kV Outgoing Double Pole structure of SP-23 complete with Top channel for holding cable & necessary clamps etc. S.T. Pole 8.5 mtr. Long SP-23 ( complete galavanized)

11 kV top channel 100x50x6mm 2.24 mtr. Long with nuts & bolt all galvanized ( for Double pole)

PP of suitable size for Top portion of STP-410, SP-23 Pole ( complete galavanized)

11 KV lightening arrestor

11 KV TPMO complete 400 Amp ( complete galavanized)

11 kV, 3-ph, Drop Out fuse units (set of 3 units) along with Support Insulators,fuse barrel etc.

11 kV channel 100x50x6mm 2.24 mtr. Long with nuts & bolt all galvanized (for SP-23 pole)for AB Switch and DO Fuse

PP of suitable size for Middle portion of STP-410, SP-23 Pole

11 kV Base channel 100x50x6mm 2.24 mtr. Long with clamps,nuts & bolt all galvanized for Cable GI Pipe Support

PP of suitable size for Bottom portion of STP-410, SP-23 Pole

GI pipe 4" dia. 3mtr long ( for double pole & bus bar gantry)

11 kV Polymer Pin Insulator complete

11 kV Compsite Polymer Disc Insulator B & S type

Disc fitting for Dog 70 KN B&S type

11 kV Danger Board with Clamp with N&B

Wedge connector for DOG

Anti-Climbing Device (2.5mm dia (12SWG) galvanized barbed wire 3.5 kg per pole)

Clamp made of 50x8 mm strip with Nuts, Bolts & Warshers all galvanized for Anti climbing device.(on SP-23 Pole)

Rod type earthing of pole by MS earthing rod 20ɸx2500mm with welded Clamp 40X3mm & GI wire 8 SWG (0.5 Kg) with Bolts Clamp, Washers & Nuts complete .

Alluminium paint (Double Coat)

Red Oxide paints

Grouting with Cement Concreating ratio with 1:3:6

11 kv line material including CC work,with all accessories erection, complete in all respect S.T. Pole 8.5 mtr. Long SP-23 for single pole structure ( complete galavanized)

S.T. Pole 8.5 mtr. Long SP-23 Double pole structure ( complete galavanized)

S.T. Pole 8.5 mtr. Long SP-23 for four pole structure ( complete galavanized)

Cross Bracing set 65x65x6 mm MS angle

x arm 11 kv ( complete galavanized)

F bracket for 11kV

11 KV Polymer disc insulator B & S

11 KV disc fitting for weasel

11 KV Polymer Pin Insulator with Pin (N&B)

Earth wire clamps With N&B

PG Clamps for Dog

11 KV TPMO complete ( complete galavanized)

G.S. Stay set GI 1800x16 mm comp.

Stay wire 7/10

MS Earthing rod 20x2500mm

GI Wire 6 SWG

11 KV lightening arrestor

11 KV fuse set omplete.

M.S. Bolt & Nut Off size ( complete galavanized)

P.P. & Clamps for S.T. Pole-sp-23 ( complete galavanized)

Bracing Clamp for ST Pole -sp-23 ( complete galavanized)

Stay clamp for ST Pole -sp-23 ( complete galavanized)

Clamp of required size for holding hdpe pipe for cable supporting angle, ( complete galavanized)

11 KV Danger board with clamp ( complete galavanized)

Number plate for sp-23 ( complete galavanized)

Stone Pad 300x300x75

ACSR Dog conductor

7/16 SWG Earth wire

Erection of pole in mixed soil and excavation of pit including grouting (1:4:8 C:C.) (single pole pole SP-23)

Erection of pole in mixed soil and excavation of pit including grouting (1:4:8 C:C.) (Double pole SP-23)

Erection of pole in mixed soil and excavation of pit including grouting (1:4:8 C:C.) (Four pole SP-23)

Strining of 3 Phase ACSR Dog conductor & earth wire at required tension & sag complete work including laying, rough sagging, final sagging of Dog conductor & earth wire

11 KV Line Material for Guarding Guarding angle 65x65x6 mm,1900 mm long with holding clamp, packing piece, nut & bolts etc.

G.I. Wire No. 6 SWG along the span (For 1 Km. line)

G.I. Wire No. 8 SWG accross the span (For 1 Km. line)

Turn Buckle

Eye Bolt

G.I. Wire No. 16 SWG for binding

Design, fabrication, and installation of a pre-engineered steel shed structure, utilizing prefabricated components for efficient assembly of 14mtrs. X 40 mtrs. The shed will have a clear internal height of 9 meters, ensuring unobstructed space for various applications. The construction will incorporate structural steel framing, high-strength roofing, and wall cladding materials, with provisions for optimal load-bearing, durability, and weather resistance. Installation of ice melting system on the inner side of roof of above pre-engineered steel shed, utilizing suitable technology to prevent ice accumulation and ensure safe, consistent operation during freezing conditions. The system will include heating elements (electric or hydronic, depending on project requirements) embedded or mounted along roof edges, gutters, and drainage pathways to facilitate efficient melting and prevent ice dams. This solution shall be designed to operate automatically or be activated as needed, incorporating thermostatic controls and sensors to detect temperature and moisture levels,along with rail arrangement for movement of power T/F across the yard.with 5 year warranty.including suitable painting, cc work for all structures /equipments.

Cost of Civil work (including foundation, walls, floor, electrical substation building 5mtr x 5 mtr, outdoor yard Gravelling 0.1 mtr etc. as per enclosed UPCL drawing) quantity shall be finalised by DGM (Civil) at the time of award of land and land size 14 mtr. X 40 mtr.

Sign Board 1 No. 6x4 feet (lengh x breadth) made of MS sheet 14 Gauge(1.6mm thickness) with angle suport of (3"x3",6mm) and height of board 6 feet from ground level to bottom of board and length of angle to be buried in the ground 1.50 feet with 1 feet hole pass inside,painting on board ( enamel paint with red oxide base coat)and printing on board (colour printing by Screen printing method)to indicate Name of scheme.

Description of Work / Item(s)

Amount

Annual Maintenance Charges (AMC) of Project for 5 years on per year basis.

Century Infrapower Private Lmited (BID ID -354382)

Shreem Electric Ltd (BID ID -353512)

Century Infrapower Private Lmited (BID ID -354382)

Shreem Electric Ltd (BID ID -353512)

Shreem Electric Ltd (BID ID -353512)

Century Infrapower Private Lmited (BID ID -354382)

Century Infrapower Private Lmited (BID ID -354382)

Shreem Electric Ltd (BID ID -353512)

Century Infrapower Private Lmited (BID ID -354382)

Shreem Electric Ltd (BID ID -353512)