Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.5 LAccepted-AOC H NO 425 WARD NO 4 BAHADURGARH ROAD MOHALLA RAM NAGAR NEAR MAIN GATE JHAJJAR 124103 HARYANA | JHAJJAR | JHAJJAR | HARYANA | 124103 | ₹33.5 L Quoted ₹33.8 L | L1 | Accepted-AOC Lowest Bidder |
| 2 | L2₹34.2 LRejected-Finance 203 B CHAHBAI BAREILLY UP 243001 | BAREILLY | BAREILLY | UP | 243001 | ₹34.2 L | L2 | Rejected-Finance Not Lowest |
| Sl No | Description | Qty | Unit | Nikunj Bansal Govt Contractor L1 | Quality Builders L2 |
|---|---|---|---|---|---|
| 1.00 | Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed. | 435 | Sqm | 27 ₹11,745 | 30 ₹13,050 |
| 2.00 | M&L for rendering 15 mm thick in CM 1:6 on brick masonary wall surfaces or on other than fair faces of brick masonry finished even and smooth witout using extra cement complete all as specified and directed. | 160 | Sqm | 222 ₹35,520 | 230 ₹36,800 |
| 3.00 | M&L for 15mm thick rendering in cement mortar 1:4 to on brick or concrete surface finished even and smoothusing WPC @ 2% by weight of cement complete all as specified and directed.
(Note : Water proofing liquid shall be measured and paid separately) | 240 | Sqm | 280 ₹67,200 | 300 ₹72,000 |
| 4.00 | M&L for rendering 10 mm thick in CM 1:4 as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed. | 85 | Sqm | 198 ₹16,830 | 198 ₹16,830 |
| 5.00 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. | 493.7 | Sqm | 47 ₹23,203.90 | 47 ₹23,203.90 |
| 6.00 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc. complete all as specified and directed. | 10 | 10 Sqm | 350 ₹3,500 | 350 ₹3,500 |
| 7.00 | M&L for non skid-ceramic tiles coloured of size area of each tile exc.0.06 sqm but not exc . 0.11 sqm (300 x 300 mm) X 6mm thick in floors etc, set & jointed in neat cement slurry and pointed in white or colours cement to match over and including 15 mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed | 3.7 | Sqm | 655 ₹2,423.50 | 700 ₹2,590 |
| 8.00 | M&L for coloured highlighter tiles in vertical surface size 350 x 250 x 7 mm/ 350 x 450 x 7mm thick in walls etc, set & jointed in neat cement slurry and pointed in white or colours cement to match the colour of tiles over and including 10mm thick rendring in CM 1:4 complete all as specified and directed. | 230 | Sqm | 1,200 ₹2.8 L | 1,200 ₹2.8 L |
| 9.00 | M&L for vitrified ceramic tiles of dark shade/ Double Charge, 9 to 10 mm thick (square/rectangular) of size 1200 mm x 600 mm as in floors etc. over and including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tiles, complete all as specified and directed. | 240 | Sqm | 2,000 ₹4.8 L | 2,000 ₹4.8 L |
| 10.00 | M&L for vitrified ceramic tiles of dark shade/ Double Charge, 9 to 10 mm thick (square/rectangular) of size 1200 mm x 600 mm as in Dado Skirtin etc. over and including 10 mm thick Backing Coat in CM 1:3 set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tiles, complete all as specified and directed. | 20 | Sqm | 2,000 ₹40,000 | 2,000 ₹40,000 |
Updated dates
Tender Value
₹43.6 L
EMD Value
₹87,200
Closing Date
14 Jan 2026, 6:00 pmClosed
CWE Bareilly
HEADQUARTERS, COMMANDER WORKS ENGINEER, MILITARY ENGINEER SERVICES, STATION ROAD, BAREILLY CANTT, PIN 243001
CA NO.CWE BLYGE E117 OF 2025 2026 SPECIAL REPAIR TO COOK HOUSE and DINNING HALL (BLDG NO P52A) AT RTS and DEPOT HEMPUR UNDER GE EAST BAREILLY
2025_MES_744293_1
8200/B/912/E8
Open Tender
Civil Works
180 days
Hempur
as per NIT
7 documents required · 7 mandatory
₹500
GE (East) Bareilly
₹87,200
Yes
15 Apr 2026
12 Dec 2025
21 Jan 2026
12 Dec 2025
14 Jan 2026
26 Dec 2025
Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15 mm thick in CM 1:6 on brick masonary wall surfaces or on other than fair faces of brick masonry finished even and smooth witout using extra cement complete all as specified and directed.
M&L for 15mm thick rendering in cement mortar 1:4 to on brick or concrete surface finished even and smoothusing WPC @ 2% by weight of cement complete all as specified and directed. (Note : Water proofing liquid shall be measured and paid separately)
M&L for rendering 10 mm thick in CM 1:4 as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc. complete all as specified and directed.
M&L for non skid-ceramic tiles coloured of size area of each tile exc.0.06 sqm but not exc . 0.11 sqm (300 x 300 mm) X 6mm thick in floors etc, set & jointed in neat cement slurry and pointed in white or colours cement to match over and including 15 mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed
M&L for coloured highlighter tiles in vertical surface size 350 x 250 x 7 mm/ 350 x 450 x 7mm thick in walls etc, set & jointed in neat cement slurry and pointed in white or colours cement to match the colour of tiles over and including 10mm thick rendring in CM 1:4 complete all as specified and directed.
M&L for vitrified ceramic tiles of dark shade/ Double Charge, 9 to 10 mm thick (square/rectangular) of size 1200 mm x 600 mm as in floors etc. over and including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tiles, complete all as specified and directed.
M&L for vitrified ceramic tiles of dark shade/ Double Charge, 9 to 10 mm thick (square/rectangular) of size 1200 mm x 600 mm as in Dado Skirtin etc. over and including 10 mm thick Backing Coat in CM 1:3 set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tiles, complete all as specified and directed.
M&L for 18-20 mm thick granite (zed black colur as approved by GE) stone slab machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, round bull nosing edging and polishing as in kitchen platform/ dado/ counter top WHB inculding cutting holes for oval shape/ urinal partitions etc. including 15 mm thick screed bed in cement mortar 1:6 in horizontal or vertical surfaces inclduing grinding the edges half round and polishing complete all as specified and directed
M&L for prepolished machine cut kota stone slab flooring 16 to 18 mm thick over and including 20 mm cement screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified and directed.
Demolition of Concrete is ground floors andy pavings n exc 15 cm thickness (below or above ground level)complete all as specified and directed.
M&L for 25 mm thick PCC 1:2:4 type B0, using 12.5mm graded aggregate as in floors to receive surface of tile complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6 , type C-2 using 40 mm graded stone aggregate as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed .
M&L for 100 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base floor / pavings complete all as specified and directed
M&L for Sand filling under floors or in foundation including watering and consolidation complete all as spd
M&L for cement Concrete coloured interlocking paver blocks shall be factory made with casting in rubber/pvc moulds & compacting on a vibro table assembly and shall be cured in curing tank for atleast 14 days and then air dried before use. The paver block shall be confirming to IS 15658 -2006 of 60mm thickness, M-35 Grade. Approved design, shape, size and colour of top layer complete all as specified and directed.
Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.
M&L for brick work with sub class B old size bricks, straight or curved on plan exc. 6 m mean radius, built in CM 1:6 complete all as specified and directed.
M&L for brick work with subclass B old size bricks, straight or curved on plan and any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.
Taking down Chowkats or frames with shutters (without taking off shutters from the frame) exc 1.50 sqm but n.exc 4.0 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc in CM 1:4 complete all as specified and directed.
Taking down shutter of any description exc. 2 sqm each and removing from site complete all as specified and directed.
S&F 35 mm thick, 2nd class hard wood , glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.20(a) complete all as specified and directed.
S&F factory made 35 mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F 35 mm thick, 2nd class hard wood , glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (with sash-bars), divined in to square, edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., window ventilators etc. are provided with styles and rails as specified in SSR Part-I, 1991, Section-8, clause 8.20(b) complete all as specified and directed.
S&F aluminium alloy powder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5.50mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed (a) Frame 100x44x1.20mm thick with rawl plug (b) Middle/style rail : 85x44x1.20mm thick (c) Bottom/top rail : 114x44x1.20mm thick (d) Aluminium beading : 0.7mm thick (e) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver aluminium stopper, cleat double action floor spring hydraulically regulated made of n.less than 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other part of steel heavy duty (f) Making good of wall surface to match with existing surface complete.
S&F Powder coated aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality, for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.00 mm thick glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame :95x38mm X 1.15 mm thick for three tracks. (ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over.
Per Leaf
Supply and laying with commissioning and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of size 50 sqmm x 3.5 core laid in trenches, passing through pipes, fixed on walls complete including connecting properly by means of thimbles etc complete all as specified and directed.
(iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such aluminium suitable handle with auto interlock cap with suitable size . (vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed.
S&F 150mm size aluminium handles, cast type anodised completed all as specified and directed.
Taking up or down 15 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed.
Taking up or down 20 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed.
S&F Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe, tank cover etc including taking down existing tank complete all as specified and directed.
S&F in repair, Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) complete all as specified and directed.
S&F 15 mm dia steel water tubing galvanized medium grade concealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed.
S&F 20 mm dia steel water tubing, galvanized, medium gradeconcealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed.
S&F in repair light coloured vitreous china counter top oval shape wash basin white available shape as approved of 550mmx400mm (minimun) on new pre-painted brackets excluding taps but including 32 mm bore waste fittings, brass, chromium plated etc complete all as specified and directed.
S&F in repair of fancy type pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shank S&F ly nuts for iron pipe of 15mm bore fancy type complete all as specified and directed.
S&F in repair 15 mm bore dia of fancy type chromium plated Bib tap complete all as specified and directed.
S&F in repair 15 mm bore dia CP brass fancy type stop cock with long shank & as concealed type/ angular type complete all as specified and directed.
S&F in repair stainless steel of AE - SI 316 grade tubular towel ring including apair of CP brass bracket complete all as specified and directed.
S&F in repair 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed.
S&F for PVC (SWR) pipes 110 mm bore of pipe, single socketed in any length with rubber ring joints fixed to walls including taking down old pipe all as specified and directed.
S&F 75mm dia PVC (SWR) pipe and single socketed in any length with rubberring joint laid in trenches or in floor including taking down old pipe all as specified and directed.
S&F for PVC (SWR) bends of 110 mm bore and any radius complete all as specified and directed.
S&F 75 mm bore PVC (SWR) bend in any radius.
S&F in repairs 75 mm size PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.
S&F 75mm bore PVC (SWR) junction (single ‘T’) equal or unequal complete all as specified and directed.
S&F 110mm bore PVC (SWR) junction (single ‘T’) equal or unequal complete all as specified and directed.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
M&L for reinforced cement concrete 1:1.5:3 type A-1 (using 20mm graded stone aggregate) (nominal mix) as in slabs supported on wall,landing, balconies, shelves and like including bonding agent complete all as specified and directed.
M&L form work to chajja, weather shade, troughs and similar items including edges for rough finished surfaces of concrete flat complete all as specified and directed.
M&L form work to edges of concrete flats, treads, breaks in floors window cill, concrete railing opening in conc wall , floor and roof n.exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n.exc 20cm wide for rough finished surfaces of concrete, complete all as specified.
S&F TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia conforming to Fe-410 - 0, complete all as specified.
Dismantling of plain or corrugated Asbestos cement including Nanital or similar pattern roof covering complete all as specified and directed.
S&F in repair 20 mm dia stainless steel 1.0 mm thick fancy type droppery rod with decorative design matching brackets as approved and knobs (lattu) or end bracket as required incl fitting with 80 mm long SS screw with 75 mm long wooden gitty of appropriate c/s in each end & intermediate support complete all as specified and as directed
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws with washers complete all as specified and directed.
M&L for fibre glass reinforced translucent corrugated sheeting 2mm thick with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and directed.
S&F Roof trusses (Framed), trussed, purlins, crane gantries, rails and fastening and heavy brackets framing(Beam, tee, angle, channel or flat section) including distance pieces, cleats, etc. Gde Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden frames/ steel frames complete all as specified and directed.
S&F galvanised steel wire cloth ,0.56 mm nominal dia of wire and average with of aperture 1.18 mm and fixed with galvanised steel wire staples complete all as specified and directed.
S&F in repair galvanised steel wire cloth ,0.56 mm nominal dia of wire and average with of aperture 1.18 mm and fixed with galvanised steel wire staples complete all as specified and directed.
S&F in reapir 18/19mm thick Block boards, grade 2 quality, interior grade, commercial type, and both faces is covered with approved pattern decorative coloured laminate type 1 of 0.9mm thick on both side , and all around side faces is covered with decorative lipping complete prepared as cup board shutter and fixed with wooden frame-work complete all as specified and directed.
Extra for item No 65 above for prelaminated partical board for external teak wood lipping 6mm thick fixed with nails complete all as specified and directed.
M&L in repair for 2nd class hard wood plain fillets, square, rectangular in section, making rebates for fixing prelaminated cupboard shutters clean sawn, secured with nails or brads in sectional area exc 13 & n. exc 25 sq. cm fixed with nails complete all as specified and directed.
S&F in repair Continuous (piano) hinges, mild steel, bright finish or electrogalvanised of width of flaps (when open) in 30mm complete all as specified and directed.
Demoliton of cement concrete of any description & in any position not otherwise specifically p
rovided for and complete all as specified and as directed.
supply Integral water proofing Liquid complete all as specified and directed.
M&L for brushing neat cement slurry with 3.0 kg of cement per square metre complete all as specified and directed.
M&L cement concrete 1:2:4 mix type B-0 (12.5 mm graded stone aggregate) in padding finishing surface of concrete topping even and fair (without using extra cement) of average thickness 40mm in slope as required over roof complete all as specified and directed.
M&L for 10mm thick plastering in CM(1:4) on concrete roof surfaces using water proofing compound @ 3% by weight of cement and finishing the surface even and fair including taking down existing plaster and APP membrane all as specified and directed.Note :- WPC shall be measured and paid separately.
M&L for precast machine pressed cement concrete tiles of size 250x250x20-22mm or 300x300x20-22 mm with grey cement and no pigment, set jointed and pointed in neat cement slurry in floors and cut and polished laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and directed.
M&L for preparation of old decorated surfaces on wall including brooming, scraping down, smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks by applying putty in patches as required and applying one coat of white wash on ceiling complete all as specified and directed.
M&L for preparation of old decorated surfaces on wall including brooming, scraping down, smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks by applying putty in patches as required and applying one coat of white wash on wall complete all as specified and directed.
M&L for complete removal of old decorated surfaces on wall including brooming, scraping down, smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying two coats of OBD on wall complete all as specified and directed.
M&L for complete removal of existing treatment and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.
M&L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed.
M&L for preparation of old wooden based painted surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Taking down carefully copper/ aluminium point wiring ie. light, fan, socket or power/points complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. and making good disturbed surfaces of ceiling, walls, floors, etc complete all as specified and directed.
Taking down main switch / MCB DBs including MCBs etc of any size and making good distrbed surfaces to match with the existing surfaces of walls, floors etc complete all as specified and as directed.
M&L for applying two coats OBD on newly plastered wall surface over including a coat of primer applied including a coat of 1mm thick wall care putty complete all as specified and directed.
M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.
Taking down Geysers and disconnecting water & electric connections, removing to store for keeping in safe custody for BER complete all as specified and directed.
M&L for point wiring using proper colour coding complete all as specified with 1.5 sqmm PVC insulated FRLS unsheathed 1100 volts multistranded copper conductor two single core cable (Red and Black colour) confirming to IS 694:1990 Part-II with and including non metalic rigid PVC Conduit 25mm dia medium grade with all accessories including cutting chases pinning in, for concealed conduit wiring in wall/ceiling/floor/roof etc, making good of disturbed surface not exc 15cm girth, modular sunk pressed steel terminal box not less than 2mm thick, 50mm deep, covered with frame plate with cover for 01 to 16ways suitable for modular fittings including 1.5 sqmm PVC insulated FRLS unsheathed 1100 volts multistranded copper conductor one single core cable (Green colour) confirming to IS 694:1990 Part-II as continuous earth wire connected to common earth dolly all as specified and as directed for the following:- (a) One light/fan/exhaust fan/bell point controlled by one modular switch/bell push.
Taking down Ceiling fan/Exhaust fan, sealing cable end,dismantling blades and removing fan and blades to store for keeping in safe custody for BER Board complete all as specified and directed.
Taking down sub main wiring /service cable including earth wire and making good disturbed surfaces to match with the existing surfaces of walls, floors complete all as specified and directed.
All as per above Sch "A" Item No. 90 but one 3 pin modular socket outlet 5 Amp on the same board with other switch complete all as specified and directed.
M&L for modular switch, 1 way 6 Amp, 1 module complete all as specified and directed.
M&L for modular switch, 1 way 16 Amp, 1 module complete all as specified and directed.
S&F modular socket 6Amp, 2/3 pin, combined 2 module complete all as specified and directed.
S&F modular socket 6A/16A, 2/3 pin combined 2 module complete all as specified and directed.
All as per above Sch "A" Item No. 90 one 3 pin modular socket outlet 5 Amp independent board complete all as specified and directed.
S&F ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body of size complete all as specified and directed.
S&F lamp holder (Batten/Angle) PVC/Polycarbonate type with back plate for batten/angle fittings, complete all as specified and directed.
S&F for Lamp LED ADORE PLUS 1 x 9 Watts, CDL, 3 Star rating, heat sink white with Polycarbonate diffuser, B-22 base cap, retrofit type, 220/230 volts, complete all as specified and directed.
S&F LED lights fitting 1x 20 Watts (T-8), 4 feet long, 220V, AC, decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, prewired complete with two Nos of PVC box of size 75x75x20mm for mounting light fittings complete all as specified and directed.
S&F LED light fitting 1x9W/1X10W Bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size with LED Lamp 1 X 9/10watts, complete all as specified and directed.
All as per above Sch "A" Item No. 90 but one 3 pin socket outlet 15 Amp independent board with 2.5 sqmm PVC insulated FRLS unsheathed 1100 volts multistranded copper conductor single core cable (Red, Black and green colour) confirming to IS 694:1990 Part-II complete all as specified and directed.
M&L for modular stepped type fan regulator, 120Watts - 2 module complete all as specified and directed.
S&F decorative wall light fixture made up of Polycarbonate, suitable for 1 x 9 Watts, retrofit LED lamp, B22 base, CITY-2, 220 Volts, AC, complete all as specified and directed.
S&F in replacement of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V, AC, Recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.
M&L for sub main wiring with two run of single core PVC insulated unsheathed FRLS copper conductor cable 1100 volt grade multistandard of size 6.0 sqmm (Red and Black colour) and incl drawn through Rigid non-metallic PVC conduit 25mm dia (ISI Marks) including accesssories, one run of single core PVC insulated unsheathed FRLS copper conductor cable 1100 volt grade multistandard of size 6.0 sqmm (green colour) for earth continuity wire and connected of common earth dolly complete all as specified and directed. Note:- One run of Rigid non-metallic PVC conduit 25mm dia, three run of 6.0 sq mm copper conductor cable is measured as one unit.
M&L for sub main wiring with two run of single core PVC insulated unsheathed FRLS copper conductor cable 1100 volt grade multistandard of size 4.0 sqmm (Red and Black colour) and incl drawn through Rigid non-metallic PVC conduit 25mm dia (ISI Marks) including accesssories, one run of single core PVC insulated unsheathed FRLS copper conductor cable 1100 volt grade multistanda
rd of size 4.0 sqmm (green colour) for earth continuity wire and connected of common earth dolly complete all as specified and directed. Note:- One run of Rigid non-metallic PVC conduit 25mm dia, three run of 4.0 sq mm copper conductor cable is measured as one unit.
S&F in replacement of wall mounting fans 230 volts. single phase, 50 Hz, 1450 RPM, Oscillating 400 mm sweep suitable for wall mounting, made of metal body, Copper winding including connecting up with three core flexible copper conductor cable for suitable size and wall mounting fastener bolt, nuts & washers etc, complete all as specified and directed.
S&F sheet metal enclosure 20Amp SP (2P+E) with Metal plug and socket DBs suitable for protection of appliances like AC/Geysers etc complete with one MCB single pole 20Amps, 240Volts including connection, testing and making good the disturbed surfaces, complete all as specified and directed.
S&F sheet metal enclosures MCB SPN DBs 4 Way, 240 Volts, 50Hz, AC, double door suitable for flush mounting and surface mounting with 200 Amp copper bus bar for phase, including connection, testing and making good the disturbed surfaces complete all as specified and directed.
S&F sheet metal enclosures MCB SPN DBs 8 Way, 240 Volts, 50Hz, AC, double door suitable for flush mounting and surface mounting with 200 Amp copper bus bar for phase, including connection, testing and making good the disturbed surfaces complete all as specified and directed.
S&F sheet metal enclosures MCB TPN DBs 6 Way, 240 Volts, 50Hz, AC, double door suitable for flush mounting and surface mounting with 200 Amp copper bus bar for phase, including connection, testing and making good the disturbed surfaces complete all as specified and directed.
S&F in replacement of LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
S&F ceiling fan 1200mm sweep, complete with blades, down rods and accessories, 230 V, Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including connecting up with three core flexible copper conductor cable for suitable size, complete all as specified and directed.
S&F miniature circuit breaker (MCB), Single Pole & Neutral 40 to 63 Amp, rating 240V, 10 KA current carrying capacity, 'C' curve fixing in the MCB DB complete with connection testing and commissioning, complete all as specified and directed.
S&F miniature circuit breaker (MCB), Single Pole 6 to 32 Amp, rating 240V, 10 KA current carrying capacity, 'B' curve fixing in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
Taking down old service connection/ UG Cable removing of site complete all as specified and directed.
S&F heavy duty exhaust fan 450mm sweep, made of metal body complete with louvers shutter, voltage 230V, 50 Hz, 1200 RPM, Copper winding including connecting up with three core flexible copper conductor cable for suitable size and wall mounting fastener bolt, nuts & washers etc, complete all as specified and directed.
Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth for laying of electric cables or water pipe etc, not exc 10 sqmm on plan and not exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. Note : Rates includes removing of paver blocks carefully and stack properly for refixing after laying of cables .
Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
M&L for river washed and screened, dry sand for cushioning of cable in trenches for cable protection including spreading, leveling and hand punning complete all as specified in SSR Part-I complete all as specified and directed. Note :- Only compacted thickness of sand will be measured and paid separately.
Supply, laying un-reinforced precast concrete cable cover class LV type 1 flat size 250mm x 150 mmx 40 mm complete all as specified and directed.
M&L for Horizontal directional drilling (HDD) is a streeable trenchless method of Laying (installing) underground cables in a shallow arc along a 40mm/ 50mm bore path by using a surface-launched drilling rig, with minimal impact on the sorrounding area complete all as specified and directed.
M&L for GI pipe, light grade 40mm dia for road crossing of cable for cable protection laid in trenches or above ground surface complete all as specified and directed.
M&L for earthing complete with galvanized iron earth plate electrode 600 x600x6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.6 meter below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts check nuts galvanized iron or steel all as shown in Electrical plate No. 3 of SSR PT- I testing on completion with & incl. 15 mm bore light grade GI protection pipe 7.5 mtr long for earth lead, PCC (1:3:6) pit with pre cast RCC (1:2:4) type B1 cover slab with one handle made out of 8mm dia round bar, watering arrangement with funnel, wire mesh 20 mm bore light grade GI pipe, common salt & charcoal alternative layers, necessary excavation earth work, including earthing test point all as specified or indicated including testing on completion and directed.
stage.html
html • 0.04 MB
technical_833422.pdf
techsummary_833422.pdf
finance_833422.pdf
BOQ Comparative Chart
xlsx
finsummary_833422.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.40 MB
BOQ_833422.xls
BOQ • 0.40 MB
TD117.pdf
Tender Documents • 2.67 MB
Download all tender documents and submit your bid