GENERAL-Urgent Repairs and maintenance of Thaluk office building Chavakkad-Work General Civil work

Amount

Repairs to Building

2.31:Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared

15.31:Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

od45437/2020_2021/BL:Roofing with dept.MP tiles including labour charges etc complete

od45438/2020_2021/BL:Supplying and stacking MP tiles including all cost and conveyance charges etc complete

od45439/2020_2021/BL:Setting dept.MP hip and ridge tiles in lime mortar 1:2 including finishing edges including all cost of materials ,labour charges etc complete.

50.9.13.1:Supplying and fixing Anjily wood wrought and put up for roof members including cost and conveyance of materials etc. complete .

od45440/2020_2021/BL:Supplying MP hip and ridge tiles including cost and conveyance charges etc. complete

od45441/2020_2021/BL:Oiling with waste oil two coat to the members including all cost and materials,conveyance,labour charges etc.complete

14.54.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work

od45446/2020_2021/BL:Engaging plumber for plumbing works

od45447/2020_2021/BL:supplying and fixing 15mmc.p.long body tap

od45448/2020_2021/BL:Supplying and fixing 20 mm Angle cock (medium) of best quality

50.9.15.5:Providing and fixing iron hooks and eyes: 100 mm

15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet

15.28.2:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :Asbestos Sheet

od45450/2020_2021/BL:Engaging Wood cutter for helping to cutting the branches of trees.

od45451/2020_2021/BL:Engaging Carpenter Gr.2 for repairing doors and windows

14.40.2:Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete.100x70x4 mm (ordinary type)

12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

OD137936/2021-2022:Ridge caping with pre painted galvenised steel sheets 0.5 mm thick 60 cm wide including all cost and materials, conveyance, labour charges etc. complete.

50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

14.43:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

14.53.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

OD138014/2021-2022:Removing existing enamel paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to metal surfaces etc. complete.

13.50.3:Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron /steel works

13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

OD241752/2022-2023:Engaging coolies

MOHAMMED MUTHU IBRAHIM

SANTHOSH JACK

Binuraj

Bidder Name

SANTHOSH JACK

N R VARGHESE

Binuraj

MOHAMMED MUTHU IBRAHIM