Special repair and maintenance of E.O. residence at Rait, Distt. Kangra (HP).

Amount

Scarifying of old cement plaster including disposal of unserviceable material within all leads and lifts including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Taking out doors, windows and clerestory windows shutters (steel or wood) including stacking with in all leads and lifts including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. .

Demolition of rubble masonary in cement mortar above G.L. upto all floor level including stacking of serviceable materials and disposal of un-serviceable materials within all leads and lifts rubble masonary in cement mortar including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. .

Full Brick work using common clay burnt building bricks in super structure above plinth level upto all heights with in cement mortar 1:6 (1 cement :6 sand) 1st class bricks including carriage of material within all leads and lift including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. .

Half Brick work using common clay burnt building bricks in super structure above plinth level upto all heights with in cement mortar 1:6 (1 cement :6 sand) Ist class bricks including carriage of material within all leads and lift including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing from work with steel plates 3.15mm thick weled with angle iron in frame 30X30X5mm so as to give a fair finish including levelling, centering, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor two ceiling and removal of the same (a)Flat surfaces such as soffits or suspended floors, roofs,landings and the like floor etc. including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. .

Providing and laying cement concrete work 1:1.5:3 (1cement:1.5sand:3graded stone agregate 20mm nominal size ) and curring complete excluding cost of form work and reinforcement for reinforced concrete work in :- a) Suspended floors, roofs, landings and their supports, balconies, beams, girders, bressumers upto all floor level including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. .

Providing TOR steel reinforcement for RCC work including bending binding and placing in position in all heights including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Demolition of Un-reinforecd cement concrete below G.L. upto all depth and disposal of unserviceable materials within all leads and lifts including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. .

Providing and laying cement conrete 1:6:12(1cement:6sand: 12graded stone aggregate 40mm nominal size) and curring complete exculding cost of form work in foundation and plinth Un-reinforecd cement concrete including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. .

Providing and laying stain and impact resistant double charged vitrified tiles Nitco or equivalent 600x600x10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material within all leads and lift.

Providing and laying spartic ceremic tiles 5.5 mm thick in flooring (300x300mm size) treads or steps laid on abed of 12mm thick cement mortar 1:3(1cement:3sand) finished with flush pointing in white cement including carriage of material within all leads and lift.

Providing and laying coloured Digital wall tiles 6mm thick in skirting risers or steps and dado on 12mm thick cement plaster 1:3(1cement:3sand) and jointed with white cement slurry including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. .

Providing and laying granite stone in flooring 20mm (avg) thickness base of cement mortar 1:3 (1 cement :3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. 20 mm thick including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. .

6mm cement plaster to ceiling in cement mortar 1:4(1cement:4sand) including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. .

15mm cement plaster in singal coat on the rough/fair side of brick/concrete/stone walls for interior plastring upto floor two level including arrrises, internal rounded angles, chamfers and/or rounded angle not exceeding 80mm in girth and finished evehn and smooth in cement mortar 1:6(1cement :6sand) including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Distempering (two coats) with oil boud washable distemper of approved brand and manufacture and of required shade on decorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after throughly brushing the surface free from mortar dropping and other foreign matter and aslo including preparing the surface even and sand papered smooth priming coat with distemper primer including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Finishing wall with water proofing cement paint Apex of Asian brand and manufacture and required shade on decorated wall surfaces (two coats) to give an even shade after throughly brushing the surface to remvoe all dirt and remains os loose powdered materials including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Applying birla white wall care putty (two coat) over plaster surface after throughly brushing the surface free from mortar drops, dust, loose materilas and other foreign matters and papered smooth to give final matter finish to the surface complete including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fxing dyed aluminium work for door, windows, ventilators and partitions with extruded built up standard tubular and other sections to of approved make . conforming to 733 and IS 1285 anodised transparent or dyed & Powder coated aluminium (minimum thickness of powder coating 50 micron) fixed with rawplugs and screws or with fixing clips, or with expansion hold fastners i/c necessary filling up of gaps at junctions , at top , bottom and sides with required PVC/ Neoprene felt etc. aluminium sections shall be smooth ,rustfree ,straight ,mitred and jointed mechanically where ever required i/c cleat angle, aluminium ,snap beading for glazing /panelling C.P. brass/ stainless steel screws .All complete as per Architectural drawing and the directions of Enginner in charge. a) For doors windows and ventilators and glazed partitions frames including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

b) For shutters of doors windows & ventilators including providing and fixing hinges/pivots and making provisions for fixing of fittings where ever required including the cost of PVC /neoprene gaskets as required .(fittings and glazing /panelling shall be paid for separately) including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing stainless wire gauge of IS gauge designation 85G with wire of .56mm to windows and clearstory window including aluminium beading & carriage of material within all leads and lift including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing glazing in aluminium door ,windows ,ventilators shutters and partition etc with PVC/ neoprens gaskets etc. Complete as per the architectural drawings and the direction of Engineer including aluminium snap beading and glazing. Glazing with glass panes of 5.50mm thickness(weight not less than 13.75 kg/sqm.) including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing prelaminated board boiled water proof(BWP) phenol bonded exterior /interior grade 12 mm thick including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing aluminium composite panel sheet 3mm thick with required PVC/neoprens gaskets etc.in all respect including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing aluminium sliding door blot dyed to required colour and shade with bolts and nuts screws etc.complete 250mm x16mm including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing aluminium tower bolts(barrel type) anodized transparent or tyed to required shade and colour with screws etcs.complete including carriage of material within all leads and lift. 150x10mm

Providing and fixing aluminium handles dyed to required colour or shade with necessary screws etc.complete including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. (a)200 mm

Providing and fixing 150mm bright finished brass floor door stopper with rubber cushion,screws etc.to suit shutter thickness complete including carriage of material within all leads and lift.

Providing and fixing M.S.Hooks and eyes.150mm including carriage of material within all leads and lift.

Steel work welded in built up sections,trusses and framed work including cutting,hoistingm,fixing in position and applying a priming coat of read lead paint in gratings framed guard bars,ladders,railing brackets including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter with prepainted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-Charge including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing ridges or hips 60cm over all with 0.60mm thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron j or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing & fixing M.S. BP sheet 1.66mm to 2mm thick in eaves board / facia / soffits / ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge (Base members of steel work shall be measured & paid separately) including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Painting two coats(excluding priming coat)on steel and other metal surfaces with enamel paint,brushing to give an even shade including cleaning the surface of all dirt,dust and other foreign matter.Enamel paint other than white including carriage of material within all leads and lift.

Excavation in foundation, trenches etc. In earth work in all kind of soil lifts. Stacking the excavated soil not more than 3 mtrs. Clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths sides of foundation ect. consolidating all surplus excavated earth as directed upto all leads and liftsdisposed earth to be levelled neatly dressed including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and laying interlocking paver tiles 60mm thick (ISI Marked) as per technical specification clause 1504 including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 nominal mix 1:3:6 ( 1 cement 3 Sand : 6 crushed graded stone aggregate 20mm nominal size) in walls including cost of formwork and including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing high pressure PVC spigot and socket waste and ventilating pipes ISI marked working pressure notless than 6.5kg/Sqm i/c fixing with approved adhesive etc. complete. 110mm diameter including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing on wall face PVC accessories rain water pipes including filling the joints with approved adhesive complete 110mm diameter including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. (a) Plain bend

plain tee

door bend

door tee

Providing and fixing to wall ceilling and floor cpvc tube fittings and clamps including making good the wall ceilling and floor 20 mm nominal bore.

Providing and fixing PVC floor trap ISI marked of self cleaning design i/c fixing with approved adhessive cost of cutting and making good the wall and floors etc. 110mm x 90mm including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing vitreous china wash down water closet (European type WC pan)with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement:1sand) (Seat and coverto be measured and paid for separetly) including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing 10.00/12.50/15.00 ltrs PVC low level flushing cistern with apair of CI ormild steel brackets complete with fittings including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing GI inlet connection for flush pipe with WC pan including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing plastic seat(Solid/Hollow type) and cover for wash down water closet with C.P. brass hinges and rubber buffers:- Solid type white plastic seat and cover including carriage of material within all leads and lift.

Providing and fixing jet for WC seat including carriage of material within all leads and lift.

Providing and fixing vitreous china wash basin with single hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fittings.Flat back630x450mm including carriage of material within all leads and lift.

Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P.waste with C.I.or M.S.brackets painted white i/c cutting hole and making good the same excluding fittings size 610x410x200mm.

Poviding and fixng vitrous china pedestal for wash basin complete recessed at the back for reception of pipe and fittings as per direction of Engineer-in- Chargeincluding carriage of material within all leads and lift.

Providing and fixing CP brass waste for wash basin or sink 32 mm dia including carriage of material within all leads and lift.

Providing and fixing PVC waste pipe for wash basin or sink 32 mm dia as per direction of Engineer-in- Chargeincluding carriage of material within all leads and lift.

Providing and fixing 100m sand cast iron grating for gully,foor or Nahani trap as per direction of Engineer-in- Charge including carriage of material within all leads and lift.

Providing and fixing 600x450mm bevelled edge mirror of superior glass mounted on 6 mm thick AC sheet or plywood sheet and fixed to wooden plugs with CP brass screw and washers as per direction of Engineer-in- Charge including carriage of material within all leads and lift.

Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden pluges with CP brass screws 600x20mm.

Providing and fixing CP brass bib tap with capastan head 15 mm dia as per direction of Engineer-in- Charge including carriage of material within all leads and lift.

Providing and fixing CP brass pillar tap with capstan head 15 mm dia as per direction of Engineer-in- Charge including carriage of material within all leads and lift.

Providing and fixing mixer for kitchen sink with casted swing spot at top as per direction of Engineer-in- Charge including carriage of material within all leads and lift.

Providing and fixing one hole basin mxing faucent as per direction of Engineer-in- Chargeincluding carriage of material within all leads and lift.

Providing and fixing mixer facucent for shower and bath shower as per direction of Engineer-in- Charge including carriage of material within all leads and lift.

Providing and fixing bath shower as per direction of Engineer-in- Charge including carriage of material within all leads and lift.

Providing and fixing CP stop cock 15mm dia as per direction of Engineer-in- Charge including carriage of material within all leads and lift.

Providing and fixing PVC connection pipe with brass unions 30 cms length 15mm nominal size including carriage of material within all leads and lift.

Providing and fixing brass full way valve with wheel 20mm nominal size including carriage of material within all leads and lift.

Providing and fixing GI or MI union 20 mm nominal size including carriage of material within all leads and lift.

Providing and fixing charomium plated brass soap dish with C.P.brass brackets fixed to wooden cleats with C.P. brass screws as per direction of Engineer-in- Charge. including carriage of material within all leads and lift.

Providing and fixing PVC water storage tank of ISI - 12701 marked GI inlet and outlet connection 15mm nominal bore Ball valve and mosquito proof PVC cover with locking arrangement i/c hoisting upto all height above Ground level (Double core)1000 ltrs capacity as per direction of Engineer-in- Charge including carriage of material within all leads and lift.

karnail singh

pooja devi

Shubham Balouria

akshay sharma government contractor

VIJAY KUMAR BATRA GOVT CONTRACTOR