Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹3.3 Cr
EMD Value
₹3.3 L
Closing Date
20 Nov 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer, Panchayat (R&B) Division, Mahisagar
Construction of Bridge on Hirapura to Kherava Road at Ch: 01/700 M, Ta. Santrampur, Dist. Mahisagar
363939
14 of 2026-27
Open
Civil Works - Bridges
Works
Mahisagar
8 documents required · 8 mandatory
₹6,000
Executive Engineer, Panchayat (R&B) Division, Mahisagar
₹3.3 L
6 Nov 2026
6 Nov 2026
6 Nov 2026
20 Nov 2026
6 Nov 2026
120 days
Name of Work : Construction of Bridge on Hirapura to Kherava Road at Ch: 01/700 M, Ta.
Santrampur, Dist. Mahisagar
BILL OF QUANTITIES
Item Description of Item (with brief specification and reference to book of
Quantity Unit Rate Amount
No. specifications)
1 Carry out alignment survey work by total station including marking of
centre line of the bridge and approach road and various other
component structures, taking ground levels and details of existing
structures within 40m from centre line, providing and fixing necessary
reference pillars, establishing bench marks, establishing foundation
layout on ground, including submission longitudinal section, cross
section and report of survey work in three copies with soft copy in CD
to Engineer-in-charge as directed.
2 Dismantling the existing structure including removing and stacking with
All lead & Lifted dismantled materials as and where directed. (A) R.C.C. 1200.00 Cum 930.35
3 Excavation for foundation in sand, gravel, clay soft soils and murrum
etc. including shoring, strutting dewatering as necessary and disposing
of the excavated stuff as directed. (A) Depth upto 3.0 M. and lead upto 1846.00 Cum 511.11
100m for 10 Cum.
4 Excavation for foundation in hard murrum and boulders and very stiff
or sticky, clays and other similar strata including shoring and strutting
and dewatering as necessary and disposing of the excavated stuff as 805.00 Cum 611.32
5 Providing and fixing mild steel dowel bars of minimum 32mm dia. for
anchoring by drilling holes in foundation strata including necessary
bending, hooking of dowel bars and grouting the holes complete as per 447.00 Rmt 450.07
detailed drawing and as directed
6 Providing and casting-in-situ ordinary cement concrete M-150 for
R.C.C. Raft and cut-off walls including necessary shuttering laying, 481.00 Cum 3793.64
vibrating, ramming and curing complete.
7 Providing and casting-in-situ controlled cement concrete M-300 for
R.C.C. Raft and cut-off walls including necessary shuttering laying,
vibrating, ramming and curing complete. (Note: Cost of Mix design and 737.00 Cum 4879.51
admixture if required, not payable separately)
8 Providing and fixing in postion TMT Fe 550D Corrosion Resistant Steel
(CRS) bars of various diameter for all RCC works in piles, pile caps and
foundation as per detailed design & drawing and schedule including
cutting, bending, hooking the bars, binding with 18 SWG GI wires or
tack welding (Only for piles) and supporting as requried with all lifts
etc. complete including cost of all labour, materials, tools, plants,
equipment etc. all complete as directed by engineer and as per
9 Providing and casting in situ controlled cement concrete M-300 for
R.C.C. return as per drawings including centering shuttering,
scaffolding where necessary, laying vibrating, curing and finishing 223.00 Cum 5486.44
complete. (A) Height from 0.0 to 5.0 M. (1) Piers (2) Abutment (3) RCC
return (Note: Cost of Mix design and admixture if required, not
payable separately)
10 Providing and casting in situ controlled cement concrete M-300 for
R.C.C. return as per drawings including centering shuttering,
scaffolding where necessary, laying vibrating, curing and finishing 35.00 Cum 5812.53
complete.(B) Height from 5.0 to 10.0 M. (1) Piers (2) Abutment (3) RCC
return (Note: Cost of Mix design and admixture if required, not payable
11 Providing and casting-in-situ controlled cement concrete M-300 for
R.C.C. work in pier cap, abutment cap and dirt wall including controlled
cement concrete M-300 bed blocks or pedestals of required size below
bearings as per detailed drawings, centering, shuttering, scaffolding, 91.00 Cum 5460.79
wherever necessary, laying vibrating, curing and finishing complete.
(Note: Cost of Mix design and admixture if required, not payable
12 Supplying fitting and fixing in position true to line and level tar paper
bearings confirming to IRC : 83 Part 2 section IX and Clause 2005, of
Morth Specifiactions complete including all accessories as per drawings 86.00 Sqm 80.80
and specificaions.
13 Providing and laying weep hole in abutment and returning by using
A.C. pipes of 100mm diameter including laying in proper grade and 420.00 Nos 86.73
joining etc. complete as per detailed specification.
14 Supplying and laying high strength flexible geogrids (HSFG) as soil
reinforcement / basal reinforcement as per MORTH 3100 and IRC
made of high tenacity polyester core with polyethylene coating with
minimum Long Term Design Strength (LTDS) of more than 50% of
ultiMate tensile strength at 30 degree Celcius corresponding to 12 %
strain etc. complete and as directed by Engineer - In - Charge.
15 Supplying & laying of drainage composite for use behind walls,
between two different fills, alongside drains of road, below concrete
lining of canals etc. Geocomposite for planar drainage, realized by
thermobonding a draining core in extruded monofilaments with two
filtering nonwoven geotextiles that may also be working as separation
or protecting layers. The draining three dimensional core will have a
“W” configuration as longitudinal parallel channels. Minimum
thickness to be 7.2mm, with two filtering UV stabilized polypropylene
nonwoven geotextile of minimum thickness of 0.75 mm having pores 394.00 Sqm 831.23
of 150 micron and tensile strength of 8.0 kN/m that will be working as
separation or protecting layer, geocomposite having in plane flow
capacity of 2.1 L / (m.s) at hydraulic gradient of 1.0 & 20 kpa pressure
and tensile strength of 18 kN/m , with mass per unit area of 740 gsm,
supplied in the form of roll for easy transportation to site of work as
per detailed specification all complete as per directions of Engineer in
16 Providing and filling sand behind abutments and between returns in
layers as directed. 336.00 Cum 467.68
17 Providing and fixing in postion TMT Fe-550D Corrosion Resistant Steel
(CRS) bars of various diameter for all RCC works in Abutment cap & Dirt
wall, Pier Cap as per detailed design & drawing and schedule including
cutting, bending, hooking the bars, binding with 18 SWG GI wires or
tack welding (Only for piles) and supporting as requried with all lifts
etc. complete including cost of all labour, materials, tools, plants,
equipment etc. all complete as directed by engineer and as per
18 Providing and casting in situ controlled cement concrete M-300 for
R.C.C. solid slab including centering, scaffolding, curing and finishing
complete. (Note: Cost of Mix design and admixture if required, not 488.00 Cum 5611.57
payable separately)
19 Providing and casting-in-situ controlled cement concrete M-300 for
approach slab including formwork curing and finishing complete.
(Note: Cost of Mix design and admixture if required, not payable
20 Providing and casting in situ controlled cement concrete M-400 for
average 100 mm thick wearing coat laid as directed dincluding
tamping, vibrating, finishing, curing and fillingin joints with bitumen 61.00 Cum 5718.24
complete. (Note: Cost of Mix design and admixture if required, not
payable separately)
21 Providing and fixing in postion TMT Fe 550D Corrosion Resistant Steel
(CRS) bars of various diameter for all RCC works in superstructure as
per detailed design & drawing and schedule including cutting, bending,
hooking the bars, binding with 18 SWG GI wires or tack welding (Only 78.60 MT 77515.66
for piles) and supporting as requried with all lifts etc. complete
including cost of all labour, materials, tools, plants, equipment etc. all
complete as directed by engineer and as per specification.
22 Providing and fixing in position Mild steel dowel bars in piercaps or
abutment caps for anchorage in fixed end as per detailed drawings 36.00 Nos 341.29
including cutting, bending and welding complete.
23 Providing and fixing in position Mild steel dowel bars in piercaps or
abutment caps for anchorage in free end as per detailed drawings 36.00 Nos 399.70
including cutting, bending and welding complete.
24 Reinforced Cement Concrete Crash Barrier (Provision of an Reinforced
cement concrete crash barrier at the edges of the road, approaches to
bridge structures and medians, constructed with M-400 grade concrete
with TMT Corrosion Resistant Steel(CRS) conforming to IRC:21 and
dowel bars 25 mm dia, 450 mm long at expansion joints filled with pre-
moulded asphalt filler board, keyed to the structure on which it is built 162.00 Rmt 4644.99
and installed as per design given in the enclosure to MOST circular No.
RW/NH - 33022/1/94-DO III dated 24 June 1994 as per dimensions in
the approved drawing and at locations directed by the Engineer, all as
specified). (Note: Cost of Mix design and admixture if required, not
payable separately)
25 Providing and applying one coat Epoxy Phenolic primer of DFT
micron and two coats of Epoxy Phenolic coating of DFT 100 microns
each or any other equivalent epoxy coating system to all concrete
surfaces for Crash Barrier including cost of material, labour,
transportation, scaffolding and preparing the surfaces by cleaning,
washing, brushing, sand/ grit blasting etc. complete and as directed by
Engineer and as per specification. ( Paint shall be got approved from
Engineer and tested from approved laboratory).
26 Providing Yellow and Black Patta three coats including distempeing
three coats with oil bound distemper of approved brand and
manufacture and of required shade on wall surfaces to give an even
shade, over and including a priming coat with distemper primer of
approved brand and manufacture after thoroughly brushing the
surface free from mortar dropping and other foreign matter and also
including preparing the surface even and sand papered smooth as per
instruction of Engineer Incharge.
27 Providing and Fixing RCC M-300 architecture pylons at end of Approach
structures including all materials, labour, ramming,curing etc. 3.00 Cum 5486.44
Complete as per detailed working drawing
28 Providing and placing in position Corrosion Resistant Steel (CRS)
Fe500D bar including cutting, bending, hooking, and tying complete as
per detailed drawing.(B) T-Beam and Deck slab type of superstructure
(I) Deck slab (II) Main and cross Girder.
29 Providing P.V.C. 100 mm diameter water spouts including necessary
iron gratings as per drawings. 24.00 Nos 159.37
30 Providing and laying Double walled corrugated pipes (DWC) of
Polyethylene (Conforming to IS: 14930-II) of 150 mm Dia. with fittings
and necessary connecting accessories of same material at required 162.00 Rmt 205.03
depth for laying table below Crash Barrier etc. Complete as per specs
and as directed by Engineer-In-Charge.
31 Providing and carrying out load test on bridge deck with simulated
loading including provision, placing and removal of loading, supplying,
fixing and removing deflection measuring instruments etc. complete
with platforms for fixing the instruments etc. complete as per the 150.00 MT 169.92
details supplied and specification and as directed by Engineer and
including submission of required results in triplicate after satisfactory
completion of the load test.
32 Providing and fixing metal expansion joints as per drawings. Details of
expansion joint 50 x 50 x 6mm size two IS and 100 x 6mm MS plate
with 6 x 20 x 25mm long hold fast @ 50 cm / cc on both sides of 59.00 Rmt 2013.95
expansion joints.
33 Providing and fixing marble slab including engraving and painting
complete. (i) Size 75cm x 60cm x 4cm.
34 Providing flood gauge marks on substructure as per design including
painting complete. 10.00 Rmt 163.02
35 Cat Eye / Road Stud / RPM: Supplying Raised Pavement Markers made
of polycarbonate and ABS moulded body and reflective panels with
Micro prismatic lens (No Glass bead lens) capable of providing total
internal reflection of the light entering the lens face and shall support a
load of 13635 Kgs. tested in accordance to ASTM D4280 Type H and
complying to Specifications of Category A of MORTH Circular No
RW/NH/33023/10-97-DO iii 11061997 The height, width and length
shall not exceed 20 mm, 130 mm and 130 mm and with minimum
reflective area of 13 Sqcm on each side and the slope to the base shall
be 35 +/- 5 degree. The body of the marker should having finger grip
for easy and accurate placement and application with epoxy /
bituminous Adhesive as recommended by the manufacturer of the
marker. The color of the marker should be as per the IRC 35-2015 and
as directed by Engineer-In-charge.
36 Earthwork for embankment including breaking clods, dressing with all
lead and lift and including watering rolling and consolidation of
subgrade in layers at O.M.C. to required dry density including filling the 2878.00 Cum 172.31
depression which occur during the process using power roller 8T to
10T. (D) From Borrow area within 2.0KM. lead
37 Granular earth filling in approach (As per MOSRT&H section 3100)
including laying of earth as per Sp. For compaction in layers of 250 mm
thick loose layers and dressing (as per MOSRT&H Sp. Cl. 303.3.5) by
mechanical means using motor grader including watering the earth to
bring the earth upto required OMC including rolling with the use of 291.00 Cum 408.04
vibratory roller when earth is at suitable moisture content with desired
field density (Modified proctor test) The material for filling shall
confirm to IRC Highway Research Special Report No-16
38 (Provision of an Reinforced cement concrete crash barrier at the edges
of the road, approaches to bridge structures and medians, constructed
with M-20 grade concrete with HYSD reinforcement conforming to
IRC:21 and dowel bars 25 mm dia, 450 mm long at expansion joints
filled with pre-moulded asphalt filler board, keyed to the structure on 24.00 Rmt 1379.66
which it is built and installed as per design given in the enclosure to
MOST circular No. RW/NH - 33022/1/94-DO III dated 24 June 1994 as
per dimensions in the approved drawing and at locations directed by
the Engineer, all as specified) (i) M 25 grade concrete
39 Providing and casting-in-situ ordinary cement concrete M-200 for
R.C.C. Raft and cut-off walls including necessary shuttering laying, 7.00 Cum 4615.20
vibrating, ramming and curing complete.
40 Providing panel wall for dry stone pitching in uncourased rubble
masonary with had stone of approved quality in cement. mortar 1.5 14.00 Sqm 2650.76
including curing etc, complete.
41 Providing and laying Filter material underneath pitching in slopes
complete as per drawing and Technical specification
42 Supplying, stacking & spreading Quarry spall on road side for hard side
shoulder of work as per specification including rolling & watering 542.00 Cum 916.07
43 Providing , laying and spreading 150 mm Granular sub base (Grade-I)
by providing close graded B.T.M.C. material single layer with motor
graderon prepared surface, mixing by mix in place method with 303.00 Cum 1997.38
rotovator at OMC and compacted with vibratory roller 80 to 110 kn
static weight to achive desire density etc. completed.
44 Providing and laying compacted WBM of Grading-I MCBT metal of size
63 mm to 45 mm in required layers including using 16% stone
screening 13.2mm size and 8% stone dust as filler including spreading 82.00 Cum 2031.11
watering & consolidation by vibratory roller etc. as per MoRTH
45 Providing and laying compacted WBM of Grading - II MCBT metal of
size 53 to 22.4 mm in required layers including using 24% stone
screening 11.2 mm size and 8% stone dust as filler including spreading 66.00 Cum 1924.05
watering & consolidation by vibratory roller etc. as per MoRTH
Specification compelete as directed by Engineer - in - Charge.
46 Providing & laying Bituminous grout 37.50 mm thick with asphalt of
grade of VG-30 at the rate of 1.99% by weight of mix for mixing using
B.T.Chips of required gradation including cleaning and heating asphalt
premix materials by hot mix process in proper gradation and laying
with paver finisher and consolidation by roller of 8 to 10 tonnes
including cost of all materials,Asphalt,aggregates, labour
Charges,royalty charges etc.completed as directed. including flushing
key aggregate @0.13 Cum/10 Sq.m.
47 Providing laying and rolling 25 mm thick open graded premixed
bitumineous carpet with B.T. aggregate as specified and using bitumen
for mixing with agreegate at the rate of 3.36 % i.e 33.60 kg/M.T. of
total mix including heating and mixing in drum mix plant and spreading
the same with paver finisher and consolidation with power roller 33.00 Cum 4061.21
including necessary firewood, oil, lubricants, labour charges etc. using
contractor's own drum mix plant and equipment, tool etc. completed
in accordance with the requirement of specification.
48 P & L Bitumen seal coat with 0.18 Cmt/ 10 Smt. of stone chips 6mm
size & binder grade VG-30 content at the rate of 4.50 % by total weight
of mix . Hot mix laying process is including heating the asphalt
aggregate continuous batching, transporting the mix and spreading the 24.00 MT 4875.27
same by paver finisher & consolidation with power roller including
providing necessary fire wood, oil, lubricant, labour charges, higher
charges of machinery etc, complete.
49 Providing and fixing guard stone as per I.R.C. type design including
white washing etc. complete.(ii) Fixing in C.C. 1:5:10. 8.00 Nos 350.80
50 Road marking with hot applied thermoplastic paints with reflectorising
glass beads on bitumin surface providing and laying a hot applied
thermoplastic compound 2.5 mm thick including reflectorising glass
beads@ 250gms per sqm area, thickness of 2.5mm is excluding of
surface applied glass beds as per IRC:35- 2015. The finished surface to
be level, uniform and free from streaks and holes. zebra patta /bump
patta lane/center line/ edge line/cut patta. The white color markIng 55.00 Sqm 367.72
should Povide liminance coefficinet on cement road shalll be min
mcd/m2/lux and Asphalt road shall be min 100 mcd/m2/lux during the
service life during the day time. The marking should meet the
performance criterla for night time reflectivity, wet reflectivity and skid
resistance as mentloned in the section-15 of IRC 35-2015 warrenty for
retro reflectivity shall be two years.
51 Village name/ Bump Ahed sign :-Providing and fixing sing boards made
out of 2mm aluminium sheet; size 90 x 60cms. rectangle as as per the
design of IRC-67-1977 pre treated with phospheting process & acid
etching; coated with one coat of epoxy primer and two coats of best
quality epoxy paint; reflectorised with retro refiective sheeting as per
latest M.O.S.T. Specifications; Letters and numerals should be as per
IRC-30-1968, 3.1m long (2 nos) stand post and frame fabricated from 2.00 Nos 5045.36
suitable size iron angle of 50 x 50 x 5mm painted with best quality
epoxy coatings in black and white bends. the details of symbol or
inscription / numerals for each board shall be as per the instruction of
engineer in charge. The fixing at site shall be in 1:2:4 CC block of size
x 45 x 60cms. for each leg. including excavation curing etc. complete
under the supervision of engineer in charge.(A) Engineer Grade(VR)...
52 Distance Informatory/ Destubatuib sign :Providing and fixing sing
boards made out of 2mm aluminium sheet; size 180 x 120cms.
rectangle as as per the design of IRC-67-1977 pre treated with
phospheting process & acid etching; coated with one coat of epoxy
primer and two coats of best quality epoxy paint; reflectorised with
retro refiective sheeting as per latest M.O.S.T. Specifications; Letters
and numerals should be as per IRC-30-1968, 3.1m long (2 nos) stand
post and frame fabricated from suitable size iron angle of 50 x 50 x 4.00 Nos 10926.57
5mm 75 x 75 x 6mm as required; painted with best quality epoxy
coatings in black and white bends. the details of symbol or inscription /
numerals for each board shall be as per the instruction of engineer in
charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x
60cms. for each leg. including excavation curing etc. complete under
the supervision of engineer in charge.(A) Engineer Grade(VR)...
53 Regulatory/Mandatory signs :Providing and fixing sing boards made
out of 2mm aluminium sheet; size 60cms. diameter circle as per the
design of IRC-67-1977 pre treated with phospheting process & acid
eteching; coated with one coat of epoxy primer and two coats of best
quality epoxy paint; reflectorised with retro refiective sheeting as per
latest M.O.S.T. Specifications; 3.1m long stand post and frame
fabricated from suitable size iron angle of 35 x 35 x 3mm 75x75x6mm 6.00 Nos 3439.81
as required; painted with best quality epoxy coatings in black and
white bends. the details of symbol for each board shall be as per the
instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC
block of size 45 x 45 x 60cms. for each leg. including excavation curing
etc. complete under the supervision of engineer in charge.(A) Engineer
54 Chevron sign :-Providing and fixing sign boards made out of 1.5mm
aluminium sheet / 3mm ACP (Aluminum composite Panel); size
60x50cm rectangular as per design of IRC-67-2012. Pre treated with
phospheting process & acid etching; coated with one coat of epoxy
primer and two coats of best quality epoxy paint ; reflectorised with
High Intensity Prismatic Grade retro refiectivesheeting of Type-4 as per
ASTM D-4956 and latest M.O.S.T.Specifications; 3.3 mtr long stand post
of Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as required and
frame fabricated from suitable size iron angle of35x35x3mm; painted
with bestquality epoxy coatings in black and white bends. the details of 15.00 Nos 3711.75
symbol or inscription / numerals for each board shall be as per the
instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC
blockof size 45 x 45 x 60 Cms. for each leg including excavation, curing
etc.complete under the supervision of engineer in charge. A warranty
for 7 years for the Retro reflective sheeting from original manufacturer
& a certified copy of 3 year outdoor exposure test report from third
party test lab for the product offered shall be submitted by contractor.
(A) Class-B Type-4 Retro Reflective sheeting
55 Earthwork in cutting including preparing the slope and camber
andstacking or utilising the cutting stuff in bank as directed upto 200 6.00 Cum 260.57
Meters from the end of cutting with all lead and lift.(i) Hard murrum.
56 Clearing and Grubbing Road Land .(Clearing and grubbing road land
including uprooting rank vegetation, grass, bushes, shrubs, saplings
and trees girth up to 300 mm, removal of stumps of trees cut earlier
and disposal of unserviceable materials and stacking of serviceable 1.00 Hector 28455.09
material to be used or auctioned up to a lead of 1000 metres including
removal and disposal of top organic soil not exceeding 150 mm in
thickness.) (By Mechnical Means)
57 Earth work for embankment for breaking clods, dressing with all lead
and lift and including watering, rolling and consolidation of subgrade
in layers at O.M.C. to required dry density, including filling the 66.00 Cum 160.14
depressing, which occurs during the process using power roller of
tonne to 10 tonne all as per specification.
58 Providing and applying evenly Tack coat with bitumin Emulsion (RS1)
on prepared surface of granular base including cleaning of road surface
and spraying primer at the rate of 2.50kg/10Smt using mechanical
59 Providing & laying 20 mm thick M.S.S. with B.T. aggregate (as per
M.O.R.T.&H. gradation) & bitumen grade 60/70 for mixing at the rate
of 5.09 % (i.e. 50.90 Kg./M.T.) by wt. Of total mix & with michenical
sprayer including heating & mixing in drum mix plant & transporting
mix material & spreading the same with paver finisher & consolidation 20.00 MT 5366.04
with vibratory roller of 8 tone to 12 tone & flushing sand or stone dust
at the rate of 0.03 Cum./10 Sqm. including cost of fuel, hire charges,
wood, kerosene, labour charges etc. & with contractor's own
machinery & plant including supplying etc. complete.
60 Diversion sing board :-Providing & Fixing sign boards made out of 2mm
aluminium sheet, size 180 x 60 cms. rectangle as per the attached
drawing pre treated with phospheting process & acid etching. coated
with one coat of epoxy priemr and two coats of best quality epoxy
paint reflectorised with retro reflective sheeting as per latest M.O.S.T.
Specifications; Letters and numerals should be as per IRC-30-1968,3.1m
long (2nos) stand post and frame fabricated from iron angle of
35x35x3mm, 50x50x5mm painted with best quality epoxy coatings in
blak and white bends. The fixing at site shall be in 1:2:4 CC block of size
45 x 45x 60cms for each leg, including excavation curing etc. complete
under the supervision of engineer in charge.(A) Engineer Grade(VR)...
61 Supplying and fixing reinforced concrete heavy duty non-pressure
pipes with collars for culverts including setting and joining the pipes in
C.M. 1:2 watering and laying (To level of slops of I.S. 458 / 1971 Class 75.00 Rmt 6621.26
NP4 of following internal diameter.
(iv) 1200 mm dia.
In Words: Rupees Three Crore Twenty-Six Lakh Forty-Six Thousand Two Hundred Sixty-Nine and Paise Fifty-Eight Only.
I/We am/are willing to carry out the work at… % above/below percent(Should be written in figures and words) of the estimated
rate mentioned above. Amount of my /our tender works out as under.
* Estimated Amount * Estimated Amount
put to tender put to tender
Deduct :…………% Below Add :………%Above
In Words …………………………………… In Words………………………………
* (Please strike out whichever is not applicable).
1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge
for which no extra payment shall be made.
2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3 GST and Income tax TDS will be deducted at a source while making payments of bills
4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017
Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per
actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at
the rate of input rate mentioned in all the tender.
5 The amount of dismentalled credit materials at Rs. 1075009.67 shall be deducted from first R.A. Bill.
6 The Contractor will have to submit the mix design for different grades of Cement Concrete & Asphalt at his own cost
before execution as directed and to be approved from the engineer in charge.
Dy. Executive Engineer Executive Engineer
Panchayat R & B Sub Division Panchayat R & B Division
Santrampur Lunawada
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
1 E Tender Notice.pdf
1_PDFsam_132 GRs SBD with Index.pdf
26_PDFsam_132 GRs SBD with Index.pdf
66_PDFsam_132 GRs SBD with Index.pdf
106_PDFsam_132 GRs SBD with Index.pdf
2 Vol 1 SBD Book.pdf
3 VOL 2 Specification index.pdf
5 BOQ.pdf
6 Drawing.pdf
0 CHECKLIST.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .