Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹88.4 LAccepted-AOC 1503 SECTOR 9 AMBALA CITY HARYANA | AMBALA | HARYANA | 134003 | L1 | Accepted-AOC L1 | |
| 2 | L2₹1.0 Cr+₹13.1 L (14.9%)Rejected-Finance E 602 HETTAGE MAX SECTOR 102 GURUGRAM 122001 | GURUGRAM | GURUGRAM | HARYANA | 122001 | L2 | Rejected-Finance HIGHER | |
| 3 | L3₹1.0 Cr+₹14.9 L (16.8%)Rejected-Finance SONIPAT HARYANA HR | L3 | Rejected-Finance HIGHER | |
| 4 | L4₹1.0 Cr+₹15.7 L (17.7%)Rejected-Finance WARD NO 7 SAMPLA ROAD DELHI ROAD KHARKHODA 131402 | SONIPAT | HARYANA | 131402 | L4 | Rejected-Finance HIGHER | |
| 5 | L5₹1.1 Cr+₹16.8 L (19.0%)Rejected-Finance | L5 | Rejected-Finance HIGHER |
| Sl No | Description | Qty | Unit | BRIJ MOHAN CONTRACTOR L9 | Sh. Rajpal Dahiya L2 | SIKENDER SHARMA CONTRACTOR L5 | Anand Contractor L6 | Satish Kumar Gupta L1 | Anil Kumar Contractor L8 | The Shiv Shakti Cooperative L/C Society L3 | M/S DDR Buildtech L7 | M/S B & P INFRATECH L4 | ANTIL ENTERPRISES L11 | S.K.TRADING CO. L10 | M/s Sachin Bansal Contractor L12 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Providing and fixing of tile ( Khaprail ) size 6 inch x 6 inch x 1/2 inch design laid on 40mm thick bed of cement coarse sand mortar 1:3 with neat cement slurry, mixed with pigment to match the shade of tile between joint over the base on top of rain shelter as per design/drawing complete in all respect up to entire satisfaction of Engineer in charge. | 128 | Sqm | 30 ₹3,840 Lowest | 700 ₹89,600 | 564.3 ₹72,230.4 | 627 ₹80,256 | 400 ₹51,200 | 655 ₹83,840 | 700 ₹89,600 | 627 ₹80,256 | 680 ₹87,040 | 626 ₹80,128 | 624 ₹79,872 | 627 ₹80,256 |
| 2.00 | Analysis of rate for installation of submersible of having 60mtr depth , 100mm dia pipe , 1.5 HP submersible pump and all accessories as per direction of Engineer in charge | 2 | Each | 55,000 ₹1,10,000 | 50,000 ₹1,00,000 | 60,300 ₹1,20,600 | 6,700 ₹13,400 Lowest | 80,000 ₹1,60,000 | 70,000 ₹1,40,000 | 65,000 ₹1,30,000 | 6,700 ₹13,400 Lowest | 1,00,000 ₹2,00,000 | 67,000 ₹1,34,000 | 67,000 ₹1,34,000 | 6,700 ₹13,400 Lowest |
| 3.00 | Supply of one LED Bollard light of Mashroom / Polo Shape having following specifications :
Height 600mm , Diameter 150mm , Product weight of approx 1.2-1.5kg, Body material : Die Cast Aluminum, Color : Black or Grey, Workable in Temperature Range of -10 to 50 Degree, Life span of approx 50000 Hrs, IP rating IP 65 , Wattage : 9W , Over voltage protection, Thermal protection, Beam Angle 95 degree ,
Complete in all respect to full satisfaction of Engineer-in-chief. | 222 | Each | 5 ₹1,110 Lowest | 5,000 ₹11,10,000 | 5,587.2 ₹12,40,358.4 | 6,208 ₹13,78,176 | 2,500 ₹5,55,000 | 6,500 ₹14,43,000 | 5,800 ₹12,87,600 | 6,208 ₹13,78,176 | 5,000 ₹11,10,000 | 6,208 ₹13,78,176 | 6,208 ₹13,78,176 | 6,208 ₹13,78,176 |
| 4.00 | Supply and erection of PVC insulated and sheathed 16 sqmm underground cable, in existing pipe or trenches 1100 volts core having solid aluminium conductor wires confirming to IS: 694:2010, including making necessary connections complete in all respect up to entire satisfaction of the Engineer-in-Charge of the work. | 1,784 | Metre | 200 ₹3,56,800 | 250 ₹4,46,000 | 180 ₹3,21,120 | 200 ₹3,56,800 | 250 ₹4,46,000 | 210 ₹3,74,640 | 200 ₹3,56,800 | 200 ₹3,56,800 | 130 ₹2,31,920 Lowest | 200 ₹3,56,800 | 200 ₹3,56,800 | 200 ₹3,56,800 |
| 5.00 | Supply and erection of FRLS PVC insulated and round sheathed 2.5 Sqmm 3 core, bright annealed copper conductor heavy duty industrial flexible cable for voltage grade 1100 volts confirming to IS: 694:2010 complete in all respect up to entire satisfaction of the Engineer-in-Charge of the work. | 674 | Metre | 170 ₹1,14,580 | 200 ₹1,34,800 | 117 ₹78,858 Lowest | 130 ₹87,620 | 400 ₹2,69,600 | 136 ₹91,664 | 130 ₹87,620 | 130 ₹87,620 | 120 ₹80,880 | 130 ₹87,620 | 130 ₹87,620 | 130 ₹87,620 |
| 6.00 | Air Walker: Providing, designing and fixing of Air-Walker of size 100 x 550 x 1480mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick made up of hot rolled tubular steel and hot dipped galvanized, and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Base plate cover shall be made up of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness U V resistant and colour as approved by Engineer-in Charge. High quality grip rubber should be used on handles. Foothold shall be made of Nylon alloy with rounded edge to prevent impact and injury. Maintenance free bearing should be used in equipment manufactured by reputed company duly sealed and self lubricated to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters . The equipment should be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. | 2 | Each | 27,000 ₹54,000 | 26,000 ₹52,000 | 26,010 ₹52,020 | 28,700 ₹57,400 | 8,000 ₹16,000 Lowest | 30,200 ₹60,400 | 25,200 ₹50,400 | 28,900 ₹57,800 | 28,000 ₹56,000 | 28,900 ₹57,800 | 28,900 ₹57,800 | 28,900 ₹57,800 |
| 7.00 | Sit Up Station: Providing, designing and fixing of double sit-up station of size 1500 x 1150 x 650 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Seat and Base plate cover shall be made up of virgin LLDPE plastic by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. The equipment should be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and when concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. | 2 | Each | 27,000 ₹54,000 | 26,000 ₹52,000 | 26,010 ₹52,020 | 28,700 ₹57,400 | 7,500 ₹15,000 Lowest | 30,200 ₹60,400 | 25,200 ₹50,400 | 28,900 ₹57,800 | 29,000 ₹58,000 | 28,900 ₹57,800 | 28,900 ₹57,800 | 28,900 ₹57,800 |
| 8.00 | Air Swing: Providing, designing and fixing of airs winging pair of size 1150 x900 x1250 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Seat and Base plate cover shall be made up of virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintained free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc | 2 | Each | 22,000 ₹44,000 | 26,000 ₹52,000 | 26,010 ₹52,020 | 28,700 ₹57,400 | 7,500 ₹15,000 Lowest | 30,200 ₹60,400 | 25,200 ₹50,400 | 28,900 ₹57,800 | 31,000 ₹62,000 | 28,900 ₹57,800 | 28,900 ₹57,800 | 28,900 ₹57,800 |
| 9.00 | Pull Chair: Providing, designing and fixing of Pull pair of size 2500 X 800 X 2000 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc | 2 | Each | 27,000 ₹54,000 | 26,000 ₹52,000 | 26,010 ₹52,020 | 28,700 ₹57,400 | 6,500 ₹13,000 Lowest | 30,200 ₹60,400 | 25,200 ₹50,400 | 28,900 ₹57,800 | 25,000 ₹50,000 | 28,900 ₹57,800 | 28,900 ₹57,800 | 28,900 ₹57,800 |
| 10.00 | Arm Wheel :- Providing, designing and fixing Arm Wheel in a pair of size 850 X 800 X 1800 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc | 2 | Each | 27,000 ₹54,000 | 26,000 ₹52,000 | 26,010 ₹52,020 | 28,700 ₹57,400 | 6,500 ₹13,000 Lowest | 30,200 ₹60,400 | 25,200 ₹50,400 | 28,900 ₹57,800 | 22,000 ₹44,000 | 28,900 ₹57,800 | 28,900 ₹57,800 | 28,900 ₹57,800 |
Tender Value
₹1.1 Cr
EMD Value
₹2.6 L
Closing Date
25 Apr 2025, 9:00 amClosed
AJAY NIRALA
Muncipal Corporation Sonipat
Construction of Boundary Wall and Footpath
2025_HRY_440512_1
202545C50F87 3B75 4934 AE4B 95A2E84811D9292ULB
Open Tender
Civil Works
Works
365 days
Sonepat
2 documents required · 2 mandatory
₹15,000
₹2.6 L
Yes
14 Oct 2025
15 Apr 2025
25 Apr 2025
15 Apr 2025
25 Apr 2025
15 Apr 2025
Amount
Providing and fixing of tile ( Khaprail ) size 6 inch x 6 inch x 1/2 inch design laid on 40mm thick bed of cement coarse sand mortar 1:3 with neat cement slurry, mixed with pigment to match the shade of tile between joint over the base on top of rain shelter as per design/drawing complete in all respect up to entire satisfaction of Engineer in charge.
Analysis of rate for installation of submersible of having 60mtr depth , 100mm dia pipe , 1.5 HP submersible pump and all accessories as per direction of Engineer in charge
Supply of one LED Bollard light of Mashroom / Polo Shape having following specifications : Height 600mm , Diameter 150mm , Product weight of approx 1.2-1.5kg, Body material : Die Cast Aluminum, Color : Black or Grey, Workable in Temperature Range of -10 to 50 Degree, Life span of approx 50000 Hrs, IP rating IP 65 , Wattage : 9W , Over voltage protection, Thermal protection, Beam Angle 95 degree , Complete in all respect to full satisfaction of Engineer-in-chief.
Supply and erection of PVC insulated and sheathed 16 sqmm underground cable, in existing pipe or trenches 1100 volts core having solid aluminium conductor wires confirming to IS: 694:2010, including making necessary connections complete in all respect up to entire satisfaction of the Engineer-in-Charge of the work.
Supply and erection of FRLS PVC insulated and round sheathed 2.5 Sqmm 3 core, bright annealed copper conductor heavy duty industrial flexible cable for voltage grade 1100 volts confirming to IS: 694:2010 complete in all respect up to entire satisfaction of the Engineer-in-Charge of the work.
Air Walker: Providing, designing and fixing of Air-Walker of size 100 x 550 x 1480mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick made up of hot rolled tubular steel and hot dipped galvanized, and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Base plate cover shall be made up of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness U V resistant and colour as approved by Engineer-in Charge. High quality grip rubber should be used on handles. Foothold shall be made of Nylon alloy with rounded edge to prevent impact and injury. Maintenance free bearing should be used in equipment manufactured by reputed company duly sealed and self lubricated to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters . The equipment should be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc.
Sit Up Station: Providing, designing and fixing of double sit-up station of size 1500 x 1150 x 650 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Seat and Base plate cover shall be made up of virgin LLDPE plastic by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. The equipment should be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and when concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc.
Air Swing: Providing, designing and fixing of airs winging pair of size 1150 x900 x1250 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Seat and Base plate cover shall be made up of virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintained free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc
Pull Chair: Providing, designing and fixing of Pull pair of size 2500 X 800 X 2000 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc
Arm Wheel :- Providing, designing and fixing Arm Wheel in a pair of size 850 X 800 X 1800 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc
Elliptical Exerciser :- Providing, designing and fixing Elliptical Exerciser of size 1200 X 540 X 1600 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc
Double Cross Walker :- Providing, designing and fixing Double Cross Walker of size 1600 X 600 X 1600 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc
Seated Chest Press :- Providing, designing and fixing Seated Chest Press of Pull pair of size 1800 X 700 X 2000 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc
Providing and fixing of MS Sheet of 16 Gauge Complete in all respect to full satisfaction of Engineer-in-chief.
Supplying Volley Ball Pole Structure made of MS ISI Mark tubing two outer pole outer dia 88mm with wall thickness of 4.5mm inner pole OD 74.50mm Wall Thickness of 4.0mm Chromium plated with arrangement of holding the net wire heavy duty (Detachable/In grout) with Inbuilt height Adjustment/net wire tightening mechanism, Both with the help of a single key, properly padded, The height adjustment mechanism base on rack and pinion gear system for accuracy in adjusting the height. All system is concealed inside the poles as dust free environment for longevity. All System as per International Standard including Volleyball Net Sportiva Tournament
Bidder Name
Amount
BRIJ MOHAN CONTRACTOR (GSTN-NA) BID ID -1245070
Sh. Rajpal Dahiya (GSTN-06AAOPD6073EIZT) BID ID -1248642
SIKENDER SHARMA CONTRACTOR (GSTN-06BTPPK7055J1Z6) BID ID -1247621
Anand Contractor (GSTN-NA) BID ID -1247580
Satish Kumar Gupta (GSTN-NA) BID ID -1248649
Anil Kumar Contractor (GSTN-NA) BID ID -1246933
The Shiv Shakti Cooperative L/C Society (GSTN-NA) BID ID -1248590
M/S DDR Buildtech (GSTN-NA) BID ID -1247050
M/S B & P INFRATECH (GSTN-NA) BID ID -1247995
ANTIL ENTERPRISES (GSTN-NA) BID ID -1248519
S.K.TRADING CO. (GSTN-NA) BID ID -1248533
M/s Sachin Bansal Contractor (GSTN-NA) BID ID -1248619
Satish Kumar Gupta (BID ID -1248649)
M/S B & P INFRATECH (BID ID -1247995)
SIKENDER SHARMA CONTRACTOR (BID ID -1247621)
Anand Contractor (BID ID -1247580)
M/S DDR Buildtech (BID ID -1247050)
M/s Sachin Bansal Contractor (BID ID -1248619)
The Shiv Shakti Cooperative L/C Society (BID ID -1248590)
S.K.TRADING CO. (BID ID -1248533)
ANTIL ENTERPRISES (BID ID -1248519)
Sh. Rajpal Dahiya (BID ID -1248642)
Anil Kumar Contractor (BID ID -1246933)
Sh. Rajpal Dahiya (BID ID -1248642)
The Shiv Shakti Cooperative L/C Society (BID ID -1248590)
M/S B & P INFRATECH (BID ID -1247995)
SIKENDER SHARMA CONTRACTOR (BID ID -1247621)
Anand Contractor (BID ID -1247580)
M/S DDR Buildtech (BID ID -1247050)
Anil Kumar Contractor (BID ID -1246933)
BRIJ MOHAN CONTRACTOR (BID ID -1245070)
S.K.TRADING CO. (BID ID -1248533)
ANTIL ENTERPRISES (BID ID -1248519)
M/s Sachin Bansal Contractor (BID ID -1248619)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .